Lediga jobb som Utvecklingsingenjör, maskin i Göteborg

Se lediga jobb som Utvecklingsingenjör, maskin i Göteborg. Genom att välja en specifik arbetsgivare kan du även välja att se alla jobb i Göteborg som finns hos arbetsgivaren.

Mekanikkonstruktör, utvecklingsingenjör

Jobbify är en jobbplattform för vassa kandidater. För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen: Consat är ett entreprenörsdrivet företag med korta beslutsvägar. Vi strävar alltid för att ligga i framkant inom teknik och innovation! Nu letar vi efter nya medarbetare som vill jobba med spetsteknik, och göra Consat ännu bättre. Engineering Services är på jak... Visa mer
Jobbify är en jobbplattform för vassa kandidater.
För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen:

Consat är ett entreprenörsdrivet företag med korta beslutsvägar. Vi strävar alltid för att ligga i framkant inom teknik och innovation! Nu letar vi efter nya medarbetare som vill jobba med spetsteknik, och göra Consat ännu bättre. Engineering Services är på jakt efter fler mekanikingenjörer med erfarenhet av konstruktion eller produktutveckling. Du kommer att dyka in i allt från kravställning och konceptutveckling till att skapa tillverkningsunderlag i 3D och 2D. Och om du har tur, får du skruva ihop grejer i vår verkstad! ?????

Vi är ett entusiastiskt gäng med ett genuint teknikintresse som älskar att dela våra kunskaper. Våra erfarna ingenjörer tar gärna rollen som mentorer och hjälper sina grönare kollegor att växa. Vi satsar på långsiktighet, respekt och en stor dos skratt i vardagen.

Vi jobbar med både små firmor och stora internationella bolag. Våra kunder finns inom alla möjliga branscher, från väletablerade industrier i regionen till nykomlingar på marknaden. Ibland är vi hos kunden, ibland på våra egna kontor och då främst i Partille.

Vad vi erbjuder:

En trygg och långsiktig arbetsplats

Riktigt schyssta kollegor ????

En bredd av intressanta och stimulerande uppdrag både på våra kontor och hos           våra spännande kunder.

Förtroende, kollektivavtal och bra förmåner


Vi letar efter dig som ?????:

Älskar att lösa problem och lista ut hur saker fungerar

Du gillar att samarbeta och kanske ta en fika med kollegorna

Brinner för att hjälpa kunderna skapa lösningar som gör dem glada

Har flera års erfarenhet av konstruktion eller produktutveckling inom något av våra       teknikområden, som t.ex. Life Science eller industri

Har koll på verktygsbunden konstruktion och komponentval vid maskinutveckling

Är en mästare på ett 3D-CAD-verktyg som Creo, Inventor, SolidWorks eller Catia

Talar och skriver Svenska och Engleska


Vad vi gör inom Engineering Services:

Vi konstruerar coola specialmaskiner och verktyg samt utvecklar produkter inom industri, Life Science och elektrifiering av fordon. Våra uppdrag spänner över allt från maskiner som monterar kullager till de som matar maskar och hanterar produkter i alla storlekar – från tandimplantat till tåg och lite till!

Kontakt:

Har du frågor om tjänsten? Skicka ett mail till Anna Melin på [email protected]. På grund av semester kan det ta lite tid att få svar, men vi återkommer så snart vi kan!

Vår långsiktiga syn på våra medarbetare har lett till att Consat för tolfte året i rad har utsetts till ett av Sveriges 100 Karriärsföretag! Läs mer på: www.consat.se. Din roliga karriär börjar här! ???? Visa mindre

System responsible Cooling system

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. Would you like being a part of shaping future solutions for sustainable transport and the infrastructure industry? Do you enjoy teamwork and developing yourself with others to meet future challenges? The... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination.

Would you like being a part of shaping future solutions for sustainable transport and the infrastructure industry? Do you enjoy teamwork and developing yourself with others to meet future challenges? Then take the opportunity to join our team. We are looking for a new group member to play an important role in the development of our future internal combustion engines.   
This is us  
The Cooling System group is part of the Base Engine department in Volvo Group Trucks Technology (GTT) based in Gothenburg. The group has global design and system responsibility for cooling functions within heavy duty combustion engines, electromobility vehicles as well as fuel cells vehicles. We also have responsibility for the hydraulic system and components for our H2 internal combustion engine project.  
We are proud product owners and accountable for the lifecycle management of our products, from advanced engineering, through product development into the maintenance phase. On a daily base we cooperate with purchasing, projects, test engineers and suppliers as well as our colleagues at the sites in France, USA, Brazil and India. Our products are used in more than 190 markets and considered to be part of the core business. As an employee at Volvo GTT you will be offered good educational opportunities and an international environment. Within the department there are good possibilities to learn more about other technical areas and advance in your carrier as a leader in a technical area, project, or line organisation. We trust each other and act as a team, stay close to the product and provide opportunities for professional and personal growth. 
Our belief is that diversity give the best prerequisites to create a creative and innovative environment. We aim to create diverse groups that include and utilize our different experiences and backgrounds in a good way. Your personality and engagement will be highly appreciated.   
This is what you will do 
You will have a cooling and hydraulic system development responsibility and will work close to the components to support development, strategies, and act as mentor for component engineers.  
Both cooling and hydraulic systems are split in different organisations within the company where key to success is collaboration and teamwork. The main task is to keep the propulsion part of the cooling and hydraulic system together and synchronized with other systems and organizations. Your daily work will include a wide range of activities such as setting roadmap for the future, agreeing on product requirements, creating and update test codes, provide input to hardware development, give recommendations, lead workshops and development work. Component development will be an important part to contribute in. You will be responsible through the whole chain from early development and roadmaps to maintenance, meaning that you are accountable for solving quality issues.  
As part of our group and Base Engine you are also expected to take part in continuous improvements and support on other tasks when possible.   
Who are you? 
We are looking for a person with great teamwork skills who enjoys developing yourself and your team, as well as interacting with colleagues and stakeholders. You have several years of experience from development of both mechanical and electrical fluid components. From early phase to maintenance. You have experience from and understand cooling and hydraulic system architecture and properties. A positive mind-set and can-do attitude with good communication skills will be needed in this role. You are analytical and know the importance of developing new technical products in a structured and organized way. You pay attention to details and can take necessary actions when required. You value an open and honest environment where trust enables high performing teams.  
Other qualifications  
* You have a M.Sc. within Product Development or similar.   
* You have experience from cooling and hydraulic systems.  
* You have at least 2 years of experience from development of fluid components such as coolant pumps and valves. This includes understanding of system and requirements, component testing, technical documentation as well as technical negotiations with suppliers.  
* Knowledge in mechatronics and understanding of SW and communication integration is also needed.  
* Knowledge in Creo is a requirement.  

