Lediga jobb som Civilingenjör, maskin i Göteborg

Se lediga jobb som Civilingenjör, maskin i Göteborg. Genom att välja en specifik arbetsgivare kan du även välja att se alla jobb i Göteborg som finns hos arbetsgivaren.

Design Studio Engineer

Ansök    Jul 15    Randstad AB    Civilingenjör, maskin
Arbetsbeskrivning Randstad Digital söker nu efter en erfaren ingenjör för att tillhandahålla övergripande ingenjörsstöd till ett Produktdesignteam genom alla faser av produktdesignprocessen, inklusive avancerad design och avancerad teknik. Randstad Digital är din karriärpartner inom IT och digital transformation. Som konsult hos oss får du konkurrenskraftig lön, förmåner och kollektivavtalade villkor. Din konsultchef, som alltid finns nära till hands, ser ... Visa mer
Arbetsbeskrivning
Randstad Digital söker nu efter en erfaren ingenjör för att tillhandahålla övergripande ingenjörsstöd till ett Produktdesignteam genom alla faser av produktdesignprocessen, inklusive avancerad design och avancerad teknik.
Randstad Digital är din karriärpartner inom IT och digital transformation. Som konsult hos oss får du konkurrenskraftig lön, förmåner och kollektivavtalade villkor. Din konsultchef, som alltid finns nära till hands, ser till att du får varierande och utvecklande uppdrag på olika företag, inom olika branscher. Som din karriärpartner tillämpar vi vår talangcentrerade strategi som sätter din utveckling i fokus, vilket hjälper dig att uppnå din fulla potential och öppnar upp för nya spännande karriärmöjligheter. Ansök senast 2024-08-29 på www.randstad.se. Har du frågor, kontakta [email protected] eller [email protected]. För oss är det viktigt att all kompetens och färdigheter på arbetsmarknaden tas tillvara. Vi välkomnar alla sökande och strävar efter mångfald. Observera att du behöver vara tillgänglig inom 1 till 2 månader. Intervjuer och återkoppling kommer ske mellan v.33-v.34.

Ansvarsområden
Säkerställa att ingenjörs- och designkrav för projekt förstås, ifrågasätts och delas inom Produktdesign och Teknik.
Stödja studions arbete och säkerställa korrekt teknisk och geometrisk status för fysiska modeller, mockups och ergonomiska modeller.
Säkerställa en helhetssyn genom att balansera krav mellan teknik och design genom att ligga i framkant av ingenjörstrender, systemverktyg, verktyg och utvecklingsprocesser.
Säkerställa att leveranser från Produktdesign håller nödvändig teknisk kvalitet.
Stötta juniora teammedlemmar och kollegor.
Vara en förebild för livslångt lärande, dela kunskap och utveckla andra som tränare och/eller coach.
Fördjupa sig inom sitt eget område, men också bygga en bredare T-formad profil.
Utveckla inflytande och arbeta självsäkert inom det bredare nätverket inom fordonsindustrin.
Tydligt artikulera hur man skapar värde inom sitt område för produktutveckling och affärsenheter.


Kvalifikationer
Avancerad kunskap som vanligtvis erhålls genom utbildning och arbetslivserfarenhet (positionen kräver normalt 5 års relevant erfarenhet).
Erfarenhet av att stödja design- och ingenjörsteam genom alla faser av produktdesignprocessen.
Stark förmåga att balansera tekniska och designmässiga krav.
Förmåga att leda och inspirera teammedlemmar samt att vara en mentor och coach.
Erfarenhet av att arbeta inom fordonsindustrin och förståelse för dess unika utmaningar och möjligheter.

Vi erbjuder en spännande möjlighet att vara en del av ett dynamiskt team och att bidra till att forma framtiden för fordonsdesign och -teknik. Om du är en driven och passionerad ingenjör med en vilja att dela kunskap och utveckla dig själv och andra, vill vi gärna höra från dig!

Om företaget

Randstad
På Randstad vet vi att alla människor har en plats på arbetsmarknaden. Med verksamhet över hela landet och inom alla kompetensområden hjälper vi människor att hitta ett jobb som känns bra, och där de får möjlighet att växa, utvecklas och uppnå sin fulla potential.

Med närmare 600 000 anställda i 38 länder är Randstad världsledande inom HR-tjänster, med målsättningen att bli världens främsta och mest uppskattade partner på arbetsmarknaden. Genom att kombinera vår passion för människor med kraften i dagens teknologi hjälper vi människor och företag att uppnå deras fulla potential. Vi kallar det Human Forward. Visa mindre

Åmål: Ingenjör inom maskinteknik eller liknande

Vi ser gärna kvinnliga sökanden till denna tjänsten, då vi strävar efter en mera jämställd fördelning bland våra medarbetare. Vill du ta nästa steg i din karriär och tillhöra ett segment som växer varje månad. Vi behöver nu fler engagerade och kompetenta medarbetare till vår sektion med kontor i Åmål.  En sektion med interna såväl som externa projekt och lösningar mot kund. Som person tror vi att du gillar att bidra med idéer och trivs med att jobba i pr... Visa mer
Vi ser gärna kvinnliga sökanden till denna tjänsten, då vi strävar efter en mera jämställd fördelning bland våra medarbetare. Vill du ta nästa steg i din karriär och tillhöra ett segment som växer varje månad.

Vi behöver nu fler engagerade och kompetenta medarbetare till vår sektion med kontor i Åmål.  En sektion med interna såväl som externa projekt och lösningar mot kund.

Som person tror vi att du gillar att bidra med idéer och trivs med att jobba i projektform. Du gillar att ansvara för ditt arbete och kan utföra det självständigt samtidigt som du gillar att samarbeta med olika kompetenser och människor där alla har samma mål och där ni tillsammans måste hitta rätt väg att nå målet!

Är du yrkesverksam ingenjör, konstruktör inom mek- och anläggningskonstruktion och vill arbeta på ett av Europas ledande bolag?

Då vill vi gärna komma i kontakt med dig! Visa mindre

UTE EFTER EN NY UTMANING INOM IT/TEKNIK?

Ansök    Jul 15    Friday Väst AB    Civilingenjör, maskin
Vill du ta dig an en ny jobbutmaning till hösten? Har du ett brinnande intresse inom IT eller teknik och vill utvecklas inom områden som mjukvaru-, hårdvaruutveckling, testning, inköp eller liknande? Nu förbereder vi inför höstens rekryteringar och tar gärna ett karriärssamtal för att diskutera potentiella möjligheter för just dig! Välkommen in med din ansökan! VAD VI KAN ERBJUDA DIG:  Vi på Friday fungerar som en karriärspartner och är intresserade av a... Visa mer
Vill du ta dig an en ny jobbutmaning till hösten? Har du ett brinnande intresse inom IT eller teknik och vill utvecklas inom områden som mjukvaru-, hårdvaruutveckling, testning, inköp eller liknande? Nu förbereder vi inför höstens rekryteringar och tar gärna ett karriärssamtal för att diskutera potentiella möjligheter för just dig! Välkommen in med din ansökan!

VAD VI KAN ERBJUDA DIG: 

Vi på Friday fungerar som en karriärspartner och är intresserade av att träffa dig med ett genuint intresse och kunskap inom IT- eller teknikområdet för att kunna matcha dig mot våra partnerföretag. Vi söker dig som är nyexaminerad eller som har något/några års erfarenhet inom IT- eller teknikbranschen. För att kunna matcha din kunskap, erfarenhet och önskemål jobbar vi med partnerföretag inom olika branscher, i olika storlekar och med olika teknikinriktningar. De finns placerade i hela västra Götaland. Vi erbjuder dig jobbmöjligheter inom bland annat medtech, fintech, automotive, aerospace, greentech och elektrifiering, inom det marina samt mycket mer!

VI SÖKER DIG SOM: 

Har en eftergymnasial utbildning inom IT eller teknik. Oavsett om du är nyexaminerad eller redo för nästa steg i karriären finns vi här för dig! Vi söker dig som är intresserad av roller inom bland annat: 

Frontend-, backend- och/eller fullstackutveckling 
Embeddedutveckling 
Applikationsutveckling 
Mekatronik eller Automation
Mjukvarutestning
Mekanik- och/eller elkonstruktör
Elektronikingenjör
IT- och/eller on site-support
Devops  
BI/BA
Inköp/Logistik eller kvalité


Vidare bör du: 

Kunna tala och skriva obehindrat på svenska samt engelska då den stora majoriteten av våra partnerföretag använder båda språken internt samt externt. 
Ha ett tekniskt intresse samt lätt att förstå och ta till dig ny teknik, nya tillvägagångssätt samt metoder. 


Stor vikt kommer läggas vid personlig lämplighet och vi tror att du är en driven och initiativtagande person som fungerar likväl i team som självständigt. Det är meriterande om du har hobbyprojekt att visa upp och/eller relevant arbetslivserfarenhet. 

ÖVRIG INFO: 

Ansök genom att klicka på ”Sök tjänst”. Om du har en profil som vi tror passar något eller några av våra partnerföretag kommer vi slå dig en signal så kan vi prata vidare. Därefter bjuder vi eventuellt in dig på ett första karriärssamtal där vi får lära känna varandra bättre! 

OM FRIDAY: 

Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter. 

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! 

Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik. Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Durability Feature Analyst

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

At Durability & Reliability within Customer Feature Verification you will perform the durability analysis work required to support requirement setting and test code development in the durability feature team. You will be a key player in our team's efforts to adapt and evolve requirements methodology based on measurements and customer data.

Your future team
Our team consists of durability & reliability feature engineers, feature analysts and data analysts and we are all working towards the same goal – to make our customers happy. If you are driven to create a better, safer, and more sustainable future, then this is the right place for you.


Who are you?

Do you dream big? We do too, and we are excited to grow together. In this role, you will bring: 
* Several years experience as durability simulation engineer
* Several years experience of automotive product development
* Good understanding of the relation between customer usage, requirement setting, product development and verification in a durability context.



What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy:  
* Great colleagues. You will become part of a very skilled team that will provide great opportunity to grow and develop as a durability engineer
* The possibility to shape how we work with one of Volvo's most important features



Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Apply today! f you have any questions about the position do not hesitate to reach out to hiring manager Mikkel Grymer on LinkedIn or by phone on +46 31 66 50 00.
Last application date is 11th of August 2024. Please note that due to vacation period in Sweden we will not review or initiate contact with candidates before week 33.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Durability Feature Engineer

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

At Durability & Reliability within Customer Feature Verification you will define and follow up requirements, development activities, virtual and physical verification across the company with respect to durability. You will participate in the definition and execution of our team's efforts to adapt and evolve requirements methodology based on measurements and customer data.

Your future team
Our team consists of durability & reliability feature engineers and feature analysts. We all work towards the same goal – to make our customers happy. If you are driven to create a better, safer, and more sustainable future, then this is the right place for you.


Who are you?

Do you dream big? We do too, and we are excited to grow together. In this role, you will bring: 
* Several years experience as durability simulation or verification engineer
* Deep theoretical skills within durability
* Several years experience of automotive product development, with focus on durability.
* Good understanding of the relation between customer usage, requirement setting, product development and verification in a durability context.



What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy:  
* Great colleagues. You will become part of a very skilled team that will provide great opportunity to grow and develop as a durability engineer
* The possibility to shape how we work with one of Volvo's most important features



Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Apply today! f you have any questions about the position do not hesitate to reach out to hiring manager Mikkel Grymer on LinkedIn or by phone on +46 31 66 50 00.
Last application date is 11th of August 2024. Please note that due to vacation period in Sweden we will not review or initiate contact with candidates before week 33.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Instrument engineer/technician in MedTech

Ansök    Jul 10    Randstad AB    Civilingenjör, maskin
Job description We at Randstad Life Sciences are currently looking for instrument engineers and/or technicians in the field of life science for future full-time consultant positions. Randstad Life Sciences is specialized in competences within Life Science. As a consultant you get a competitive salary, benefits and collective agreements. Your consultant manager ensures that you get varying and developing assignments at different companies, within different ... Visa mer
Job description
We at Randstad Life Sciences are currently looking for instrument engineers and/or technicians in the field of life science for future full-time consultant positions.
Randstad Life Sciences is specialized in competences within Life Science. As a consultant you get a competitive salary, benefits and collective agreements. Your consultant manager ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Life Sciences, your personal development is in focus, and you are offered a large network and many social activities.
The scope of the initial assignment varies depending on the client and the assignment. As this is an "open advertisement" to cover future assignments, we have not set yet an assignment length, but the average is approx. 6 months. You will acquire competencies necessary to perform independent work in an industrial environment. As an instrument engineer/technician you will be responsible for installing, monitoring, and maintaining control systems and machinery needed in a medical technology company. 

Responsibilities
Develop I/O Lists and Instrument Indexes
Develop schematics, drawings, work instructions/method statements in accordance with best practice
Preparation of instrumentation specifications 
Develop Instrument data sheets and take responsibility of the complete and verification life cycle  
Consult with clients, project team and contracts managers to develop a full understanding of technical requirements                                    
Cooperation with internal and external stakeholders.  

For us, it is important that all competence and skills in the labor market are given equal chances. We welcome all applicants and strive for diversity.
Deadline 31 October - the selection process and interviews will be ongoing
For more information: Please contact Meriem Echbarthi, [email protected].
Please note that applications sent through email will not be processed and deleted due to GDPR.

Qualifications
Academic degree in a relevant instrumentation Engineering discipline, preferably related with medical technologies
Minimum of 2 years experience in a  company involved in delivering Instrumentation & Control (I&C) designs for the MedTech, Pharmaceutical and Life Science Sectors
Ability to deliver automation and systems scopes of works and contribute to or develop functional specifications (FS) and user requirements specifications (URS) for these
Excellent level of attention to detail and accuracy
Good communication skills in both English and Swedish.

Your personal qualities are important and to succeed as a consultant at Randstad Life Sciences, you need to be passionate about science, curious, well-organized and quality focused. You are a person with good communication skills who can easily work both individually and in teams, you have an open mindset with a flexible and adaptable approach. Moreover you are eager to learn and have a good ability to take initiative. Since the role involves close collaboration with colleagues and other stakeholders, you are comfortable reaching out to other people and can effectively build a network of personal relations. It is also important that you are open to try new roles and that you easily adapt to new situations.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Teknisk Inspektör

Vi söker en person som kan; Utför specialistarbete som utföra inspektion uppdrag för produktion. Ansvarar för kvalitets och produktionskontroller inom projekter. Prata Engelska och Persiska Microsoft office Visa mer
Vi söker en person som kan;
Utför specialistarbete som utföra inspektion uppdrag för produktion.
Ansvarar för kvalitets och produktionskontroller inom projekter.
Prata Engelska och Persiska
Microsoft office Visa mindre

Group Manager Project Build PE & Emob

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Your future team:

The Project Builds Powertrain and Emob group is a part of the Product Builds organization within Complete Vehicle Sweden, Group Trucks Technology. Product Builds lead the cross functional work from an order received until the project build is delivered to the customer according to agreement, supported by a quick and effective logistic supply chain.
Project Builds Powertrain and Emob has the cross functional lead to secure physical prototype builds supporting development of engines, gearboxes and electromobility components.

The group works in close cooperation with different product development departments, manufacturing, GTT workshops and our internal prototype purchasing & procurement team.
We are continuously striving to develop the Product build organization and way of working to be leaner and more efficient in supporting product development.

This is how you could make an impact:

As a Group Manager, you will lead and support the daily operations in the team to assist product development and deliver prototype builds in agreed time for verification and validation. You will together with the team continue to develop way of working and system support needed to increase effectiveness and efficient in our deliveries. Continue to strengthen the collaboration bridge between the project builds teams is also a main priority. Maintaining the good team spirit, cooperative atmosphere, and proudness to deliver in the team is also how you can contribute.

Who are you?

We believe you are an inspiring and positive person with several years of leadership experience as a manager or X-functional leader within the automotive product development or manufacturing industry. With your background you lead by example and promote cross functional collaboration.
You are known for your integrity, trust and managerial courage. You have an open and positive attitude, great people skills and strong ability to empower, guide and support team members in developing their skills and full potential.
Continuously learning and adapting is something you take pride in and welcome changes if needed to ensure your own or the team’s performance. You see data as a way to manage ambiguity and to secure objective and fact-based decisions and development way of working. You hold a Bachelor of Science or a Master of Science in mechanical, electrical or industrial engineering.

Ready for the next move?

If you want to make a real impact in your career, the transportation business is where you want to be. We look forward to meeting you so apply today! Last application date is 25th of August. 
Any question, feel free to contact Maria Flink, Director Product Builds HD Europe, 073 902 7508.
Please note that due to vacation period in Sweden we will not review or initiate contact with candidates before week 33. 



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Industrialization Project Manager

We are building a state-of-the-art Gigafactory that will be one of the largest cell production facilities in Europe. We are now looking for an Industrialization Project Manager to join our Engineering team! Volvo Cars is one of the most well-known and respected car brands in the world. Northvolt is a leading supplier of sustainable, high-quality battery cells and systems, dedicated to delivering the world’s greenest lithium-ion battery. Together, we... Visa mer
We are building a state-of-the-art Gigafactory that will be one of the largest cell production facilities in Europe. We are now looking for an Industrialization Project Manager to join our Engineering team!



Volvo Cars is one of the most well-known and respected car brands in the world. Northvolt is a leading supplier of sustainable, high-quality battery cells and systems, dedicated to delivering the world’s greenest lithium-ion battery.



Together, we have formed a joint venture, NOVO Energy, to power the next generation of pure electric Volvo cars.

Our Engineering team is coalition of specialists, engineers and technical project managers across a broad range of technical disciplines. Together they work toward the shared goal of scaling and industrializing the production of our lithium-ion battery technology that will help Volvo transform into a pure electric car manufacturer.



What you will do
We are looking for a dedicated and driven Industrialization Project Manager to join us in our mission to contribute to a greener future. This role is based in Västerås at Northvolt Labs during the first ~12 months, after that your long-term role will be based in Gothenburg where you will be a key player in establishing large scale battery factories and successfully launching customer projects.



The task is to drive the industrialization of customer projects from initiation to start of production. You will coordinate several enabler functions as part of your core team and closely cooperate with the overall project team to enable a successful launch and ramp-up and a systematic handover to the production plant.

The diverse and highly motivated team of industrialization project managers closely work with all relevant functions to ensure successful industrialization of our products from project initiation to closing.



Key responsibilities include but are not limited to:

- Lead industrialization projects according to the Northvolt industrialization project framework
- Actively drive the industrialization work packages and deliverables by coordinating between the relevant functions and enablers in the organization
- Drive fulfilment of customer requirements in the project and represent the industrialization status towards our customers
- Anticipate risks and actively seek mitigations, address need for support where necessary
- Ensure transparency of the status and forecast with regards to timing, quality and cost

Skills & requirements:
We believe that you have the ability to work well with others in a multi-cultural team environment, as well as independently. You see the importance of cross functional collaboration and have good problem-solving skills. You are driven and passionate to motivate teams achieving demanding targets. We believe that you have:



- Relevant BCs/MSc degree in engineering
- Minimum 2 years of experience working in battery industry
- At least 5+ years relevant working experience within Project Management, preferably in battery or automotive industry
- Proven track record in operations or project management
- The flexibility to spend a certain period in our Northvolt Labs in Västerås and other production plants during onboarding and early project phase
- Leadership skills in an international and multicultural environment
- Excellent English written and oral skills

Merit if you have:

- Experience in both greenfield and brownfield projects
- International work experience
- Proficiency in other languages

For your onboarding, you will spend ~12 months in facilities in Västerås, Sweden.


Volvo Cars is one of the most well-known and respected car brands in the world. Northvolt is a leading supplier of sustainable, high-quality battery cells and systems, dedicated to delivering the world’s greenest lithium-ion battery. Together, we have formed a joint venture, NOVO Energy, to power the next generation of pure electric Volvo cars.



Our Gigafactory in Gothenburg will be one of the largest cell production facilities in Europe, with a potential annual cell production capacity of up to 50 gigawatt hours (GWh) - thereby enabling a supply of batteries for approximately half a million Volvo cars per year. Our state-of-the-art R&D facility will gather leading expertise from all over the world, to create the next generation battery cells.



You can read more about this joint venture in these press releases, here and here. Visa mindre

Systemkonstruktör Mekanik

Ansök    Jul 1    SAAB AB    Civilingenjör, maskin
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld. Din roll Som systemkonstruktör är du med i produktutvecklingens alla faser: Idé, implementationsförslag, kostnadsskattning, systemarbete, I&V samt produktion. En viktig del är att kunna bryta ner komplexa system till tydliga realiserbara delar och att vägleda konstruktörer genom utvecklingsarbetet. Du är också intresserad av att förstå den större bilden ... Visa mer
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld.

Din roll

Som systemkonstruktör är du med i produktutvecklingens alla faser: Idé, implementationsförslag, kostnadsskattning, systemarbete, I&V samt produktion. En viktig del är att kunna bryta ner komplexa system till tydliga realiserbara delar och att vägleda konstruktörer genom utvecklingsarbetet. Du är också intresserad av att förstå den större bilden av hur allt hänger ihop, och att använda den för att fatta beslut utifrån teknikbehov, strategi och affärsmässighet.

Arbetet innebär kontakter med många personer och förutsätter ett strukturerat arbetssätt med god ordning och reda. Du kommer att arbeta i ett team kopplat till olika utvecklingsprojekt som bedrivs parallellt.

Sektionen Subsystem Design på PU Fighter Radar är idag en grupp på ca 13 personer som ansvarar för utveckling och verifiering av RF-delsystemets högsta sammansatta nivå. Gruppens arbete är i grunden tvärdisciplinärt men med tre specialiseringar: RF, mekanik och mjukvara. Produktmässigt arbetar vi med Gripen Radar, EW-system för stridsflyg, samt missilelektronik.

Din profil

Vi tror att du har flera års erfarenhet av systemkonstruktion mekanik eller som beräkningsingenjör. Du har intresse för systemdesign som ett tvärdisciplinärt arbete och har förmågan att med hjälp av överslagsberäkningar göra bedömningar om en konstruktions hållfasthetsegenskaper. Vi ser att du har god kännedom om att arbeta med kravnedbrytning och ett strukturerat arbetssätt och vana att ta fram teknisk dokumentation. Vi tror vidare att du har:

* Relevant högskoleutbildning, exempelvis Civilingenjör inom Farkostteknik, Maskin eller Teknisk Fysik, gärna med inriktning mot hållfasthet och/eller strukturanalys

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap

Vad du blir en del av

Bakom våra innovationer finns alla de som har gjort det möjligt. Modiga pionjärer och kluriga tänkare. Vardagshjältar och kreativa problemlösare. De som delar djup kunskap och de som utforskar nya områden. Och alla däremellan.

Här har du chansen att påverka och bidra på ditt unika sätt. Allt från att utveckla kod och bygga imponerande försvars- och säkerhetslösningar till att ta en kaffe med en kollega. Varje bidrag räknas. Vi ger dig möjlighet att anta utmaningar och skapa smarta innovationer. I vår vänliga och tekniksmarta värld finns plats för dig att växa. Vi finns här för att tillsammans skapa trygghet för människor och samhällen.

Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 22 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga. Läs mer om oss här Visa mindre

Documentation Engineers

Ansök    Jul 3    Randstad AB    Civilingenjör, maskin
Job description In this role, you will contact system engineering teams to clarify any ambiguities or obtain missing information, and you will follow up on the progress of these tasks. You will actively participate in workshops and conduct site visits to physically research and understand the systems. Your responsibilities will include writing technical content in XML for a range of purposes including system descriptions, maintenance instructions, and faul... Visa mer
Job description
In this role, you will contact system engineering teams to clarify any ambiguities or obtain missing information, and you will follow up on the progress of these tasks. You will actively participate in workshops and conduct site visits to physically research and understand the systems. Your responsibilities will include writing technical content in XML for a range of purposes including system descriptions, maintenance instructions, and fault-finding guides. You will review, update, and translate technical documentation to ensure accuracy and relevance, as well as proofread documents and create or update illustrations as needed. Additionally, you will manage and update document revisions to maintain up-to-date and effective documentation. You will also attend both customer and internal meetings to ensure that all requirements are met and that there is effective communication and feedback throughout the project.

Responsibilities
The main tasks of the positions include:
To gather technical information and deliver accurate technical documentation for maintenance and operation manuals.
Contact system engineering for clarification or missing information and follow up on progress.
Participate in workshops and site visits to physically research the systems.
Write technical content in XML for descriptions, maintenance instructions, fault-finding instructions, etc.
Review, update, and translate technical documentation.
Attend meetings regarding both internal and customer meetings to ensure requirements are met


Qualifications
Candidates must possess a Master of Science in Engineering (Civilingenjör) or an equivalent degree. This advanced education should ideally be in a field related to mechanical engineering, electrical engineering, or a similar discipline. The ideal candidate will have a solid foundation in technical principles and practical applications, enabling them to effectively gather and process complex technical information for documentation purposes.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Systemkonstruktör RF med intresse för teknisk innovation

Ansök    Jul 1    SAAB AB    Civilingenjör, maskin
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld. Din roll Som systemkonstruktör är du med i produktutvecklingens alla faser: Idé, implementationsförslag, kostnadsskattning, systemarbete, I&V samt produktion. En viktig del av arbetet innebär förmåga att kunna bryta ner komplexa system till tydliga realiserbara delar och att vägleda konstruktörer genom utvecklingsarbetet. För att lyckas behöver du ha fle... Visa mer
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld.

Din roll

Som systemkonstruktör är du med i produktutvecklingens alla faser: Idé, implementationsförslag, kostnadsskattning, systemarbete, I&V samt produktion. En viktig del av arbetet innebär förmåga att kunna bryta ner komplexa system till tydliga realiserbara delar och att vägleda konstruktörer genom utvecklingsarbetet. För att lyckas behöver du ha flera års erfarenhet som konstruktör av avancerade RF-nära system. Du är också intresserad av att förstå den större bilden av hur allt hänger ihop, och att använda den för att fatta beslut utifrån teknikbehov, strategi och affärsmässighet.

Arbetet innebär kontakter med många personer och förutsätter ett strukturerar arbetssätt med god ordning och reda. Du kommer att arbeta i ett team kopplat till olika utvecklingsprojekt som bedrivs parallellt.

Sektionen Subsystem Design på PU Fighter Radar är idag en grupp på ca 13 personer som ansvarar för utveckling och verifiering av RF-delsystemets högsta sammansatta nivå. Gruppens arbete är tvärdisciplinärt men med tre tydliga specialiseringar: RF, Mekanik och mjukvara. Produktmässigt arbetar vi med Gripen Radar, EW-system för stridsflyg, samt missilelektronik.

Din profil

Vi tror att du har flera års erfarenhet av antenn- och mikrovågskonstruktion. Du har intresse för systemdesign som ett tvärdisciplinärt arbete, god kännedom om att arbeta med kravnedbrytning och ett strukturerat arbetssätt och vana att ta fram teknisk dokumentation. Vidare tror vi också att du har:

* Relevant högskoleutbildning, exempelvis Civilingenjör E eller F med RF-inriktning
* Praktisk erfarenhet av integrations- och verifieringsarbete i labbmiljö inklusive instrumenthantering och dataanalys
* Goda kunskaper i Matlab, HFSS & ADS

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap

Vad du blir en del av

Bakom våra innovationer finns alla de som har gjort det möjligt. Modiga pionjärer och kluriga tänkare. Vardagshjältar och kreativa problemlösare. De som delar djup kunskap och de som utforskar nya områden. Och alla däremellan.

Här har du chansen att påverka och bidra på ditt unika sätt. Allt från att utveckla kod och bygga imponerande försvars- och säkerhetslösningar till att ta en kaffe med en kollega. Varje bidrag räknas. Vi ger dig möjlighet att anta utmaningar och skapa smarta innovationer. I vår vänliga och tekniksmarta värld finns plats för dig att växa. Vi finns här för att tillsammans skapa trygghet för människor och samhällen.

Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 22 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga. Läs mer om oss här Visa mindre

Mechanical Design Engineer within Inverter Design

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
About the role:
As a Hardware Mechanical Design Engineer, you will play a key role in developing electrical hardware and electric motor drive systems. Collaborating in a dynamic environment, you'll work with skilled engineers and engage with internal and external partners. Bring your visionary thinking, enthusiasm, strong knowledge, and effective communication skills to this role, elevating our work to new heights and contributing to the development of next-gen technologies in a team environment.

Your major responsibilities are the following:
•    Providing Volvo Group with support and expertise within the competence area
•    Contributing to development work with suppliers and technology partners
•    Leading process planning with a strategic approach
•    Participating and providing process and technical results in product development projects
•    Evaluating technical solution and preparing technical requirement and documents
•    Collaborating and conducting test plan, time plan and supporting engineers within the team
•    Work cross functional with both internal and external suppliers

To succeed in this role, it is essential to possess the following qualifications:
•    Master's degree (M.Sc.) or higher in Mechanical Engineering, Hardware Electrical Engineering, or Automotive Engineering.
•    A minimum of 2 years of hands-on involvement in automotive product development.
•    Proficiency in electric product development and design, particularly in electric motor drives and inverters.
•    Familiarity with CAE packages for thermal, CFD, or mechanical simulations.
•    Knowledge of Geometric Dimensioning and Tolerancing (GD&T).
•    Practical experience in assembly, commissioning, and decommissioning processes.
•    Proven expertise in developing technical requirements in collaboration with suppliers.
•    Familiarity with automotive standards, requirements management tools, and process tools.
•    Fluency in spoken and written English. 
Also, you should demonstrate the following personal attributes:
•    Decision-making skills, showcasing the ability to balance available facts and exercise judgment within given time frames.
•    Effective team engagement in a collaborative manner, with a commitment to achieving results and performance excellence.
•    A solution-oriented mindset, actively seeking opportunities and embracing innovative approaches.
•    A structured yet creative approach to problem-solving.
•    Strong networking skills across various functions.
•    Perseverance and commitment to follow through on tasks.

The position title can be customized based on the candidate’s personal competences. 
You will be working within Electric Motor Drive team (in Electromobility Department) which is managed by Emad Samadaei, Group Manager Electric Motor Drive. 
We are looking forward your application, no later than April 15th, 2024.

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Robotics Engineer

Robotics engineer Job description? 1. Cooperate with industrial robot application, external axis and bus configuration, programming, teaching, linkage and other work; 2. Complete the connection guidance and communication configuration of cables and safety equipment of industrial robots and their auxiliary equipment as required; 3. Complete debugging of related equipment and industrial robots and optimization of process timing and process quality according ... Visa mer
Robotics engineer
Job description?
1. Cooperate with industrial robot application, external axis and bus configuration, programming, teaching, linkage and other work;
2. Complete the connection guidance and communication configuration of cables and safety equipment of industrial robots and their auxiliary equipment as required;
3. Complete debugging of related equipment and industrial robots and optimization of process timing and process quality according to process documents and technical requirements;
4. Complete fault handling of industrial robots and their auxiliary equipment and training of Party A's personnel during the project;
5. Collected and sorted out the problem points in the project process, summarized and completed the report;
6. Complete other tasks assigned by superiors
Job Requirements:
1. College degree or above in automation related field;
2. More than 2 years of robot debugging experience in body-in-white industry;
3. Be familiar with at least one makers, parts, new energy, such as VW, CJLR, BMW, Daimler, TESLA, VOLVO, CHERY, GESTAMP, CATL standards such as robot, Proficient in commissioning and configuration of at least one robot such as ABB/KUKA/FANUC/MOTOMAN.
4. Have good English speaking and reading ability;
5. Strong logical thinking ability, good language expression and organization ability;
6. Proficient in office automation software, familiar with Auto-CAD and other software;
7. Upright, honest, good at communication, serious and responsible work, rigorous and meticulous, have a good team spirit.
8. Adapt to long-term business trips and can work under pressure Visa mindre

Åmål: Ingenjör inom maskinteknik eller liknande

Vi ser gärna kvinnliga sökanden till denna tjänsten, då vi strävar efter en mera jämställd fördelning bland våra medarbetare. Vill du ta nästa steg i din karriär och tillhöra ett segment som växer varje månad. Vi behöver nu fler engagerade och kompetenta medarbetare till vår sektion med kontor i Åmål.  En sektion med interna såväl som externa projekt och lösningar mot kund. Som person tror vi att du gillar att bidra med idéer och trivs med att jobba i pr... Visa mer
Vi ser gärna kvinnliga sökanden till denna tjänsten, då vi strävar efter en mera jämställd fördelning bland våra medarbetare. Vill du ta nästa steg i din karriär och tillhöra ett segment som växer varje månad.

Vi behöver nu fler engagerade och kompetenta medarbetare till vår sektion med kontor i Åmål.  En sektion med interna såväl som externa projekt och lösningar mot kund.

Som person tror vi att du gillar att bidra med idéer och trivs med att jobba i projektform. Du gillar att ansvara för ditt arbete och kan utföra det självständigt samtidigt som du gillar att samarbeta med olika kompetenser och människor där alla har samma mål och där ni tillsammans måste hitta rätt väg att nå målet!

Är du yrkesverksam ingenjör, konstruktör inom mek- och anläggningskonstruktion och vill arbeta på ett av Europas ledande bolag?

Då vill vi gärna komma i kontakt med dig! Visa mindre

Feature Engineer Reliability

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

In the position Reliability Feature Engineer at Durability & Reliability you will be our reliability expert for product development initiatives for the Complete Vehicle. You will have responsibility to secure the targeted quality level for our end customers. Work will be performed close to engineering departments and related features. We seek an engineer with a background in automotive product development and verification. Activities include: Identification of critical components and failure modes, suggestion of verification and validation activities such as simulations, component tests or complete vehicle tests, requirement setting, statistical analysis of tests and field data, test code development and FMEA participation. As Feature Leader, you are expected to take the lead in developing and implementing new methods for reliability analysis and development at Volvo GTT.

Who are you?

Do you dream big? We do too, and we are excited to grow together. In this role, you will bring:

* An M.Sc. or Ph.d. degree in Mechanical Engineering or similar, or equivalent professional experience.
* Working experience from the automotive industry, preferably within feature/attribute work, product development and verification.
* Ability to lead and coordinate.
* Experience analyzing life data and employing statistical methods to predict reliability at both component and systems levels.
* Experience of feature/attribute work, e.g. reliability, durability or similar feature/attribute lead in an automotive application
* Experience planning and validating reliability tests for entire vehicles.
* Data analytics skills and proficiency developing methodologies to facilitate data-driven decision-making.


What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy:  

* Great colleagues
* The possibility to shape how we work with one of Volvo's most important features
* Build your network. As reliability feature leader you will be involved in development work across Volvo from project start to final verification.


Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Apply today! If you have any questions about the position do not hesitate to reach out to hiring manager Mikkel Grymer on LinkedIn or by phone on +46 31 66 50 00. Last application date is 4th of July 2024.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Kompositingenjör

Ansök    Jun 24    SAAB AB    Civilingenjör, maskin
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld. Din roll Du kommer vara en del av vårt Material & Process-team som ansvarar för införandet av nya material, utveckling av materielsystem med tillhörande processer samt medverkar i vår teknikutveckling. Genom ditt uppdrag kommer du utgöra en stark röst i den fortsatta utvecklingen av Saabs världsledande produkter inom radar. Vår sektion Material and Pro... Visa mer
Drivs du av att se dina idéer bli verklighet? Välkommen till vår spännande och teknikintensiva värld.

Din roll

Du kommer vara en del av vårt Material & Process-team som ansvarar för införandet av nya material, utveckling av materielsystem med tillhörande processer samt medverkar i vår teknikutveckling. Genom ditt uppdrag kommer du utgöra en stark röst i den fortsatta utvecklingen av Saabs världsledande produkter inom radar.

Vår sektion Material and Process Engineering stöttar samtliga produktområden inom den flygande, marina och landbaserade domänen som utvecklas på Saab Surveillance i Göteborg. Gruppen jobbar brett med alla olika materialslag. Just nu händer det väldigt mycket hos oss på kompositområdet med flera spännande satsningar där material och tillverkningsprocessfrågorna kommer att vara centrala.

Dina huvudsakliga arbetsuppgifter är:

* Vara med och ta fram och kvalificera kompositmaterialsystem
* Stötta produktutvecklingen i alla faser från koncept och systemkonstruktion till detaljkonstruktion, verifiering och leverans
* Arbeta med provningskampanjer
* Arbeta med tillverkningsprocesser i samarbete med våra leverantörer. (Det kan ev innebära både resor och att visst arbete kan förläggas hos underleverantör.)
* Bidra till och driva teknikutveckling inom företaget



Vi erbjuder dig goda möjligheter att utvecklas tillsammans med oss och att arbeta med den senaste tekniken. Din vilja till utveckling och dina personliga egenskaper väger tungt.



Din profil

Detta arbete utförs självständigt, men i en sammansvetsad grupp. Du bör därför vara en person som trivs i ett team som tillsammans styr och fördelar arbete inom gruppen samt ha ett eget driv och vilja att lyckas och ta dina uppgifter i mål. Vi tror att du identifierar dig med egenskaper som god kommunikationsförmåga, flexibilitet och samarbetsvilja. Vi söker dig som har:

* Civilingenjörsexamen från farkostteknik, maskinteknik eller motsvarande med inriktning mot fiberkompositer.
* Utmärkt kommunikationsförmåga på svenska och engelska, både i tal och skrift
* Praktisk erfarenhet av arbete med komposittillverkning och materialprovning samt produktutveckling inom industrin är meriterande.



Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Vad du blir en del av

Bakom våra innovationer finns alla de som har gjort det möjligt. Modiga pionjärer och kluriga tänkare. Vardagshjältar och kreativa problemlösare. De som delar djup kunskap och de som utforskar nya områden. Och alla däremellan.

Här har du chansen att påverka och bidra på ditt unika sätt. Allt från att utveckla kod och bygga imponerande försvars- och säkerhetslösningar till att ta en kaffe med en kollega. Varje bidrag räknas. Vi ger dig möjlighet att anta utmaningar och skapa smarta innovationer. I vår vänliga och tekniksmarta värld finns plats för dig att växa. Vi finns här för att tillsammans skapa trygghet för människor och samhällen.

Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 22 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga. Läs mer om oss här Visa mindre

Mechanical Engineer in Electromobility

Ansök    Jun 17    AFRY AB    Civilingenjör, maskin
Company Description AFRY provides engineering, design, digital and advisory services. We are devoted experts in industry, energy and infrastructure sectors, creating impact for generations to come. AFRY has Nordic roots with a global reach. Join us in accelerating the transition towards a sustainable society. Job Description Are you a dedicated mechanical engineer and experienced in electromobility? Do you thrive in collaborative environments and enjoy ... Visa mer
Company Description
AFRY provides engineering, design, digital and advisory services. We are devoted experts in industry, energy and infrastructure sectors, creating impact for generations to come. AFRY has Nordic roots with a global reach. Join us in accelerating the transition towards a sustainable society.


Job Description
Are you a dedicated mechanical engineer and experienced in electromobility? Do you thrive in collaborative environments and enjoy tackling challenges? Then we have the perfect opportunity for you!
We are looking to expand our dynamic team with a mechanical engineer specializing in electromobility components and technologies. In this role, you will work closely with both internal teams and external partners. Your expertise lies in mechanical applications towards electrical driveline in areas such as traction batteries, electrical storage systems or EV engines.
As an Electromobility Engineer at AFRY, you will oversee the design, prototyping, and testing of electric vehicle systems and components. Your responsibilities will include coordinating product development activities, reviewing and releasing technical documentation and models, and developing validation plans.


Qualifications
Bachelor’s or Master’s in Mechanical/Mechatronics engineering or equivalent.
Skills in CREO/CATIA.
At least 4 years of proven experience from mechanical design within the electromobility area. For example, within ESS, battery system or EV engines.
Experience from working in cross-functional teams and close contact with external suppliers.
Fluent in Swedish and English.
Meritorious: KDP, TCPLM, Teamcenter


If you are enthusiastic about electromobility and eager to make a difference, we would love to hear from you. Apply now to join AFRY and be a part of our exciting journey! Last application date is 5th of July.
Questions about the role? Please contact our section manager!
Johanna Svensson - [email protected]


Additional Information
Why should you work with me? - Hiring Manager Johanna Svensson
My experience spans both product development projects and teaching. This unique combination of skills makes me a responsive leader, adept at quickly addressing both major and minor crises. I strive to create an enjoyable work environment and take pride in seeing my employees grow and achieve their goals.
AFRY also offers you
You will work in interesting areas and environments with varying tasks. Your development is central and we will try to find the assignment that suits you and your development. You will belong to a successful global company and work together with inspiring and committed employees. We see each employee as an important piece of the puzzle in our joint success and work actively to create a developing and pleasant work environment through personal leadership. Above all, we have fun together!
Do you want to get to know more about the people at AFRY and our benefits? Read more on the link: https://afry.com/en/join-us/get-know-us
#LI-hybrid #catia #mechanical #automotive
At AFRY, we engineer change in everything we do. Change happens when brave ideas come together. When we collaborate, innovate technology, and embrace challenging points of view. That’s how we're making future. We are actively looking for qualified candidates to join our inclusive and diverse teams across the globe. Join us in accelerating the transition towards a sustainable future. Visa mindre

Surface Material Specialist, CAB Living, Gothenburg

If you have an interest in the technical aspect of surfaces and surface materials this is the perfect position for you! Position description Are you passionate about materials, colours and surface quality? How to make hard requirements possible while giving the customer a strong first impression through nice-looking high-quality surfaces? The Volvo GTT, CAB Living team, is looking for a new employee in Surface Material team. Here you will work with all ... Visa mer
If you have an interest in the technical aspect of surfaces and surface materials this is the perfect position for you!

Position description
Are you passionate about materials, colours and surface quality? How to make hard requirements possible while giving the customer a strong first impression through nice-looking high-quality surfaces? The Volvo GTT, CAB Living team, is looking for a new employee in Surface Material team. Here you will work with all the visible surfaces of our Trucks. You will also have the chance to support our colleagues at Volvo Construction Equipment, Volvo Penta and Volvo Buses. 
Your future team
The Volvo GTT Surface Material team is a small group of five people within the Living team at Volvo GTT Cab Interior section. We are responsible for surface materials, including textiles, foils, nonwovens, and other materials, as well as surfaces such as plastic colors and grains, deco surfaces in paint, and other technologies. Our work are within, both the interior and exterior surfaces of trucks, collaborating closely with the Product Design team and other teams within Volvo for electronics, and chassis parts. The team is also responsible for the curtain system and seat upholsteries. The team not only work with Volvo Trucks but also support other Volvo branded products like excavators, wheel loaders, buses, and boat engines. The team has a strong and supportive spirit, helping each other to overcome obstacles. We work in an international environment with teams in India, France, and the USA. Our mission is to ensure that the surface materials and surfaces used in Volvo products are of the highest quality, focusing on user well-being, customer profitability, sustainability, and creating value for the Volvo Group. 

What you will do

You will lead the development of surface materials such as textiles, foils, nonwovens or leathers, ensuring Quality, Delivery, Cost, Features, and Sustainability (QDCFs) standards are met. The job also involve developing new colours and grains in plastics and other materials as well as deco materials such as paints and deco foils. You will develop the materials in collaboration with highly skilled suppliers and a supportive GTT team, in a deeply integrated collaboration with Product Design. Your main responsibilities will include:

•    Setting requirements and evaluating supplier work.
•    Managing the project timeline, changes, and cost evolution.
•    Acting as the primary technical contact for suppliers and leading their technical development efforts.
•    Communicating progress to various internal stakeholders, including lead engineers on several teams, product design, and purchasing.
•    Evaluating samples, including color and grain measurements.



Who you are
You have a strong background in developing surface materials, and you have worked with different materials and technologies. You have experience in setting requirements for surface materials and have led complex designs with multiple interfaces and stakeholders. You are confident in your knowledge, pragmatic in finding solutions, and skilled at balancing various demands. You have a documented proof of color vision and confidence in judging color, gloss, and surface finishes. You have experience transferring what you see into words, explaining what needs to change and how, to meet the requirements. Effective communication with internal and external stakeholders is second nature to you. You can maintain focus on objectives even under pressure, and you excel at explaining recommendations clearly. As a team player, you understand the importance of a committed timeline and your role in ensuring success.

Experience we seek:
•    M.Sc. or B.Sc. degree in textile engineering, technical design or equivalent knowledge gathered in other positions/degrees.
•    Minimum 10 years of experience in product development within the automotive industry.
•    Extensive experience leading Supplier Involvement Product Development of surface material development.
•    Very good knowledge in the development and requirement setting of textiles, foils, decor, and/or polymer materials regarding color, gloss, and graining.
•    Proficiency in communication and of requirement documentation.
•    Understanding of legal requirements and how it would affect us.
•    Familiarity with KOLA and MS Project
•    Proficiency in English, Swedish as a plus.
•    Familiarity with Agile methodologies and global team management.
What we offer
You get an opportunity to work with highly skilled colleagues in an exciting, global environment that provides opportunities to develop both professionally and personally. Our work is performed in an international environment, giving you the opportunity to interact with highly committed colleagues from different cultures. We trust the individual, act as a team, stay close to the product, and provide opportunities for growth.
Want to know more? Contact me!
Mattias Fransson, Group manager CAB Living, [email protected] application date 30rd of June. Visa mindre

Aftermarket Method Engineer (Service & Repair)

Aurobay has over hundred years of heritage in creating premium quality engines. With homes in Sweden and China, we have a strong reputation for pioneering practices in the automotive industry. We pride ourselves in our attention to detail and commitment to excellence. As an Aftermarket Method Engineer you will play a crucial role in developing and optimizing methods and processes for service and repair of our powertrain systems driving customer satisfacti... Visa mer
Aurobay has over hundred years of heritage in creating premium quality engines. With homes in Sweden and China, we have a strong reputation for pioneering practices in the automotive industry. We pride ourselves in our attention to detail and commitment to excellence.
As an Aftermarket Method Engineer you will play a crucial role in developing and optimizing methods and processes for service and repair of our powertrain systems driving customer satisfaction
What we offer In addition to a competitive salary, a great location on Lindholmen, and a genuine work-life balance, we provide the following benefits:
A yearly wellness contribution of SEK 5 000 for your physical and mental wellbeing.
A personal and professional development scheme to support your growth.
Additional pension funding.
Competitive additional and full coverage insurance.

Skills and Experience
Bachelor's degree in Mechanical Engineering, Automotive Engineering, or a related field
Minimum of 5 years of experience in method development for hybrid powertrain service and repair
Being able to create service and repair methods with digital tools and verify solutions in method workshop.
Excellent problem-solving skills and ability to work under pressure.
Strong communication and interpersonal skills, with the ability to convey technical information effectively.

Your role at Aurobay As an Aftermarket Method Engineer you will:
Develop, document, and implement effective service and repair methods for powertrain components
Collaborate with design and production teams to ensure the serviceability of new and existing powertrain products.
Analyze and optimize current repair processes to improve efficiency, quality, and cost-effectiveness.
Develop and maintain service manuals, repair instructions, and technical bulletins.
Provide technical support and support with training to service technicians and customer support teams.
Stay updated with industry trends, best practices, and emerging technologies related to powertrain systems.

Equal opportunities employer
We are an equal opportunities employer. We encourage candidates from underrepresented groups to apply, especially women, people from ethnic minority backgrounds, and people with disabilities. Research has shown that women and people from ethnic minority backgrounds are less likely to apply if they don't match 100% of the criteria. As a company, we value diversity and are committed to creating an inclusive environment. If you believe you have the skills and passion to excel in this role, we would love to hear from you. Let's explore the possibilities together.
How to apply
Deadline to submit your application is 26 June but the selection process will be running continuously. Please note that due to GDPR, we do not accept applications via email. We can’t wait to see what you can bring to our team!
Questions
If you have any additional questions regarding the position, you are welcome to contact recruiting manager Roland Lord, [email protected]
For questions regarding the recruitment process please contact Recruiter Clara Pryde, [email protected]
Questions concerning trade union:
Unionen: Ordf Joakim Dahlin, [email protected], +46 734 630 172
Ledarna: Ordf Håkan Modigh, [email protected],+46 733 333 801
Akademikerna:Ordf. Fredrik Fantenberg, [email protected], +46 728 889 790
IF Metall: Ordf Marko Borg Peltonen, [email protected], +46733333764 Visa mindre

Project Manager Professional (SG6) Exempt (01900668)

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Applying to this jo... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

Who we are
Good plans don’t just happen – they happen to be our business!

At the Project and Product Strategy Office we are proud to navigate and lead the Volvo Group’s transition into the future of sustainable transports. As Project Planning and Assurance Manager you will be part of a high performing team of experts within project and program management. To succeed with your tasks, you will use your expertise in project management together with some well proven methods and tools. You will work independently but you will not be alone. In our team of driven and passionate colleagues the culture is friendly and supportive.

What you will do
You will lead and influence the program/project planning and quality assurance activities in one of our major product development programs. By making sure that the programs successfully meet the program targets you are part of securing a predictable product launch to our customers. 

Your main focus is to secure predictable launch for running introduction, delivering a great new product to our customers. You will do that by having these core responsibilities:
•    Cross functionally secure and anchor the programs gates and end deliverables /milestones
•    Follow up on program progress
•    Defining, tracking, and leading activities concerning non conformances in the program work
•    Organizing program internal audits and presenting the program target status for decisions
•    Creating the Program Time Management Plan and creating alternative scenarios
•    Coordinating plans with related programs and streams
•    Leading the program risk management work and secure lessons learned

Who are you?
To be a project manager in program planning and assurance team you need to be structured and well-organized but still be able to adapt to new circumstances and situations easily. You deal constructively with problems that do not have clear solutions or outcomes. You work structured and analytical and are able to prioritize your work and handle multiple tasks. We do all our work in teams, so collaboration and communication skills are crucial. You are comfortable in navigating on your own in order to make difficult decisions in complex matters.

Required competences and experiences: We believe you have the following knowledge and experience
•    University/Master’s degree in engineering or equivalent
•    At least 5 years of work experience in relevant fields, i.e. project management of technical development
•    Knowledgeable in current project management methodologies, e.g., agile, waterfall, lean
•    Able to communicate clearly
•    Analytical and well organized, with a “Make it happen” mindset for challenging tasks

What’s in it for you?

We offer you an opportunity to work with the best of the best within program- and project management at Volvo, a possibility to gain knowledge within all different functions such as engineering, sales, production and purchasing. You do so in an open environment that appreciates your improvement proposals. Interested? Looking forward for your application.

Interested, don’t hesitate to contact me on [email protected] 

Helén Petersson, Manager Project Planning and Assurance, Gothenburg
We value your data privacy and therefore do not accept applications via mail.

Last application date: Jue 30th.


We value your data privacy and therefore do not accept applications via mail. Visa mindre

Interior Climate Test Engineer

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Wh... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Who we are
Volvo Group Trucks Technology (GTT) provides Volvo Group Trucks with state-of-the-art research, cutting-edge engineering, product planning and purchasing services, as well as aftermarket product support. We are a global team with energy, passion and drive, and with the aim to improve customer satisfaction. 

We are a team of NVH specialists and Climate test engineers within Complete Vehicle at Volvo Group Trucks Technology. All together we are about 20 team members currently. We have a strong team spirit and a family atmosphere within the group, where we support each other and we share our knowledge and experiences. We are now looking for a Test engineer within Interior Climate to join our team in Gothenburg - is it you?

What you will do
The responsibilities you will have in the role as a Test engineer within Interior Climate testing are both complex and fun! In this role you need to fully understand how the HVAC system operates and how to verify it’s performance. As a test engineer you are expected to work with the whole chain of the verification, from the planning phase to the execution. Climate testing, preparation for the test, documentation and reporting of results as well as participating in climate expeditions is part of your daily work. In order to succeed in this role you need to continuously develop your knowledge and skills according to the company’s knowledge within your area of expertise. 

Who you are
In this role you need to be communicative in order to explain complex measurement issues and solutions to your peer engineers in a way that enables non climate testing specialists being able to utilize the information. Further you need to be able to collaborate effectively with your colleagues both within and outside the team as well as working independently. 
In order to thrive in this role we see that you are able to adapt to sudden changes in planning and tasks due to external factors. We see that you work flexibly and enjoy problem solving.
You take ownership for your tasks and you are committed to deliver results even when facing challenging situations. 

We believe you have the following knowledge and experience:
•    Bachelor’s degree within Mechanical or Electrical Engineering
•    At least 3 years of experience within vehicle climate testing
•    Communicate in English fluently
•    Car drivers license is a requirement
•    Knowledge of vehicle HVAC system operation and function is a merit
•    Be prepared to travel approximately 6 weeks/year
•    Truck drivers license is a merit

At Volvo we are actively working to establish groups that will take maximum advantage of the strength inherent in our differences in knowledge, experience, age, gender and nationality.
For further information about the position, please contact:
Janos Turcsany, Group Manager NVH and Climate, [email protected]

Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site.
Last application date: June 30th.

We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Senior Surface Material Engineer, CAB Living, Gothenburg

Position description Are you passionate about materials, colours and surface quality? How to make hard requirements possible while giving the customer a strong first impression through nice-looking high-quality surfaces? The Volvo GTT, CAB Living team, is looking for a new employee in our Surface Material team. Here you will work with all the visible surfaces of our Trucks. You will also have the chance to support our colleagues at VCE, Volvo Penta and Vol... Visa mer
Position description
Are you passionate about materials, colours and surface quality? How to make hard requirements possible while giving the customer a strong first impression through nice-looking high-quality surfaces? The Volvo GTT, CAB Living team, is looking for a new employee in our Surface Material team. Here you will work with all the visible surfaces of our Trucks. You will also have the chance to support our colleagues at VCE, Volvo Penta and Volvo Buses. If you have an interest in the technical aspect of surfaces and surface materials this might be the perfect position for you!

Your future team 

The Volvo GTT Surface Material team is a small group of five people within the Living team at Volvo GTT Cab Interior section. We are responsible for surface materials, including textiles, foils, nonwovens, and other materials, as well as surfaces such as plastic colors and grains, deco surfaces in paint, and other technologies. Our work are within, both the interior and exterior surfaces of trucks, collaborating closely with the Product Design team. We also work with other teams within Volvo for interior, exterior, electronics, and chassis parts. The team is also responsible for the curtain system and seat upholsteries. Surface material team not only work with Volvo Trucks but also support other Volvo branded products like excavators, wheel loaders, buses, and boat engines. The team has a strong and supportive spirit, helping each other to overcome obstacles. We work in an international environment with teams in India, France, and the USA. Our mission is to ensure that the surface materials and surfaces used in Volvo products are of the highest quality, focusing on user well-being, customer profitability, sustainability, and creating value for the Volvo Group.


What you will do

As a Surface Material Engineer, you will lead the development of surface materials such as textiles, foils, nonwovens or leathers, ensuring Quality, Delivery, Cost, Features, and Sustainability (QDCFs) standards are met. The job will also involve developing new colours and grains in plastics and other materials as well as deco materials such as paints and deco foils. You will develop the materials in collaboration with highly skilled suppliers and a supportive GTT team, in a deeply integrated collaboration with Product Design. Your main responsibilities will include:
•    Setting requirements and evaluating supplier work.
•    Managing the project timeline, changes, and cost evolution.
•    Acting as the primary technical contact for suppliers and leading their technical development efforts.
•    Communicating progress to various internal stakeholders, including lead engineers on several teams, product design, and purchasing.
•    Evaluating samples, including color and grain measurements.



Who you are
You are on your way to build a strong background in developing surface materials, and you have worked with different materials and technologies over the years. You have experience in setting requirements for surface materials and have led designs with multiple interfaces and stakeholders. You are confident in your knowledge, pragmatic in finding solutions, and understand how to balancing various demands. You have a documented proof of color vision and confidence in judging color, gloss, and surface finishes. You know how to transferring what you see into words, explaining what needs to change and how, to meet the requirements. Effective communication with internal and external stakeholders is second nature to you. You can maintain focus on objectives even under pressure, and you excel at explaining recommendations clearly. As a team player, you understand the importance of a committed timeline and your role in ensuring success.

Experience we seek:
• M.Sc. or B.Sc. degree in textile engineering, technical design or equivalent knowledge and around 5 years of experience in product development within the automotive industry.
• Experience in leading Supplier Involvement Product Development (SIPD) of surface material development.
• Experience working in a global environment with multiple sites
• Good knowledge in the development and requirement setting of textiles, foils, decor, and/or polymer materials regarding color, gloss, and graining.
• Proficiency in communication and presentation techniques and proficiency of requirement documentation
• Understanding of legal requirements and how it would affect us.
• KOLA and MS Project is preferred.
• Proficiency in English,Swedish as a plus.
• Familiarity with Agile methodologies and global team management.
What we offer
You get an opportunity to work with skilled colleagues in an exciting, global environment that provides opportunities to develop both professionally and personally. Our work is performed in an international environment, with opportunity to interact with committed colleagues from different cultures. We trust the individual, act as a team, stay close to the product, and provide opportunities for professional and personal growth.
Curious and want to know more? Contact me! 
Mattias Fransson, Group manager CAB Living, [email protected], Last application date 30rd of June. Visa mindre

Lead Engineer, Interior lights, CAB Living, Gothenburg

If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Position description Have you always considered Micky Mouses caravan as one of the coolest things ever? Then look no further. In the Living team we develop world class interiors with the focus of life on board. In the living team we develop beds, storages, soft trims, refrigerators, coffee makers ... Visa mer
If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

Position description
Have you always considered Micky Mouses caravan as one of the coolest things ever? Then look no further. In the Living team we develop world class interiors with the focus of life on board. In the living team we develop beds, storages, soft trims, refrigerators, coffee makers and from time to time microvawe owens and much more.
Your future team: 
Living is a vital part of the Volvo GTT CAB interior section. Based in Gothenburg, our team holds global responsibility for the Living environment of Volvo heavy-duty trucks. With a team of 20 individuals from diverse backgrounds, ranging from seasoned engineers to juniors, and females and males we have a fantastic team. The team spirit is strong and supportive. Everyone help each other to meet our common goal. By having fun together we overcome the obstacles in front of us. Additionally, we are deeply integrated with teams in India, France and USA, forming a robust global network dedicated to advancing automotive technology within our area. Our primary focus lies in developing the life on board offer. Seeing to that our users has the best possible solutions to have a relaxing spare time during and after work. By offering a wide selection of functions you can spend days or weeks with out the need of going home. Livings responsibility stretches from beds, storage systems, soft trims such as headliners, wall trims and floor mats to interior lightning etc. There are few teams that has a stretch over such a wide spread of materials and technologies.  In the team we work from inhouse development to SIPD (supplier involved product development). Together, we have the responsibility and mission to ensure that the living environment continues to be the very best in the Volvo trucks. By doing our part with passion, we ensure that our products stay on top, focusing on our users' well-being, customers' profitability, sustainability, and creating higher value. Volvo trucks should continue to be the best trucks in the industry!

What you will do

As the Lead Engineer for the interior lightning, you will serve as an Engineering Task Leader (ETL). Your mission is to develop the interior light system.  You will lead the development process, ensuring Quality, Delivery, Cost, Features, and Sustainability (QDCFs) standards are met. Collaborating with highly skilled suppliers, that develop the components, and a supportive GTT team, your main responsibilities will include:

•    Setting requirements and evaluating supplier work.
•    Managing the project timeline, changes, and cost evolution.
•    Acting as the primary technical contact for suppliers and leading their technical development efforts.
•    Communicating progress to various internal stakeholders, including production, product design, purchasing and feature leaders, requiring strong communication skills to effectively coordinate across different teams.

Who you are
You have a strong engineering background, likely started as a design engineer, and developed a robust T-shaped profile over time. With experience in requirements setting of lightning systems, you have led complex designs with multiple interfaces and stakeholders. You are confident in your knowledge, pragmatic in finding solutions, and skilled at balancing various demands. Effective communication with internal and external stakeholders is second nature to you. You can maintain focus on objectives even under pressure, and you excel at explaining recommendations clearly. As a team player, you understand the importance of a committed timeline and your role in ensuring success.

Experience we seek:
• M.Sc. or B.Sc. degree in Mechanical or Mechatronic Engineering.
• Minimum 10 years of experience in product development within the automotive industry and many years of experience in developing injection-molded plastic components.
• Extensive experience leading Supplier Involvement Product Development (SIPD) of complex systems and requirement setting, preferably within interior lights system.
• Experience working in a global environment with multiple sites is preferred.
• Strong knowledge in the development of plastic components.
• Proficiency in communication and presentation techniques.
• Good knowledge of CATIA V5, including surface, part, and drawing design.
• Understanding of requirement documentation (TR writing) and legal requirements.
• Familiarity with PDM Link, KOLA, and MS Project is preferred.
• Proficiency in English, with Swedish as a plus.
• Familiarity with Agile methodologies and global team management.
What we offer
You get an opportunity to work together with highly skilled colleagues in an exciting, global environment which provides opportunities to develop both professionally and personally. Our daily work is performed in an international environment giving the opportunity to interact with highly committed colleagues from different cultures. We trust the individual and act as a team, stay close to the product and provide opportunities for professional and personal growth.
Curious and want to know more? Contact me! 
Mattias Fransson, Group manager CAB Living, [email protected]. Last application date 30rd of June. Visa mindre

Lead Engineer/ Project Manager

Ansök    Maj 31    A Hub AB    Civilingenjör, maskin
SeaTwirl AB (publ) is a Swedish energy-tech company with the vision to become a leading supplier of floating wind turbines and the purpose to enable floating offshore wind power wherever it is needed. SeaTwirl's unique floating vertical-axis wind turbine has a low centre of gravity, a slim substructure, and a generator house accessible at the sea surface enabling small, cost efficient, and locally available vessels to maintain it. SeaTwirl's first prototyp... Visa mer
SeaTwirl AB (publ) is a Swedish energy-tech company with the vision to become a leading supplier of floating wind turbines and the purpose to enable floating offshore wind power wherever it is needed. SeaTwirl's unique floating vertical-axis wind turbine has a low centre of gravity, a slim substructure, and a generator house accessible at the sea surface enabling small, cost efficient, and locally available vessels to maintain it. SeaTwirl's first prototype, a unit of 30 kW is installed in the water outside off Lysekil and has verified the design in marine environment. Development is now ongoing for larger floating wind turbines for different applications and sites. The company is listed on Nasdaq First North Growth Market since 2016.
We are now looking for our next colleague to join us in our office at Lilla Bommen, Gothenburg.
The position:
As a lead engineer you will have responsibility for development and integration of components and coordination with sub-contractors and colleagues to develop the mechanical system of drive train and support for SeaTwirl’s products and solutions. The work will be focused on management and development, 50/50, in our small, dynamic, and diverse team. The work will range from concept development to detail engineering and procurement. This type of challenge requires good assessment skills, understand complex engineering scope for the team while also have a keen eye for detailed engineering. Focus areas are for example drive train, brake system, cooling system, joining interface (bolts/welds) and manufacturing selection.
Main functions will include:
Project management (Timelines, milestones, and deliveries).
Product development (from concept to detailed drawings).
Ensuring that the projects deliverables are executed (follow-up yard work and system implementation).
Create and follow work-flow processes and manage engineering activities.
Interface with various sub-contractors and suppliers and negotiating contract when necessary.
Responsible for the on-time delivery of reports drawings and technical queries.

Requirements:
Master of Science in relevant area (for example: mechanical engineering, power electric engineering, naval architecture or construction).
Ability to work independently.
English proficiency is mandatory both written and spoken.
Yard or/and manufacturing experience.
Working experience within a relevant field.
Knowledge of industry standards: ABS, DNVGL, IEC, ISO, ASTM, etc

What will SeaTwirl offer:
SeaTwirl offers you an ambitious and highly motivated team with extensive technological expertise and entrepreneurial experience. The team provieds a strong base for the key technology development of floating wind turbines. SeaTwirl is a young, listed company with an international market, in an industry with a large growth potential. With the right background and ambitions, you will have a great potential to be successful at SeaTwirl.
Read more at: https://seatwirl.com
In this process SeaTwirl collaborates with A-hub, if you have any questions about the process please contact Emilie Englund, [email protected] Visa mindre

Utbildare- & Teknisk Supportspecialist till Husqvarna Construction Division

Är du en entusiastisk person med en passion för att dela kunskap? Har du ett tekniskt intresse eller bakgrund? Då är det här din chans att ansluta dig till Husqvarna Constructions nya team inom Eftermarknad och Service. Vi söker nu en nyckelperson som kan stödja våra kunder genom att erbjuda relevant kunskap och support.  Husqvarna grundades år 1689 och har i över 325 år erbjudit innovativa lösningar och högkvalitativa produkter inom skog, park och trädgår... Visa mer
Är du en entusiastisk person med en passion för att dela kunskap? Har du ett tekniskt intresse eller bakgrund? Då är det här din chans att ansluta dig till Husqvarna Constructions nya team inom Eftermarknad och Service. Vi söker nu en nyckelperson som kan stödja våra kunder genom att erbjuda relevant kunskap och support.
 Husqvarna grundades år 1689 och har i över 325 år erbjudit innovativa lösningar och högkvalitativa produkter inom skog, park och trädgård. Prestanda och användbarhet möter säkerhet och miljöomsorg i deras arbete där batterilösningar och robotteknik leder vägen. Husqvarna är idag en multinationell ledande röst i en bransch i konstant förändring
 
Vad Husqvarna kan erbjuda dig:
Hos oss på Husqvarna finns en stor möjlighet till professionell utveckling. Vi strävar efter att ha en arbetsmiljö som är inkluderande och mångfaldig, där vi tror att våra skillnader är våra styrkor. Därför går vi efter ledorden: Vi vågar, vi engagerar oss, vi bryr oss.
 