Group dynamics and teamwork skills are important and will be taken into consideration in the recruitment process. Former experience from Volvo Group Trucks Technology (GTT) will be an advantage.  
We look forward to receiving your application! 
If you have any questions, please get in touch:
Lina Schäfer, Manager Cooling systems, [email protected] 
Last application date: August 11th, 2024.
Please do not expect any communication earlier than week 33 due to the Swedish summer vacation period. We look forward to receiving your application! 
We value your data privacy and therefore do not accept applications via mail. Visa mindre

Laboratory Development Engineer - Automation & Simulation

Nytt
Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transpo... Visa mer
Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

This is us, your new colleagues
Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, maintenance, and development of heavy-duty drivelines testing (engine, transmission, electromobility and Fuel Cells/Hydrogen) and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility. We cooperate close with product owners, technology owners, certification, and compliance as well as other functions. We have test facilities and laboratories where a mix of theory and practical work is necessary to deliver and develop within present and new technologies. VT&MT; is a part of Powertrain Engineering, Volvo Group Trucks Technology (GTT) located in Gothenburg.
You will be part of the method and technical development team with different expertise areas (software, emissions, measurements, electronics, fluids, mechanical etc.). All work together with one target: To develop world-class test facilities and methods.

About the role
As a Laboratory Development Engineer, you will lead and deliver various development activities, where creativity, quality and flexibility are of prime importance and keys to success. You will be the technical advisor in our development projects for automation and simulation requirements. You will work in tight cooperation with Volvo test and verification engineers, maintenance and operation engineers, project managers, suppliers, and subcontractors.
You will act as a mentor on the technical equipment and methods used in the lab and support teams with advice and educational courses. You will also balance your time between office work and work in the lab.
To develop your specialist knowledge, drive, and lead development to create sustainable solutions, strategies & methods within test cell automation and simulation activities. For example:
* Develop expert knowledge of our automation systems used in the test cells.
* Work with simulation models and integrate them with test objects in the test cell, either to simulate the remainder of the truck or serve as a digital twin for the test object.
* Develop new test sequences in the automation systems (involves programming to a certain level).
* Define automation systems requirements on new test cell investments.
* Improve working methodology related to automation systems in test cells.
* Support in test cells on automation systems topics.


Who are you?
We believe that you are a flexible person with a positive mindset and can-do attitude. You love to inspire, develop, and motivate your colleagues and yourself, building relationships on a local and global level. With your team spirit, you want to be an important team player, putting the team in first place, ready to do what is needed to make the team more efficient. Strong action will make you take own initiatives when something needs to be done or improved and do that with enthusiasm and high energy.
Requirements:
* University degree in Computer Science, Automation and Mechatronics or equivalent education/experience.
* Experience from being responsible for defining state-of-the-art technology and identifying future trends, as well as driving innovation of new solutions and concepts.
* Skills and experience in programming, e.g., Python, C# or similar.
* Experience in using simulation tools, like MATLAB and Simulink (basic level).
* Holistic view and analytical ability to understand future testing demands, coordinate & synchronize testing demands into plans (test facility road map).
* English proficiency (verbal and written) – Swedish is a merit!

We highly value the experience within the area of automotive testing activities, in product development, test engineering or lab development.

Due to summer vacations, all applications will be reviewed from week 33 forward. Please do not expect any communication earlier than this. We look forward to receiving your application!
Last application date: August 11th, 2024.
Positions: 2

Who we are and what we believe in
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Visa mindre

Teknisk Projektledare till den gröna omställningen

Teknisk Projektledare till den gröna omställningen  Vill du vara en del i ett ledande bolag som tar en aktiv roll i den gröna omställningen och som dessutom erbjuder dig utvecklingsmöjligheter och fina förmåner? Vad sägs om: Uppdrag inom energisektorn som bidrar till en grönare värld Uppdrag inom industrin som bidrar till att minska koldioxidutsläppen och vårt carbon footprint Ett bolag med en tydlig hållbarhetsplan eller: Kollektivavtal med konkurrensk... Visa mer
Teknisk Projektledare till den gröna omställningen 
Vill du vara en del i ett ledande bolag som tar en aktiv roll i den gröna omställningen och som dessutom erbjuder dig utvecklingsmöjligheter och fina förmåner?

Vad sägs om: Uppdrag inom energisektorn som bidrar till en grönare värld
Uppdrag inom industrin som bidrar till att minska koldioxidutsläppen och vårt carbon footprint
Ett bolag med en tydlig hållbarhetsplan
eller: Kollektivavtal med konkurrenskraftiga pensions- och försäkringsförmåner
Generöst friskvårdsbidrag på 5000 kr/år
Möjlighet till pensionssparande via löneväxling
Tillgång till företagets fjällstugor
En flexibel och positiv arbetsmiljö?
Tät dialog med din närmsta chef om uppdrag och din personliga utveckling
Teamträffar
En trygg anställning med de bästa förutsättningarna??
Erbjudande om kurser efter din individuellt utvecklade plan
Arbetsuppgifter 
Som teknisk projektledare på Head Energy får du viktig roll för att driva samhället framåt, både i energiutvecklingen och industrins gröna omställning!