Om rollen:
Att bli en del av vårt team ger dig en spännande möjlighet att hålla serviceutbildningar och ge teknisk produktsupport på en marknad som sträcker sig över hela världen. Du blir en värdefull del av vår globala organisation samt en del av ett nytt och ambitiöst team.
Ditt huvudsakliga ansvar är att hålla serviceutbildningar och vara ett förstklassigt teknikstöd till våra marknader, kunder och samarbetspartners. Du kommer att bidra i vårt eftermarknadsteam med att bedöma utbildningsbehov för lokala helägda Husqvarnabolag, servicecenter, återförsäljare och partners.

Här får du arbeta med att: Utveckla och leda tekniska serviceutbildningar för våra produkter.
Ge teknisk support för kundproblem.
Framställa instruktionsvideor för service och reparation.
Samarbeta med lokala och centrala team för att hantera komplexa tekniska ärenden.
Driva utvecklingen av vår produkttekniska support.
Samla och utvärdera feedback från våra utbildnings- och supportaktiviteter.

 
Om dig:
Vi tror att du är en kundorienterad, självgående person med en god teknisk förståelse. Du trivs med att arbeta i en internationell miljö och är bekväm med att vara en presentatör och utbildare. I ditt arbete kommer du att ha frekvent kontakt med både kollegor och kunder över hela världen, vilket är varför det är viktigt att du är en öppen och kommunikativ person som är trygg med att kommunicera på engelska i både tal och skrift. Du har ett strukturerat arbetssätt och en god förmåga att arbeta tvärfunktionellt.

Vi ser även att du har: En teknisk bakgrund och förståelse för mekaniska och elektriska system inklusive mjukvaruprogrammering.
God administrativ kunskap inom MS Office
Gärna god kunskap i ytterligare något av de större europeiska språken
Tidigare erfarenhet inom eftermarknad och produktledning är en fördel.
 
Övrig information:
Tillträde: Omgående eller enligt överenskommelse
Plats: Denna position är primärt baserad i Jonsered utanför Göteborg, annan ort där Husqvarna idag är etablerat kan diskuteras. Vi tillämpar hybrid-arbetsplats.
 
Vad händer efter min ansökan?
Innan sista ansökningsdag har passerat går vi igenom din ansökan för att se hur väl din profil matchar kraven för tjänsten. Ser vi dig som en av våra potentiella kandidater kommer vi kontakta dig för en intervju. Om du inte går vidare i processen blir du informerad om detta senast när vi har tillsatt tjänsten. Vi intervjuar kandidater löpande och tjänsten kan komma att tillsättas innan sista ansökningsdag. Vänta därför inte med att söka! 
 
Denna rekrytering sköts av OnePartnerGroup i Göteborg, rekryterare Tania Benitez. För frågor om tjänsten maila [email protected]

Gällande ansökan så sker det via annonsen på OnePartnerGroups hemsida, vi hanterar inte ansökningar via mail på grund av GDPR.

Välkommen med din ansökan! Visa mindre

Fordonsintresserad Testingenjör till global jätte!

Ansök    Maj 23    Friday Väst AB    Civilingenjör, maskin
Är du snart färdigutbildad civilingenjör och vill vara en del av ett globalt företag inom fordonsindustrin? Besitter du sedan innan ett intresse för att mecka med bilar och vill kombinera dina erfarenheter med att arbeta hårdvarunära i in yrkesroll? Nu söker vår kund inom fordonsindustrin deras nästa Juniora Testingenjör! Om tjänsten I din roll som Testingenjör kommer du ha en bred och varierad roll. Du kommer ingå i ett team på totalt 16 personer och ... Visa mer
Är du snart färdigutbildad civilingenjör och vill vara en del av ett globalt företag inom fordonsindustrin? Besitter du sedan innan ett intresse för att mecka med bilar och vill kombinera dina erfarenheter med att arbeta hårdvarunära i in yrkesroll? Nu söker vår kund inom fordonsindustrin deras nästa Juniora Testingenjör!



Om tjänsten
I din roll som Testingenjör kommer du ha en bred och varierad roll. Du kommer ingå i ett team på totalt 16 personer och detta är ett relativt juniort team med olika bakgrunder, där du kommer få bra stöttning inledningsvis. Teamet fokuserar främst på testning av växellådan på lastbilar, det förekommer även testning av små komponenter till stora motorsystem och bakaxel. Utförandet av testerna du kommer utföra på daglig basis sker både i de olika riggarna och i vagnar. Du kommer främst jobba med hårdvara men med inslag av att jobba mjukvarunära då teamet arbetar nära fordonet. De främsta språk du kommer jobba med är Matlab och Python.

Detta är en fantastisk möjlighet för dig som är junior då du kommer få jobba med flera moment såsom programmering, provning och dataanalyser.



Vi söker dig som
Civilingenjör inom maskin alternativt mekatronik
Grundläggande kunskaper inom Python och MatLab
Talar och skriver obehindrat på svenska och engelska då språken används internt
Tidigare arbetslivserfarenhet inom något område


Då du kommer arbeta inom fordonsindustrin är det meriterande om du kan visa på fordonsintresse genom att till exempel gjort exjob mot fordon, ingått i Formula Student eller motsvarande förening. För denna tjänst sätter vi stor vikt vid dina personliga egenskaper. För att trivas i rollen tror vi att du beskriver dig som noggrann och ansvarstagande samt har ett intresse för struktur och ordning och reda. Vidare ser vi att du är van att ta egna initiativ för att driva ditt arbete framåt, och trivs med att ha tydliga mål och deadlines. Du har lätt för att kommunicera och trivs i ett samarbete med andra 



Om anställningen


Detta är ett konsultuppdrag vilket innebär att du kommer till en början att vara anställd av Friday. Ambitionen från Kunden och vår sida är att du efter 6–12 månader blir direktanställd hos kunden.

 Omfattning: Heltid
 Start: juni eller juli
 Kontaktperson: Stina Högström, [email protected]
Lön: Fast månadslön


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen.



Om Friday


Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter.

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik.

Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Ingenjör med fallenhet för miljötålighet

Ansök    Maj 20    SAAB AB    Civilingenjör, maskin
Vill du påverka och göra skillnad på riktigt? Här bidrar du till att skapa trygghet för människor och samhällen. Det du gör spelar roll. Din roll Som miljötålighetsingenjör i sektionen Environmental Engineering kommer du ingå i ett team som arbetar med beräkningar, analyser, kravställning och verifiering avseende våra radarprodukters tålighet mot vibration, stötlast, klimat och fukt med mera. Jobbet berör alla Surveillance radarprodukter, både till sjöss... Visa mer
Vill du påverka och göra skillnad på riktigt? Här bidrar du till att skapa trygghet för människor och samhällen. Det du gör spelar roll.

Din roll

Som miljötålighetsingenjör i sektionen Environmental Engineering kommer du ingå i ett team som arbetar med beräkningar, analyser, kravställning och verifiering avseende våra radarprodukters tålighet mot vibration, stötlast, klimat och fukt med mera. Jobbet berör alla Surveillance radarprodukter, både till sjöss och på land såväl som de luftburna radarsystemen.

Du kommer även arbeta med att ta fram metoder som förutser behov av underhåll hos våra radarsystem (predictive maintenance), samt att formulera interna miljökrav uttolkade från fältprov av exempelvis stöt, vibration och temperatur.

Du kommer att arbeta med allt från kravspecificering, kravnedbrytning till definition av prov, utförande av strukturanalys och verifiering av färdig produkt. Du kommer även ägna dig åt teknikutveckling och företagets utveckling inom området predictive maintenance.

Din expertis kommer till nytta i flera projekt och produkter, då du i huvudsak jobbar i en stödjande roll i relation till utvecklingsprojekten.

Välkommen till din nya arbetsplats, där du arbetar både självständigt och tillsammans med övriga i teamet för att stödja flera utvecklingsprojekt som bedrivs parallellt. Inom Saab samt tillsammans med externa institut bedrivs också olika forsknings- och teknikutvecklingsprojekt som du kommer involveras i och på sikt även driva. Du kommer samarbeta med experter på områden som materialteknik, antennteknik, elektronik, produktionsteknik med mera.

Din profil

Vi söker dig som är civilingenjör eller teknisk doktor med utbildningsbakgrund inom farkostteknik, maskinteknik, väg & vatten eller teknisk fysik, gärna med inriktning mot strukturanalys. Vi tror att personen för denna roll har flera års arbetserfarenhet inom miljötålighet och/eller som beräkningsingenjör och nu är redo för nya utmaningar.

Som person ser vi att du har ett analytiskt förhållningssätt och att du är drivande i ditt arbete. Du tar eget initiativ och ansvar och kan arbeta både självständigt och i grupp. Du uttrycker dig väl i tal och skrift, på såväl svenska som engelska och är positivt inställd till att resa i och utanför Sverige några gånger per år.

Vi ser gärna att du är väl bekant med hjälpmedel såsom Hypermesh, MSC Nastran, ADAMS, LS-Dyna, nCode alternativt att du har kunskap i likvärdiga verktyg. Erfarenhet av provning är mycket meriterande. Rollen kräver en förståelse för olika belastningstypers dynamiska och statiska påverkan på en struktur och dess livslängd samt förmågan att tolka och bryta ner krav från standarder.

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Vad du blir en del av

Bakom våra innovationer finns alla de som har gjort det möjligt. Modiga pionjärer och kluriga tänkare. Vardagshjältar och kreativa problemlösare. De som delar djup kunskap och de som utforskar nya områden. Och alla däremellan.

Här har du chansen att påverka och bidra på ditt unika sätt. Allt från att utveckla kod och bygga imponerande försvars- och säkerhetslösningar till att ta en kaffe med en kollega. Varje bidrag räknas. Vi ger dig möjlighet att anta utmaningar och skapa smarta innovationer. I vår vänliga och tekniksmarta värld finns plats för dig att växa. Vi finns här för att tillsammans skapa trygghet för människor och samhällen.

Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 22 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare och mer hållbar värld.

Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga. Läs mer om oss här Visa mindre

Testingenjör

Vi söker nu en Testingenjör på uppdrag av vår kund. Huvudsakliga arbetsuppgifter: Utföra tvärfunktionell validering - i rigg och i fordon - av komplett infotainmentsystem och dess HMI. Fokus ligger på icke-funktionell testning och/eller problem som är svåra att hitta i mindre komplexa miljöer (än domännivå). Utföra release-testning av nya mjukvaruleveranser i fordon på veckobasis. Tillhandahålla veckosammanfattningar. Skriva testanalyser och testspecifik... Visa mer
Vi söker nu en Testingenjör på uppdrag av vår kund.

Huvudsakliga arbetsuppgifter:

Utföra tvärfunktionell validering - i rigg och i fordon - av komplett infotainmentsystem och dess HMI. Fokus ligger på icke-funktionell testning och/eller problem som är svåra att hitta i mindre komplexa miljöer (än domännivå).
Utföra release-testning av nya mjukvaruleveranser i fordon på veckobasis.
Tillhandahålla veckosammanfattningar.
Skriva testanalyser och testspecifikationer.
Ladda ner korrekt mjukvarubaslinje till bilen.
Felsökning.
Delta i expeditioner i Sverige och Europa.


Krav på kvalifikationer:

Du har minst en kandidatexamen i datavetenskap, elektroteknik, mekatronik eller motsvarande erfarenhet.
Du har dokumenterad erfarenhet av fordonsindustrin.
Du behärskar engelska flytande (i både tal och skrift).
Du har ett giltigt europeiskt körkort B.
Du har ett genuint intresse för bilar och teknik i allmänhet.
Du ser hinder som uppstår i fältet som utmaningar.


Personliga egenskaper:

Analytisk.
Nyfiken.
Kommunikativ.
Samarbetsvillig.
Kvalitetsfokuserad.
Uthållig.
Verkligt intresse för bilar.


Din ansökan

Låter rollen intressant och passande? Ansök i så fall omgående för vi intervjuar löpande och rollen kan tillsättas innan sista ansökningsdatum.

Vi kan enbart ta emot och bearbeta din ansökan genom att du registrerar ditt CV i vår portal. Med avseende på GDPR kan vi ej ta emot ansökningar via e-post. Varmt välkommen med din ansökan! Uppdraget är en del av Quest Consulting personaluthyrning.

Om oss

Quest Consulting är ett auktoriserat konsultbolag med kollektivavtal, försäkringar, friskvård och tjänstepension. Vi är specialiserade inom IT, Teknik, HR, Administration och Ekonomi. Vår målsättning är att vara din personliga samarbetspartner och just därför är det så viktigt för oss att arbeta efter våra kärnvärden där våra ledord är att vara Personliga, Nyskapande och Professionella. Visa mindre

Rörkonstruktör till Sweco i Luleå!

Har du utbildningsbakgrund från maskin eller mekanik samt erfarenheter från rörkonstruktion? Har du även ett genuint tekniskt intresse och vill arbete i Sveriges största industrisatsning? Då är det dig vi söker! Dina arbetsuppgifter Som Rörkonstruktör hos Sweco kommer du att ansvara för konstruktion och projektering av olika rörsystem, inklusive pumpar, ventiler och annan maskinutrustning. Du kommer att arbeta nära kommunala anläggningar men även mot stö... Visa mer
Har du utbildningsbakgrund från maskin eller mekanik samt erfarenheter från rörkonstruktion? Har du även ett genuint tekniskt intresse och vill arbete i Sveriges största industrisatsning? Då är det dig vi söker!

Dina arbetsuppgifter
Som Rörkonstruktör hos Sweco kommer du att ansvara för konstruktion och projektering av olika rörsystem, inklusive pumpar, ventiler och annan maskinutrustning. Du kommer att arbeta nära kommunala anläggningar men även mot större privata processindustrier.

Ditt arbete som Rörkonstruktör innefattar att lösa specifika problem genom att skapa nya lösningar baserade på processdesignerns analyser. Du kommer att delta i teamarbete för ombyggnationer, förbättringsarbete och entreprenader i olika projekt, främst inom reningsverk, vattenverk, pumpstationer och industriella vattenanläggningar. Här är din huvudsakliga uppgift projektering och konstruktion i Plant 3D, där du skapar ritningar och planer för maskinutrustning och anläggningar.

Här erbjuds du chansen att delta i ett spännande och tekniskt krävande projekt i Sveriges största industriella satsning. Att arbeta med Sweco, ledande inom vatten i Sverige, och andra ledande experter inom olika områden, kan du bidra till att göra detta till verklighet!

Din profil
För att trivas i rollen som rörkonstruktör hos vår kund bör du förutom att tycka om konstruktion, även vara kommunikativ, målinriktad samt ha en strävan efter att utvecklas inom ditt yrke. Vi söker dig som har 2 års erfarenhet inom området sam minst en YH-utbildning inom konstruktion.

Skallkrav:

•Eftergymnasial utbildning inom maskin eller mekanik
•2 års erfarenhet som konstruktör av rör i Plant3D
•Svenska och engelska i tal och skrift

Om Sweco
Sweco arbetar med att planera och utformar framtidens samhällen och städer. Resultatet av deras arbete blir hållbara byggnader, effektiv infrastruktur och tillgång till el och rent vatten. Med 15 000 medarbetare i Europa erbjuder de sina kunder rätt kompentens för varje sammanhang. De genomför uppdrag i 70 länder varje år och är Europas ledande konsultföretag inom teknik och arkitektur.

Mer information om Sweco fås vid intervjutillfälle!

Om Framtiden
Vi på Framtiden arbetar med både bemanning och rekrytering, vi vill göra skillnad i människors liv. Skillnad gör vi genom att hjälpa människor att hitta rätt jobb och rätt kollega. Vi är specialister på att rekrytera rätt talanger till rätt företag. Framtiden finns på sju orter i Sverige samt i Oslo.

För denna tjänst kommer du under en inledande period vara anställd genom oss på Framtiden för att sedan ha möjlighet att gå över och bli anställd direkt hos Sweco.

Rekryteringsprocessen
För det här jobbet består rekryteringsprocessen för dig som kandidat av följande steg: telefonintervju, intervju med rekryterare, referenstagning, en intervju med avdelningschef på Sweco.

För att söka tjänsten skickar du in CV via länken. Vid frågor är du välkommen att kontakta rekryterare Joakim Borglin via e-post [email protected].

Vi arbetar med löpande urval och kan komma att tillsätta uppdraget så fort vi hittat rätt person. Skicka därför in din ansökan så snart som möjligt. Vi ser fram emot din ansökan!

Villkor
Startdatum: Enligt överenskommelse
Placeringsort: Boden eller Luleå men viss möjlighet att sitta i Jokkmokk, Piteå och Skellefteå
Arbetstider: Kontorstider
Omfattning: Heltid, 100 % Visa mindre

Diagnostic Engineer

Ansök    Maj 8    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Diagnostics Engineer where you will be working with creating, developing and maintaining the diagnostic content in the diagnostic tool. Randstad Digital is specialized in competences within IT. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get ... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Diagnostics Engineer where you will be working with creating, developing and maintaining the diagnostic content in the diagnostic tool. Randstad Digital is specialized in competences within IT. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities. Please apply at www.randstad.se, no later than 2024-06-06. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity
Read more about us at Randstad Digital: www.randstaddigital.com

Responsibilities
The off-board Diagnostic Engineer will be responsible for all diagnostic information in the diagnostic tool which is used for fault-tracing by mechanics and technicians in workshops. Tasks includes writing text as well as using and interpreting diagnostic commands and also includes some basic coding in Javascript.

Qualifications
Degree in Mechatronics, Electrical Engineering, Computer Science or similar experience
Experience of diagnosis of electrical vehicles
Vehicle technical knowledge
A team-player who is not afraid of taking lead.
Fluent in English, both spoken and written
Basic knowledge within ISO-14229
A general understanding of how a vehicle works and is fault-traced

To thrive in this role we think you’ll need a good understanding of how vehicles work and a passion for learning more. Information collection is a big part of the work. This requires an investigative mindset.



About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.
With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

CAD Designer

No obstacle is to big, no detail is to small. An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard. The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way. The team is our main focus and most important company asset. We in... Visa mer
No obstacle is to big, no detail is to small.

An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.

The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

The team is our main focus and most important company asset. We invest a lot of resources to provide them with the best possible opportunities to progress in direction they wish. We have assignments all across Sweden, the rest of Europe, Asia and South America.
Knowledge within follow programs;
Catia V5, Creo, Autocad
PLM Systems: Teamcenter, Delmia, Windchill
5S, FMEA, Green Belt, APQP, PPAP
a-way is searching for a resource with experience from CAD design within the automotive industry. Will work towards world-leading companies in manufacturing industry. Visa mindre

Senior Key Account Manager | OEM | HydraSpecma

Har du ett stort säljdriv och kundfokus med kompetens och erfarenhet av mobila OEM kunder? Brinner du för att motivera och leda människor?Finns det dessutom ett stort teknikintresse hos dig är du kanske den vi söker!Din rollI rollen som Key Account Manager kommer du att ingå i ett sälj- och applikationsteam som arbetar med försäljning av hydraulik, ledningskomponenter, elektrifiering, centralsmörjning och systemlösningar. Ditt ansvar som Senior Key Account... Visa mer
Har du ett stort säljdriv och kundfokus med kompetens och erfarenhet av mobila OEM kunder? Brinner du för att motivera och leda människor?Finns det dessutom ett stort teknikintresse hos dig är du kanske den vi söker!Din rollI rollen som Key Account Manager kommer du att ingå i ett sälj- och applikationsteam som arbetar med försäljning av hydraulik, ledningskomponenter, elektrifiering, centralsmörjning och systemlösningar. Ditt ansvar som Senior Key Account Manager / KAM är att driva och utveckla försäljningen mot mobila OEM kunder. Som Senior KAM har du ett nära samarbete med våra kunder för att utveckla nya produkter och hitta affärsmöjligheter. Du kommer att agera som en rådgivare och skapa ett partnerskap med kunden, varför det är viktigt att lära sig förstå kundens verksamhet med syftet att kunna skapa ett mervärde för båda parter. I rollen ingår affärsutveckling och ledarskap.

* Aktivt bearbeta marknaden genom kontakt med befintliga och potentiella nya kunder på egen hand och vid behov i samarbete med applikationstekniker.* Etablera och genomföra försäljningsplaner och budget samt informera organisationen om nuvarande och framtida kundbehov.* Ansvar för att kundkrav och nya kontrakt etableras i organisationen för att säkerställa leverans.* Skapa nätverk med tekniker, konstruktörer och inköpare hos mobila maskinbyggare (OEM).Du rapporterar till Sales Director Mobile OEM och du är placerad på vår sajt i Bårhult strax utanför Göteborg.

Vem är duVi söker dig som har flera års erfarenhet av en liknande roll inom OEM-segmentet. Det är meriterande om du har tidigare erfarenhet av produktsortimentet som ingår i rollen. Du har ett stort tekniskt intresse och har förmågan att sätta dig in i och förstå kundernas verksamheter. Vi söker dig med stort säljdriv och kundfokus. Arbeta i team är för dig en självklarhet och genom att vara kommunikativ, strukturerad, drivande och prestigelös skapar du goda förutsättningar att driva affärerna på en professionell nivå. Du har en god förmåga att se affärsmöjligheter, är förtroendeingivande och skapar långa och hållbara relationer.Vi ser även gärna att du har starka ledaregenskaper och med erfarenhet att leda en grupp.

Om HydraSpecmaHydraSpecma är branschledande inom applikationsanpassade system och komponenter för hydraulik på den nordiska marknaden. Verksamheten är övergripande uppdelad i 3 divisioner, Renewables, Global OEM och Industry & Aftermarket. De är marknadsledande inom sitt produktområde på den nordiska marknaden men har också en ökande export till världsmarknaden. HydraSpecma ingår i börsnoterade Schouw & co och är totalt mer än 1500 medarbetare. Läs mer på http://www.hydraspecma.com

AnsökanLåter detta som din nästa utmaning? Då är du varmt välkommen med din ansökan via annonsen på recruitpartner.se snarast då vi gör ett löpande urval dock senast 20 maj 2024. Vid frågor kontakta ansvarig rekryterare Martina Nordberg på [email protected] eller via telefon 073-624 77 24 Visa mindre

Vehicle Dynamics Software Quality Engineer

Ansök    Maj 7    Randstad AB    Civilingenjör, maskin
Job description We are looking for a new colleague to join our team in a new automotive assignment as a Vehicle Dynamics Software Quality Engineer. As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal devel... Visa mer
Job description
We are looking for a new colleague to join our team in a new automotive assignment as a Vehicle Dynamics Software Quality Engineer. As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, and you are offered a large network and many social activities. Please apply at www.randstad.se, no later than 2024-05-30. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
In close collaboration with Vehicle Dynamics engineering teams you will have a central role in selecting, prioritizing and facilitating product quality assurance activities integrated in our product development. The assignment will give you unique opportunities to be a part in all different phases of our product development from early exploration phases to start of production. The Vehicle Dynamics organization need guidance in what quality tools to apply when and also a strong quality tool facilitator to support us during the different development stages. In addition, there is an ambition for us to climb the ladder of ASPICE, and here you will be the driving force and guide the organization on this journey.
Responsibilities:
• Secure that Quality Task Plan are set, agreed, executed and followed during development.
• Support our design engineers in quality tools and methods to reach the expected product quality level.
• Educate the organization in quality methods and tools.
• Be an ambassador for product quality mindset in the organization.
• Support lessons learn activities securing continues improvement.

Qualifications
You are an engineer and team player with background in software development within the automotive industry. With your personality and pragmatic approach, you are able to connect with people and inspire actions related to improving software quality as well as the related processes. To succeed in your role we think you have:
• MSc Degree in Electrical Engineering, or equivalent
• Experience from:
o Product development in the automotive industry within the areas of Electrical and Electronics, function development and software development
o Proactive Product Quality Assurance methods and tools for both SW and HW
o Product Safety and ISO 26262
o SS7740
• Certificate as Automotive SPICE assessor
• Fluent in verbal and written English
• Goal oriented, organized and structured
• Very good social, networking and communication skills

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Validation Engineer

Ansök    Maj 6    Randstad AB    Civilingenjör, maskin
Job description We are looking for a new colleague to join our team in a new automotive assignment as a Verification Engineer. As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, ... Visa mer
Job description
We are looking for a new colleague to join our team in a new automotive assignment as a Verification Engineer.
As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-05-30. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
As a V&V Engineer, you will play important role of shaping and developing the long-term verification strategy of our control system. You will be responsible for developing test cases- and scenarios on both ECU level (V3, SIL and HIL) and V5 system level for the steering control system. You will perform tests in vehicles as well as tests in virtual environment. Since the team also includes function owners and SW developers you will be closely involved in the SW development even though you will probably not write SW application code.
Your key responsibilities:
• Develop and continuously improve our verification strategy and way of working
• Test case creation
• Carrying out tests in both virtual and real environments

Qualifications
• You have a degree in Mechatronics, Control engineering, Electronics or similar.
• Good understanding of system development of embedded real-time systems.
• Experience in functional development and V&V according to ISO26262.
• Experience in developing/creating simulation models and test cases for function development and verification.
• Fluent in written and spoken English.
Who are you?
• You enjoy teamwork but at the same time, you can work independently and drive development on your own.
• You enjoy working with complex environment and solving technical challenges.
• You are structured and have good understanding on the importance of the process and documentation aspects of technical development.







About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential. With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

System Verification Engineer

Ansök    Maj 6    Randstad AB    Civilingenjör, maskin
Job description We are looking for a new colleague to join our team in a new automotive assignment as a System Verification Engineer SIL. As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is ... Visa mer
Job description
We are looking for a new colleague to join our team in a new automotive assignment as a System Verification Engineer SIL.
As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-05-30. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
In this position you will be developing our different SIL simulation environments as well as writing test specifications, creating test cases, performing testing and analyzing test results. The work will be performed in close cooperation with our function developers. Our toolchain mainly consists of dSPACE tools (ControlDesk, AutomationDesk, MotionDesk/Aurelion, ASM) as well as Jenkins, python and Matlab/Simulink. The work is performed in a multi-cultural environment with both internal and external contacts such as the different development sites around the world and suppliers. We are looking for a highly motivated engineer to strengthen our team in the verification area.



Qualifications
Qualifications: 
•    Master’s degree in engineering (Electronics, Mechatronics, Mechanics or Physics) 
•    Experience from development of embedded control systems within the automotive industry 
•    Experienced in model-based development & verification process 
•    Knowledge of SW integration & basic knowledge of HIL simulator hardware 
•    dSPACE tool chain knowledge 
•    Continuous integration / Continuous deployment 
•    Experienced Python programmer 
•    Experience of working with source control system, (e.g. GIT) 
•    Knowledge of automation tool, e.g. Jenkins Merits: 
•    Experience of setting up CI/CD flow in Jenkins 
•    Matlab/Simulink/Stateflow knowledge 
•    dSPACE ASM experience 
•    Vehicle dynamics knowledge 
•    Experience from working with simulations of mechatronic/pneumatic systems
You are a methodical, curious and dedicated engineer with passion for problem solving. You are open-minded and enjoy teamwork but at the same time you can work independently and drive development on your own. You are good at networking with other people, like challenges and understand the value of a laugh.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.
With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Senior Certification Engineer

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. About Vehicle Certification We are now, to our team in Sweden, recruiting several certification engineers, seniors as well as juniors to our Complete Vehicle certification department. The position offers a stimulating and dynamic work environment, with a high amount of interaction ... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

About Vehicle Certification

We are now, to our team in Sweden, recruiting several certification engineers, seniors as well as juniors to our Complete Vehicle certification department. The position offers a stimulating and dynamic work environment, with a high amount of interaction with colleagues throughout the Volvo Group, external partners, and authorities on a global level.
Vehicle Certification is part of Complete Vehicle (CV) Organization within Group Trucks Technology (GTT). At Complete Vehicle, we manage areas from product design & feature development, verification and validation, certification, aftermarket, customer quality services. The Vehicle Certification team covers EU/UNECE regulations and over 50 requirement areas and acts as a bridge between design engineer, manufacturing, and sales.
The certification process spans across Volvo Group and gives great opportunities to meet and interact with colleagues world-wide. Our team plays an important role in securing that our products meet intended performance and feature readiness – contributing to the success and productivity for our customers!  

Job Description

The Certification team in GOT is responsible to deliver and maintain Type Approval certificates for our FH, FM, FMX products, as well as the common platform systems developed in Gothenburg. As a member of Certification team, you will get responsibility of several certification areas. You will be involved in many projects as certification scope covers the complete vehicle including;

* Manage contacts and negotiations with authorities and technical services
* Develop, plan and manage the certification activity plan to ensure that type approval (vehicle, systems and components) is completed according to plan   
* Validate the consistency between the Certification/Information document and the legal data in Volvo system
* Interpret regulations and legal requirements to support the breakdown to technical requirements
* Prepare and submit the certification information document to authorities.
* Participate in tests


Who are you?

We believe you are a professional with genuine interest in compliance & technology. We believe that you are well-organized and know the importance of delivery precision. As a person, you are curious, positive and possess a strong problem-solving mindset. Being a team-player is important to us, and we also expect excellent communication skills. We are certain you also feel comfortable in hosting meetings with both internal colleagues as well as with external authorities. In the dialogues with external parties, we expect you to be able to build lasting relationships where you can build relevant arguments, as well as negotiate when needed.

What we can offer

We offer a position within an innovative and inspiring environment, in a diverse team with highly skilled engineers. In this position you will get the opportunity to develop both your personal and professional skills. Our domain is dynamic and with the intensified sustainability-, and safety requirements from governments, authorities, and ourselves – you will get a chance to be in the forefront of product development.
We are prioritizing a high level of diversity in our workforce, and we see this as a advantage. We believe that it is the people in the team and our ability to cooperate that makes all the difference.

Are our interests matching?

We believe you have the following knowledge/experience:

* A Master’s degree in engineering or equivalent
* Truck-, and/or vehicle product knowledge
* Previous experience from working with compliance, certification, legal or regulatory domains.
* Ability to bring structure in complex tasks
* Excellent communication & negotiation skills
* Software development or IT-security experience is a merit


Ready for the next move?
Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. If you have any questions please contact Sertac Yavuz, Group Manager Certification GOT at [email protected] application date is 17th of May. We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions.Join our design shift that leaves society in good shape for the next generation. Visa mindre

Group Manager Project Build Vehicle - Stream Products

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transp... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
You feel you made a difference every day you go home from work. You add hands-on value by leading the team and you play an active part in safeguarding that millions of truck deliveries safely reach their destinations. 


Your future team:

The Project Builds Vehicle – Stream products team is a part of the Product Builds organization within Complete Vehicle Sweden, Group Trucks Technology.
Project Builds Vehicle – Stream products have the cross functional lead to secure physical prototype builds (single components, complex rig test objects and complete prototype vehicles) supporting the technology and the vehicle projects in the early development phases.
The team works in close cooperation with the other project builds teams, product development, truck manufacturing, workshops and the prototype purchasing and procurement team.
You will be part of a team that is continuously striving to develop the Product Build organization and way of working to be leaner and more efficient in supporting product development.

This is how you could make an impact:

As a Group Manager, you will lead and support the daily operations in the team to assist product development and deliver prototype builds in agreed time for verification and validation. You will together with the team continue to develop way of working and system support need to increase effectiveness and efficient in our deliveries.
Maintaining the good team spirit, cooperative atmosphere, and proudness to deliver that exists in the team is also how you can contribute.

Who are you?

We believe you are an inspiring and positive person with several years of leadership experience as a manager or X-functional leader within the automotive product development or manufacturing industry. With your background you lead by example and promote cross functional collaboration.
You are known for your integrity, trust and managerial courage. You have an open and positive attitude, great people skills and strong ability to empower, develop and motivate individuals and team.
Continuously learning and adapting is something you take pride in and welcome changes if needed to ensure your own or the team’s performance. You see data as a way to manage ambiguity and to secure objective and fact-based decisions and development way of working. You hold a Bachelor of Science or a Master of Science in mechanical or electrical engineering.

Are we a perfect match?

If you want to make a real impact in your career, the transportation business is where you want to be. We look forward to meeting you so apply today!      
Any question, feel free to contact Maria Flink, Director Product Builds HD Europe, 0739-027508.
Last application date is the 14th of May 2024.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Senior Certification Engineer (Cybersecurity)

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Sustainable transports, a futuristic scenario? It is already happening! Our mission is to make transport industry sustainable and safe – Do you want to be with us on the journey forward? Do you find energy in bringing structure and alignment whilst managing complex topics? Are you also a person who are eager to learn, develop and grow your talents? Perhaps you even share our passion for heavy trucks? Then you might be the star we are looking for!
About Vehicle Certification

We are now, to our team in Sweden, recruiting several certification engineers, seniors as well as juniors to our Complete Vehicle certification department. The position offers a stimulating and dynamic work environment, with a high amount of interaction with colleagues throughout the Volvo Group, external partners, and authorities on a global level.
Vehicle Certification is part of Complete Vehicle (CV) Organization within Group Trucks Technology (GTT). At Complete Vehicle, we manage areas from product design & feature development, verification and validation, certification, aftermarket, customer quality services. The Vehicle Certification team covers EU/UNECE regulations and over 50 requirement areas and acts as a bridge between design engineer, manufacturing, and sales.
The certification process spans across Volvo Group and gives great opportunities to meet and interact with colleagues world-wide. Our team plays an important role in securing that our products meet intended performance and feature readiness – contributing to the success and productivity for our customers!  

Job Description

The Certification team in GOT is responsible to deliver and maintain Type Approval certificates for our FH, FM, FMX products, as well as the common platform systems developed in Gothenburg. As a member of Certification team, you will get responsibility of Cybersecurity, cybersecurity management system and Software Update, Software Updates Management System.  You will be involved in many projects as certification scope covers the complete vehicle including;

* Manage contacts and negotiations with authorities and technical services.
* Develop, plan and manage the certification activity plan to ensure that type approval (vehicle, systems and components) is completed according to plan.   
* Validate the consistency between the Certification/Information document and the legal data in Volvo system.
* Interpret regulations and legal requirements to support the breakdown to technical requirements.
* Prepare and submit the certification information document to authorities.
* Participate in tests and audits.


What we can offer

We offer a position within an innovative and inspiring environment, in a diverse team with highly skilled engineers. In this position you will get the opportunity to develop both your personal and professional skills. Our domain is dynamic and with the intensified sustainability-, and safety requirements from governments, authorities, and ourselves – you will get a chance to be in the forefront of product development.
We are prioritizing a high level of diversity in our workforce, and we see this as a advantage. We believe that it is the people in the team and our ability to cooperate that makes all the difference.

Are our interests matching? We believe you have the following knowledge/experience:

* A Master’s degree in engineering or equivalent
* Truck-, and/or vehicle product knowledge
* Previous experience from working with compliance, certification, legal or regulatory domains.
* Ability to bring structure in complex tasks
* Excellent communication & negotiation skills
* Software development or IT-security experience is a merit


Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Apply today! If you have any questions please contact Sertac Yavuz, Group Manager Certification GOT at [email protected]. Last application date is 17th of May.


We value your data privacy and therefore do not accept applications via mail. 
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Visa mindre

Konsulter till Combitechs utvecklingscenter Göteborg

Ansök    Apr 26    Combitech AB    Civilingenjör, maskin
Har du ett stort intresse av teknik och drivs av att göra skillnad för människor, verksamheter och samhälle? Har du några års erfarenhet från roller som mekanikkonstruktör, beräkningsingenjör, komponentingenjör, systemingenjör eller kablagekonstruktör och är nyfiken på försvarsindustrin? Då vill vi få in din ansökan idag! DIN ROLL Combitechs utvecklingscenter vill nu stärka upp teamet med fler innovativa och nyfikna konsulter! Enheten består idag ... Visa mer
Har du ett stort intresse av teknik och drivs av att göra skillnad för människor, verksamheter och samhälle? Har du några års erfarenhet från roller som mekanikkonstruktör, beräkningsingenjör, komponentingenjör, systemingenjör eller kablagekonstruktör och är nyfiken på försvarsindustrin? Då vill vi få in din ansökan idag!





DIN ROLL

Combitechs utvecklingscenter vill nu stärka upp teamet med fler innovativa och nyfikna konsulter! Enheten består idag av 30 medarbetare som huvudsakligen arbetar mot försvarsindustrin inom olika roller, bland annat; mekanikkonstruktörer, beräkningsingenjörer och komponentingenjörer. Utöver dessa roller vill vi nu också stärka teamet med kablagekonstruktörer och systemingenjörer. Som grupp har vi fokus på sammanhållning, utveckling och att ha roligt på jobbet, vi tror på vikten av balans i livet och att gå till jobbet med lätta steg, med ett genuint engagemang för det vi jobbar med. Om du skulle ingå i detta team har du nära kontakt med din konsultenhetschef för att säkerställa att du trivs i ditt uppdrag och vad du behöver för stöd för att kontinuerligt utvecklas samtidigt som du är en del av ett härligt gäng ingenjörer!



En viktig del i Combitechs verksamhet är kompetensutveckling och för oss är det viktigt att våra medarbetare själva hela tiden strävar efter utveckling och att vi sedan ger förutsättningarna för precis det. Med nära samarbete med din chef tar ni fram en årsplan för hur din utveckling skall gå till och vad du behöver från oss för att lyckas med dina mål. Vi erbjuder också kurstillfällen ett par gånger om året då man får möjlighet att nätverka med andra Combitechare och fördjupa sina kunskaper. Sen älskar vi såklart att ha roligt på jobbet, som de flesta och vi ser gärna att du delar det med oss!



Vi är ca 300 konsulter som sitter på vårt kontor på Lindholmspiren.





VEM ÄR DU?

Vi letar efter dig som har en högskoleutbildning (yrkeshögskola/kandidatexamen/civilexamen) med några års erfarenhet av någon av rollerna som ingår i vår grupp ovan och känner dig sugen på att ta nästa steg i ditt arbetsliv. För att trivas på Combitech tror vi att du är en öppen, kommunikativ person som har lätt för att skapa goda relationer med andra i din omgivning och älskar teknik lika mycket som vi gör. För oss är de personliga egenskaperna viktiga och vi är väldigt lyhörda för dina intressen och karriärsmål. Vi tror på vikten av en bra match mellan konsult och uppdrag och säkerställer därför alltid att matchningen känns minst lika bra för dig, som för oss.



Då tjänsten innebär arbete som omfattas av försvarssekretess krävs det att du genomför och godkänns i en säkerhetsprövning med registerkontroll. Urval sker löpande. Vi ser fram emot din ansökan!





KOM & GÖR SKILLNAD

Vi tror att man gör ett bättre jobb om man kan fokusera på rätt saker, därför gör vi det lätt att kombinera jobbet med vardagen. Vi satsar på våra medarbetare, de utgör kärnan, hjärnan och hjärtat i vår verksamhet. Dessutom står vi på en stadig grund av högteknologi, forskning och anställningstrygghet med försvars- och säkerhetskoncernen Saab som ägare.



För oss handlar det om hållbarhet - vi vill bli branschens mest hållbara företag; och för att vara ett hållbart företag i en hållbar framtid behöver vi investera i våra medarbetare. För oss är din återhämtning, dina utvecklingsmöjligheter och din trygghet lika viktigt som företagets framgång - utan våra medarbetare står vi stilla.



Vill du veta mer om hur det är att arbeta hos oss? Kolla in våra karriärsidor! Visa mindre

Mechanical Design Engineer - Automotive

Ansök    Apr 26    AFRY AB    Civilingenjör, maskin
Företagsbeskrivning AFRY erbjuder tjänster inom teknik, design, digitalisering och rådgivning. Vi är hängivna experter inom industri, energi- och infrastruktur, som skapar värde för kommande generationer. AFRY har en global räckvidd med djupa rötter i Norden. Tillsammans accelererar vi omställningen till ett mer hållbart samhälle. Jobbeskrivning Vilka är vi, och är du vår nya stjärna? Det händer mycket i vår bransch och hos våra kunder och vi ser en spänn... Visa mer
Företagsbeskrivning
AFRY erbjuder tjänster inom teknik, design, digitalisering och rådgivning. Vi är hängivna experter inom industri, energi- och infrastruktur, som skapar värde för kommande generationer. AFRY har en global räckvidd med djupa rötter i Norden. Tillsammans accelererar vi omställningen till ett mer hållbart samhälle.
Jobbeskrivning
Vilka är vi, och är du vår nya stjärna?
Det händer mycket i vår bransch och hos våra kunder och vi ser en spännande tid framför oss inom Automotive.
Just nu letar vi efter dig med minst?2 års erfarenhet av konstruktion eller produktutveckling. Som konstruktör/produktutvecklare hos oss har du möjlighet att arbeta med kvalificerande och spännande projekt både internt och externt, där du får möjlighet att bredda din erfarenhet och kunskapsbank.
Vi levererar lösningar till många olika kunder, stora som små. Vårt team arbetar med produktutveckling där merparten av konsulterna fokuserar på att hjälpa våra kunder med att ta fram bra lösningar för framtidens fordon.
Kravspecifikation
Som person gillar du varierande arbetsuppgifter och har förmågan att se det roliga i att ta fram nya lösningar. Du är noggrann, kreativ, nyfiken och du gillar att arbeta i team där du kan utveckla dina färdigheter inom konstruktion/produktutveckling samt utbyta kunskap med dina kollegor.
Som anställd hos oss kommer du att ingå i ett härligt team av konsulter med massa olika erfarenheter och nationaliteter. Vi är övertygade om att en mix av personligheter och bakgrunder gör oss ännu starkare, mer kreativa?och mer?framgångsrika. Vi vill vara din ideala arbetsgivare, oavsett fas i livet, och vi förstår vikten av en balans mellan privatliv och arbete.
Vi uppskattar vårt nätverk och att skapa trivsel tillsammans genom sociala och kompetenshöjande aktiviteter och spontana träffar som gruppluncher och gemensamma frukostar.
Är du den vi letar efter och besitter dessa superkrafter:
minst?2 års konstruktionserfarenhet/produktutveckling
goda kunskaper av Creo och/eller Catia
har en teknisk utbildning på högskolenivå eller Yrkeshögskola, gärna inom mekanik, maskinteknik eller produktutveckling.
goda kunskaper i svenska och engelska, både i tal och skrift
B-körkort

Som person:
är du nyfiken på teknik, framförallt inom fordonsindustrin
gillar att arbeta i team
gillar att dela med dig av din erfarenhet
har du intresse för att utvecklas i olika typer av konstruktions- och produktutvecklingsuppdrag
ser vi gärna att du är social, glad och engagerad
gillar du att ta egna initiativ och trivs att arbeta i en kreativ miljö

Skicka in din ansökan så snart som möjligt då rekryteringsarbetet sker löpande, dock senast 24 maj 2024.
Roll: Automotive Design Engineer | Start: Omgående med hänsyn till uppsägningstid |Placeringsort: Göteborg | Lön: Efter överenskommelse
Vid frågor,?kontakta:
Johanna Svensson
Sektionschef
[email protected]
+46 70 113 04 87
Ytterligare information
Varför ska du jobba med mig? - Rekryterande chef Johanna Svensson
Min erfarenhet är dels från att själv ha arbetat i produktutvecklingsprojekt men även från att ha arbetat som lärare. Denna unika kombination av kompetens gör mig till en lyhörd ledare som är van att agera snabbt för att lösa stora och små kriser. Jag vill att mina anställda ska ha roligt på jobbet och jag känner stolthet i att se dem utvecklas och nå sina mål
AFRY erbjuder dig också
Kollektivavtal med förmånliga pensionsavsättningar, utfyllnad av lön vid föräldraledighet samt en förmånsportal med mängder av företag knutna till oss.?Genom Club?AFRY kan du lära känna fler av alla 19?000 kollegor via AWs, bok/filmklubbar, brädspelskvällar, lunchlöpning, skidresor mm. Läs mer om våra förmåner på vår hemsida: https://afry.com/sv/bli-en-del-av-afry/lar-kanna-oss

Vi undanber oss direktkontakt med bemannings och rekryteringsföretag samt säljare av ytterligare jobbannonser.
#LI-hybrid #catia #mechanical #automotive


På AFRY driver vi förändring i allt vi gör. Vi anser att förändring sker när modiga idéer möts, när vi samarbetar, skapar innovation och omfamnar kreativa lösningar, det är så vi skapar framtiden. Vi söker konstant kvalificerade kandidater som vill ansluta sig till våra inkluderande team runt om i världen. Bli en del av oss och påskynda den gröna omställningen Visa mindre

Senior Key Account Manager | OEM | HydraSpecma

Har du ett stort säljdriv och kundfokus med kompetens och erfarenhet av mobila OEM kunder? Brinner du för att motivera och leda människor?Finns det dessutom ett stort teknikintresse hos dig är du kanske den vi söker!Din rollI rollen som Key Account Manager kommer du att ingå i ett sälj- och applikationsteam som arbetar med försäljning av hydraulik, ledningskomponenter, elektrifiering, centralsmörjning och systemlösningar. Ditt ansvar som Senior Key Account... Visa mer
Har du ett stort säljdriv och kundfokus med kompetens och erfarenhet av mobila OEM kunder? Brinner du för att motivera och leda människor?Finns det dessutom ett stort teknikintresse hos dig är du kanske den vi söker!Din rollI rollen som Key Account Manager kommer du att ingå i ett sälj- och applikationsteam som arbetar med försäljning av hydraulik, ledningskomponenter, elektrifiering, centralsmörjning och systemlösningar. Ditt ansvar som Senior Key Account Manager / KAM är att driva och utveckla försäljningen mot mobila OEM kunder. Som Senior KAM har du ett nära samarbete med våra kunder för att utveckla nya produkter och hitta affärsmöjligheter. Du kommer att agera som en rådgivare och skapa ett partnerskap med kunden, varför det är viktigt att lära sig förstå kundens verksamhet med syftet att kunna skapa ett mervärde för båda parter. I rollen ingår affärsutveckling och ledarskap.

* Aktivt bearbeta marknaden genom kontakt med befintliga och potentiella nya kunder på egen hand och vid behov i samarbete med applikationstekniker.* Etablera och genomföra försäljningsplaner och budget samt informera organisationen om nuvarande och framtida kundbehov.* Ansvar för att kundkrav och nya kontrakt etableras i organisationen för att säkerställa leverans.* Skapa nätverk med tekniker, konstruktörer och inköpare hos mobila maskinbyggare (OEM).Du rapporterar till Sales Director Mobile OEM och du är placerad på vår sajt i Bårhult strax utanför Göteborg.

Vem är duVi söker dig som har flera års erfarenhet av en liknande roll inom OEM-segmentet. Det är meriterande om du har tidigare erfarenhet av produktsortimentet som ingår i rollen. Du har ett stort tekniskt intresse och har förmågan att sätta dig in i och förstå kundernas verksamheter. Vi söker dig med stort säljdriv och kundfokus. Arbeta i team är för dig en självklarhet och genom att vara kommunikativ, strukturerad, drivande och prestigelös skapar du goda förutsättningar att driva affärerna på en professionell nivå. Du har en god förmåga att se affärsmöjligheter, är förtroendeingivande och skapar långa och hållbara relationer.Vi ser även gärna att du har starka ledaregenskaper och med erfarenhet att leda en grupp.

Om HydraSpecmaHydraSpecma är branschledande inom applikationsanpassade system och komponenter för hydraulik på den nordiska marknaden. Verksamheten är övergripande uppdelad i 3 divisioner, Renewables, Global OEM och Industry & Aftermarket. De är marknadsledande inom sitt produktområde på den nordiska marknaden men har också en ökande export till världsmarknaden. HydraSpecma ingår i börsnoterade Schouw & co och är totalt mer än 1500 medarbetare. Läs mer på http://www.hydraspecma.com

AnsökanLåter detta som din nästa utmaning? Då är du varmt välkommen med din ansökan via annonsen på recruitpartner.se snarast då vi gör ett löpande urval dock senast 20 maj 2024. Vid frågor kontakta ansvarig rekryterare Martina Nordberg på [email protected] eller via telefon 073-624 77 24 Visa mindre

Junior Mekatronikingenjör till Saab i Göteborg

Ansök    Apr 17    Friday Väst AB    Civilingenjör, maskin
Är du en kommunikativ person med intresse för att arbeta med komplexa produkter och mekaniskt utmanande problem? Vill du dessutom arbeta i en miljö präglad av personlig såväl som professionell utveckling och arbeta kundnära med att säkerställa produkternas funktionalitet och kvalitet? Då kan rollen som denna tjänst vara något för dig, sök redan idag! OM KUNDFÖRETAGET: SAAB är ett globalt försvars- och säkerhetsföretag verksamt inom flyg-, land- och marin... Visa mer
Är du en kommunikativ person med intresse för att arbeta med komplexa produkter och mekaniskt utmanande problem? Vill du dessutom arbeta i en miljö präglad av personlig såväl som professionell utveckling och arbeta kundnära med att säkerställa produkternas funktionalitet och kvalitet? Då kan rollen som denna tjänst vara något för dig, sök redan idag!

OM KUNDFÖRETAGET:

SAAB är ett globalt försvars- och säkerhetsföretag verksamt inom flyg-, land- och marinförsvar, civil säkerhet och kommersiell flygteknik. De är runt 19 000 medarbetare och har verksamhet på alla kontinenter. Tekniskt är de ledande inom många områden och en femtedel av deras intäkter går till forskning och utveckling. SAAB ser mångfald som en tillgång och där du som medarbetare får stort ansvar och goda utvecklingsmöjligheter, där de respekterar varje människas behov av ett liv utanför arbetet.

OM TJÄNSTEN:

Som Mekatronikingenjör kommer du att bli en del av ett team bestående av juniora såväl som seniora ingenjörer och arbeta med mekanskt utmanande problem. Arbetet kommer att fokusera på områden inom strukturmekanik, styrning samt miljötålighet kopplat till Saabs produkter. Detta för att dessa ska leva upp till de krav och förväntningar utifrån kravspecifikationer. Arbetet innefattar praktiskt arbete där du arbetar när produkten och på sikt kan rollen även innebära kontakt med kunder.

VI SÖKER DIG SOM:
Har en civilingenjörsexamen i maskinteknik, mekatronik eller motsvarande område.
Besitter goda kunskaper inom strukturmekanik och styrning.
Tycker att mekaniska utmaningar är spännande och har ett intresse av att arbeta hands on och i systemen.
Talar och skriver flytande svenska samt engelska, då båda språken används i det dagliga arbetet.
Har B-körkort.


För att trivas i den här rollen tror vi att du som person är strukturerad, duktig på att kommunicera och en lagspelare som gör ditt bästa för att bidra till gruppens prestation. Du kommer även bistå serviceaktiviteter hos vår kund därav ser vi även att du är flexibel och har lätt för relationsskapande. Du är initiativtagande och inte rädd för att ta dig an nya och varierande arbetsuppgifter.

Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningen har vår kund krav på säkerhetsklassplacering vilket kan medföra krav på visst medborgarskap.

OM ANSTÄLLNINGEN:

Detta är ett konsultuppdrag vilket innebär att du kommer till en början att vara anställd av Friday. Ambitionen från Kunden och vår sida är att du efter 6-12 månader blir direktanställd hos kunden. 

ÖVRIG INFO:
Omfattning: Heltid
Start: Omgående alternativt enligt överenskommelse.
Placering: Göteborg
Rekryteringsansvarig: Marta Laszewska
Lön: Marknadsmässig 


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen. 

OM FRIDAY:

Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter. 

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! 

Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik. Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Group Manager Test Drivers

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transp... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

This is us, your new colleagues

We are entering an era with new technology, high environmental demands and game changing possibilities for the transport industry through integrated services. Our team delivers customer input, verification and validation to secure that we constantly reach our customers’ expectations.
You will be a part of the test driver team, a well established team at Hällered proving ground (closed to Göteborg), executing truck and bus tests on proving grounds and on roads. The team consists of high performing drivers and function testers with proven experience from the field.
Together, we have the key task to provide to our stakeholders accurate and actionable verification and validation data. In the team we value constant dialogue, teamwork, product passion and customer focus.
Join us and contribute to this exciting journey we have in front of us!

This is how you could make an impact

As a Group Manager, you will lead the team providing vehicle and customer data to the engineering community in the field of durability and reliability, function, fuel economy or ADAS. You will work in close collaboration with test engineers and mechanics for an efficient execution of the tests.
You will play an important role in the development of our proving grounds towards new technology. You will get the opportunity to learn a lot about our customers as well as our products.

Who are you?

We believe you are inspiring and highly motivated person with several years of leadership experience from line manager positions or many years of X-functional leadership experience, preferably in product development or transport industry. With your background, you have passion for people, to get everyone grow and the team perform to its best.
You have an ability to establish and develop network and relations with relevant departments and stakeholders across the company. You use logic and methods to solve difficult problems with effective, creative and ingenious solutions. You hold a Bachelor of Science or a Master of Science in mechanical or electrical engineering.

Are we the perfect match ?

If you want to make a real impact in your career, the transportation business is where you want to be. Apply today!
Any question, feel free to contact Romain Klein, Director Vehicle Verification and Validation, 076 553 4025.
Last application date is 5th of May 2024.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination.  

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

CFD Engineer

There is great demand for our services - both in 1D and 3D CFD. We are therefore looking for a motivated and technically driven CFD engineer to our office in Gothenburg. Both engineers with experience and newly graduated engineers are welcome to apply. WHAT WE OFFER YOU We carefully select our colleagues based on both technical competence and personal qualities. As a CFD engineer at FS Dynamics, you will be part of a team of Sweden's leading CFD consulta... Visa mer
There is great demand for our services - both in 1D and 3D CFD. We are therefore looking for a motivated and technically driven CFD engineer to our office in Gothenburg. Both engineers with experience and newly graduated engineers are welcome to apply.


WHAT WE OFFER YOU
We carefully select our colleagues based on both technical competence and personal qualities. As a CFD engineer at FS Dynamics, you will be part of a team of Sweden's leading CFD consultants where collaboration and development are of utmost importance. Assignments take place both at our office in Gothenburg and at our customers. We have a diverse customer base and through both assignments and interaction with colleagues you will have the opportunity to both deepen and broaden within a number of different industries, as well as within fluid dynamics and CFD. Overall, this provides a varied and inspiring work environment as a CFD engineer with the opportunity to develop in the role as a consultant.


CRITERIA FOR THE SERVICE
· An MSc or PhD degree in a relevant subject.
· Good practical experience with either ANSYS Fluent/CFX or STAR-CCM+.
· Experience of ANSA, SpaceClaim or GT-Suite is advantageous.
· Fluent in English is essential, knowledge of Swedish is beneficial.


APPLICATION
We welcome all applicants with relevant experience regardless of background, ethnicity and gender. The deadline for applications is 31st of May and evaluation of received applications takes place continuously. If you have any questions regarding the position, please contact Jakob Fredriksson, 0766-266217 or Daniel Grönberg, 0723-775185.


We treat your applications according to our job applicant privacy policy found on our web site: https://fsdynamics.eu Visa mindre

Group Manager Test Drivers

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transp... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

This is us, your new colleagues

We are entering an era with new technology, high environmental demands and game changing possibilities for the transport industry through integrated services. Our team delivers customer input, verification and validation to secure that we constantly reach our customers’ expectations.
You will be a part of the test driver team, a well established team at Hällered proving ground (closed to Göteborg), executing truck and bus tests on proving grounds and on roads. The team consists of high performing drivers and function testers with proven experience from the field.
Together, we have the key task to provide to our stakeholders accurate and actionable verification and validation data. In the team we value constant dialogue, teamwork, product passion and customer focus.
Join us and contribute to this exciting journey we have in front of us!

This is how you could make an impact

As a Group Manager, you will lead the team providing vehicle and customer data to the engineering community in the field of durability and reliability, function, fuel economy or ADAS. You will work in close collaboration with test engineers and mechanics for an efficient execution of the tests.
You will play an important role in the development of our proving grounds towards new technology. You will get the opportunity to learn a lot about our customers as well as our products.

Who are you?

We believe you are inspiring and highly motivated person with several years of leadership experience from line manager positions or many years of X-functional leadership experience, preferably in product development or transport industry. With your background, you have passion for people, to get everyone grow and the team perform to its best.
You have an ability to establish and develop network and relations with relevant departments and stakeholders across the company. You use logic and methods to solve difficult problems with effective, creative and ingenious solutions. You hold a Bachelor of Science or a Master of Science in mechanical or electrical engineering.

Are we the perfect match ?

If you want to make a real impact in your career, the transportation business is where you want to be. Apply today!
Any question, feel free to contact Romain Klein, Director Vehicle Verification and Validation, 076 553 4025.
Last application date is 5th of May 2024.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination.  

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Studio Engineer Interior Icon Specialist

Ansök    Apr 15    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Studio Engineer Interior Icon Specialist. In this role, you will ensure the communication of component functionalities are conveyed in an intuitive manner using the correct icons, following ISO regulations and other standards. This role involves close collaboration with various stakeholders including designers, engineers, digital modelers and project lead... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Studio Engineer Interior Icon Specialist.
In this role, you will ensure the communication of component functionalities are conveyed in an intuitive manner using the correct icons, following ISO
regulations and other standards. This role involves close collaboration with various stakeholders including designers, engineers, digital modelers and project leads to facilitate the timely delivery of necessary assets and support materials. You participate throughout the entire design process, from first concept to detailed design, although you will be most active after the project has reached theme definition phase.
As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-05-02. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
Receiving and Processing Requests:
Gather component function lists and switchmaps at project initiation.
Monitor component evolution, providing support to Interior designers and syncing with HMI icon library responsible.
Receive requests via project meetings, emails, chat, Jira, or self-generated from design reviews.
Ensure existing function icons are documented from approved data sources and maintain version control.

Timely Deliveries:
Deliver assets anywhere from concept stage to final design, depending on availability and project phase.
Distribute deliverables to designers and modellers via project collaboration platforms.

Delivery Format:
Provide assets in PDF format for reference and DXF format for CAD/DSM import.
Fulfill requests for other formats such as SVG/PNG for VR applications.
Include icons and metadata, scaled, with appropriate line-weight and positioning on CAD designs.

Adapting to Workflow Changes:
Adjust workflow as design operations transition between entities.
Continue support through collaboration folders, ensuring smooth handover.
Adapt to changes in transparency and structure, particularly in response to trends.

Collaboration with Design and Engineering Teams:
Respond to requests and tasks from the Interior Component team and occasionally from the HMI & UX team on a weekly basis, focusing more heavily on later project phases.
Address functions transitioning between digital and physical realms, ensuring consistency and visual integrity.
Be the speaking partner to Engineering side in all projects and the one who actively seeks out what parts need icons and what symbol is to be represented in every project.

Legal requirements:
Stay up to date on ISO regulations and other legal demands related to automotive icons.


Qualifications
Requirements
Degree in Graphics design, Interaction design, human computer interaction, or related field. Or equivalent relevant education.
Proficiency in a graphic design or CAD software, particularly Adobe Illustrator.
Proficiency in Figma, the industry-leading design and prototyping tool
Proficiency in project management tools such as Jira and collaboration platforms like Teams and SharePoint.
Knowledge about ISO regulations and other legal demands around automotive icons.
Knowledge about different demands on line thicknesses, curvature etc, for different manufacturing methods (printing, etching, molded, backlit, chromed etc).
Minimum 7 years relevant work experience.
+10 years solid working experience from automotive industry is required.
Experience from collaborating with multidisciplinary teams of designers, researchers, engineers, strategists and product managers throughout the design process.
Fluent in English, spoken and written.
Work will be performed in Studio in Sweden

Personal attributes:
Strong attention to detail with the ability to maintain accurate documentation and version control.
Excellent communication skills to collaborate effectively with cross-functional teams.
Ability to adapt to changing workflows and priorities.
Self-organized with a strong ability to manage own projects and timelines effectively.


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Function Owner

We offer you: - Challenging and stimulating assignments - Possibilities for personal competence development - Family oriented company policy - Flat organization with quick decision making - Other company benefits Skills needed: The candidate should have experience from software development preferably from the automotive industry, including requirement analysis/ management/specification and implementation work. The candidate should be a good communicator an... Visa mer
We offer you:
- Challenging and stimulating assignments
- Possibilities for personal competence development
- Family oriented company policy
- Flat organization with quick decision making
- Other company benefits
Skills needed:
The candidate should have experience from software development preferably from the automotive industry, including requirement analysis/ management/specification and implementation work. The candidate should be a good communicator and have the ability to encourage people as well as show direction and set targets. Candidate is structured, thorough and with an open minded and positive attitude. The candidate needs to be good at cooperating with others and to have a good sense of responsibility and to be able to drive and resolve technical issues. It is required to be fluent in English, both written and spoken and to have degree in MSc electrical engineering, computer science or similar.


Work description: As a Function Owner on site for our customer in the automotive industry you vill be responsible for analysis, specification and review of brake system requirements and brake system function development. You will work within a multinational team of development engineers and other X-functional stakeholders and with close interaction to the suppliers.
Öppen för alla
Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov. Visa mindre

Mechanical Design Engineer within Inverter Design

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
About the role:
As a Hardware Mechanical Design Engineer, you will play a key role in developing electrical hardware and electric motor drive systems. Collaborating in a dynamic environment, you'll work with skilled engineers and engage with internal and external partners. Bring your visionary thinking, enthusiasm, strong knowledge, and effective communication skills to this role, elevating our work to new heights and contributing to the development of next-gen technologies in a team environment.

Your major responsibilities are the following:
•    Providing Volvo Group with support and expertise within the competence area
•    Contributing to development work with suppliers and technology partners
•    Leading process planning with a strategic approach
•    Participating and providing process and technical results in product development projects
•    Evaluating technical solution and preparing technical requirement and documents
•    Collaborating and conducting test plan, time plan and supporting engineers within the team
•    Work cross functional with both internal and external suppliers

To succeed in this role, it is essential to possess the following qualifications:
•    Master's degree (M.Sc.) or higher in Mechanical Engineering, Hardware Electrical Engineering, or Automotive Engineering.
•    A minimum of 2 years of hands-on involvement in automotive product development.
•    Proficiency in electric product development and design, particularly in electric motor drives and inverters.
•    Familiarity with CAE packages for thermal, CFD, or mechanical simulations.
•    Knowledge of Geometric Dimensioning and Tolerancing (GD&T).
•    Practical experience in assembly, commissioning, and decommissioning processes.
•    Proven expertise in developing technical requirements in collaboration with suppliers.
•    Familiarity with automotive standards, requirements management tools, and process tools.
•    Fluency in spoken and written English. 
Also, you should demonstrate the following personal attributes:
•    Decision-making skills, showcasing the ability to balance available facts and exercise judgment within given time frames.
•    Effective team engagement in a collaborative manner, with a commitment to achieving results and performance excellence.
•    A solution-oriented mindset, actively seeking opportunities and embracing innovative approaches.
•    A structured yet creative approach to problem-solving.
•    Strong networking skills across various functions.
•    Perseverance and commitment to follow through on tasks.

The position title can be customized based on the candidate’s personal competences. 
You will be working within Electric Motor Drive team (in Electromobility Department) which is managed by Emad Samadaei, Group Manager Electric Motor Drive. 
We are looking forward your application, no later than April 15th, 2024.

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Standardization Engineer, Surface Treatment

Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transpo... Visa mer
Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Your mission

At Corporate Standards you will contribute to the transformation of our company, the transport industry and society at large. You will: 

•    Develop and maintain Volvo Group standards and design guidelines in your area of expertise e.g. regarding test methods, painting, electrolytic surface treatments etc. Provide training and technical advice to users of standards, e.g. design engineering, purchasing, aftermarket, etc.
•    Establish and lead cross-functional Volvo Group networks in order to develop standards and support the implementation of the standards.
•    Represent Corporate Standards in Volvo Group forums in your area of expertise
•    Represent the Volvo Group in national, and sometimes international, standardization forums and network with universities and external institutes

Qualifications:
We are seeking you with an MSc or PhD degree in Chemistry or a relevant field. 
You are a true team player and an excellent communicator with skills in both English and Swedish. Proficiency in surface treatment production technologies and processes is required. Prior experience in laboratory and/or product development, preferably within the automotive industry, is highly valued. It is an advantage with experience from surface treatment process industry.


Your future team

The Corporate Standards department is a Volvo Group-common resource organized within Group Trucks Technology, with the mission to secure quality and reduce product costs through standardization. Our stakeholders are mainly product development departments within the Volvo Group. We develop standards and provide training in connection with the developed standards in close cooperation with our stakeholders.
The challenge you will meet is to handle complexity – the opportunity is global networking with colleagues from all Volvo Group Business areas to reach results! You will work in close collaboration with colleagues from, e.g., Trucks, Construction Equipment, Penta and Buses. You will be part of an enthusiastic team of experts in a wide range of technical areas.

Ready for the next move?
Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you.
For more information, contact Per-Olov Brandt, Manager Volvo Corporate Standards, 031-3221369 or [email protected]




We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

SW Test Engineer Infotainment

Ansök    Apr 15    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Software Test Engineer Infotainment. As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Software Test Engineer Infotainment.
As a consultant with us at Randstad Digital, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Digital, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-05-06. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
As an Infotainment SW test engineer, you are responsible for the verification of parts of the Infotainment systems as within Enabling Platform Verification Department, Feature Verification Team. The team consists of three main areas of responsibility; verification in domain and subsystem within Infotainment, Motion and ADAS. The teams focus is on sub-system as well in vehicle and function verification and delivers tested and reported SW into Integration activities.
Be a part of executing the verification plans within EPV area.
Execute the verification work in sub areas in the daily test activities in the Infotainment test team
Involvement in the execution of testing for E2E
Reporting test progress to the Test leader onwards to System team validation for the Infotainment verification area and project team. Also identify and escalate verification risks to management.
Contributing to a culture of improvement and encourage colleagues to implement improvements to increase effectiveness and efficiency.