Du kommer få möjligheten att leda högteknologiska utvecklingsprojekt. Projekten ligger i våra affärsområden Energi, Industri/Produktutveckling och Process. Detta innebär att du som Projektledare kommer ha en central roll och leda team bestående av personer inom el/elektronik, mjukvara/automation, mekanik, test, produktion etc.
Arbetet sker antingen hos och med våra kunder eller i våra in-house projekt, vilket skapar stora möjligheter för en personlig erfarenhetsutveckling.
 
Din vilja, personliga ambition, din kompetens och utvecklingsplan skapar tillsammans med kunden stora möjligheter för din framtid.
Projekten kan innebära nyutveckling eller produkt-, maskin- och systemuppdateringar. Du kommer i många fall också få möjligheten att vara med från ax till limpa och vara med och se produkten/systemen idrifttas och produktionsättas.

Som teknisk projektledare kommer du bla få jobba med: Projektledning av multidisciplinära projekt
Ansvar för budget och tidplan
Ansvar för teknisk leverans och projektuppfyllnad
Ansvar för projektets kvalitetsuppfyllnad
Kontaktytan mot underleverantörer och produktion
Vara det tekniska stödet gentemot eftermarknad och produktion, samt teknisk support gentemot slutkund
Säkerställa att utvecklingsarbetet sker enligt kundens rutiner samt följer gällande normer och standarder
Kvalitetssäkra och tekniskt granska utvecklingsarbetet mot den ursprungliga beställningen
Delta i test och produktionssättning
Utföra risk- och säkerhetsbedömningar/analyser
Utbildning och erfarenhet Civil-/Högskoleingenjör inom teknik
Minst 2 års arbetslivserfarenhet inom teknisk projektledning
Erfarenhet av produktutveckling och/eller utveckling av produktionsnära system
Meriterande med erfarenhet som ingenjör (tex mekanikkonstruktör, programmerare, el/elektronikkonstruktör)
Erfarenhet av projektledning inom energiområdet och företag med produkter inom denna bransch är meriterande
Stationeringsort?
Göteborg

Språk Svenska - flytande i tal och skrift
Engelska - flytande i tal och skrift
Om dig Du är framåtlutad, nyfiken och gillar utmaningar
Du brinner för framtidens teknik
Du värdesätter ett arbete där du bygger relationer, skapar nätverk och känner ansvar för dina arbetsuppgifter.
Du trivs i rollen som konsult och uppskattar att arbeta med människor i varierande team.
Om oss
Head Energy har sedan starten 2010 växt till att globalt vara 850 anställda och har senaste åren haft en stark tillväxt i Sverige. Vi söker nu dig som vill vara med på den fortsatta resan.
Som teknisk konsult hos våra kunder erbjuder vi dig utvecklande och utmanande uppdrag där du får möjlighet till personlig utveckling samtidigt som du är en del av Head Energy's tillväxtresa.
Arbetsuppgifter och projekt innehåller stor variation och vi söker dig som ser det som lärorikt och inspirerande.

Tillsammans med dig och våra kunder är vi på Head Energy One step ahead!

Med en flexibel arbetsmiljö och tät kontakt med din engagerade chef vill vi ge förutsättningar för dig som medarbetare att trivas med ditt uppdrag och ha arbetsuppgifter du tycker är inspirerande och spännande. Vår ambition är att göra vårt bästa för att stötta dig i din personliga och professionella utveckling. Vi ordnar regelbundet träffar och aktiviteter med vårt team. Head Energy har kollektivavtal med Innovationsföretagen som inkluderar Sveriges ingenjörer och Unionen.

Head Energy - Detta är vår historia

Urval kommer göras löpande under ansökningstiden. Head Energy använder ett enkelt och användarvänligt kandidatsystem. Genom att länka till ditt CV eller LinkedIn-profil kan du ansöka om våra lediga tjänster med en knapptryckning. Att hålla din profil uppdaterad ökar sannolikheten för att vi kan matcha din expertis med relevanta positioner Visa mindre

Plant Coordinator

THIS IS US, YOUR NEW COLLEAGUES! GTO International Manufacturing (IM) is an organization with colleagues from many parts of the world that truly embrace diversity as a success factor. Our aspiration is to be an attractive employer for all genders and cultures in line with the Volvo Group values. The GTO International Manufacturing focus is to support the Sales & Marketing organization by being present with assembly operations in the local market when requ... Visa mer
THIS IS US, YOUR NEW COLLEAGUES!
GTO International Manufacturing (IM) is an organization with colleagues from many parts of the world that truly embrace diversity as a success factor. Our aspiration is to be an attractive employer for all genders and cultures in line with the Volvo Group values.
The GTO International Manufacturing focus is to support the Sales & Marketing organization by being present with assembly operations in the local market when required. We operate some fully Volvo owned plants in South Africa, India, Algeria, United States and Australia as well as Joint Ventures in Saudi Arabia. We also support KD assembly worldwide together with Private Partners. Our industrial development teamwork close to all sales organizations investigating localization needs, both change in existing footprint as well as expansion to new markets.
GTO IM Manufacturing Engineering department oversees manufacturing engineering activities necessary to secure the production in the different KD-plants. It includes layouts, assembly processes and documentation, tooling and equipment, support on site when needed to secure the start of production of new plants and new products and product maintenance.
Who are you?
Do you have engineering experience from the production environment and would like to contribute to production stability?
We are looking for an experienced person who enjoys working in a global context and sees the benefit of building strong relationships. A team player with strong drive to deliver on commitments and prioritizing our customers.
In our team you will work in a creative networking atmosphere and now we are looking for an engineer to be located in Gothenburg supporting the KD plants.
Key responsibilities
Provide production and engineering support to KD-factories, coordinate and drive long term development work within the area of responsibility.
The responsibility also includes participating in start-up projects of new KD-factories as well as the introduction of new products into existing factories.
Main activities
Coordinate product introductions (e.g., tooling, DCN’s).
Develop and evaluate product & process documentation.
Participate in product and process projects.
Provide factories with relevant information linked to batch deliveries.
Assist and educate in connection with product and process changes.
Support the KD-plants regarding layout, equipment, and breakdown levels.
Be KD-plants representative in contacts within GTO/GTT.
Contribute with engineering advise to give KD-plants prerequisites to meet their KPI targets.
Develop KD-plants towards GTO strategies and wanted positions.