Qualifications
Qualifications and skills required for the role
Minimum B.Sc. Electrical or Computer Engineering or similar
Experience of Automotive & Infotainment embedded systems development
Relevant experience of the infotainment Test & Verification area.
Technical abilities within measurement and requirement systems
Deep knowledge in Requirement based testing, System Weaver tool knowledge an advantage
Deep knowledge in execution of and creation of test cases
Experience of agile test methods is an advantage
ASPICE understanding is an advantage
ISO26262 understanding is an advantage
Drivers licence B

Personal attributes
High communication skill and high collaboration ability
Ability to drive, motivate and convince.
Each individual in our team has a high level of responsibility and mandate and is expected to be able to work autonomously.


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Vehicle Safety Regulation Specialist

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. ." Do you want to take the challenge to contribute to make our vehicles even safer? Do you want to contribute to create a world where road death is reduced to zero? Do you want to support a Global organization influencing the vehicle regulation development on vehicle safety (general ... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. ."

Do you want to take the challenge to contribute to make our vehicles even safer? Do you want to contribute to create a world where road death is reduced to zero? Do you want to support a Global organization influencing the vehicle regulation development on vehicle safety (general safety, active safety, passive safety, …)? 
Lots of safety systems contribute, already today, to decrease fatalities and to mitigate injuries when accidents occur. However, new vehicle regulations continuously strengthen requirements on our products to increase their safety. We are looking for a regulation specialist who feels comfortable interacting externally with rule makers/stakeholders, to monitor and influence vehicle safety regulation development.

Have you worked with the EU General Safety Regulation? Does WP29, GRSG, GRSP… resonate with you? Then you can be the one!
Your future team
The Product Regulation team is an inclusive team with 6 different nationalities, working on 4 different sites, and connecting with a global network.
What you will do
You will work with regulatory agencies in EU (mainly EU Commission) or in UN (WP29 and subgroups in the United Nations) to influence the development of vehicle safety regulations. To do so, you will, internally, lead and maintain networks to prepare and to anchor the Volvo’ positions. You will act as a Volvo representative within Manufacturers Associations. You will work with our competitors to build consensus positions, in respect of the Competition Law Compliance (CLC). And you will secure our Volvo’s position is well reflected in the industry position. You will promote this industry position to the Members States and other key stakeholders.
You will also have a key responsibility to communicate, internally about the future regulatory development and potential associated risks, and to support Volvo compliance activities. 

Who are you?
You have a strong background / experience in the Automotive Regulations area, and in their developments in the EU and in Geneva (UN/WP29). You are familiar with the EU General Safety Regulation (GSR) and the Framework regulation, and you have experience in this area as a regulation specialist. 
As a member of a global Network you are expected to have an open multi-brand and multi-cultural mindset, to be a network builder, a good team-worker, to be business and customer oriented and to demonstrate courage and integrity.
We believe you are creative and have the mindset to constantly learn and progress. We are expecting that your personality and desire will allow to drive and influence the regulation development in a challenging domain. You should also have a “can do” attitude and take pride in your work.
Working in a global environment, you have excellent verbal and written English skills. You have as well negotiation skills and experience of finding compromise (in English). You have good communication skills and an impressive capacity to analyze/summarize texts to focus on key issues.
Other qualifications needed:
•    Bsc/Msc in mechanical or electrical engineering, material or mobility engineering
•    At least 3 years’ experience in regulation development in the Automotive Safety area in EU or UN/WP29, 
•    Experience with Automotive business, 
•    Collaborative and able to cultivate trustful relationships and networks across organizations (internal – external)
•    Well-developed ability to efficiently formulate and present future regulatory challenges to different set of stakeholders. 
•    Fluent English, both written and oral. Master of Science or Bachelor of Science in Engineering 

What’s in for you?
We offer a solid package of compensation and benefits, plus you will enjoy: 
-    The expertise, diversity of background and experience of the Product Regulation team
-    The opportunities to work in a truly global company.
-    A workplace that brings the best out of everyone.
-    Flexible arrangements
-    Location in Goteborg preferably, potentially in Lyon

This role will include occasional travel. 

Our values are Trust, Passion, Change, Performance and Customer Success. If they light your inner fire, you might be the right person to support our team!

If you are curious and have some questions, Please contact me: Marie-Pierre Daurelle, Director Global Product Regulations : [email protected] - +33 6 64 40 34 66

Last application date 6th of April. 



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Visa mindre

Feature Leader Logistics - Test Environment Responsible

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

Our team and section deliver professional verification and validation of connected logistic services from the end customer perspective before delivery to the market. By connected logistic services we mean the fleet management system Volvo Connect and related services, different mobile apps like My Truck & Charging apps, apps that are shown in the truck for example navigation, driver coaching, driver times etc. This is an area with a lot of new ideas so be prepared for the yet unknown! Since we are testing new services that are not yet released to the market in the various production systems we need to do manual adaptations to our test environment to make it possible to run tests that are as close as possible to the final customer solution. If you work within Volvo AB today you might recognize some of the systems we use: Service configurator, SW configurator, BRIM,  SnAC, Support tool, Protom, VDA, SEM-SEMS, TGW etc. If you are working within VGCS or within Digital & IT today, it is not a disadvantage! Otherwise you will learn as you go!
On a typical day you will be in contact with end-2-end testers at VGCS for the fleet management system (Volvo Connect) and service provisioning, as well as the end-2-end testers at BASC & DII for the in vehicle services. You will share information with our test engineers at Hällered proving ground on the best way of updating test vehicles and what to test and how to best share the result once we have tested. You will be our expert when it comes to fault tracing if something is not working as expected. Our FVV PMs are your counterparts for the overall V&V planning, budget and vehicle need discussions. And in our own team you have feature leader colleagues to share and discuss with. 

You will contribute by:
o    Keeping our entire test environment appropriate for early validation of the complete customer service solution.
o    Prepare our systems for new test needs.
o    Propose how to do tests.
o    Lead x-functional team for the test environment.
o    Know how to solve/who to contact to solve issues with test vehicles.
o    Contribute to the function and group’s continuous improvement.

Your future team
You will be part of the Competitor Vehicle Analysis, Customer Voice and Connectivity team at Complete Vehicle Sweden. We are a small team with highly skilled co-workers working cross-functionally within Volvo AB performing technical competitor analysis and validation of logistic services & fleet management systems for the Volvo Truck brand. 


Who are you?

You have a genuine interest for digital services and data system architecture. You are a good communicator and a true team player, as we work cross-functionally and are dependent on good relations with our colleagues in other departments. On top of this, you will bring your passion for some of the following topics: system verification & validation methods, presenting and sharing system knowledge, continuous improvement and/or logistics system business knowledge. You are familiar with functions and services development. You are accountable for your deliveries and act as a role model.
Great if you have a truck driver license, you need at least a car driving license.
It is an advantage if you have been working a couple of years in automotive industry and have a good understanding of software development together with a Bachelor or Master of Science. You use logic and methods to solve difficult problems with effective, creative, and ingenious solutions always with the end customer in mind!


Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Do not hesitate to contact Anders Berfner to discuss if this role could be a good match for you, at [email protected]


We value your data privacy and therefore do not accept applications via mail. 
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Project Manager | Mobility

Together Tech är med och utvecklar innovativa produkter och digitala lösningar. Vi tror på att skapa en inkluderande, dynamisk arbetsplats och uppmuntrar våra medarbetare att kombinera sin starka tekniska kompetens med viljan att utmana för att skapa en mer hållbar framtid. Vårt erfarna Mobility-team i Göteborgser framtida möjligheter att utöka med både seniora och juniora projektledare.Som GDL har du en projektledande roll med fokus på löpande uppdatering... Visa mer
Together Tech är med och utvecklar innovativa produkter och digitala lösningar. Vi tror på att skapa en inkluderande, dynamisk arbetsplats och uppmuntrar våra medarbetare att kombinera sin starka tekniska kompetens med viljan att utmana för att skapa en mer hållbar framtid.
Vårt erfarna Mobility-team i Göteborgser framtida möjligheter att utöka med både seniora och juniora projektledare.Som GDL har du en projektledande roll med fokus på löpande uppdateringar av interiöra och exteriöra detaljer inom fordonsindustrin. Du blir del av ett agilt team med ansvar för att driva och säkerställa tid, kvalité och kostnad inom specifikt område och gentemot projektplan. Du kommer att arbeta brett och i nära samarbete med såväl interna som externa intressenter så som produktägare och underleverantörer.Läs mer om vårt engagemang inom området Mobility.

Din tekniska bakgrund
Master-/Kandidatexamen inom Maskin, Mekanik, Industriell ekonomi ellernärliggande område.
Du har erfarenhet avatt driva och koordinera projekt inom fordonsindustrinsamt att arbeta gentemot flera kontaktytor.
God förmåga att uttrycka dig på svenska ochengelska professionellt, både skriftligt och muntligt.
Extra plus är erfarenhet inom Catia, KDP, Teamcenter samt materialkunskap.

Dina personliga egenskaper
Att vara konsult kräver en flexibel och nyfiken grundinställning, ett självständigt arbetssätt och förmågan att bygga starka relationer med kunder och kollegor. I projektledarrollen är duenlagspelare med högt driv och en "can do"-attityd. Du är motiverad att utvecklas tillsammans med oss.
Together Tech för hållbar produktutveckling
Vi ger möjligheter till utvecklinggenom en variation av uppdrag inom olika branscher och områden, i uppdrag hos kund eller i något av våra in-houseprojekt. Hos oss på Together Tech arbetar du tillsammans med andra ingenjörer som brinner för miljö och hållbarhet, alla med en vilja att skapa bestående lösningar med hjälp av teknik – eller som vi säger: Better World Tech!
Din utveckling & vårt stöd
Din utveckling och ditt välmående är viktigt för oss varpå vi erbjuder förmåner som stöttar dig och din karriär på bästa sätt. Vi värdesätter vikten av trygg anställning och fast lön, och är kollektivanslutna. För att främja din hälsa erbjuder vi friskvårdsbidrag på 4000 kr per år och även hälsoundersökning, bidrag till aktiviteter och friskvårdsrabatter.
Vi gillar att umgås med varandra i olika sociala aktiviteter, som passar alla! Alltifrån afterworks, sportaktiviteter och 5-kamp till företagskonferenser. Vi strävar efter att ge dig förutsättningar att växa genom olika uppdrag och projekt samt individuella utvecklingsplaner. Vi erbjuder även kurser inom hållbarhet och andra områden inom ramen för din roll och dina mål. Vi är stolta över att vara utsedda till en av Sveriges mest attraktiva arbetsgivare 2024!

Vill du veta mer om oss, besök gärna vår hemsida www.togethertech.com
För frågor kring den aktuella tjänsten kontakta BUM Anders Lüborg,0700-889796eller BUM Martin Gerhauser,0709-527369. Visa mindre

Konsortieledare 5G COMPA

Ansök    Apr 5    SAAB AB    Civilingenjör, maskin
Konsortieledare 5G COMPAD PU Communications är ansvariga för att designa, integrera och leverera kommunikationslösningar för SAABs bredare portfölj Din Roll 5G COMPAD (https://5gcompad.eu/) är ett europiskt EDF (European Defense Fund) Projekt som syftar till att kravställa hur Militären skall använda sig av 5G samt vilka krav som behövs uppfyllas. Detta genom att identifiera ett antal Militär användarfall som kravställs och demonstreras// Detta pro... Visa mer
Konsortieledare 5G COMPAD

PU Communications är ansvariga för att designa, integrera och leverera kommunikationslösningar för SAABs bredare portfölj



Din Roll

5G COMPAD (https://5gcompad.eu/) är ett europiskt EDF (European Defense Fund) Projekt som syftar till att kravställa hur Militären skall använda sig av 5G samt vilka krav som behövs uppfyllas. Detta genom att identifiera ett antal Militär användarfall som kravställs och demonstreras//

Detta projekt drivs av ett Konsortiet av 17 olika bolag där SAAB är Konsortieledare. Din roll blir att leda hela konsortiet i olika forum och även representera mot beställare



Din Profil

För att lyckas i denna roll tror vi att du har:

* 5+ års erfarenhet av komplex projektledning
* 5+ års erfarenhet av produktutveckling mot försvar
* 5+ års erfarenhet av 3GPP teknologi (2G, 3G, 4G och/eller 5G)
* har goda kunskaper i engelska och svenska

Vi hoppas att du känner igen dig i dessa personliga egenskaper:

* drivande
* intresserad av att utveckla människor och verksamhet
* tekniskt intresserad
* kommunikativ
* hjälpsam

Meriterande är:

* om du har kännedom om FMV och FM organisation och underhållsinformationssystem
* tidigare erfarenhet av systemingenjörsarbete inom försvarsindustrin



Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Resor förekommer i tjänsten.

B-körkort är ett krav



Vänligen observera att vi arbetar med löpande urval och tjänsten kan komma att tillsättas innan sista ansökningsdatum har gått ut.



Vad du blir en del av
Affärsområdet Surveillance erbjuder världsledande sensorteknik inom övervakning och beslutsstöd för att skydda mot hot. Portföljen omfattar luftburna, markbaserade och marina radarer, elektronisk krigföring, stridsledning, flygsystem och cybersäkerhet.



Saab utvecklar, tillverkar och underhåller avancerade system inom flygteknik, vapen, ledningssystem, sensorer och undervattenssystem. Saab har sitt huvudkontor i Sverige men en global verksamhet där Saab är en del av många nationers försvarsförmåga. Läs mer om oss här



Saab är ett företag där människan står i centrum. Vi har en god arbetsmiljö där vi stöttar och hjälper varandra att göra vårt bästa. Kontinuerligt lärande, välmående, karriär- och talangutveckling är exempel på områden där vi alltid arbetar hårt för att säkerställa att du som medarbetare får de möjligheter som du behöver. Visa mindre

Industrial PhD Simulation: Digital twin for durability

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Ar... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Are you passionate about changes and innovations and want to be part of a paradigm shift in the development of transport and mobility solutions? This is a great opportunity to do that for a PhD on Digital Twin for Durability. This exciting research project will be carried out in close collaboration with the Chalmers University of Technology, Volvo Cars and RISE.
Who are we? What do we work with?
We belong to a department that works to optimize the product platform towards specific customer needs. We are fully integrated in all development phases from research, to advanced engineering, technology and vehicle programs as well as maintenance.   
Our team develops, secures, and verifies complete vehicle performance in the areas of durability, ride comfort, handling and vehicle motion by use of complete vehicle simulations. Furthermore, we provide methods and tools for our areas of expertise. We have close co-operation with the engineering and test departments and perform work for all Volvo Group Trucks Technology development sites.

You will be part of a tight team of twelve passionate analysis experts. We work in an enthusiastic atmosphere where joy, team spirit and trust are key characteristics.

Main role and responsibilities
Virtual models that mirror the physical vehicle state and durability health status throughout its lifecycle is an essential enabler to accelerate the ongoing development of clean and energy-efficient technologies and offer new services in the form of predictive maintenance and support circularity through re-use and increase of vehicle uptime. 
The digital twin framework offers a way to better coordinate this work and close the knowledge gap faster. By systematically synchronizing virtual models with test data one can detect potential problems with rigs or vehicles at an early stage.
The overarching aim of this PhD project is to formulate a digital twin, a model that is initiated and utilized during the product development process and continues to assess the customer vehicle status and predict future maintenance needs throughout the vehicle life. A methodology for model-based health monitoring for the end-user will be developed. In parallel, work will be carried out to implement the digital twin already in the product development phase. Finally, a demonstrator will be created.
Your major responsibility is to pursue research in line with the project, publish and present scientific articles, support the Volvo Group patent strategy, and take part in discussions for knowledge sharing.

Who are you?
You need to have strong collaboration, networking, and complexity management skills. You also need to be open-minded, self-motivated, and meticulous with independent critical thinking in your problem-solving approach. We also believe you are a person who feels enthusiastic about structural dynamics with a interest in vehicle dynamics with the goal to deliver optimal vehicle performance to our customers. You are a person who gets thrilled to explore the unknown and drive new ideas forward under uncertainty. In addition, we believe you have the following:
•    Master’s degree in physics, engineering or equivalent with an orientation towards analysis
•    Experience from structural analysis and related methods and tools as well as signal processing is required 
•    Fluent in both written and spoken English.
•    Main tools used are Nastran, ANSA, Matlab and Python

Do you find it exciting, think this is a perfect match to your future ambitions? Please, send your application including the following mandatory documents:
1.    Full CV including your academic background, professional experiences, main technical competences/skills, and two references with contact information.
2.    Cover Letter (1-2 pages) including your short background, research interests, motivation for this Industrial PhD position, and future professional goals, please include the abstract of your bachelor and/or master thesis with web links to full text in your cover letter. 

If you have any questions regarding this research project and the position, please do not hesitate to contact me.
Sofi Sjögren, Manager Platform Analysis Structure [email protected]


We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. Visa mindre

Product Development Project Manager

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 


This is us, your new colleagues at Powertrain Engineering Driveline
The Powertrain Engineering Sweden organization has the full Product platform responsibility for the Heavy-Duty Engines and Transmissions that equip all the brands of Volvo Group worldwide. 
At Powertrain Engineering, we are passionate about shaping tomorrow’s technology to create excellent sustainable transport and infrastructure solutions to make the world a better place for future generations. We engineer products and solutions for components, systems and complete powertrains, covering advanced engineering of future technologies, product development and maintenance of products in production. 
The Driveline department is responsible to design, test and deliver a diverse range of products, systems and software that make the complete transmission/driveline offer for combustion and electrified vehicles across the different brands of Volvo Group. We develop top quality engineering, and we make our customer operations more efficient by using a range of new tools, including Data Analytics and Artificial Intelligence. 


Roles and Responsibilities
As Project Manager, you will have the opportunity to start-up and lead the development of new transmission solutions for both combustion and electric vehicles. Your will interface engineering teams, colleagues, suppliers, customers and partners from the multiple global locations where Volvo operates. 
You will also be part of the Transmission Product Team, a group of approximately 15 highly skilled and experienced engineering professionals which holds the collective responsibility to lead the development of world-class gearboxes and propulsion systems, working in a stimulating, open and modern environment. 

Your main responsibilities will be: 
•    Manage projects with high technical complexity and significant business impacts, including several function areas in multiple locations across the globe.
•    Your assigned projects will include development of new technologies or implementation of new concepts, affecting both global technical platform and local applications.
•    Cooperate and guide several engineering teams, ensuring hardware and software technical deliveries to ultimately fulfil product requirements and project goals.

Qualifications
We are looking for a person with proven project management skills with ability to drive and motivate project teams. You possess a flexible mindset with ability to lead change and take decisions, and the ability to be clear and concise in communication. Very important is that you have a collaborative mindset and capabilities to interact with many different stakeholders.

Our experience says that to fill those expectations you may match some of the aspects below: 
•    You hold a master’s degree in Engineering.
•    You have a proven experience in project management roles.
•    You have previous experiences in automotive systems development. 
•    You find yourself comfortable and excited about operating in a global environment.
•    You enjoy balancing between strategic plans and short-term activities. 
•    You are comfortable in taking decisions and standing up for the values of our company. 
•    You enjoy finding new solutions and improving yourself and the teams you work with.
We also believe you have a structured way of working and a quality mindset. In this role, it is very important to be able to build good relations and collaborate with colleagues globally and therefore we believe that you would have excellent English communication skills. 


What can we offer?
You get an opportunity to work together with highly skilled colleagues in an exciting, global environment which provides opportunities to develop both professionally and personally. Our daily work is performed in an international environment giving the opportunity to interact with highly committed colleagues from different cultures. We trust the individual and act as a team, stay close to the product and provide opportunities for professional and personal growth.


Curious and want to know more? Please contact me! We look forward to receiving your application!
Roberto Florindo – [email protected] - Group manager Transmission Product Team, Driveline GTT Powertrain Engineering Sweden

Last application date 22nd of april.



We value your data privacy and therefore do not accept applications via mail. Visa mindre

Internship Program Spring 2025 - Electrical/Mechanical - Car Plant

Volvo Cars Are you ready for an exciting internship to gain work experience during your time at the university???  At Volvo Cars we are convinced that the best way to really learn a job is to work alongside some of the most skilled peers within your area of interest. Our Internship Programme offers that opportunity and provides you with a great foundation to boost your career in a transforming industry. Take the opportunity to join?our 5-month-long c... Visa mer
Volvo Cars

Are you ready for an exciting internship to gain work experience during your time at the university??? 
At Volvo Cars we are convinced that the best way to really learn a job is to work alongside some of the most skilled peers within your area of interest. Our Internship Programme offers that opportunity and provides you with a great foundation to boost your career in a transforming industry.

Take the opportunity to join?our 5-month-long career-boosting?Internship Programme?in Gothenburg Sweden, together with other students from around the globe! 

For the right person, an inspiring, visionary workplace awaits, that will give you a great understanding of what it’s like to work at Volvo Cars. You will be valued for your unique contribution, skills and background and ability to see things from a new perspective! 

Offer highlights 

The programme takes place between February 3rd – June 27th, 2025. 

* 29?000 SEK monthly gross salary and a full-time temporary employment 
* Working model: On-site at Headquarter in Gothenburg 
* 3500 SEK health care allowance per year (to use on wellness activities such as our inhouse gym)  
* Visa/work permit support given where necessary 
* Costs for flight tickets covered for international moves 
* Assistance in finding accommodation for candidates moving to Sweden 


Furthermore, the Internship Programme offers common onboarding days, developed business understanding, personal-development opportunities, mentorship, and joint activities with the other students.  

What you’ll do 

In our car plant we are offering engineering students positions where you get to work in our new Aluminum foundry, the Paint shop, or Battery Assembly. 

In the Aluminum foundry students will, amongst other tasks, get to develop and implement technical regulations with product demands that work in the foundry process. The internship involves handling and visualizing large amounts of data in a structured way; therefore, it is key to have experience from quality assurance. 

At our Paint shop, we have a lot of technical equipment, including ovens and robots, which impacts our environment. Students map the current state for the Paint shop and develop tools for increasing the shop's sustainability work. One example could be to take part in shaping the shops' sustainability roadmap. 

Battery Assembly is developing the next generation automotive batteries and students will contribute to the sustainability development of the assembly process.  

For some positions, students will get to analyze and optimize the operational performance of the machines used in the manufacturing of battery packs. The goal is to increase the energy efficiency of the machines, reduce downtime, and improve the overall production capacity. 
More details on the project that you will be working on as well as the team which you will join will be presented at a possible interview with the potential manager/mentor. 

What you’ll bring 

To be eligible to apply you must be enrolled at a university and have an ongoing Bachelor (3rd and 4th year) or Master's education during the Internship Programme. 
For positions in our Car Plant you should have ongoing studies within electrical, mechanical or automotive engineering, or metallurgy. For one of our positions in The Battery assembly, we are specifically looking for environmental engineering students. 

PLC programming skills are meritorious, so is experience from LEAN or Minitab. 
We believe that you are a great networker and communicator. You are curious, have a positive attitude, and are interested in developing yourself, others, as well as our business. 

As we are an international workplace, you must be fluent in English, spoken and written.  

The?programme?is open to applicants from all over the world and we welcome diversity in all aspects. For international applicants you must hold a passport that is valid for at least 6 months after the end of the programme. 

Recruitment process?? 

An email confirmation will be sent as soon as you have applied. After application screening, all eligible candidates will be invited to conduct an online assessment. You can apply to several internship programme positions but will only do the assessments once. The last step in the recruitment process is an interview with the hiring manager via Microsoft Teams. Selected candidates for the programme will be informed throughout June. 

Seems like something for you? 

Boost your career and apply today! You apply by creating a profile on the Volvo Cars career site and submit your application consisting of CV and cover letter in English.??? 

Apply as soon as possible, but no later than Sunday May 5th ,2024?(midnight?CET). For questions, you are welcome to contact us at [email protected] Visa mindre

Supplier Risk Leader

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Join Our Product Modification Team within Vehicle Integration!


Do you enjoy proactive discussions with product owners to ensure smooth operations? We're looking for a Supplier Risk Leader to join our team in Gothenburg. You'll play a crucial role in managing risks and crises, particularly within the GTT & HDV range in Europe.
Our mission is simple: identify and act on early risk signals efficiently, ensuring smooth processes and prompt actions.

Key Responsibilities:


* Collaborate closely with the Crisis leader in the PPSO organization within the GTT & HDV Range Risk & Crisis team.
* Prepare cases and make decisions on how to proceed within GTT, ensuring the right resources are engaged and stakeholders are informed.
* Maintain ongoing communication with product owners to anticipate issues and find the most efficient path forward for the Volvo Group.
* Utilize your experience to guide teams through challenging situations, enabling quick and efficient problem-solving.?????????????????????
* Optimize the Way of Working related to supplier risk and crisis management.


Who are you?


If you're dynamic, flexible, communicative, and decisive, you're exactly who we're looking for!
Strong networking, leadership, and stakeholder management skills are essential for success in this role.

Qualifications:

* A graduate engineer with experience in product development within the automotive industry.
* Previous experience in project management or knowledge of project processes.
* Excellent communication skills and experience interacting with senior management.
* Fluency in spoken and written English.


Ready to take on this exciting challenge? Join us and be part of a team dedicated to delivering excellence in vehicle integration and risk management! Apply now.

If you are interested and have questions, please connect with me.
Carolina Joviken, Manager HDV Product Modification Gothenburg, +46 73 90 54 12

Last application date 30th of april. Interviews for this position will start in may. 



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Internship Programme Spring 2025 - Electrical/Mechanical Engineering

Who are we? Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them. Are you ready for an exciting internship to gain work experience during your ... Visa mer
Who are we?

Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them.

Are you ready for an exciting internship to gain work experience during your time at the university??? 

At Volvo Cars we are convinced that the best way to really learn a job is to work alongside some of the most skilled peers within your area of interest. Our Internship Programme offers that opportunity and provides you with a great foundation to boost your career in a transforming industry. 

Take the opportunity to join?our 5-month-long career-boosting?Internship Programme?in Gothenburg Sweden, together with other students from around the globe! 

For the right person, an inspiring, visionary workplace awaits, that will give you a great understanding of what it’s like to work at Volvo Cars. You will be valued for your unique contribution, skills and background and ability to see things from a new perspective! 

Offer highlights 

The programme takes place between February 3rd – June 27th, 2025. 

29?000 SEK monthly gross salary and a full-time temporary employment 
Working model: On-site at Headquarter in Gothenburg 
3500 SEK health care allowance per year (to use on wellness activities such as our inhouse gym)  
Visa/work permit support given where necessary 

Costs for flight tickets covered for international moves 
Assistance in finding accommodation for candidates moving to Sweden 


Furthermore, the Internship Programme offers common onboarding days, developed business understanding, personal-development opportunities, mentorship, and joint activities with the other students.  

What you’ll do 

This year we are offering positions at various departments within Research & Development (R&D) and Manufacturing Engineering, such as electrical driveline and systems, climate control and charging. 

Tasks at these departments will for example include sustainability work for electrical driveline, design of climatization and energy saving systems, and collecting, testing, and analyzing data in charging test rigs. 

More details on the project that you will be working on as well as the team which you will join will be presented at a possible interview with the potential manager/mentor. 

What you’ll bring 

To be eligible to apply you must be enrolled at a university and have an ongoing Bachelor (3rd or 4th year) or Master's education during the Internship Programme. 
For positions within areas mentioned above, you should have ongoing studies within electrical, mechanical/mechatronics or automotive engineering, thermodynamics or physics.  

We believe that you are a great networker and communicator. You are curious, have a positive attitude, and are interested in developing yourself, others, as well as our business. 

As we are an international workplace, you must be fluent in English, spoken and written.  

The?programme?is open to applicants from all over the world and we welcome diversity in all aspects. For international applicants you must hold a passport that is valid for at least 6 months after the end of the programme. 

Recruitment process?? 

An email confirmation will be sent as soon as you have applied. After application screening, all eligible candidates will be invited to conduct an online assessment. You can apply to several internship programme positions but will only do the assessments once. The last step in the recruitment process is an interview with the hiring manager via Microsoft Teams. Selected candidates for the programme will be informed throughout June. 

Seems like something for you? 

Boost your career and apply today! You apply by creating a profile on the Volvo Cars career site and submit your application consisting of CV and cover letter in English.??? 

Apply as soon as possible, but no later than Sunday May 5th ,2024?(midnight?CET). For questions, you are welcome to contact us at [email protected] Visa mindre

CAD Designer

No obstacle is to big, no detail is to small. An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard. The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way. The team is our main focus and most important company asset. We in... Visa mer
No obstacle is to big, no detail is to small.

An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.

The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

The team is our main focus and most important company asset. We invest a lot of resources to provide them with the best possible opportunities to progress in direction they wish. We have assignments all across Sweden, the rest of Europe, Asia and South America.
Knowledge within follow programs;
Catia V5, Creo, Autocad
PLM Systems: Teamcenter, Delmia, Windchill
5S, FMEA, Green Belt, APQP, PPAP
a-way is searching for a resource with experience from CAD design within the automotive industry. Will work towards world-leading companies in manufacturing industry. Visa mindre

Mechanical Design Engineer - Busbars for HV Distribution parts

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." El... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Electromobility is changing the automotive world, and we are now looking for you who want to be part of this change happening in our industry! The Electromobility organization is responsible for the complete development lifecycle of our electric powertrains – from advanced engineering through product development into the maintenance phase. Together we drive the transition from conventional powertrains to electromobility based on cutting-edge engineering, state-of-the-art research, and well-proven technology within the Volvo Group. By joining us, you’ll be part of a global and diverse team of highly skilled professionals who work with passion, trust each other, and embrace change to stay ahead. We make our customers win.? 
About the role?
Do you want to work with entirely new technology at the forefront of electromobility? As a Mechanical Design Engineer – HV Distribution parts, you will work together with your team – give energy and lend a helping hand with your solid experience when needed. You will be part of a team that is developing/designing the next generation of High Voltage Junction boxes.??  
As Design engineer you will also:? 
* Drive the design of different design areas within the High voltage Junction boxes, in particular on busbars and thermal insulation materials.? 
* Come up with innovative design ideas that makes our hardware more cost effective and efficient.?
* ?You will have close cooperation with colleagues within the electromobility team and with other departments within Volvo Group Trucks Technology and other business areas. 
* Work cross functional with both internal and external teams, i.e production, suppliers etc.? 

We are looking for…? 
… a solution and innovation-oriented team player with the ability to make decisions based on facts and engineering judgment. You are confident – believe in your ability and influence others to do the same. You're the one who always looks for opportunities and welcomes new ways of doing things. You like problem solving and you get motivated by the fast pace that is currently in the Electromobility field.? 
With your innovative design ideas, we want you to send in your application today. Come and take the opportunity to work with the coolest technical challenges in an encouraging environment. Join our exciting change journey today!? 

Requirements:?? 
* You have an BSc degree in Mechanical Engineering, Mechatronics engineering, or Physics 
* At least 5 years of experience in product design in automotive industry??? 
* Technical knowledge in the Electromobility products, systems and components???? 
* Skills in CAD Design (Creo meriting), 2D drawings, and tolerance stack analysis? 
* Fluent in both written and verbal English 
Experience in design of high and low voltage distribution boxes.

For this role, we are searching for a person with specific experience within the areas of busbars and thermal interface materials, meriting experience with sheet metal and/or casting. Visa mindre

Utbildare- & Teknisk Supportspecialist till Husqvarna Construction Division

Är du en entusiastisk person med en passion för att dela kunskap? Har du ett tekniskt intresse eller bakgrund? Då är det här din chans att ansluta dig till Husqvarna Constructions nya team inom Eftermarknad och Service. Vi söker nu en nyckelperson som kan stödja våra kunder genom att erbjuda relevant kunskap och support.  Husqvarna grundades år 1689 och har i över 325 år erbjudit innovativa lösningar och högkvalitativa produkter inom skog, park och trädgår... Visa mer
Är du en entusiastisk person med en passion för att dela kunskap? Har du ett tekniskt intresse eller bakgrund? Då är det här din chans att ansluta dig till Husqvarna Constructions nya team inom Eftermarknad och Service. Vi söker nu en nyckelperson som kan stödja våra kunder genom att erbjuda relevant kunskap och support.
 Husqvarna grundades år 1689 och har i över 325 år erbjudit innovativa lösningar och högkvalitativa produkter inom skog, park och trädgård. Prestanda och användbarhet möter säkerhet och miljöomsorg i deras arbete där batterilösningar och robotteknik leder vägen. Husqvarna är idag en multinationell ledande röst i en bransch i konstant förändring
 
Vad Husqvarna kan erbjuda dig:
Hos oss på Husqvarna finns en stor möjlighet till professionell utveckling. Vi strävar efter att ha en arbetsmiljö som är inkluderande och mångfaldig, där vi tror att våra skillnader är våra styrkor. Därför går vi efter ledorden: Vi vågar, vi engagerar oss, vi bryr oss.
 
Om rollen:
Att bli en del av vårt team ger dig en spännande möjlighet att hålla serviceutbildningar och ge teknisk produktsupport på en marknad som sträcker sig över hela världen. Du blir en värdefull del av vår globala organisation samt en del av ett nytt och ambitiöst team.
Ditt huvudsakliga ansvar är att hålla serviceutbildningar och vara ett förstklassigt teknikstöd till våra marknader, kunder och samarbetspartners. Du kommer att bidra i vårt eftermarknadsteam med att bedöma utbildningsbehov för lokala helägda Husqvarnabolag, servicecenter, återförsäljare och partners.

Här får du arbeta med att: Utveckla och leda tekniska serviceutbildningar för våra produkter.
Ge teknisk support för kundproblem.
Framställa instruktionsvideor för service och reparation.
Samarbeta med lokala och centrala team för att hantera komplexa tekniska ärenden.
Driva utvecklingen av vår produkttekniska support.
Samla och utvärdera feedback från våra utbildnings- och supportaktiviteter.

 
Om dig:
Vi tror att du är en kundorienterad, självgående person med en god teknisk förståelse. Du trivs med att arbeta i en internationell miljö och är bekväm med att vara en presentatör och utbildare. I ditt arbete kommer du att ha frekvent kontakt med både kollegor och kunder över hela världen, vilket är varför det är viktigt att du är en öppen och kommunikativ person som är trygg med att kommunicera på engelska i både tal och skrift. Du har ett strukturerat arbetssätt och en god förmåga att arbeta tvärfunktionellt.

Vi ser även att du har: En teknisk bakgrund och förståelse för mekaniska och elektriska system inklusive mjukvaruprogrammering.
God administrativ kunskap inom MS Office
Gärna god kunskap i ytterligare något av de större europeiska språken
Tidigare erfarenhet inom eftermarknad och produktledning är en fördel.
 
Övrig information:
Tillträde: Omgående eller enligt överenskommelse
Plats: Denna position är primärt baserad i Jonsered utanför Göteborg, annan ort där Husqvarna idag är etablerat kan diskuteras. Vi tillämpar hybrid-arbetsplats.
 
Vad händer efter min ansökan?
Innan sista ansökningsdag har passerat går vi igenom din ansökan för att se hur väl din profil matchar kraven för tjänsten. Ser vi dig som en av våra potentiella kandidater kommer vi kontakta dig för en intervju. Om du inte går vidare i processen blir du informerad om detta senast när vi har tillsatt tjänsten. Vi intervjuar kandidater löpande och tjänsten kan komma att tillsättas innan sista ansökningsdag. Vänta därför inte med att söka! 
 
Denna rekrytering sköts av OnePartnerGroup i Göteborg, rekryterare Tania Benitez. För frågor om tjänsten maila [email protected]

Gällande ansökan så sker det via annonsen på OnePartnerGroups hemsida, vi hanterar inte ansökningar via mail på grund av GDPR.

Välkommen med din ansökan! Visa mindre

Testingenjör till ett ledande företag inom fordonsbranschen!

Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt. Information om tjänsten Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult. Vår grupp, Transmission Verif... Visa mer
Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt.

Information om tjänsten
Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult.

Vår grupp, Transmission Verification, består av 16 högkvalificerade och passionerade kollegor som arbetar i olika roller. Vi testar våra världsklassväxellådor för både elektriska och konventionella drivlinor, och pressar dem till gränsen och bortom. Vi arbetar med alla typer av fysisk verifiering, från komponentnivå till kompletta fordon och NVH, för både elektrisk och konventionell framdrift. I gruppen finns både nyfikna datautvärderingsnördar och pragmatiska, uppfinningsrika praktiker. Vi vill göra en skillnad genom att vara där för våra kollegor och kunder genom att säkerställa pålitliga, säkra och tysta produkter.

Den här rekryteringsprocessen hanteras av Professionals Nord och önskemålet är att alla frågor kring tjänsten går till [email protected]

Arbetsuppgifter
Som testingenjör kommer du att fokusera på mekatronisk växellådsverifiering för en mängd fordon inom fordonsbranschens ledande företag. Ditt huvudansvar i teamet är att genomföra olika verifieringsaktiviteter, särskilt på växellådans systemnivå i testcellen. Du kommer att hantera hårdvarutestning med kontakt mot mjukvaran och ansvara för planering, dagliga arbetsuppgifter, kommunikation och dokumentation, samarbetande med kollegor och intressenter.

Det förväntas att du har en förmåga att planera provning för att maximera utnyttjandet av provrummet och utrustningen och snabbt identifiera och lösa problem med provobjekt eller utrustning. Vidare har du förmåga att dela kunskap inom gruppen och med andra testingenjörer och en analytisk förmåga att kunna göra en första analys av provresultaten.

Vi söker dig som

• Har en kandidatexamen och/ eller masterexamen inom Automation, Mekatronik, Mekanik, Maskin eller motsvarande. 
• Det är även meriterande om du har erfarenhet av relevanta verktyg för både mätning och datavärdering samt innehar körkort för lastbil.

Dina personliga egenskaper är avgörande för hur väl du kommer trivas i rollen. Som person är du en lagspelare med en positiv attityd och serviceinriktning. Du är flexibel och kan snabbt byta fokus och anpassa dig till nya arbetsuppgifter. Du är snabblärd och har ett genuint intresse av att lära dig nya teknologier och provningsmetoder.

START: April 
OMFATTNING: Heltid
STAD: Göteborg
URVAL: Sker löpande
KONTAKT: Adrian Couture 

Sök tjänsten nedan genom att fylla i din information samt bifoga dokument. Logga gärna vidare in på "Mina sidor" efter att du bekräftat ditt konto, här kan du skapa din kandidatprofil vilket utökar din chans till drömjobbet! Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på [email protected]

#provingenjör #testingenjör #tekniker #provning #automation #mekatronik Visa mindre

Vehicle Safety Regulation Specialist

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. ." Do you want to take the challenge to contribute to make our vehicles even safer? Do you want to contribute to create a world where road death is reduced to zero? Do you want to support a Global organization influencing the vehicle regulation development on vehicle safety (general ... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. ."

Do you want to take the challenge to contribute to make our vehicles even safer? Do you want to contribute to create a world where road death is reduced to zero? Do you want to support a Global organization influencing the vehicle regulation development on vehicle safety (general safety, active safety, passive safety, …)? 
Lots of safety systems contribute, already today, to decrease fatalities and to mitigate injuries when accidents occur. However, new vehicle regulations continuously strengthen requirements on our products to increase their safety. We are looking for a regulation specialist who feels comfortable interacting externally with rule makers/stakeholders, to monitor and influence vehicle safety regulation development.

Have you worked with the EU General Safety Regulation? Does WP29, GRSG, GRSP… resonate with you? Then you can be the one!
Your future team
The Product Regulation team is an inclusive team with 6 different nationalities, working on 4 different sites, and connecting with a global network.
What you will do
You will work with regulatory agencies in EU (mainly EU Commission) or in UN (WP29 and subgroups in the United Nations) to influence the development of vehicle safety regulations. To do so, you will, internally, lead and maintain networks to prepare and to anchor the Volvo’ positions. You will act as a Volvo representative within Manufacturers Associations. You will work with our competitors to build consensus positions, in respect of the Competition Law Compliance (CLC). And you will secure our Volvo’s position is well reflected in the industry position. You will promote this industry position to the Members States and other key stakeholders.
You will also have a key responsibility to communicate, internally about the future regulatory development and potential associated risks, and to support Volvo compliance activities. 

Who are you?
You have a strong background / experience in the Automotive Regulations area, and in their developments in the EU and in Geneva (UN/WP29). You are familiar with the EU General Safety Regulation (GSR) and the Framework regulation, and you have experience in this area as a regulation specialist. 
As a member of a global Network you are expected to have an open multi-brand and multi-cultural mindset, to be a network builder, a good team-worker, to be business and customer oriented and to demonstrate courage and integrity.
We believe you are creative and have the mindset to constantly learn and progress. We are expecting that your personality and desire will allow to drive and influence the regulation development in a challenging domain. You should also have a “can do” attitude and take pride in your work.
Working in a global environment, you have excellent verbal and written English skills. You have as well negotiation skills and experience of finding compromise (in English). You have good communication skills and an impressive capacity to analyze/summarize texts to focus on key issues.
Other qualifications needed:
•    Bsc/Msc in mechanical or electrical engineering, material or mobility engineering
•    At least 3 years’ experience in regulation development in the Automotive Safety area in EU or UN/WP29, 
•    Experience with Automotive business, 
•    Collaborative and able to cultivate trustful relationships and networks across organizations (internal – external)
•    Well-developed ability to efficiently formulate and present future regulatory challenges to different set of stakeholders. 
•    Fluent English, both written and oral. Master of Science or Bachelor of Science in Engineering 

What’s in for you?
We offer a solid package of compensation and benefits, plus you will enjoy: 
-    The expertise, diversity of background and experience of the Product Regulation team
-    The opportunities to work in a truly global company.
-    A workplace that brings the best out of everyone.
-    Flexible arrangements
-    Location in Goteborg preferably, potentially in Lyon

This role will include occasional travel. 

Our values are Trust, Passion, Change, Performance and Customer Success. If they light your inner fire, you might be the right person to support our team!

If you are curious and have some questions, Please contact me: Marie-Pierre Daurelle, Director Global Product Regulations : [email protected] - +33 6 64 40 34 66

Last application date 6th of April. 



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Visa mindre

Experienced Design Engineer

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Role description

The Chassis Structure and Transport Adaptation team is today we are 14 engineers from 3 different countries working together with a truly global team involving professionals in India, Brazil, France, USA, and Sweden.

Your mission:
In this position you will be part of the development of Transport Adaptation area that consists of the primary areas; Mechanical body builder interfaces and mechanical systems for trailer connections. You will be responsible for the development of certified components connected within the Transport Adaptation responsibility.  You will be part of a cross-functional team involving Purchasing, After Market and Operations.
As Design Engineer, you will take the lead in different stages of Product Development from the earlier development phases to the start of production and continuing to the product maintenance phase.


Who we believe you are:

We are looking for a person with a positive attitude and ability to interact, network and cooperate effectively. In addition, someone who has a drive to draw conclusions, deliver results and who is interested in improving work methods will be greatly appreciated in our team and organization. We also believe it is important that you can lead a cross-functional team and secure the deliveries in time and with the expected quality within your scope of the Chassis Structure responsibility.
To succeed in this role, we believe you have experience of cross-functional operations and knowledge of heavy-duty vehicles. We also believe you understand the component development process. Experience with project management as team member is also valuable and knowledge of product documentation: Legal documentation, Requirements, Product and Process Documentation, etc.

We also see that you have:

•    Master of Science in Mechanical Engineering or similar technical education.
•    Fluent in English, written and spoken.
•    Good Knowledge of sheet metal design, extruded aluminum and casted components
•    Knowledge of certified and supplier developed components.
•    Proficiency in FMEA, APQP, generative design and Root Cause Analysis.
•    Experience as Project Manager is a plus.

If you also have experience from Volvo Group Trucks Technology Organization that is considered a merit. We also consider it a merit if you have knowledge in systems and tools such as KOLA, EDB, PDMLink, Creo, PIL, Protom, Knox, Argus, Tech tool, JIRA.

Ready for the next move?

All that we have just listed as who we believe you are, is our dream candidate in a perfect world. We understand that you might not match all qualifications to 100% yet. Most importantly, we will value your personal skills, your positivity, proactivity and flexibility, customer focus, team player ability and communication skills. 

Curious and have some questions? Contact us!
Matilda Johansson – Group Manager Chassis Structure & Transport Adaptation
[email protected]



We value your data privacy and therefore do not accept applications via mail. 
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. 

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Compliance Engineer

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

Position Description

Sustainable transports, a futuristic scenario? It is already happening! Our mission is to make transport industry sustainable and safe – Do you want to be with us on the journey forward? Do you find energy in bringing structure and alignment whilst managing complex topics? Are you also a person who are eager to learn, develop and grow your talents? Perhaps you even share our passion for heavy trucks? Then you might be the star we are looking for!
We are now, to our Compliance team in GOT, recruiting a compliance engineer. The position offers a stimulating and dynamic work environment, with a high amount of interaction with colleagues throughout the Volvo Group and external partners.

About Vehicle Certification & Compliance

Vehicle Certification & Compliance is part of Complete Vehicle (CV) Organization within Group Trucks Technology (GTT). At Complete Vehicle, we manage areas from product design & feature development, verification and validation, certification, aftermarket, customer quality services. 
The Vehicle Certification and Compliance teams covers EU/UNECE regulations and over 50 requirement areas and acts as a bridge between design engineer, manufacturing, and sales 
The certification and compliance dept in GOT consists of two teams; Vehicle Compliance team and Vehicle Certification team.
The Compliance team in GOT are responsible to secure measures are taken to stay compliant over time, to secure correct handling of cert and compliance data is crucial. The compliance process spans across Volvo Group and gives great opportunities to meet and interact with colleagues world-wide. Our team plays an important role in securing compliant products.
The compliance team in Got are now looking for a compliance engineer.

Job Description
In the compliance team we are responsible for having an updated view of compliance status for the products, our main deliverables are:
* Secure compliance statement and give compliance statement report based on COP
* Recommendations for actions needed to ensure compliance
* Communication with authorities regarding compliance
* Handle and monitor Market surveillance activities
* Coordinate and develop way of working for compliance including IT- tools for checking compliance.


To be successful in this role you will need:
* A Master’s degree in engineering or equivalent
* Truck-, and/or vehicle product knowledge
* Previous experience from working with compliance, certification, legal or regulatory domains.
* Ability to bring structure in complex tasks and excellent communication
* Knowledge in change management and previous experience from data management


What we can offer

We believe you are a professional with genuine interest in compliance & technology. We believe that you are well-organized and know the importance of delivery precision. As a person, you are curious, positive and possess a strong problem-solving mindset. Being a team-player is important to us, and we also expect excellent communication skills. We are certain you also feel comfortable in hosting meetings.  We think you have experience from change management and IT development.

Ready for the next move?

We offer a position within an innovative and inspiring environment, in a diverse team with highly skilled engineers. In this position you will get the opportunity to develop both your personal and professional skills. Our domain is dynamic and with the intensified sustainability-, and safety requirements from governments, authorities, and ourselves – you will get a chance to be in the forefront of product development.
We are prioritizing a high level of diversity in our workforce, and we see this as a advantage. We believe that it is the people in the team and our ability to cooperate that makes all the difference. 
If you think you are the right candidate for this position, then please do not hesitate to send us your application! 
For further information contact: Maria Bergström, Group Manager, Vehicle Compliance +46 31 322 49 92

We value your data privacy and therefore do not accept applications via mail. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Visa mindre

Thesis Worker - Design of aero acoustic contraction device

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." De... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Design of aero acoustic contraction device - BSc Thesis Work 15 ECTS
The Bachelor of Science Thesis work will be performed at Volvo Group.
The thesis work is initiated by Volvo Group Trucks Technology department, which is responsible for product development within the Volvo Group.
Flow generated noise has a significant impact on driver comfort. Investigation of flow generated noise can be made in several ways, the aim of this thesis work is to design a device to direct flow in a controlled environment.
You will design a contraction device that fits current equipment. The work will include the following topics:
* 3D scanning of interface between contraction device and current equipment
* Create a digital twin of the scanned equipment
* Design contraction device, fastenings and connections based on literature study and simulations
* Perform calculations of forces acting on the device

Your profile:
* Bachelor of Science student at mechanical engineering program
* Knowledge in CAD
* Knowledge in aerodynamics is beneficial
* Knowledge in geometrical measurement methods is beneficial


Industry supervisors: Torbjön Ågren, Birk Forsström at Volvo GTT
Contact persons:
Torbjörn Ågren, Volvo Group, telephone: +46 31 3238573
Birk Forsström, Volvo Group, telephone: +46 739 023015
Janos Turcsany, Volvo Group, telephone: +46 31 3234876
 We value your data privacy and therefore do not accept applications via mail. 
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Mechanical Engineer Shift System

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

As a Global Component Responsible Engineer in the gear shifting team you will work together with your engineering colleagues securing the product design on component level from early development to aftermarket trouble shooting. You will be part of cross functional teams working together with colleagues from different parts of Volvo group and our suppliers to secure the correct products within the limits on both time and cost.

Your future team
We in the Shift system and Clutch group are 12 engineers working with hardware development for the shift and clutch systems for most of Volvo's products on wheels. Some of us have long experience of life, Volvo and gearboxes while others are newer to the game. We are supportive and most of the problems we encounter we manage to solve within our team both when it comes to workload and challenging technical tasks.


Who are you?

We think that you can work by yourself driving your tasks and connect to others and deliver as a team. We moreover think that you are open for all types of engineering tasks and have a collaborative attitude and a result-oriented mindset. As you will be working in a broad and diverse network, we think that you are fluent in written and spoken English. In addition to this, you have the ability to adapt when faced with new challenges and take the lead as functional leader for your engineering tasks and with some experience more complex team activities.
So, to the formal requirements of this position:
We think that to do this job well you need and engineering degree in mechanics, physics or mechatronics. We also think that it's good if you have experience from Powertrain engineering.

What’s in it for you?

We can't promise you an effortless job, but what we can promise you is really skilled colleagues and some truly exciting challenges to work with. You will start your mission here in the middle of the technology shift and this will provide you with development opportunities both professionally and personally. We at Volvo Group want you to prosper and grow, because when you succeed, we succeed and together we drive prosperity.


Ready for the next move?


If you a questions please reach out to recruiting group manager Emilia Söderström at [email protected]
Last application date is the second of April. 
We are shaping the world we want to live in. Join us on our mission.  


We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. 

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

System Test Engineer

Ansök    Mar 18    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a System Test Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad E... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a System Test Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities. Please apply at www.randstad.se, no later than 2024-04-08. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
Complete Electrical Verification team is responsible for Electrical Integration-, Base Technology- and Vehicle Mode Management testing. In addition, we also deal with Advanced Fault tracing and Test lead function. We are now looking for another talent engineer within Function Health Check area to strengthen our team!
To be successful in this assignment we expect you to:


Perform E2E Function tests in vehicles and test setups as main responsibility
Support with fault tracing in vehicles and test rigs
Log files analysis
Perform Basetech tests
Give Basetech test tool support
Perform Vehicle Mode Management tests
Perform Network and communication system test
Provide test support internally and to suppliers. Assess deviations
Support test engineers at cooperation partners


Qualifications
Qualifications and skills required for the role E.g. degrees, years of experience, competencies needed


M.Sc. or B.Sc. in Electrical or Computer Engineering or equivalent area
Car driving license and T1/T2 test driving license Hällered needed
Hands on experience in vehicle required
Good knowledge of in vehicle electrical systems in general.
Deep knowledge in communication protocols (e.g. CAN, FlexRay, Ethernet, LVDS, LIN)
Strong Vector tools experience
Test automation knowledge
Experience from AUTOSAR specifications and architecture
Experience from Volvo Cars Electrical Platform or CEVT CMA/GEEA2/ZEEAx platform is an advantage
Deep experience in test tools such as CANoe, DSA, Wireshark
Experience in CAPL script and Python programming.

Personal attributes
Cultural awareness, especially Asian – European culture
Excellent skills in co-operation, teamwork and networking
Do:er and “walk the extra mile”-attitude needed to be successful.


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential. With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Fordonsintresserad Testingenjör till global jätte!

Ansök    Mar 14    Friday Väst AB    Civilingenjör, maskin
Är du snart färdigutbildad civilingenjör och vill vara en del av ett globalt företag inom fordonsindustrin? Besitter du sedan innan ett intresse för att mecka med bilar och vill kombinera dina erfarenheter med att arbeta hårdvarunära i in yrkesroll? Nu söker vår kund inom fordonsindustrin deras nästa Juniora Testingenjör! Om tjänsten I din roll som Testingenjör kommer du ha en bred och varierad roll. Du kommer ingå i ett team på totalt 16 personer och ... Visa mer
Är du snart färdigutbildad civilingenjör och vill vara en del av ett globalt företag inom fordonsindustrin? Besitter du sedan innan ett intresse för att mecka med bilar och vill kombinera dina erfarenheter med att arbeta hårdvarunära i in yrkesroll? Nu söker vår kund inom fordonsindustrin deras nästa Juniora Testingenjör!



Om tjänsten
I din roll som Testingenjör kommer du ha en bred och varierad roll. Du kommer ingå i ett team på totalt 16 personer och detta är ett relativt juniort team med olika bakgrunder, där du kommer få bra stöttning inledningsvis. Teamet fokuserar främst på testning av växellådan på lastbilar, det förekommer även testning av små komponenter till stora motorsystem och bakaxel. Utförandet av testerna du kommer utföra på daglig basis sker både i de olika riggarna och i vagnar. Du kommer främst jobba med hårdvara men med inslag av att jobba mjukvarunära då teamet arbetar nära fordonet. De främsta språk du kommer jobba med är Matlab och Python.

Detta är en fantastisk möjlighet för dig som är junior då du kommer få jobba med flera moment såsom programmering, provning och dataanalyser.



Vi söker dig som
Civilingenjör inom maskin alternativt mekatronik
Grundläggande kunskaper inom Python och MatLab
Talar och skriver obehindrat på svenska och engelska då språken används internt
Tidigare arbetslivserfarenhet inom något område


Då du kommer arbeta inom fordonsindustrin är det meriterande om du kan visa på fordonsintresse genom att till exempel gjort exjob mot fordon, ingått i Formula Student eller motsvarande förening. För denna tjänst sätter vi stor vikt vid dina personliga egenskaper. För att trivas i rollen tror vi att du beskriver dig som noggrann och ansvarstagande samt har ett intresse för struktur och ordning och reda. Vidare ser vi att du är van att ta egna initiativ för att driva ditt arbete framåt, och trivs med att ha tydliga mål och deadlines. Du har lätt för att kommunicera och trivs i ett samarbete med andra 



Om anställningen


Detta är ett konsultuppdrag vilket innebär att du kommer till en början att vara anställd av Friday. Ambitionen från Kunden och vår sida är att du efter 6–12 månader blir direktanställd hos kunden.

 Omfattning: Heltid
 Start: juni eller juli
 Kontaktperson: Stina Högström, [email protected]
Lön: Fast månadslön


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen.



Om Friday


Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter.

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik.

Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Group Design Lead Mobility

Together Tech är med och utvecklar innovativa produkter och digitala lösningar. Vi tror på att skapa en inkluderande, dynamisk arbetsplats och uppmuntrar våra medarbetare att kombinera sin starka tekniska kompetens med viljan att utmana för att skapa en mer hållbar framtid. Vårt erfarna Mobility-team i Göteborg ser framtida möjligheter att utöka med både seniora och juniora projektledare. Som GDL har du en projektledande roll med fokus på löpande uppdater... Visa mer
Together Tech är med och utvecklar innovativa produkter och digitala lösningar. Vi tror på att skapa en inkluderande, dynamisk arbetsplats och uppmuntrar våra medarbetare att kombinera sin starka tekniska kompetens med viljan att utmana för att skapa en mer hållbar framtid.

Vårt erfarna Mobility-team i Göteborg ser framtida möjligheter att utöka med både seniora och juniora projektledare. Som GDL har du en projektledande roll med fokus på löpande uppdateringar av interiöra och exteriöra detaljer inom fordonsindustrin. Du blir del av ett agilt team med ansvar för att driva och säkerställa tid, kvalité och kostnad inom specifikt område och gentemot projektplan. Du kommer att arbeta brett och i nära samarbete med såväl interna som externa intressenter så som produktägare och underleverantörer. Läs mer om vårt engagemang inom området Mobility (https://www.togethertech.com/sv/erbjudande/mobility).

Din tekniska bakgrund

- Master-/Kandidatexamen inom Maskin, Mekanik, Industriell ekonomi eller närliggande område.

- Du har erfarenhet av att driva och koordinera projekt samt att arbeta gentemot flera kontaktytor.

- God förmåga att uttrycka dig på svenska och engelska professionellt, både skriftligt och muntligt.

- Extra plus är erfarenhet inom Catia, KDP, Teamcenter samt materialkunskap.

Dina personliga egenskaper

Att vara konsult kräver en flexibel och nyfiken grundinställning, ett självständigt arbetssätt och förmågan att bygga starka relationer med kunder och kollegor. I projektledarrollen är du en lagspelare med högt driv och en "can do"-attityd. Du är motiverad att utvecklas tillsammans med oss.

Together Tech för hållbar produktutveckling

Vi ger möjligheter till utveckling genom en variation av uppdrag inom olika branscher och områden, i uppdrag hos kund eller i något av våra in-houseprojekt. Hos oss på Together Tech arbetar du tillsammans med andra ingenjörer som brinner för miljö och hållbarhet, alla med en vilja att skapa bestående lösningar med hjälp av teknik - eller som vi säger: Better World Tech!

Din utveckling & vårt stöd????

Din utveckling och ditt välmående är viktigt för oss varpå vi erbjuder förmåner som stöttar dig och din karriär på bästa sätt. Vi värdesätter vikten av trygg anställning och fast lön, och är kollektivanslutna. För att främja din hälsa erbjuder vi friskvårdsbidrag på 4000 kr per år och även hälsoundersökning, bidrag till aktiviteter och friskvårdsrabatter.

Vi gillar att umgås med varandra i olika sociala aktiviteter, som passar alla! Alltifrån afterworks, sportaktiviteter och 5-kamp till företagskonferenser. Vi strävar efter att ge dig förutsättningar att växa genom olika uppdrag och projekt samt individuella utvecklingsplaner. Vi erbjuder även kurser inom hållbarhet och andra områden inom ramen för din roll och dina mål. Vi är stolta över att vara utsedda till en av Sveriges mest attraktiva arbetsgivare 2024! ????

Vill du veta mer om oss, besök gärna vår hemsida www.togethertech.com (https://www.togethertech.com/sv)

För frågor kring den aktuella tjänsten kontakta BUM Anders Lüborg (mailto:[email protected]), 0700-889796 eller BUM Martin Gerhauser (mailto:[email protected]), 0709-527369. Visa mindre

Software Verification Engineer Safety Electronics

Ansök    Mar 11    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Software Verification Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Software Verification Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-03-31. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
As a Software Test Engineer, you are responsible for the verification in Safety Electronics test team at Base Function Verification Team.
• Preform system and function testing of Safety Electronics
• Develop test methods for area and incorporate specification requirement to develop testing
• Collaboration with colleges in China in system, function testing areas
• You will be reporting to the Passive safety Test Leader and be a part of the Base Function Verification Team
• You will get opportunity to work closely with SW inhouse design team

Qualifications
• B.Sc. Electrical or Computer Engineering or similar.
• 5 years’experience of verification of automotive environment.
• Test engineer that has good knowledge of Vector tools and communication of (CAN FD, LIN, FlexRay, Ethernet Automotive).
• Experience of automotive test in vehicles and knowledge in writing Design verification methods
• Swedish driver’s license


Personal attributes:
• Travels to China will be needed (approx. 4-6 per year).
• Ability to drive, motivate and convince.
• Everyone in our team has a high level of responsibility and mandate and is expected to be able to work autonomously.
• Mandarin speaking is an advantage.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.
With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Mechanical Design Engineer within Inverter Design

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
About the role:
As a Hardware Mechanical Design Engineer, you will play a key role in developing electrical hardware and electric motor drive systems. Collaborating in a dynamic environment, you'll work with skilled engineers and engage with internal and external partners. Bring your visionary thinking, enthusiasm, strong knowledge, and effective communication skills to this role, elevating our work to new heights and contributing to the development of next-gen technologies in a team environment.

Your major responsibilities are the following:
•    Providing Volvo Group with support and expertise within the competence area
•    Contributing to development work with suppliers and technology partners
•    Leading process planning with a strategic approach
•    Participating and providing process and technical results in product development projects
•    Evaluating technical solution and preparing technical requirement and documents
•    Collaborating and conducting test plan, time plan and supporting engineers within the team
•    Work cross functional with both internal and external suppliers

To succeed in this role, it is essential to possess the following qualifications:
•    Master's degree (M.Sc.) or higher in Mechanical Engineering, Hardware Electrical Engineering, or Automotive Engineering.
•    A minimum of 2 years of hands-on involvement in automotive product development.
•    Proficiency in electric product development and design, particularly in electric motor drives and inverters.
•    Familiarity with CAE packages for thermal, CFD, or mechanical simulations.
•    Knowledge of Geometric Dimensioning and Tolerancing (GD&T).
•    Practical experience in assembly, commissioning, and decommissioning processes.
•    Proven expertise in developing technical requirements in collaboration with suppliers.
•    Familiarity with automotive standards, requirements management tools, and process tools.
•    Fluency in spoken and written English. 
Also, you should demonstrate the following personal attributes:
•    Decision-making skills, showcasing the ability to balance available facts and exercise judgment within given time frames.
•    Effective team engagement in a collaborative manner, with a commitment to achieving results and performance excellence.
•    A solution-oriented mindset, actively seeking opportunities and embracing innovative approaches.
•    A structured yet creative approach to problem-solving.
•    Strong networking skills across various functions.
•    Perseverance and commitment to follow through on tasks.

The position title can be customized based on the candidate’s personal competences. 
You will be working within Electric Motor Drive team (in Electromobility Department) which is managed by Emad Samadaei, Group Manager Electric Motor Drive. 
We are looking forward your application, no later than April 15th, 2024.

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Geometry Engineer

Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Plant Geometry - let’s introduce ourselves.
Our purpose is to secure Volvo Cars ability to build cars efficiently and with the right geometry from Body Shop to Final Assembly, fulfilling all Final demands and related car properties. 

We contribute to the geometry assurance work through geometry verification from single parts, in-house subassemblies, subsystems and for complete vehicle.

We are heading into an exciting future with electrical propulsion systems in our future cars. We are in middle of a build-up phase of the new battery plant and a new mega casting shop that we will be a part of. Do you want to join us on this exciting journey? Read more below.

What you’ll do
As a Geometry Engineer you’ll represent and speak on behalf of Plant Quality regarding geometry according to established development models & processes, specific directions, and guidelines. During running production you’ll lead, drive and follow-up daily operational analyzes and improvement activities connected to product, process, and suppliers. You will handle incoming problems from the plants and carry out corrective measures to ensure the right geometrical requirements. We are reviewing activities and plan for corrective actions daily where you’ll play a crucial part. 

During the project phase you will lead the VIRA-tasks of Perceived Quality demands between TT to Final Status Report. You will participate and ensure that the plant has the ability and prerequisites to fulfill geometric requirements both in project phase, but also during running process. In the role you will support with Geometry expertise, initiate management systems of geometrical issues and develop and conduct the trim part coordination process.  

You’ll also
* Develop the Geometry Assurance function and work methods within the geometry department within the plant and between the plants. 
* Feed the up-streams lessons learned and continuous improvement work towards Geometry methods and system solutions to secure Volvo Cars business objectives. 
* Develop, lead, and perform continuous education & training of Geometry methods, principles, cross functional interactions, and tools to the plants.


What you’ll bring
We are looking for you who can lead and manage workgroups while at the same time be a genuine team player within the team. In this role you need to be a strong communicator and have good interpersonal skills, with the ability to work effectively in cross-functional teams. You also have analytical thinking with an ability to structure and prioritize and good problem-solving skills. 

We see that you have a bachelor’s degree within a technical field, or equivalent work experience. To succeed in this role, you’ll need to have at least 2 years of professional experience within manufacturing assembly and strong knowledge of manufacturing process of Body Shop and Final Assembly. It’s meritorious if you have gone through at least one project, commissioning, and implementation. 

You also have
* Good communication skills in English, oral and written.
* Proficiency in CAD/CAM software’s such as Teamcenter and Catia.
* Interest and actively follows the technical development in the field. Visa mindre

Teknisk Projektledare inom Maskinsäkerhet

Vill du bli en del av Sveriges starkaste team inom funktionssäkerhet, maskinsäkerhet, informationssäkerhet och cybersäkerhet? Är du nyfiken på framtida teknik, AI och hur vi kan utveckla autonoma tillämpningar på maskiner och fordon? Då kommer du trivas hos oss! I januari 2027 ersätts Maskindirektivet av Maskinförordningen som tar hänsyn till ”ny teknik”, vilket bl. a. innebär krav på cybersäkerhet, skyddande av programvara och krav på maskiner som har... Visa mer
Vill du bli en del av Sveriges starkaste team inom funktionssäkerhet, maskinsäkerhet, informationssäkerhet och cybersäkerhet? Är du nyfiken på framtida teknik, AI och hur vi kan utveckla autonoma tillämpningar på maskiner och fordon? Då kommer du trivas hos oss!

I januari 2027 ersätts Maskindirektivet av Maskinförordningen som tar hänsyn till ”ny teknik”, vilket bl.

a. innebär krav på cybersäkerhet, skyddande av programvara och krav på maskiner som har ett självlärande beteende (AI). Införandet av Maskinförordningen är såväl en utmaning för industrin som en möjlighet för RISE att stödja svensk industri och stärka näringslivets konkurrenskraft, vilket är ett uppdrag som vi har fått från regeringen.

Om oss
Välkommen till Enheten Säkra styrsystem som arbetar inom området funktionssäkerhet och maskinsäkerhet för inbyggda system, maskiner och fordon. Vi arbetar även med informationssäkerhet och cybersäkerhet samt utvärdering och test av olika typer av mätinstrument, medicinteknisk utrustning, larmsystem och datainsamlingssystem.