Critical experience and competence
Good understanding of truck final assembly and cab trim processes.
Volvo Performance System (VPS) knowledge.
Global Trucks Operations engineering work experience or equivalent is an advantage.
Vehicle development process and parts documentation (KOLA) knowledge.
Calibration process experience is an advantage.
Business and customer oriented with ability to organize and lead tasks.
Open multi-cultural flexible mind-set.
Autonomous and able to self-learning.
Fluent in English, written and spoken.
Networker with good communication skills. Visa mindre

Technical Preparation Engineer

Are you ready to be part of a team of highly engaged and skilled engineers? Join us at Group Trucks Operations in Sweden as a Technical Preparation Engineer for the EE HW Chassis area. This is an opportunity to push your professional skills and contribute to a transformative phase towards sustainability. If you're passionate about product development, manufacturing improvement, and shaping the future, come create a new tomorrow with us! Mission: The mis... Visa mer
Are you ready to be part of a team of highly engaged and skilled engineers? Join us at Group Trucks Operations in Sweden as a Technical Preparation Engineer for the EE HW Chassis area. This is an opportunity to push your professional skills and contribute to a transformative phase towards sustainability. If you're passionate about product development, manufacturing improvement, and shaping the future, come create a new tomorrow with us!


Mission:
The mission of the Technical Preparation Engineer is to deliver a product that is secured & aligned according to Volvo Production System and Volvo Operations Concept. As a Technical Preparation Engineer, you will be the GTO engineering interface in product development.

Position Description:
As a Technical Preparation Engineer, you'll be part of a dedicated team impacting the next generation truck design to support manufacturing plants and operators. Your main responsibility will be product preparation within Chassis Heavy Duty Trucks, acting as the key interface between Final Assembly Plants and Group Truck Technology for product changes and modifications.

We value positivity, open-mindedness, and a holistic perspective on activities. Teamwork and effective communication with colleagues worldwide are crucial.
Main Activities and Responsibilities:
In this role, you will play a pivotal part in ensuring that product development aligns seamlessly with project targets, covering aspects like assembly graphs, Physical Modules, and Marriage Points. Your responsibilities include detailing technical requirements, evaluating and recommending product concepts, and actively contributing to the development and verification of technical solutions. You will manage internal coordination within the 'GTO Product,' providing valuable input on the assembly time impact and overseeing product documentation. Leading early-stage implementation solutions within GTO, supporting factory activities, and driving the product problem resolution process are integral aspects of your role. Additionally, you will take the lead in implementing product quality improvements identified in the field for GTO while actively managing and developing knowledge in your area of responsibility.

To excel in this role, you should bring:
A Master or Bachelor's degree in science or equivalent manufacturing experience, preferably in Mechanical Engineering.
Approximately 5-8 years of experience in the Automotive Industry, particularly in trucks, with a strong foundation in project work within Volvo.
Knowledge and experience in production engineering and/or production.
Technical competencies encompassing a deep understanding of automotive products, product development, and proficiency in using quality tools such as Design For Assembly (DFA), P-FMEA, etc.
Excellent verbal and written skills in both Swedish and English.
Strong personal skills, including the ability to build networks and collaborate effectively in a multicultural environment. You should be solution-focused, dedicated to delivering on time, possess negotiation skills, and demonstrate analytical prowess.


At Volvo Trucks, we believe in diversity, maximizing the team's potential by combining knowledge, experience, age, gender, and nationality. Teams with diverse backgrounds increase agility and creativity.

Location:Gothenburg
Last Application Date: 12th June 2024




We value your data privacy and therefore do not accept applications via mail.

Who we are and what we believe in
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities.

Group Trucks Operations encompasses all production of the Group’s manufacturing of Volvo, Renault and Mack trucks, as well as engines and transmissions. We also orchestrate the spare parts distribution for Volvo Group’s customers globally and design, operate and optimize logistics and supply chains for all brands. We count 30,000 employees at 30 plants and 50 distribution centers across the globe. Our global footprint offers an opportunity for an international career in a state-of-the-art industrial environment, where continuous improvement is the foundation. As our planet is facing great challenges, we - one of the largest industrial organizations in the world - stand at the forefront of innovation. We are ready to rise to the challenge. Would you like to join us? Visa mindre

Senior Base Engine Engineer for Aurobay

On behalf of Aurobay, we are currently seeking a Senior Base Engine Engineer who will conduct cutting-edge and innovative research and development to advance our technology and capabilities, reaching our sustainability goal of net zero. If you have experience with internal combustion engines, this is a perfect opportunity for you! About the position As a Senior Base Engine Engineer, you will play a pivotal role in our organization by leading the developm... Visa mer
On behalf of Aurobay, we are currently seeking a Senior Base Engine Engineer who will conduct cutting-edge and innovative research and development to advance our technology and capabilities, reaching our sustainability goal of net zero. If you have experience with internal combustion engines, this is a perfect opportunity for you!

About the position

As a Senior Base Engine Engineer, you will play a pivotal role in our organization by leading the development of critical components: the Base Engine Timing Drive system and the Front-End Accessory Drive (FEAD) for our internal combustion engines. Collaborating closely with our Design Engineers, you’ll define system requirements, verify components with component owners and systems, and ensure the successful delivery of program content within specified timelines and quality standards.

Responsibilities:

Component Development and Verification:

Lead the design team (component owners) and develop and validate with them the Base Engine Timing Drive system and FEAD.
Ensure compliance with system requirements and performance specifications.
Collaborate with cross-functional teams to integrate these components seamlessly into our engine architecture.

Quality Assurance and Program Delivery:

Secure timely delivery of program content, adhering to cost and quality targets.
Report progress and challenges to both the line organization and project management.

System Planning and Technical Support:

Participate in system-planning activities, considering long-term implications.
Provide technical guidance and support to the design team.
Address any quality issues that arise during development.

End-to-End Involvement:

Engage from the concept phase through sourcing and into production.
Collaborate with Base Engine, Analyze & Verification, Engine Calibration, and NVH teams.
Contribute to the overall success of our engine development projects.

The ideal candidate has:  
Bachelor’s or Master’s degree in Mechanical Engineering or other relevant engineering area.
A minimum of five years of experience within Base Engine for combustion engines
Practical and theoretical knowledge of the product development process.
Excellent organizational skills, ability to meet deadlines, and flexibility in handling multiple tasks.
Leadership experience is meritorious and can step forward when needed.
Fluency in English, both in speaking and writing.


As a person you are:

Analytical with the ability to process complex information.
Strong in communication skills, both written and verbal.


A great emphasis will be put on personal suitability.

About the employment:

This is a recruitment where you will be employed directly by the client company. Friday is responsible for the recruitment process, and all questions should be directed to Friday.

Additional information:
Employment type: Full-time.
Location: Göteborg
Contact person: Gustav Widman, [email protected]
Salary: Fixed monthly.


Apply by clicking the link below. Remember to be quick with your application as we make continuous selection of candidates, and the position can be filled before the application deadline is due.

About FRIDAY:

By being a partner to our clients and candidates, we strive to find the best match for you both. We achieve this by really getting to know our clients’ and candidates’ needs! Of course, we will ensure that requirements and skillsets match. But above all, we focus on the importance of finding harmony between values and corporate culture, which both candidate and client consider optimal.

Our passion is to help people find their dream job within the IT & Tech field. This ambition is a big part of the reason why Friday was founded, aiming to find that workplace that gives you the Friday feeling – every day!

We mainly focus on young engineers who are at the beginning of their careers or soon graduating from university within the IT and Technology field. Our belief is that people reach their fullest potential when looking forward to going to work each day. “Friday – every day,” how about that? Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Jun 24    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Jun 20    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

RF systems engineer

Ansök    Jun 13    SAAB AB    Utvecklingsingenjör, maskin
Want to influence the bigger picture? At Saab, you can realise amazing innovations that keep people and societies safe. Together, we can truly make an impact - and your part matters. We're looking for an RF-subsystem engineer with a focus on integration and verification. You will join a highly skilled team working on the next generation of radar sensor platforms. Your role The department Antenna Core Platform is responsible for developing expertise and ... Visa mer
Want to influence the bigger picture? At Saab, you can realise amazing innovations that keep people and societies safe. Together, we can truly make an impact - and your part matters.

We're looking for an RF-subsystem engineer with a focus on integration and verification. You will join a highly skilled team working on the next generation of radar sensor platforms.

Your role

The department Antenna Core Platform is responsible for developing expertise and solutions to support Surveillance in becoming more modular, enabling faster time to market and achieve a more efficient development.

Today this team of 12 people are developing a platform that addresses these challenges. The department Antenna Core Platform will continue developing this platform but will also work proactively in defining new ones. The department Antenna Core Platform also work directly with customer specific needs within customer contracts.

As a member of Antenna Core Platform you will contribute to new technical solutions as well as you will develop your competence - in cooperation with highly skilled coworkers.

As a system engineer you will take part in all phases of the product development: inception, implementation proposals, cost estimates, systemization, integration, verification and industrialization.

An employment with us means many opportunities in both profession and career.

Your profile

To be successful in the role we see that you have great communication skills, since you will have multiple stakeholders. You are well organized and well versed in writing technical documentation. You also have an interest and aptitude for working in a cross-disciplinary system context.



Required skills:

* M.Sc. degree in a relevant area (electrical engineering, engineering physics, applied mathematics or automation) preferably with a high frequency electronics, opto electronics, or microwave electronics profile
* Practical experience of integration and verification work in a lab environment, including working with advanced instrumentation and data analysis
* Programming skills in Python and/or Matlab



Desired skills

* Experience from designing RF/microwave subsystems and/or antennas
* Experience from advanced RF-, microwave or opto-electronic systems (i.e. radars, radio base stations, point-to-point radios or similar)
* In-depth experience from industry standard RF/microwave design tools such as Keysight ADS and/or Ansys HFSS (or similar)
* Experience from breaking down system requirements into requirements on lower-level functional blocks



This position requires that you pass a security vetting based on the current regulations around/of security protection. For positions requiring security clearance additional obligations on citizenship may apply.



What you will be part of

Behind our innovations stand the people who make them possible. Brave pioneers and curious minds. Everyday heroes and inventive troubleshooters. Those who share deep knowledge and those who explore sky-high. And everyone in between. ?

Joining us means making an impact together, contributing in our own unique ways. From crafting complex code and building impressive defence and security solutions to simply sharing a coffee with a colleague, every action counts. We encourage you to take on challenges, to create smart inventions and grow in our friendly and tech-savvy workspace. We have a solid mission to keep people and society safe.

Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 22,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world.

Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Read more about us here

Kindly observe that this is an ongoing recruitment process and that the position might be filled before the closing date of the advertisement.

If you are interested in what benefits you can take part of as an employee at Saab in Sweden, you can read more about them here Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Jun 17    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Jun 13    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Global Component Responsible Cooling components

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Would you like b... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Would you like being a part of shaping future solutions for sustainable transport and the infrastructure industry? Do you enjoy teamwork and developing yourself with others to meet future challenges? Then take the opportunity to join our team. We are looking for a new group member to play an important role in the development of Cooling System components for our heavy-duty combustion engines, electromobility vehicles as well as fuel cell vehicles. 
This is us
The Cooling System group is part of the Base Engine department in Volvo Group Trucks Technology (GTT) based in Gothenburg. The group has global design and system responsibility for cooling functions within heavy duty combustion engines, electromobility vehicles as well as fuel cells vehicles.