Idag är vi ett team på 17 medarbetare bestående av kompetenta specialister, ingenjörer och projektledare. Vi är placerade i Borås och Göteborg och därmed är placeringsort tänkt i någon av städerna men även andra placeringsorter kan diskuteras. Vi utgår idag från ett hybridarbetsätt där de flesta av våra medarbetare delar sin arbetstid mellan kontoret och hemarbetsplatsen.

Om rollen
Vi söker en affärsmässig projektledare med kunskap om maskinsäkerhet och CE-märkning av maskiner. Du lägger merparten av din tid i spännande kunduppdrag där du stöttar industrin och offentlig sektor i arbetet med att utvärdera och CE-märka maskiner av olika slag. Det kan handla både om större komplexa projekt och om mindre uppdrag du utför på egen hand. Vi har även många uppdrag inom funktionssäkerhetsområdet och arbetar tätt med kollegor inom olika avdelningar och divisioner på RISE som specialiserar sig på t.ex. elsäkerhet, EMC och cybersäkerhet.

Med rätt bakgrund kan du vara en nyckelperson när vi tar helhetsansvar för större uppdrag inom maskinsäkerhet och CE-märkning och breddar våra erbjudanden till nya branscher och produktområden. Det kommer även finnas möjligheter att hålla föreläsningar, workshops och arbeta med standardisering och paketering av nya erbjudanden. 

Tjänsten kan komma att omfattas av uppgifter som rör Sveriges säkerhet. Det kan komma att krävas statlig säkerhetsprövning, nu eller längre fram och du behöver vara svensk medborgare eller EU-medborgare med anledning av det.

Vem är du?
Du är civilingenjör eller högskoleingenjör inom elektronik/mekatronik/maskinteknik eller likvärdigt. Du behöver ha erfarenhet av maskinsäkerhet och CE-märkning och gärna kunskap om Maskindirektivet samt riskanalyser enligt EN ISO 12100. Det är meriterande om du har erfarenhet av projektledning av komplexa projekt och att sälja in den här typen av uppdrag och projekt till olika intressenter och beslutsfattare på kundsidan. Det är även meriterande om du har branscherfarenhet som kan vara till nytta för våra kunder, exempelvis från tillverkningsindustrin, processindustrin och/eller produktutveckling.

För att trivas i rollen är det viktigt att vara kommunikativ och tycka om att ha kontakt med kunder, partner och kolleger. För att lyckas väl behöver du kunna sälja in och projektleda små och stora uppdrag och vid behov utföra delar av uppdragen självständigt såväl som i samarbete med andra. Vidare är du utåtriktad, nyfiken och kreativ och har förmågan att skapa långsiktiga kundrelationer. Du har god förmåga att uttrycka dig i tal och skrift såväl på svenska som på engelska.

Är vi rätt för varandra?
Hos oss kommer du att få möjlighet att arbeta i ett växande företag där det händer mycket. Inom RISE är vi övertygade om att mångfald bidrar till en innovativ miljö där vi tillsammans utmanar gränser och utvecklar ny kunskap och kompetens för framtiden. Hos oss får du möjlighet att göra skillnad på riktigt.

Välkommen med din ansökan!
Låter detta spännande och du vill veta mer så är du välkommen att kontakta Maria Sjöström, Enhetschef Säkra styrsystem, +46 10 516 50 76 eller Per Landström, Projektledare Maskinsäkerhet, +46 10 516 52 35. Sista ansökningsdag är den 4 april 2024. Intervjuer kan komma att ske löpande under ansökningsperioden.

Våra fackliga representanter är: Ulf Nordberg, SACO, +46 10 516 69 59 och Linda Ikatti, Unionen +46 10 516 51 61. Visa mindre

Mechanical Integration Engineer

Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Are you a Design Engineer looking for a new role, in which your leadership and collaboration skills could thrive? 

At Engineering you will be a key contributor to the next generation outstanding luxury mobility from Volvo. Together with other engineers around the world, you and your team will create innovative human-centric car technology that makes life less complicated and more enjoyable for people. Are you interested in design and connected car technology? Do you share our passion for people, the environment, and our urge to create a superior driving experience? Engineering is the place for you to prosper.

The department Mechanical Architecture & Integration in the unit Complete vehicle has the responsibility to coordinate mechanical and geometric system integration of complete cars and platforms. The car is divided into seven blocks, each one under the responsibility of a Block Leader. We are looking for a Mechanical integration engineer to the Platform group.

What you’ll do

As a Mechanical Integration Engineer you will facilitate the concept development in your area of the car in the later part of the concept phase, and further balancing of design solution into the engineering phase. You will balance the geometric requirements and solutions from among others: Attribute Leaders, Product Design and Manufacturing to an agreed and well-functioning car. This important phase is the foundation for all further development work. The role also includes to propose or design own suggestions for design solutions and to support Block Leaders with data for reporting in the various decision-making forums. Good communication skills are required in this cross-functional role and you will build and maintain an extensive network throughout the company.

As the car industry right now is entering a new era you will also play an important part of the transformation for Volvo cars and Mechanical Architecture & Integration in the adaptation to these new times. A positive mindset also when the goal isn’t clearly defined is an important competence.

Main responsibilities:
* Guide the concept development in the area
* Balancing of design solution into the industrial phase
* Balancing geometric requirements and solutions
* Develop design proposals for technical solutions/manufacturing process in CATIA V5
* Perform benchmark studies on competitors
* Orchestrate Vehicle Integration meetings

We are looking for someone with a technical education (BSc or equivalent, for example through years of practice) who has basic knowledge of product development processes within automotive. Experience from Team Centre Engineering and VisMockup is meritorious as well as knowledge in CATIA V5. You possess the ability to coordinate cross functional teams and meetings within different areas. You are also experienced in working with Microsoft office as well as fluent in English written and spoken.

On a personal level, you consider yourself to be curious and vision oriented with a good sense of being analytical and structured. You are a skilled communicator and are comfortable with argue your case in front of larger groups. You also have technical and leadership skills and are creative and self-managed in your day-to-day job, while collaborating with the team. Finally, you have an open and positive mindset! Visa mindre

Measurement Engineer

. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.  Position description Do you want to talk to Trucks? Measure their health and ability to perform their tasks? Support our test engineers with measurements and sensor... Visa mer
.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
Position description

Do you want to talk to Trucks? Measure their health and ability to perform their tasks? Support our test engineers with measurements and sensors to make the future test techniques a reality?  If yes, it’s time to send your application right now! We support a variety of reliability, durability, and performance testing for groups within Volvo Group like Electromobility, Autonomous Solutions and all new technology areas with equipment and technical support. Come on board and be a part of the team, either as a pro who improve our skills and performance or as a passionate new college which we can inspire to grow.

In this position, as a Measurement Engineer you will:
* Support to our global testing departments within Group Trucks Technology, Volvo Autonomous Solutions, Volvo Buses etc with data acquisition systems for various function, performance and feature verification and validation tests.
* Work closely within a team of experts to make sure all requests from our internal customers can be planned and delivered in time.
* Based on plan, ensure that all devices are configured to capture the right signals from the in-vehicle networks so the right data is captured.
* Participate in testing and verification of processes/products (software/hardware) in different environments such as test rigs, providing grounds and customer trucks.
* Have contact with the test leaders and engineers to ensure we deliver the service and support requested.
* Be involved in different kinds of investigations and test-to-learn activities, as well as education and development of new methods within the measurement area. 


You will also work closely with our suppliers in projects to update our equipment and coordinate systems and tools for best usage with teams on other sites globally. Together with Volvo IT to ensure that the right inputs are given for development of Volvo data acquisition tools.

This is us

You will be part of an open, friendly, and skilled team consisting of passionate people. We work in an optimistic atmosphere, where joy, knowledge sharing, and openness are key characteristics. With us you will have a diverse, friendly, and open-minded team on your side, always providing you the help needed to manage tasks you can’t imagine today! At Volvo Group Trucks Technology, we are actively working to establish teams that will take maximum advantage of the strength inherent in different knowledge, experience, age, gender, and nationality etc.

This is you

We think that you like working with measurements and are interested in things like remote data logging. Or perhaps you like to build your own data collection systems? Maybe you have experience in creating test tools or you just like to improve on things that you encounter. You like to share your knowledge and gain from discussions with other people and departments. A strong customer focus and understanding of customer needs is essential in this position. We believe that you love technology and have a genuine interest in working with the future of transport solutions. To be successful in this position we also think that you are thrilled by challenge and are determined to succeed. You can work independently but appreciate a good team to collaborate with when needed. We also believe that you see the benefits of the mixture of cultures and languages working in a global organization.

To be successful in this role you will need:
* Bachelor’s Degree in engineering (Masters is an advantage)
* Experience of measurement technology, communication, sensors, and measurement systems such as Dewesoft, Ipetronik, MX4
* Experience of field vehicle buses like CAN, LIN, Ethernet, J1587 including their different protocols
* Fluent in both English spoken and written
* Experience in data analysis tools like Matlab or Python
* Experience in tools like ATI Vision and CANalyzer.
* Experience with Volvo internal systems is a merit


We see you as service minded, and our customer is our business, so you have a strong customer focus, understanding the needs and willing to assist to come up with a good solution! If you would like to be part of a great team working in an environment where change is the ordinary, we look forward to your application! Are you interested or do you have questions? Do not hesitate to contact me!
For more information please contact:
Moses Antblad, Acting Group Manager Testing Technology. Phone: +46 76 553 11 79


We value your data privacy and therefore do not accept applications via mail. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Visa mindre

Mekanikkonstruktör till AFRY!

Har du en utbildning inom mekanik och vill bredda din kunskaper? Vi söker dig som är utbildad maskiningenjör eller har jobbat med mekanik och vill ta nästa steg i karriären i rollen som mekanikkonstruktör hos AFRY. Välkommen in med din ansökan, löpande urval! Information om tjänsten Professionals Nord söker nu för AFRYs räkning dig som har någon form av mekanikutbildning och är nyfiken att ta nästa steg i karriären hos AFRY. I rollen som mekanikkonstruktö... Visa mer
Har du en utbildning inom mekanik och vill bredda din kunskaper? Vi söker dig som är utbildad maskiningenjör eller har jobbat med mekanik och vill ta nästa steg i karriären i rollen som mekanikkonstruktör hos AFRY. Välkommen in med din ansökan, löpande urval!

Information om tjänsten
Professionals Nord söker nu för AFRYs räkning dig som har någon form av mekanikutbildning och är nyfiken att ta nästa steg i karriären hos AFRY. I rollen som mekanikkonstruktör hos AFRY kommer du vara verksam inom olika produktgrupper där allt arbete sker i projektform. Dina arbetsuppgifter kommer bland annat vara att:

• I ett störningsfritt utförande, bygga in elektronik i de olika produkterna.
• Arbeta i CAD med att rita elboxar, komponenterna i dem samt förbindelserna mellan dem

Du arbetar även med dokumentation och prototypframtagning som sker i 3d-printer i deras egen labbmiljö. Rollen innebär en tät kontakt och samarbete med övriga kompetensområden såsom mekanik, elektronik och elsystem.

Vi söker dig som:
Har en eftergymnasial utbildning med inriktning mot mekanikkonstruktion. Du har erfarenhet i något av de olika CAD-verktygen, vilket av dem är inte det viktigaste. Vidare har du god kunskap i svenska och engelska i såväl tal som skrift.

Vi tror att dina personliga egenskaper är avgörande för hur väl du kommer att trivas i rollen som mekanikkonstruktör hos AFRY långsiktigt. Vi söker därför dig som har rätt inställning, driv och motivation för att briljera i din nya tjänst. Du har ett stort tekniskt intresse och ett personligt engagemang i ditt arbete. Vidare är du lösningsorienterad, metodisk och noggrann. Du har viljan att utmana dig själv, tar eget ansvar för din kompetensutveckling och du finner det tillfredställelse att aktivt bidra till företagets utveckling.

START: Enligt överenskommelse
OMFATTNING: Heltid
STAD: Karlskoga
URVAL: Sker löpande
ANSVARIG: Mia Haaster

Sök tjänsten genom att klicka på "sök jobbet" nedan. Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på [email protected]

#CAD #konstruktion #mekanik #elmek #AFRY #el #maskinteknik #maskiningenjör #mekanikkonstruktion #mekanikkontruktör #mechanicalengineering #fordonsel #solidedge Visa mindre

Analyst Air Suspension

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect ma... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
Role description

As a creative and skilled Analyst within the Air Suspension team you are Volvos GTTs innovation foundation.
By sharing your knowledge and providing exceptional customer service you will contribute to our end-customer’s needs and assist Volvo in maintaining strong relationships with our customers. You will be a big part of our success.
You will be part of a dynamic team with unique individuals who are dedicated to delivering safe and assured experiences and products for our customers in a timely manner.
We as a team are responsible for development of front and rear air suspensions, single axle suspensions and complete bogie systems, and we develop the future technologies and solutions for all brands within the truck group.
The team is involved in complete vehicle projects, component projects and advanced engineering research within the group’s area. 

This is what you will do

Your undertaking with key technology solutions will create long-term relationships with both our customers and suppliers built on trust and engagement. Within your area of responsibility, you are expected to be involved in the design work, proactively influence the product design, ensue and utilize the admitted work processes and of course ensure a good product quality. You are also expected to maintain a good collaboration with cross-functional teams, including Production, Purchasing, Aftermarket, Project management, and many more.
We believe you have high knowledge in dealing with design and development problems and strong intuitive and analytic ability to resolve problem issues.
As the rest of the team, you should have an open, flexible, and positive attitude. You are target oriented and able to work with limited supervision. Together with good ability to communicate and to work with people at different level, the network is broad both inside and outside the company.
As an Analyst within the Air Suspension area you will be subject to exciting challenges but also rewarding career opportunities. We encourage people who inspire innovative solutions, and we firmly believe that passion for the products creates amazing customer experiences.

Who are you?

We believe that to be successful in this position you should have a background in product development within the area of stress simulations, fatigue and durability analysis of vehicle suspensions and steering systems. Proficiency in using software’s like Altair Hyperworks, Abaqus and Nastran is essential. Knowledge and experience of other simulation and optimization software’s is an advantage.
A strong foundation in suspension geometry and an understanding of load paths, vehicle behavior and handling dynamics are key attributes for success in this position.
We expect you to work closely together with the Design Engineers and taking an active part of developing the best Heavy-Duty suspension in the world.
Experience in executing prototype builds at the vehicle level is a preferred, showing your practical skills. Additionally, practical experience gained from workshops, is highly valued, contributing a hands-on dimension.
You are expected to bring expertise in Life Cycle Assessment (LCA) and design practices that align with principles of sustainability, circular economy, and recycling. This commitment to environmentally conscious design underscores the holistic approach expected in this role.
In terms of project management, you should demonstrate experience in agile product development methodologies and proficiency in using the JIRA.
In summary, you will possess a well-rounded background, combining technical proficiency with practical experience and a dedication to sustainable design principles.

Profile & qualifications

•    Bachelor's or Master's degree in mechanical engineering or similar.
•    Several years of experience in product development, strength-, fatigue- and durability analysis.
•    Experience from the automotive industry.
•    Good knowledge in pre- and post-processing software's as Altair Hyperworks and Beta CAE. 
•    Good knowledge in solvers like Abaqus, Nastran or nCode DesignLife.
•    Good knowledge in English, both written and spoken is essential.
•    Knowledge and experience of software's like Optistruct and Magma Soft are an advantage.

Questions? Please contact Johan Samson for further information.
Johan Samson, [email protected] Group Manager, Air Suspension. Applications will be evaluated continuously, do not wait to apply. Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Mechanical Design Engineer - Busbars for HV Distribution parts

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." El... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Electromobility is changing the automotive world, and we are now looking for you who want to be part of this change happening in our industry! The Electromobility organization is responsible for the complete development lifecycle of our electric powertrains – from advanced engineering through product development into the maintenance phase. Together we drive the transition from conventional powertrains to electromobility based on cutting-edge engineering, state-of-the-art research, and well-proven technology within the Volvo Group. By joining us, you’ll be part of a global and diverse team of highly skilled professionals who work with passion, trust each other, and embrace change to stay ahead. We make our customers win.? 
About the role?
Do you want to work with entirely new technology at the forefront of electromobility? As a Mechanical Design Engineer – HV Distribution parts, you will work together with your team – give energy and lend a helping hand with your solid experience when needed. You will be part of a team that is developing/designing the next generation of High Voltage Junction boxes.??  
As Design engineer you will also:? 
* Drive the design of different design areas within the High voltage Junction boxes, in particular on busbars and thermal insulation materials.? 
* Come up with innovative design ideas that makes our hardware more cost effective and efficient.?
* ?You will have close cooperation with colleagues within the electromobility team and with other departments within Volvo Group Trucks Technology and other business areas. 
* Work cross functional with both internal and external teams, i.e production, suppliers etc.? 

We are looking for…? 
… a solution and innovation-oriented team player with the ability to make decisions based on facts and engineering judgment. You are confident – believe in your ability and influence others to do the same. You're the one who always looks for opportunities and welcomes new ways of doing things. You like problem solving and you get motivated by the fast pace that is currently in the Electromobility field.? 
With your innovative design ideas, we want you to send in your application today. Come and take the opportunity to work with the coolest technical challenges in an encouraging environment. Join our exciting change journey today!? 

Requirements:?? 
* You have an BSc degree in Mechanical Engineering, Mechatronics engineering, or Physics 
* At least 5 years of experience in product design in automotive industry??? 
* Technical knowledge in the Electromobility products, systems and components???? 
* Skills in CAD Design (Creo meriting), 2D drawings, and tolerance stack analysis? 
* Fluent in both written and verbal English 
Experience in design of high and low voltage distribution boxes.

For this role, we are searching for a person with specific experience within the areas of busbars and thermal interface materials, meriting experience with sheet metal and/or casting. Visa mindre

Testingenjör till ett ledande företag inom fordonsbranschen!

Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt. Information om tjänsten Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult. Vår grupp, Transmission Verif... Visa mer
Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt.

Information om tjänsten
Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult.

Vår grupp, Transmission Verification, består av 16 högkvalificerade och passionerade kollegor som arbetar i olika roller. Vi testar våra världsklassväxellådor för både elektriska och konventionella drivlinor, och pressar dem till gränsen och bortom. Vi arbetar med alla typer av fysisk verifiering, från komponentnivå till kompletta fordon och NVH, för både elektrisk och konventionell framdrift. I gruppen finns både nyfikna datautvärderingsnördar och pragmatiska, uppfinningsrika praktiker. Vi vill göra en skillnad genom att vara där för våra kollegor och kunder genom att säkerställa pålitliga, säkra och tysta produkter.

Den här rekryteringsprocessen hanteras av Professionals Nord och önskemålet är att alla frågor kring tjänsten går till [email protected]

Arbetsuppgifter
Som testingenjör kommer du att fokusera på mekatronisk växellådsverifiering för en mängd fordon inom fordonsbranschens ledande företag. Ditt huvudansvar i teamet är att genomföra olika verifieringsaktiviteter, särskilt på växellådans systemnivå i testcellen. Du kommer att hantera hårdvarutestning med kontakt mot mjukvaran och ansvara för planering, dagliga arbetsuppgifter, kommunikation och dokumentation, samarbetande med kollegor och intressenter.

Det förväntas att du har en förmåga att planera provning för att maximera utnyttjandet av provrummet och utrustningen och snabbt identifiera och lösa problem med provobjekt eller utrustning. Vidare har du förmåga att dela kunskap inom gruppen och med andra testingenjörer och en analytisk förmåga att kunna göra en första analys av provresultaten.

Vi söker dig som

• Har en kandidatexamen och/ eller masterexamen inom Automation, Mekatronik, Mekanik, Maskin eller motsvarande. 
• Det är även meriterande om du har erfarenhet av relevanta verktyg för både mätning och datavärdering samt innehar körkort för lastbil.

Dina personliga egenskaper är avgörande för hur väl du kommer trivas i rollen. Som person är du en lagspelare med en positiv attityd och serviceinriktning. Du är flexibel och kan snabbt byta fokus och anpassa dig till nya arbetsuppgifter. Du är snabblärd och har ett genuint intresse av att lära dig nya teknologier och provningsmetoder.

START: April 
OMFATTNING: Heltid
STAD: Göteborg
URVAL: Sker löpande
KONTAKT: Adrian Couture 

Sök tjänsten nedan genom att fylla i din information samt bifoga dokument. Logga gärna vidare in på "Mina sidor" efter att du bekräftat ditt konto, här kan du skapa din kandidatprofil vilket utökar din chans till drömjobbet! Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på [email protected]

#provingenjör #testingenjör #tekniker #provning #automation #mekatronik Visa mindre

1st Analysis Wind Noise Engineer

Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

What do we offer?

We have bold targets when it comes to customer satisfaction, innovation and change in the automotive industry and to make this happen, we need talented people on board. People with passion, energy, and a commitment to customer satisfaction. People that want to be part of Volvo’s journey in revolutionizing the industry. 

We are looking for a 1st Analysis Wind Noise Engineer with testing experience and aeroacoustics background to join the Wind Noise Team within Engineering at Volvo Cars.

The 1st Analysis Wind Noise Team is part of the Driving Experience department within Engineering at Volvo Cars Headquarters in Gothenburg. The Driving Experience department supports the strategic direction of “For life. Freedom to move in a Personal, Sustainable and Safe way.” We organise competence in dynamic attributes such as vehicle dynamics, body structure dynamics, road noise, wind noise, propulsion NVH, climate & thermal NVH, solidity, component NVH and active sound experience. In close collaboration with the design and release teams we take responsibility for a great driving experience for our end users.

You will get the opportunity to be involved in all project phases, from Advanced Engineering to production start, and with field and quality issues, contributing with analysis and guidelines to improve our attributes in our cars. You will get a varying role where you work with both testing in our wind tunnel and at external facilities, as well as performing CAE simulations. This is an opportunity to contribute to creating the world’s most inspired and confident driving experience. We can offer state-of-the-art equipment and test facilities and the opportunity to build an extensive network with other internal design areas, suppliers, and our development center in Shanghai.

As part of the role, it will be necessary at times to travel to our locations mostly in Europe, but also in the USA and in China to work with the teams based there. 
What you’ll do 

As 1st Analysis Wind Noise Engineer, you will support the delivery of wind noise attribute through a combination of testing, CAE and engineering judgement. You will perform full-size clay model and complete vehicle testing during concept and prototype verification phases, as well as support greenhouse wind noise simulations. You will support in the requirement setting, communicate analysis results and guide the design work from a wind noise perspective. You will also work closely with the exterior design department to understand and give technical input in early concepts phases. You will participate in the development of improved or new methods and measurement capabilities. Some of your responsibilities will be to lead assignments dependent on your experience and knowledge. 

You and your skills

We see that you have a MSc or PhD in mechanical engineering, technical acoustics, engineering physics or similar and that you have a solid understanding of acoustics and aeroacoustics. You have proven experience with data acquisition and DSP (Digital Signal Processing). Background or interest in developing CAE skills is a plus.

Understanding of the importance of wind noise in the overall refinement of electric and autonomous vehicles will be highly valued in this role. Beneficial is also academic projects and research in the field of aeroacoustics as well as knowledge of design principles of critical wind noise systems (body, closures, sealing systems and styling).

On a personal level, you are an outspoken and brave person known for your ability to synthesize data, transforming complex analysis into simple and effective recommendations. You are customer-focused and results-oriented with a sense of timing. You possess good interpersonal and communication skills and are comfortable to present and discuss results at different fora and levels. You are a team player with a sense of accountability, also comfortable working independently.
Required qualifications:
* MSc or PhD within related engineering areas, preferably with a specialization in acoustics, or equivalent work experience.
* Experience within automotive NVH is needed.
* Experience from product development in the automotive industry is meritorious.
* Driver’s license (B-level).
* Fluent in English (written and spoken). Visa mindre

Electronics / Mechatronics Engineer Within Automotive

WHO WE ARE LOOKING FOR You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!   The personal qualities that we value are the ability to solve problems... Visa mer
WHO WE ARE LOOKING FOR

You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!

 

The personal qualities that we value are the ability to solve problems with an energetic touch, someone who is genuinely interested in technology and, in that way, create confidence to build long lasting relationships with our world leading automotive manufacturer partners!

 

WHAT WE OFFER YOU

At ALTEN, every individual is equally valuable in building tomorrow’s world today. We meet future challenges by supporting our clients’ projects and enabling our people to reach their full potential. We do so by offering technological challenges, fulfilling opportunities, inspiring togetherness and the possibility to contribute to a sustainable future.

 

We are convinced that your development is driven by your passion. By being active in several different industries, we can offer a wide range of assignments and an opportunity to influence both the world around you and your own development.  With a coaching leadership, our leaders will guide you in the right direction. We also offer personalized training opportunities through your individual training budget, which you can use in our internal ALTEN Academy or on external courses.

 

At ALTEN, there are numerous opportunities to join an inspiring togetherness and do what you enjoy, together with your colleagues. During our Tech Weeks you get to hear what your colleagues are working on and a chance to share your own experiences. We have several internal networks, such as ALTEN Sports and Women@ALTEN, where you are given the opportunity to get active with your colleagues or pursue issues and topics that you are passionate about.

 

At ALTEN, we think it's important to have a balance between work and spare time, which is why we offer three extra days off a year. We have a collective agreement and offer benefits like pension, insurances and wellness grants.

.

 

TYPE OF RESPONSIBILITIES:
Initiate and develop design and systems concepts to meet project objectives
Develop the product in collaboration with suppliers and customers
Coordinate cross-functional work to ensure product quality, delivery, product cost and smooth integration of systems
Create, modify, and release product documentation
Analyze and troubleshoot issues related to the systems and propose solutions
Secure testing and validation of the system to ensure compliance with industry standards



REQUIREMENTS:
Bachelor's or Master's degree in Electrical, Mechatronics or Mechanical Engineering
3-5+ years of relevant experience in the automotive industry
Technical requirements and specifications
Experience in mechatronic system design
Strong communication and teamwork skills
Fluent in written and spoken English - Swedish is meritorious

 

ABOUT ALTEN

ALTEN is one of Europe’s largest consulting companies within Engineering, IT and Life Sciences with over 54,000 employees in more than 30 countries. We’re a global actor with a local presence with 1400 committed colleagues in offices from Lund in the south to Skellefteå in the north. Our engineers carry out complex and highly technical projects throughout the product development chain of the most prestigious companies in sectors such as Automotive, Aerospace & Defense, Energy, Manufacturing, Public Sector and Life Sciences.

 

For four years in a row, ALTEN has been named one of Sweden's most attractive employers by Karriärföretagen, an award for employers that offer unique career and development opportunities.

 

WE BELIEVE IN GROWING TOGETHER! Visa mindre

Design Engineer CEIP

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Group Trucks Techn... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
What you will do
Do you want to be a part of creating our future? The biggest technology shift in transport solutions in decades has started, and we at GTT want to stay in the forefront together with our customers.  We are happy to announce that we now are hiring a Design Engineer in our Electrical Installation & Pneumatic Front area. No matter what fuels your passion we are sure you will find a challenging future with us! We offer you a chance to be involved in defining future solutions within the transport industry, along with a highly motivated and inspiring team of colleagues. If you are ready to take on a new challenge and explore new ways of driving business, then we are confident you will fit right in.

The Chassis Electrical Installation & Pneumatic Front team in Gothenburg, is responsible for the design and the development of installation and components for Chassis electrical (signal and high voltage) brake systems, air suspension systems and extra equipment. The development includes design, planning, documentation, validation and verification of pneumatic installation. Our work is carried out in all stages of product development: complete vehicle projects, product maintenance and component projects. The work is performed in close co-operation with both internal and external contacts, in a multi-cultural environment, such as our different development sites and suppliers around the world.

Your future team consists of a group of 20 engineers with mixed experience and skillset. To us team spirit is about knowledge sharing, thus supporting and helping each other is therefore of high value. We work hard, but always have a positive, cheerful and inclusive atmosphere.
Tasks and responsibilities
In this role you will work as a Design Engineer with responsibility for Component and Quality work as well as new development in projects related to Electrical and Pneumatic installations.
The main design work tool you will be using is KOLA (Volvos main documentation system).
Included in your tasks  will also be working with other data systems and documentations in order to present to a cross functional team including purchasing, production, Feature Verification & Validation, aftermarket etc. You will also lead and delegate work to other external colleagues and stakeholders as well as cooperating with our sites in India and Brazil.

Who are you?
We believe you are a person with an open multi-brand and multi-cultural mindset, with a strong business and customer orientation. With the help of your analytical skills and your openness for change you will be able to identify areas of improvements. This, combined with your high interest in technology development will enable you to make strategic product changes to further enhance our products.

Further we see that you are someone who takes the initiative, demonstrate confidence in your abilities and adapt well to a fast paced environment. You deal constructively with problems that do not have clear solutions or outcomes. You work structured and analytical and are able to prioritize your work and handle multiple things. You take on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm.
 You have a positive outlook on life, and a strong ability to create smooth and lasting relations and networks with the people you work with.

We see that you have the following knowledge and experience:
•    University degree in Mechanical, Mechatronics or equivalent
•    Minimum 5 -10 years of engineering experience within the area of sheet metal engineering and/or plastic engineering
•    Proficient in CAD (CREO) and PDM systems
•    Good automotive knowledge, truck knowledge is a merit
•    Good knowledge of manufacturing processes
•    Good knowledge of Develop concept and Develop and Document Technical solution processes
•    Good knowledge of the engineering tools and verification processes/methods in this design area 

For further information please contact:
Group Manager, El Installation & Pneumatics Front, Arnkil Minna [email protected]
We value your data privacy and therefore do not accept applications via mail. Visa mindre

Vehicle Support Engineer

Ansök    Feb 12    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Software Download/Vehicle Support Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different ind... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Software Download/Vehicle Support Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-03-15. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
We are now looking for a Software Download/Vehicle Support Engineer, EE Your main tasks as an SWDL/vehicle support engineer is to support the vehicle fleet with fault tracing and SWDL. You will also support early phase EE engineering, software downloading/programming and parameter setting of ECUs, trouble shooting of complex problems in lab/rig and truck environment. The role includes a considerable amount of work in different facilities both inside and outside office / workshops and includes hands-on work on trucks. When working at EE implementation support you will have the opportunity to travel and meet both dealers and end users.

Qualifications
Qualifications:
Experience from working with electrical and electronics in vehicles and also have a good understanding of vehicle electrical architecture
Preferable you have a complete truck knowledge and with the complete vehicle perspective to be able to understand the product as an end user
Knowledge in CANalyser, Kola, Protus, PROTOM,Configurator, SE-Tool and ClearQuest is considered meritorious
We consider experience from product development a merit

As a person, you are driven, innovative and you have a strong customer focus and a service minded attitude. We believe that you have the ability to work independently and take initiatives. It is important to be proactive! You are also good at problem analysis and have a problem solving oriented mindset. You have a structured way of working and the flexibility to work with a wide range of tasks. You enjoy teamwork, contribute with team spirit and you like taking responsibility.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Test Engineer

Ansök    Feb 12    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Test Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineer... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Test Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-02-15. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
We are looking for a Test Engineer to strengthen our team within the field test department. In this position you will have a close contact with the end customers, who performs tests for us in our test vehicles. These tests can vary from component test up to complete vehicle level. The relationship with the costumer plays an important role in this position. You will be in close contact within the internal organization for different tasks around the test vehicles. You will secure that the test trucks are updated with the latest hardware and software. You will analyze result and report issues from the tests to respective technology area. You will collect information from the logging systems in the vehicles. Interviewing the customers for feedback, is an important part in order to validate the new products.

Qualifications
Qualifications:
Relevant experience (testing).
Knowledge in software and electric architecture is a plus
Truck knowledge is a plus (C/CE card). Knowledge in software and electric architecture is a plus

As a person you have an analytic ability and an optimistic mindset for problem solving of both the test and test vehicle. Our work environment is changing continuously, and you adapt easily to these daily changes. You are a team player with a humble profile without prestige. Even if the team works together you will manage to work structured and independently as well. You have good communication skills, are structured and skilled in reporting both in written text and verbally in both English and Swedish.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Mechanical Supervisor

Jobbify är en jobbplattform för vassa kandidater. För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen: Nipromec Oy Ltd is an international consulting and engineering company founded in 2003. We offer design and consulting services for multiple industries with emphasis on energy and construction. Nipromec offices in Finland are located in Rauma, Turku, Tampere an... Visa mer
Jobbify är en jobbplattform för vassa kandidater.
För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen:

Nipromec Oy Ltd is an international consulting and engineering company founded in 2003. We offer design and consulting services for multiple industries with emphasis on energy and construction. Nipromec offices in Finland are located in Rauma, Turku, Tampere and Helsinki. Group has offices also in Malmö in Sweden, Erlangen in Germany, Bristol and London in United Kingdom.

We are now looking for a MECHANICAL SUPERVISOR for a project in Gothenburg. Duration of the project: September/October 2024 - July/October 2025.

Main tasks include:

To supervise that the mechanical installations are carried out in accordance with the instructions, safely and on schedule, taking into account the quality and cost targets.

Attends meetings with Customer and Subcontractors as required.