We are proud product owners and accountable for the lifecycle management of our products, from advanced engineering, through product development into the maintenance phase. On a daily base we cooperate with purchasing, projects, test engineers and suppliers as well as our colleagues at the sites in France, USA, Brazil and India. Our products are used in more than 190 markets and considered to be part of the core business. As an employee at Volvo GTT you will be offered good educational opportunities and an international environment. Within the department there are good possibilities to learn more about other technical areas and advance in your career as a leader in a technical area, project or line organisation. We trust each other and act as a team, stay close to the product and provide opportunities for professional and personal growth.

Our belief is that diversity give the best prerequisites to create a creative and innovative environment. We aim to create diverse groups that include and utilize our different experiences and backgrounds in a good way. Your personality and engagement will be highly appreciated.  
What you will do
You aspire to be a member of the cooling system group and be responsible for the development of fluid components for combustion, electromobility and fuel cell vehicles.

Together with a team you will work as a global component owner for different fluid component such as coolant pump and valves. You will set technical requirement of components and together with your colleagues, our collaboration partners and suppliers develop components according to technical specifications and important features as for example sustainability aspects. You will be responsible through the whole chain from early development and portfolio strategies to maintenance. Meaning that you also are accountable for solving quality issues.

You will have daily collaborations with stakeholders connected to the components in scope. As for example projects, buyers, aftermarket, assembly, and suppliers.   
As part of our group and Base Engine you are also expected to take part in continuous improvements and support on other tasks when possible.  

Who are you?
We are looking for a person with great teamwork skills who enjoys developing yourself and your team, as well as interacting with colleagues and stakeholders. You have relevant experience from early component development to solving quality issues and can take responsibility for the whole chain. You have a positive mindset and a can-do attitude combined with good communication skills. You are analytical and know the importance of developing new technical products in a structured and organized way. You pay attention to details and can take necessary actions when required. You value an open and honest environment where trust enables high performing teams.

We believe you have the following knowledge and experience
•    You have a M.Sc. within Product Development or similar.  
•    You have experience from development of fluid components such as coolant pumps and valves giving you a good level of understanding component features. This includes understanding of system and requirements, component testing, technical documentation as well as technical negotiations with suppliers. 
•    Knowledge in mechatronics and understanding of SW and communication integration is also needed. 
•    Former experience from Volvo Group Trucks Technology (GTT) is an advantage.  
•    Basic knowledge in Creo is an advantage. 
We look forward to receiving your application!

If you have any questions, please get in touch: 

Lina Schäfer, Manager Cooling systems, [email protected]
Last application date: June 30th.

We value your data privacy and therefore do not accept applications via mail.

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Jun 10    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Manager Cab Exterior

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Would you like b... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Would you like being a part of shaping future solutions for sustainable transport and the infrastructure industry? Do you enjoy teamwork and developing yourself with others to meet future challenges? Then take the opportunity to join our team. We are looking for a new group member to play an important role in the development of Cooling System components for our heavy-duty combustion engines, electromobility vehicles as well as fuel cell vehicles. 
This is us
The Cooling System group is part of the Base Engine department in Volvo Group Trucks Technology (GTT) based in Gothenburg. The group has global design and system responsibility for cooling functions within heavy duty combustion engines, electromobility vehicles as well as fuel cells vehicles.

We are proud product owners and accountable for the lifecycle management of our products, from advanced engineering, through product development into the maintenance phase. On a daily base we cooperate with purchasing, projects, test engineers and suppliers as well as our colleagues at the sites in France, USA, Brazil and India. Our products are used in more than 190 markets and considered to be part of the core business. As an employee at Volvo GTT you will be offered good educational opportunities and an international environment. Within the department there are good possibilities to learn more about other technical areas and advance in your career as a leader in a technical area, project or line organisation. We trust each other and act as a team, stay close to the product and provide opportunities for professional and personal growth.
Our belief is that diversity give the best prerequisites to create a creative and innovative environment. We aim to create diverse groups that include and utilize our different experiences and backgrounds in a good way. Your personality and engagement will be highly appreciated.   
What you will do
You aspire to be a member of the cooling system group and be responsible for the development of fluid components for combustion, electromobility and fuel cell vehicles.

Together with a team you will work as a global component owner for different fluid component such as coolant pump and valves. You will set technical requirement of components and together with your colleagues, our collaboration partners and suppliers develop components according to technical specifications and important features as for example sustainability aspects. You will be responsible through the whole chain from early development and portfolio strategies to maintenance. Meaning that you also are accountable for solving quality issues.

You will have daily collaborations with stakeholders connected to the components in scope. As for example projects, buyers, aftermarket, assembly, and suppliers.   
As part of our group and Base Engine you are also expected to take part in continuous improvements and support on other tasks when possible.  

Who are you?
We are looking for a person with great teamwork skills who enjoys developing yourself and your team, as well as interacting with colleagues and stakeholders. You have relevant experience from early component development to solving quality issues and can take responsibility for the whole chain. You have a positive mindset and a can-do attitude combined with good communication skills. You are analytical and know the importance of developing new technical products in a structured and organized way. You pay attention to details and can take necessary actions when required. You value an open and honest environment where trust enables high performing teams.

We believe you have the following knowledge and experience
•    You have a M.Sc. within Product Development or similar.  
•    You have experience from development of fluid components such as coolant pumps and valves giving you a good level of understanding component features. This includes understanding of system and requirements, component testing, technical documentation as well as technical negotiations with suppliers. 
•    Knowledge in mechatronics and understanding of SW and communication integration is also needed. 
•    Former experience from Volvo Group Trucks Technology (GTT) is an advantage.  
•    Basic knowledge in Creo is an advantage. 
We look forward to receiving your application!

If you have any questions, please get in touch: 
Lina Schäfer, Manager Cooling systems, [email protected]
Last application date: June 23rd.