Support the Site Manager with work coordination between the client and the end client and all subcontractors.

To supervise the mechanical installation related to Equipment and Ducting.

To prepare the Weekly Report and the Monthly report together with Site Manager.


We expect:



In-depth knowledge of boiler systems, mechanical equipment and standards

Excellent organizational and problem-solving abilities

Commitment to safety and environmental compliance







We are looking for:

Very good level of English (spoken and written), Swedish is a plus

Proven experience as a Mechanical Supervisor in a boiler plant or similar industrial setting

Bachelor's degree in Mechanical Engineering or a related field


For more information please contact Nipromec Group HR Coordinator Viliina Salminen, tel. +358504648350.

The position will be filled as soon as suitable candidate is found, so apply this position immediately. Please note that by applying you agree that your data is handled according to our recruitment register procedure.

Finnish Nipromec Group consists of Nipromec Oy Ltd, Nipromec UK Ltd, N-Pro Resources Oy Ltd, Nipromec GmbH, Nipromec Sweden Ab, Nipromec EP and Nipromec Site Services units. Nipromec Group is audited and certified by Bureau Veritas and holds the ISO 9001/14001 and ISO 45001 certificates. 2022 Nipromec Group turnover was 22 million Euros. For more information please visit www.nipromec.com Visa mindre

Mekanikkonstruktör till AFRY!

Har du en utbildning inom mekanik och vill bredda din kunskaper? Vi söker dig som är utbildad maskiningenjör eller har jobbat med mekanik och vill ta nästa steg i karriären i rollen som mekanikkonstruktör hos AFRY. Välkommen in med din ansökan, löpande urval! Information om tjänsten Professionals Nord söker nu för AFRYs räkning dig som har någon form av mekanikutbildning och är nyfiken att ta nästa steg i karriären hos AFRY. I rollen som mekanikkonstruktö... Visa mer
Har du en utbildning inom mekanik och vill bredda din kunskaper? Vi söker dig som är utbildad maskiningenjör eller har jobbat med mekanik och vill ta nästa steg i karriären i rollen som mekanikkonstruktör hos AFRY. Välkommen in med din ansökan, löpande urval!

Information om tjänsten
Professionals Nord söker nu för AFRYs räkning dig som har någon form av mekanikutbildning och är nyfiken att ta nästa steg i karriären hos AFRY. I rollen som mekanikkonstruktör hos AFRY kommer du vara verksam inom olika produktgrupper där allt arbete sker i projektform. Dina arbetsuppgifter kommer bland annat vara att:

• I ett störningsfritt utförande, bygga in elektronik i de olika produkterna.
• Arbeta i CAD med att rita elboxar, komponenterna i dem samt förbindelserna mellan dem

Du arbetar även med dokumentation och prototypframtagning som sker i 3d-printer i deras egen labbmiljö. Rollen innebär en tät kontakt och samarbete med övriga kompetensområden såsom mekanik, elektronik och elsystem.

Vi söker dig som:
Har en eftergymnasial utbildning med inriktning mot mekanikkonstruktion. Du har erfarenhet i något av de olika CAD-verktygen, vilket av dem är inte det viktigaste. Vidare har du god kunskap i svenska och engelska i såväl tal som skrift.

Vi tror att dina personliga egenskaper är avgörande för hur väl du kommer att trivas i rollen som mekanikkonstruktör hos AFRY långsiktigt. Vi söker därför dig som har rätt inställning, driv och motivation för att briljera i din nya tjänst. Du har ett stort tekniskt intresse och ett personligt engagemang i ditt arbete. Vidare är du lösningsorienterad, metodisk och noggrann. Du har viljan att utmana dig själv, tar eget ansvar för din kompetensutveckling och du finner det tillfredställelse att aktivt bidra till företagets utveckling.

START: Enligt överenskommelse
OMFATTNING: Heltid
STAD: Karlskoga
URVAL: Sker löpande
ANSVARIG: Mia Haaster

Sök tjänsten genom att klicka på "sök jobbet" nedan. Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på [email protected]

#CAD #konstruktion #mekanik #elmek #AFRY #el #maskinteknik #maskiningenjör #mekanikkonstruktion #mekanikkontruktör #mechanicalengineering #fordonsel #solidedge Visa mindre

Machine Learning Engineer

Ansök    Feb 9    Randstad AB    Civilingenjör, maskin
Job description As a Machine Learning Engineer–Vehicle Controls, working in Vehicle Controls department, you will be part of a scrum team that is responsible for software development from early concept phase to industrialization phase. You use your skills and your passion to expand your technical insights and to build and maintain a network that includes people from many areas in the company. You are curious and want to contribute to develop our technologi... Visa mer
Job description
As a Machine Learning Engineer–Vehicle Controls, working in Vehicle Controls department, you will be part of a scrum team that is responsible for software development from early concept phase to industrialization phase.
You use your skills and your passion to expand your technical insights and to build and maintain a network that includes people from many areas in the company. You are curious and want to contribute to develop our technologies. Driven by customer focus you get things done. You are committed to deliver high quality and you have the ability to proceed your work without having all facts at hand before you start. You are flexible and have excellent communication and documentation skills. You have a positive attitude and are a team player. You are experienced with Agile development and familiar with software development best practices.
This is a consultant assignment where you will be employed by Randstad Technologies.

Responsibilities
• Develop and train Machine Learning (ML) models to predict EV Energy Consumption, Battery Degradation, Charging Strategy, Driving Behaviors, etc.
• Process and prepare data for ML model training and verification.
• Deploy ML models into production and ensure their operational efficiency at scale.
• Monitor and update the ML models to increase their accuracy.
• Stay up-to-date with the latest developments in ML algorithms and architectures.

Qualifications
• Master’s or PhD in relevant fields such as Data Science, Statistical Analysis, Machine Learning, Computer Science, or Mathematics
• Minimum 3 years of Professional Work Experience in Similar Roles
• Domain Knowledge in Electric Vehicles, Battery Technology, and EV Energy Management
• Proficiency in Programming Languages such as Python, R, or similar languages used for Data Analysis and Machine Learning
• Experience in Model Deployment Tools and Techniques
• Experience in using Machine Learning libraries such as TensorFlow & PyTorch
• Fluent in English (spoken and written)
• Experience from agile way of working, Git, JIRA are meritorious
• Driver license (level B) is meritorious

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Electronics / Mechatronics Engineer Within Automotive

WHO WE ARE LOOKING FOR You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!   The personal qualities that we value are the ability to solve problems... Visa mer
WHO WE ARE LOOKING FOR

You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!

 

The personal qualities that we value are the ability to solve problems with an energetic touch, someone who is genuinely interested in technology and, in that way, create confidence to build long lasting relationships with our world leading automotive manufacturer partners!

 

WHAT WE OFFER YOU

At ALTEN, every individual is equally valuable in building tomorrow’s world today. We meet future challenges by supporting our clients’ projects and enabling our people to reach their full potential. We do so by offering technological challenges, fulfilling opportunities, inspiring togetherness and the possibility to contribute to a sustainable future.

 

We are convinced that your development is driven by your passion. By being active in several different industries, we can offer a wide range of assignments and an opportunity to influence both the world around you and your own development.  With a coaching leadership, our leaders will guide you in the right direction. We also offer personalized training opportunities through your individual training budget, which you can use in our internal ALTEN Academy or on external courses.

 

At ALTEN, there are numerous opportunities to join an inspiring togetherness and do what you enjoy, together with your colleagues. During our Tech Weeks you get to hear what your colleagues are working on and a chance to share your own experiences. We have several internal networks, such as ALTEN Sports and Women@ALTEN, where you are given the opportunity to get active with your colleagues or pursue issues and topics that you are passionate about.

 

At ALTEN, we think it's important to have a balance between work and spare time, which is why we offer three extra days off a year. We have a collective agreement and offer benefits like pension, insurances and wellness grants.

.

 

TYPE OF RESPONSIBILITIES:
Initiate and develop design and systems concepts to meet project objectives
Develop the product in collaboration with suppliers and customers
Coordinate cross-functional work to ensure product quality, delivery, product cost and smooth integration of systems
Create, modify, and release product documentation
Analyze and troubleshoot issues related to the systems and propose solutions
Secure testing and validation of the system to ensure compliance with industry standards



REQUIREMENTS:
Bachelor's or Master's degree in Electrical, Mechatronics or Mechanical Engineering
3-5+ years of relevant experience in the automotive industry
Technical requirements and specifications
Experience in mechatronic system design
Strong communication and teamwork skills
Fluent in written and spoken English - Swedish is meritorious

 

ABOUT ALTEN

ALTEN is one of Europe’s largest consulting companies within Engineering, IT and Life Sciences with over 54,000 employees in more than 30 countries. We’re a global actor with a local presence with 1400 committed colleagues in offices from Lund in the south to Skellefteå in the north. Our engineers carry out complex and highly technical projects throughout the product development chain of the most prestigious companies in sectors such as Automotive, Aerospace & Defense, Energy, Manufacturing, Public Sector and Life Sciences.

 

For four years in a row, ALTEN has been named one of Sweden's most attractive employers by Karriärföretagen, an award for employers that offer unique career and development opportunities.

 

WE BELIEVE IN GROWING TOGETHER! Visa mindre

Design Engineer, Aerospace

Together Tech creates innovative products and digital solutions. We believe in creating a dynamic workplace and encourage our engineers and developers to combine the strong technical knowledge with the desire to push boundaries of technology for creating a more sustainable future. We are now looking for an experienced design engineer for an assignment in a highly topical area, space and satellites. ???? The main purpose for you will be to develop the mech... Visa mer
Together Tech creates innovative products and digital solutions. We believe in creating a dynamic workplace and encourage our engineers and developers to combine the strong technical knowledge with the desire to push boundaries of technology for creating a more sustainable future.

We are now looking for an experienced design engineer for an assignment in a highly topical area, space and satellites. ???? The main purpose for you will be to develop the mechanical design and perform the configuration control of projects related to antennas, space computers and microwave units.

Your technical bakgrund

- Bachelor or Master degree within Mechanical engineering

- Experienced in mechanical designs in Creo, 2D and 3D Siemens NX CAD system, and in Teamcenter PLM

- You have prior experience in product development, design, and technical documentation

- Good command of written and spoken Swedish and English, professionally

Your personal characteristics
Being a consultant puts extra light on having a flexible and curious mindset, a self-reliant way of working and your capability to build strong relationships with customers and colleagues, while keeping track of the target picture. You stay current with industry trends and emerging technologies and are motivated to develop together with us.

Together Tech for sustainability
We provide opportunities for development through a variety of assignments in different industries, whether it be client projects or in one of our exciting in-house projects. At Together Tech, you work together with other engineers who are passionate about the environment and sustainability, all with a desire to create lasting solutions using technology - or as we say: Better World Tech!

Your development & our support????

Your development and well-being are important to us, and Together Tech offers benefits that support you and your career in the best way. We value the importance of secure employment and fixed salary, and we have a collective agreement. We prioritize your health and provide a wellness allowance of 4000 SEK per year. Moreover, we offer health check-ups, contributions to activities, and wellness discounts.

We enjoy spending time together through various social activities and team-building activities suitable for everyone! From after-works and sport activities to pentathlons and corporate conferences. Our commitment is to give you great conditions to grow through various assignments and projects as well as individual development plans. We also offer courses in sustainability and other courses within the framework of your role and goals. We take pride in being recognized as one of Sweden's most attractive employers in 2024! ????

Learn more about us at www.togethertech.com. (http://www.togethertech.com/)

For questions regarding the position, please contact Marko Koivumäki (mailto:[email protected]), Business Unit Manager Mechanical Engineering Visa mindre

Elektronik- / mekatronikingenjör inom fordonsindustrin

VEM VI SÖKER Du bör ha en bred kunskap och erfarenhet av att utveckla elektronik och skriva tekniska krav. Du känner dig bekväm med att äga och ta ansvar för dina komponenter och gör det proaktivt och är snabblärd. Du har rätt attityd när du ställs inför nya frågeställningar. Du är nyfiken, positiv, proaktiv och vill arbeta i fordonsbranschen!   De personliga egenskaper som vi värdesätter är förmågan att lösa problem med en energisk touch, någon som är ... Visa mer
VEM VI SÖKER

Du bör ha en bred kunskap och erfarenhet av att utveckla elektronik och skriva tekniska krav. Du känner dig bekväm med att äga och ta ansvar för dina komponenter och gör det proaktivt och är snabblärd. Du har rätt attityd när du ställs inför nya frågeställningar. Du är nyfiken, positiv, proaktiv och vill arbeta i fordonsbranschen!

 

De personliga egenskaper som vi värdesätter är förmågan att lösa problem med en energisk touch, någon som är genuint intresserad av teknik och på så sätt skapar förtroende för att bygga långvariga relationer med våra världsledande partners inom fordonstillverkning!

 

VAD VI ERBJUDER DIG

På ALTEN är varje individ lika värdefull för att bygga morgondagens värld idag. Vi möter framtida utmaningar genom att stödja våra kunders projekt och göra det möjligt för våra medarbetare att nå sin fulla potential. Vi gör det genom att erbjuda tekniska utmaningar, utvecklande möjligheter, inspirerande samhörighet och möjligheten att bidra till en hållbar framtid.

 

Vi är övertygade om att din utveckling drivs av din passion. Genom att vara verksamma i flera olika branscher kan vi erbjuda ett brett spektrum av uppdrag och en möjlighet att påverka både din omvärld och din egen utveckling. Med ett coachande ledarskap kommer våra ledare att guida dig i rätt riktning. Vi erbjuder även personliga utbildningsmöjligheter genom din individuella utbildningsbudget, som du kan använda i vår interna ALTEN Academy eller på externa kurser.

 

På ALTEN finns det många möjligheter att delta i en inspirerande gemenskap och göra det du tycker är roligt, tillsammans med dina kollegor. Under våra Tech Weeks får du höra vad dina kollegor arbetar med och en chans att dela med dig av dina egna erfarenheter. Vi har flera interna nätverk, såsom ALTEN Sports och Women@ALTEN, där du ges möjlighet att bli aktiv tillsammans med dina kollegor eller driva frågor och ämnen som du brinner för.

 

På ALTEN tycker vi att det är viktigt att ha en balans mellan arbete och fritid, därför erbjuder vi tre extra lediga dagar per år. Vi har kollektivavtal och erbjuder förmåner som pension, försäkringar och friskvårdsbidrag.

 

EXEMPEL PÅ ANSVARSOMRÅDEN:
Initiera och utveckla design- och systemkoncept för att uppfylla projektmålen
Utveckla produkten i samarbete med leverantörer och kunder
Samordna tvärfunktionellt arbete för att säkerställa produktkvalitet, leverans, produktkostnad och smidig integration av system
Skapa, modifiera och publicera produktdokumentation
Analysera och felsöka problem relaterade till systemen och föreslå lösningar
Säkerställa testning och validering av systemet för att säkerställa överensstämmelse med branschstandarder



KVALIFIKATIONER: 
Kandidatexamen eller magisterexamen i elektroteknik, mekatronik eller maskinteknik
3-5+ års relevant erfarenhet från fordonsindustrin
Tekniska krav och specifikationer
Erfarenhet av mekatronisk systemdesign
God kommunikations- och samarbetsförmåga
Flytande engelska i tal och skrift - svenska är meriterande

OM ALTEN

ALTEN är ett av Europas största konsultföretag inom Engineering, IT och Life Sciences med över 54 000 medarbetare i mer än 30 länder. Vi är en global aktör med lokal närvaro med 1400 engagerade kollegor på kontor från Lund i söder till Skellefteå i norr. Våra ingenjörer genomför komplexa och mycket tekniska projekt i hela produktutvecklingskedjan hos de mest prestigefyllda företagen inom sektorer som Automotive, Aerospace & Defense, Energy, Manufacturing, Public Sector och Life Sciences.

 

ALTEN har fyra år i rad utsetts till en av Sveriges mest attraktiva arbetsgivare av Karriärföretagen, en utmärkelse för arbetsgivare som erbjuder unika karriär- och utvecklingsmöjligheter.

 

VI TROR PÅ ATT VÄXA TILLSAMMANS! Visa mindre

Testingenjör till ett ledande företag inom fordonsbranschen!

Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt. Information om tjänsten Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult. Vår grupp, Transmission Verif... Visa mer
Är du en engagerad och kompetent Tekniker som är redo att ta ansvar som testingenjör hos ett världsledande företag inom fordonsbranschen? Hos vår kund kommer du att spela en viktig roll i att säkerställa att deras prövningsprocesser genomförs korrekt och att resultaten mäts på rätt sätt.

Information om tjänsten
Uppdraget är en del av vår personaluthyrning. Du kommer vara anställd av Professionals Nord och arbeta som konsult.

Vår grupp, Transmission Verification, består av 16 högkvalificerade och passionerade kollegor som arbetar i olika roller. Vi testar våra världsklassväxellådor för både elektriska och konventionella drivlinor, och pressar dem till gränsen och bortom. Vi arbetar med alla typer av fysisk verifiering, från komponentnivå till kompletta fordon och NVH, för både elektrisk och konventionell framdrift. I gruppen finns både nyfikna datautvärderingsnördar och pragmatiska, uppfinningsrika praktiker. Vi vill göra en skillnad genom att vara där för våra kollegor och kunder genom att säkerställa pålitliga, säkra och tysta produkter.

Den här rekryteringsprocessen hanteras av Professionals Nord och önskemålet är att alla frågor kring tjänsten går till [email protected]

Arbetsuppgifter
Som testingenjör kommer du att fokusera på mekatronisk växellådsverifiering för en mängd fordon inom fordonsbranschens ledande företag. Ditt huvudansvar i teamet är att genomföra olika verifieringsaktiviteter, särskilt på växellådans systemnivå i testcellen. Du kommer att hantera hårdvarutestning med kontakt mot mjukvaran och ansvara för planering, dagliga arbetsuppgifter, kommunikation och dokumentation, samarbetande med kollegor och intressenter.

Det förväntas att du har en förmåga att planera provning för att maximera utnyttjandet av provrummet och utrustningen och snabbt identifiera och lösa problem med provobjekt eller utrustning. Vidare har du förmåga att dela kunskap inom gruppen och med andra testingenjörer och en analytisk förmåga att kunna göra en första analys av provresultaten.

Vi söker dig som

• Har en kandidatexamen och/ eller masterexamen inom Automation, Mekatronik, Mekanik, Maskin eller motsvarande. 
• Det är även meriterande om du har erfarenhet av relevanta verktyg för både mätning och datavärdering samt innehar körkort för lastbil.

Dina personliga egenskaper är avgörande för hur väl du kommer trivas i rollen. Som person är du en lagspelare med en positiv attityd och serviceinriktning. Du är flexibel och kan snabbt byta fokus och anpassa dig till nya arbetsuppgifter. Du är snabblärd och har ett genuint intresse av att lära dig nya teknologier och provningsmetoder.

START: April 
OMFATTNING: Heltid
STAD: Göteborg
URVAL: Sker löpande
KONTAKT: Adrian Couture 

Sök tjänsten nedan genom att fylla i din information samt bifoga dokument. Logga gärna vidare in på "Mina sidor" efter att du bekräftat ditt konto, här kan du skapa din kandidatprofil vilket utökar din chans till drömjobbet! Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på [email protected]

#provingenjör #testingenjör #tekniker #provning #automation #mekatronik Visa mindre

CI Engineer

Ansök    Jan 18    Randstad AB    Civilingenjör, maskin
Job description We are now looking for a CI Engineer to join the Platform Development team at one of our largest clients. In this position you will have a meaningful role in our EP5G DevOps team which has the full responsibility for developing and managing applied CI framework as well as the live Cloud Environment.   They apply lean and agile ways of working, hence continuous improvement, innovation, and knowledge sharing are valued parts of the daily wor... Visa mer
Job description
We are now looking for a CI Engineer to join the Platform Development team at one of our largest clients. In this position you will have a meaningful role in our EP5G DevOps team which has the full responsibility for developing and managing applied CI framework as well as the live Cloud Environment.
 
They apply lean and agile ways of working, hence continuous improvement, innovation, and knowledge sharing are valued parts of the daily work. You will continuously encounter new challenges and get the opportunity to drive activities such as management and development of applied CI framework, pipeline deployment and management, code analysis and developer support.
 
This is supported by close cooperation with software development and test teams both locally and on other sites, as well as service providers. We offer a stimulating work environment, vast competence development opportunities and possibilities to gain both professional as well as personal growth. 

Responsibilities
Develop and manage CI framework and tooling, including definition of Continuous Integration strategies as well as tool sets and subsequent implementation
Support development teams in setting up and deploy development pipelines in Jenkins according to agreed strategy, hence enable developers to deliver SW in small quality assured batches
Implement and manage code analysis infrastructure by integrating 3PP software
Contribute and execute on test framework development which is to be applied in the Dedicated Networks organization, hence enable teams to implement component and e2e tests
Set guidelines, practices when it comes to using developed test framework
Develop and implement data visualization, hence support development organization to interpret pipeline outcome and SW quality through e.g. regression test feedback to developers
Drive troubleshooting, root cause analysis, provide high quality support and advice to developers within CI domain, hence enable an effective development environment and world class customer support
Drive continuous improvements and innovation of services and development processes


Qualifications
A successful candidate is driven, has very good networking, collaboration, and interpersonal skills in English, both in written and oral form, a talent for innovation, and excellent analytical and problem-solving skills, covering:


Bachelor of Science degree in Engineering, Computer Science or similar
Interest and experience of working with:
CI/CD development and implementation
Jenkins/GitLab CI to automate and trigger pipeline flows
Test automation and hands-on experience with Python or Golang to automate tasks
Test framework development and management
Database management (such as )
Data visualization tools
Public Cloud
Golang/Java applications hence perform pipeline troubleshooting
Linux, scripting and IP Networking
Eager to learn, curious, solution oriented as well as true standout colleague 
Result oriented, having an innovative mentality and valuing high quality results
Minimum 5 years of relevant work experience within the field of CI and/or SW development is highly preferred


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.
With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

System Verification Engineer

Ansök    Jan 16    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a System Verification Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At R... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a System Verification Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-02-15. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
Looking for a System Verification Engineer with a good engineering background and interest in SW verification and validation. You will work with a full-stack application which is supporting workshop technicians in the Volvo dealer network with programming, testing, calibration and troubleshooting of trucks. The main focus in this position is to collaborate with Product owners and validate the application to make sure all looks good and work as intended from an end-to-end user perspective. The team test directly on trucks as well as on product simulators and CANoe rigs. We are also using automated test suites for regression testing. Automotive knowledge is good to have.

Qualifications
Interest in SW test methodology
Mechatronics and practical vehicle knowledge
CANoe rigs incl reading logs
Test script automation (ALM+UFT, Robot Framework)
Some programming skills (Python, C, CAPL)
Bosch GradeX authoring environment
Driving license, level B and C
Test automation experience is a merit
Except for positive mindset and a drive to learn new things


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Functional Safety

Ansök    Jan 8    Randstad AB    Civilingenjör, maskin
Job description We are looking for new colleague to join our team in a new automotive assignment as a Functional Safety Engineer. Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Rand... Visa mer
Job description
We are looking for new colleague to join our team in a new automotive assignment as a Functional Safety Engineer.
Randstad Engineering is specialized in competences within Engineering. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Engineering, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-02-15. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
The main responsibilities entailed in this role are:
Lead and perform functional safety engineering activities for product development teams and develop technical work products
Planning and ensure that safety plan activities meet program timing
Drive the development of functional and technical safety concepts within the function, system, subsystem, software, and hardware
Support the development of verification and validation strategies within the subsystems, software, and hardware, e.g. hazard and risk assessment (HARA), FTAs, DFMEAs, functional safety concept & technical safety concept
Align the Functional Safety standards and industry common practices into VBC processes
Ensure functional safety work products are prepared, and stored correctly, and revisions are managed and released in timely manner
Align safety related topics with suppliers and customers
Support and coach the organization with respect to functional safety


Qualifications
Required qualifications:
M.Sc. or B.Sc. within Relevant area
Functional Safety Certification
High Knowledge of functional safety activities and deliveries according to ISO 26262
Documented experience of working with functional work products
Understanding of SW/HW Architecture & schematics
Fluent in English, spoken and written
Excellent communication skills.

As a person, you have a broad technical know-how and you like to be in the lead, but also to perform own tasks. You will be an important player to get this to work successfully. To do so, you must have a strong ability to share knowledge, develop and motivate individuals and teams.

About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Test Rig Development Engineer Specialist

Ansök    Jan 16    Randstad AB    Civilingenjör, maskin
Job description Randstad Technologies is looking for a Test Automation Engineer to join our dynamic team and contribute to the development of our test rigs for our new electrical architecture for vehicles. This is a consultant opportunity through Randstad Technologies. Randstad Technologies is specialized in competences within IT. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always th... Visa mer
Job description
Randstad Technologies is looking for a Test Automation Engineer to join our dynamic team and contribute to the development of our test rigs for our new electrical architecture for vehicles.
This is a consultant opportunity through Randstad Technologies. Randstad Technologies is specialized in competences within IT. As a consultant with us, you get a competitive salary, benefits and collective agreements. Your consultant manager is always there for you and ensures that you get varying and developing assignments at different companies, within different industries. At Randstad Technologies, your personal development is in focus, and you are offered a large network and many social activities.
Please apply at www.randstad.se, no later than 2024-02-05. If you have questions, please contact [email protected]. For us, it is important that all competence and skills in the labor market are utilized. We welcome all applicants and strive for diversity.

Responsibilities
As a Test Automation Engineer, you will be responsible for designing ,developing and implementing automated testing solutions. You will be a part of the Verification and Integration group within the Electronics & Software Architecture Department.
Your main responsibilities are:
Understanding customer requirement
Using and Modifying the test automation framework
Designing and writing test automation scripts
Execution of automation scripts and validating it fulfills the intent
Working with QA analysts and software developers to find solutions
Ensuring automation runs as a part of CI pipeline


Qualifications
Requirements:
Strong knowledge of test automation and scripting languages like Python and CAPL.
Good knowledge in automotive SW testing
Experience with CI/CD.
CAN, LIN, and Ethernet knowledge
Solid understanding of vehicle architecture.
Good Communication skills


About the company

Randstad
At Randstad, we see the possible in people. With business all over Sweden and in all areas of expertise, we help people find work that feels good, where they get the opportunity to develop and realize their true potential.

With close to 600 000 employees in 38 countries, Randstad is the global leader in the HR services industry. Our mission is to become the world’s most valued working life partner. By combining our passion for people with the power of today’s technology, we support people and organizations in realizing their true potential. We call it Human Forward. Visa mindre

Erfaren beräkningsingenjör till Combitech i Göteborg

Ansök    Jan 9    Combitech AB    Civilingenjör, maskin
Har du lång erfarenhet inom beräkning och analys? Vi söker nu erfarna beräkningsingenjörer som kan lösa problem självständigt. sig i en spännande expansiv fas inom försvarsindustrin och ser fram emot att välkomna dig till vårt team. DIN ROLL Som erfaren beräkningsingenjör kommer du att: * Sätta din expertis till arbete i produktutvecklingsprojekt inom en mängd discipliner och domäner. * Tekniskt leda och vägleda juniora kollegor i sin utveckling... Visa mer
Har du lång erfarenhet inom beräkning och analys? Vi söker nu erfarna beräkningsingenjörer som kan lösa problem självständigt. sig i en spännande expansiv fas inom försvarsindustrin och ser fram emot att välkomna dig till vårt team.





DIN ROLL

Som erfaren beräkningsingenjör kommer du att:

* Sätta din expertis till arbete i produktutvecklingsprojekt inom en mängd discipliner och domäner.
* Tekniskt leda och vägleda juniora kollegor i sin utveckling som beräkningsingenjörer.
* Genomföra detaljerade FE-analyser inom områden som hållfasthet, utmattning, skadetålighet, strukturdynamik, akustik och islagsanalyser.
* Använda en rad kommersiella verktyg för beräkning, inklusive Nastran, ADAMS, Abaqus, Optistruct, Hyperworks, LS-DYNA, ANSYS, och ANSA.
* Proaktivt bidra till produkt- och metodförbättringar, kvalité och kostnadsbesparingar.
* Spela en aktiv roll i att skapa och upprätthålla ett gott arbetsklimat och en stark teamkänsla.
* Erfarenhet inom flygindustrin och komposit är meriterande.





VI SÖKER DIG SOM

* Är nyfiken på att ta dig an konsultrollen och växa tillsammans med oss.
* Har en relevant civilingenjörsutbildning inom mekanik, i kombination med 7+ års arbetslivserfarenhet som beräkningsingenjör.
* Har en naturlig förmåga att identifiera praktiska lösningar på konstruktionsproblem.
* Är flytande i svenska och engelska, både i tal och skrift.
* Har en positiv attityd och en stark initiativförmåga. Du trivs i en kundorienterad miljö och har en naturlig fallenhet för problemlösning.
* Har en analytisk läggning och ett starkt intresse för beräkningar.


Då tjänsten kan innebära arbete som omfattas av försvarssekretess krävs det att du genomför och godkänns i en säkerhetsprövning med registerkontroll.



Urval sker löpande. Vi ser fram emot din ansökan!




KOM & GÖR SKILLNAD

På Combitech ingår vårt kompetensutvecklingsprogram Combitech GROW som en naturlig del i din anställning! Vi ger dig möjlighet att växa i en företagskultur som uppmuntrar till både personlig och professionell utveckling, samtidigt som du arbetar i spännande och givande uppdrag.



Hos oss får du vara med och utveckla teknikområden för att möta kraven på framtidens digitala samhälle. Vi har flera projekt inom digitalisering, autonomi, artificiell intelligens, cyber security och 5G-utveckling. Våra konsulter utvecklar också flygande hjärtstartare, system som ökar säkerheten på flygplatser och nya stridsflygplanet Gripen E som gör samhällen trygga!



Vill du veta mer om hur det är att arbeta hos oss? Kolla in våra karriärsidor! Visa mindre

Electronics / Mechatronics Engineer Within Automotive

WHO WE ARE LOOKING FOR You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!   The personal qualities that we value are the ability to solve problems... Visa mer
WHO WE ARE LOOKING FOR

You should have a broad knowledge and experience of developing electronics and writing technical requirements. You feel comfortable of owning and taking responsibility of your components and do so proactively and learn quickly. You have the right attitude when facing new issues. You are curious, positive, proactive and want to work in the automotive business!

 

The personal qualities that we value are the ability to solve problems with an energetic touch, someone who is genuinely interested in technology and, in that way, create confidence to build long lasting relationships with our world leading automotive manufacturer partners!

 

WHAT WE OFFER YOU

At ALTEN, every individual is equally valuable in building tomorrow’s world today. We meet future challenges by supporting our clients’ projects and enabling our people to reach their full potential. We do so by offering technological challenges, fulfilling opportunities, inspiring togetherness and the possibility to contribute to a sustainable future.

 

We are convinced that your development is driven by your passion. By being active in several different industries, we can offer a wide range of assignments and an opportunity to influence both the world around you and your own development.  With a coaching leadership, our leaders will guide you in the right direction. We also offer personalized training opportunities through your individual training budget, which you can use in our internal ALTEN Academy or on external courses.

 

At ALTEN, there are numerous opportunities to join an inspiring togetherness and do what you enjoy, together with your colleagues. During our Tech Weeks you get to hear what your colleagues are working on and a chance to share your own experiences. We have several internal networks, such as ALTEN Sports and Women@ALTEN, where you are given the opportunity to get active with your colleagues or pursue issues and topics that you are passionate about.

 

At ALTEN, we think it's important to have a balance between work and spare time, which is why we offer three extra days off a year. We have a collective agreement and offer benefits like pension, insurances and wellness grants.

.

 

TYPE OF RESPONSIBILITIES:
Initiate and develop design and systems concepts to meet project objectives
Develop the product in collaboration with suppliers and customers
Coordinate cross-functional work to ensure product quality, delivery, product cost and smooth integration of systems
Create, modify, and release product documentation
Analyze and troubleshoot issues related to the systems and propose solutions
Secure testing and validation of the system to ensure compliance with industry standards



REQUIREMENTS:
Bachelor's or Master's degree in Electrical, Mechatronics or Mechanical Engineering
3-5+ years of relevant experience in the automotive industry
Technical requirements and specifications
Experience in mechatronic system design
Strong communication and teamwork skills
Fluent in written and spoken English - Swedish is meritorious

 

ABOUT ALTEN

ALTEN is one of Europe’s largest consulting companies within Engineering, IT and Life Sciences with over 54,000 employees in more than 30 countries. We’re a global actor with a local presence with 1400 committed colleagues in offices from Lund in the south to Skellefteå in the north. Our engineers carry out complex and highly technical projects throughout the product development chain of the most prestigious companies in sectors such as Automotive, Aerospace & Defense, Energy, Manufacturing, Public Sector and Life Sciences.

 

For four years in a row, ALTEN has been named one of Sweden's most attractive employers by Karriärföretagen, an award for employers that offer unique career and development opportunities.

 

WE BELIEVE IN GROWING TOGETHER! Visa mindre