We value your data privacy and therefore do not accept applications via mail. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
Vi har kollektivavtal och erbjuder ett friskvårdsbidrag på 4500 kronor årligen. En annan förmån hos oss är att du får en extra semesterdag för varje år du arbetar, upp till max 30 dagar. Dessutom kan du njuta av betald ledighet mellan jul och nyår varje år. Kanske är det en av anledningarna till det låga antalet medarbetare som slutar hos oss?
Vem är du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Maj 30    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
När det kommer till möjligheten att jobba remote är det helt upp till dig och kunden. På Uniso uppskattar vi att ses fysiskt men vi förstår om du vill jobba hemifrån någon dag emellanåt. De flesta av oss trivs bäst på plats, och vi värdesätter att vara ett starkt team som ses regelbundet.
Är det här du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Beräkningsingenjör till mindre konsultbolag

Ansök    Maj 28    Jobnet AB    Utvecklingsingenjör, maskin
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus. Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans. Ditt jobb på Uniso Du kommer att utföra beräkningar och analyser ... Visa mer
Är du en kommunikativ ingenjör med erfarenhet av mekanisk beräkning? Bli en del av oss på Uniso Technologies där delaktighet, gemenskap och utveckling står i fokus.
Uniso Technologies är ett konsultbolag baserat i Majorna i Göteborg. Nu söker vi dig en beräkningsingenjör som vill påverka din utveckling framåt och vara en del av en gemenskap där vi träffas regelbundet och har kul tillsammans.
Ditt jobb på Uniso
Du kommer att utföra beräkningar och analyser i olika kunduppdrag. Det kan handla om allt från att analysera och dimensionera svetsar eller andra förband i projekt inom industrin till att utforska nya lösningar för fordon, energi, kärnkraft, processindustri, marinteknik och medtech. Uppdragen kan ske både i team och på egen hand, beroende på projektets natur och kundens behov.
Våra kunder finns i alla möjliga branscher – vi jobbar med allt från tandimplantat till rymdraketer. Vårt mantra är att du är bäst på det du tycker är roligt och därför ger vi dig möjligheten att påverka dina uppdrag i den mån det går. Vi har alla olika behov och vill ge dig dina bästa förutsättningar för att utvecklas.
När det kommer till möjligheten att jobba remote är det helt upp till dig och kunden. På Uniso uppskattar vi att ses fysiskt men vi förstår om du vill jobba hemifrån någon dag emellanåt. De flesta av oss trivs bäst på plats, och vi värdesätter att vara ett starkt team som ses regelbundet.
Är det här du?
Vi söker dig som är beräkningsingenjör med åtminstone tre års erfarenhet av mekaniska beräkningar. Troligtvis har du läst maskinteknik och har en master inom applied mechanics från Chalmers eller annat universitet. Alternativt har du läst väg och vatten eller teknisk fysik, men viktigast är att du är väldigt intresserad av det vi gör på Uniso.
Det är viktigt att du har arbetat med mjukvaran ANSA och att du har erfarenhet av explicita analyser i LS-DYNA. Du behöver också kunna behärska svenska flytande.
Vi ser gärna att du är en kommunikativ person som lyssnar till kunden och har lätt för att ta in vad som är viktigt för respektive projekt. Vår förhoppning är att du trivs i ett sammanhang där god gemenskap och sammanhållning prioriteras, och där vi ser till att träffas fysiskt eller digitalt.
***
Ansök direkt genom en anonym lönematchning: https://jobnet.se/berakningsingenjor-uniso-technologies-goteborg?utm_source=arbetsformedlingen&utm_medium=annons&utm_content=uniso-technologies-goteborg&utm_term=berakningsingenjor
***
Rekryteringen sker via Jobnet.se där du även hittar bilder, förmåner och mer information om tjänsten och företaget. Visa mindre

Engineering Manager

Want to be part of transforming road freight – for good? Einride is showing the world a new way to move, based on the latest digital, electric and autonomous technologies. Through freight capacity as a service, we enable businesses around the world to accelerate towards their sustainability goals. Founded in 2016, Einride became the first company in the world to deploy a cab-less autonomous electric vehicle on a public road (Sweden, 2019). In 2022, we were... Visa mer
Want to be part of transforming road freight – for good? Einride is showing the world a new way to move, based on the latest digital, electric and autonomous technologies. Through freight capacity as a service, we enable businesses around the world to accelerate towards their sustainability goals.
Founded in 2016, Einride became the first company in the world to deploy a cab-less autonomous electric vehicle on a public road (Sweden, 2019). In 2022, we were the first to successfully operate such a vehicle on a US public road. Today our award-winning technology has been launched across 8 countries (and counting). Our clients are some of the world’s biggest shippers, including Fortune 500 companies.
We are looking for an energetic and deeply-technical software engineering manager, who is passionate about leading a team of experienced software and machine learning engineers and helps building up and maturing our autonomous driving software stack.
As Engineering Manager for the Machine Learning & Perception team at Einride Autonomous Technology, you will join our senior software leadership team and drive the AI capabilities of our Lidar-/camera- and radar-based perception stack. In this high-growth potential role you will have the opportunity to lead and drive change together with other ambitious, innovative and product-focused people who all challenge conventional thinking, think big, and aim high.
At Einride everyone is responsible for their work end to end, from development to production. As one of our central leadership team members, you will help us to improve developer happiness, foster our fearless development culture and lead by example.
You will:
Lead a spearheading team of perception algorithm and machine learning engineers
Significantly grow this team over this and coming years and select the best machine learning engineers for your team
Support the development of a fully AI-capable autonomous driving software stack and build up a strong machine learning footprint in Gothenburg and Stockholm
Own the software quality metrics and best engineering practices for your team

We expect you to:
Have deep practical experience in building a Lidar-/camera or radar-based perception stack
Bring production experience from robotics, robo-taxis or other autonomous vehicle domains
Have deep understanding and experience in developing machine learning algorithms for object detection, classification or labeling
Have significant hands-on experience in (embedded) software development of perception systems
Experience in Autonomous Driving stack development in the automotive domain is a big plus

This is a full-time position based in Gothenburg. We recommend that you submit your application as soon as possible since selection and interviews are held continually.
At Einride, we are innovators, building solutions the world has never seen before – but urgently needs. That’s why we take action, and it’s why we are always eager to be challenged. We know that our best innovations come from having a diverse mix of people, including those of different experiences, career paths, and walks of life. By coming together and sharing our perspectives openly – by disagreeing, discussing, and committing – we deliver greater impact. Visa mindre

Automotive design engineer

Som produktutvecklare hos oss kommer du att arbeta med både lokala och globala företag inom fordon. I din roll kommer du vara med att designa och utveckla produkter där många aspekter ska tas i beaktande, såsom formgivning, funktion, hållfasthet, material, tillverkningstekniker och reparerbarhet. Bredden i rollen gör att ena dagen inte liknar den andra och du kommer att ha många kontaktytor. Vad just ditt uppdrag kommer att handla om styrs av kundens behov... Visa mer
Som produktutvecklare hos oss kommer du att arbeta med både lokala och globala företag inom fordon. I din roll kommer du vara med att designa och utveckla produkter där många aspekter ska tas i beaktande, såsom formgivning, funktion, hållfasthet, material, tillverkningstekniker och reparerbarhet. Bredden i rollen gör att ena dagen inte liknar den andra och du kommer att ha många kontaktytor. Vad just ditt uppdrag kommer att handla om styrs av kundens behov, din kompetens men också av din personliga ambition och utvecklingsplan.


Kvalifikationer


BSc eller MSc inom produktutveckling/maskinteknik eller liknande
Erfarenhet av interiör och exteriöra system inom fordon
Catia V5 eller Creo är meriterande
Minst 3 års erfarenhet av av produktutveckling inom fordonsbranschen
Goda kunskaper i svenska och engelska, både i tal och skrift.



Som person är du nyfiken, driven och har ett genuint intresse för teknik och problemlösning. Du gillar omväxlande arbetsuppgifter och utmaningar i olika miljöer, då våra uppdrag förändras med tiden. Du arbetar ständigt med att utvecklas, både professionellt och som person. Visa mindre

Transmissions Ingenjör

Transmission-ingenjör inom fordonsindusrin Vad vi gör - och varför! FEV Sverige AB är medlem i FEV-koncernen och varit verksamma på den skandinaviska marknaden sedan 2006. FEV har mer än 7300 anställda världen över och utvecklar revolutionerande och effektiva drivsystem. FEV sammankopplar fordon med varandra och deras omgivning samt strävar efter att göra våra liv säkrare med hjälp av intelligenta system. Kort sagt kan FEV utveckla kompletta fordon från i... Visa mer
Transmission-ingenjör inom fordonsindusrin
Vad vi gör - och varför!
FEV Sverige AB är medlem i FEV-koncernen och varit verksamma på den skandinaviska marknaden sedan 2006. FEV har mer än 7300 anställda världen över och utvecklar revolutionerande och effektiva drivsystem. FEV sammankopplar fordon med varandra och deras omgivning samt strävar efter att göra våra liv säkrare med hjälp av intelligenta system. Kort sagt kan FEV utveckla kompletta fordon från idé till produktion och samtidigt leverera utrustningen för att testa de olika fordonskomponenterna. FEV i Sverige representerar vi FEV-gruppens kompetens på den nordeuropeiska marknaden och säkerställer att våra skandinaviska kunder har lokal tillgång till FEV:s globala kompetens.


Dina uppgifter
· Du kommer att ta rollen som en erfaren transmissions ingenjör vara placerad hos kund.
· Du kommer att arbeta med utveckling av växelväljare system samt ingående komponenter.
· Du kommer att arbeta med utveckling av systemen för synkronisering för växellådan samt komponenter.


Din profil
· Du har minst en Bachelor eller civilingenjörsexamen i maskinteknik / mechatronic.
· Du har erfarenhet av utveckling av växellådor för tyngre fordon.
· Har arbetat med utveckling av växelväljare och synkronisering
· Har 2D och 3D erfarenhet i CAD sytemet CATIA och Enovia
· Du är mycket motiverad att stödja utvecklingen av FEV på den skandinaviska marknaden genom att dela idéer och lyfta förbättringspunkter .


Vad vi erbjuder
· FEV Sverige AB erbjuder via sitt internationella nätverk projekt med tekniska utmaningar mot den globala marknaden av fordonstillverkare.
· Som ett litet företag inom ett multinationellt företag erbjuder vi dig en öppen och uppmuntrande arbetsmiljö att växa och utvecklas i, under arbetet med en mängd olika utmanande och intressanta globala projekt.
· FEV Sverige AB ansvarar för ingenjörs-, test- och testutrustningstjänster, därav ett brett spektrum av tekniska områden som erbjuder utvecklingsmöjligheter.
· Ett entreprenöriellt och entusiastiskt team, fokuserat på framtiden och nya (affärs)idéer. Visa mindre

Junior Systemverifieringsingenjör till Saab Surveillance

Tar du snartexamen inom maskinteknik/elektroteknik och vill arbeta i en praktiskt roll? Saab Surveillancesöker nu en nyexaminerad systemingenjör med intresse för integration och verifiering.Rollen är kopplad till ett talangprogram som ger dig den ultimata övergången mellan studier och arbetsliv. Att jobba som junior systemverifieringsingenjör påSaab Surveillance Till ett team på Saab söker vi nu en junior Systemverifieringsingenjör som tycker om mixen av a... Visa mer
Tar du snartexamen inom maskinteknik/elektroteknik och vill arbeta i en praktiskt roll? Saab Surveillancesöker nu en nyexaminerad systemingenjör med intresse för integration och verifiering.Rollen är kopplad till ett talangprogram som ger dig den ultimata övergången mellan studier och arbetsliv.
Att jobba som junior systemverifieringsingenjör påSaab Surveillance
Till ett team på Saab söker vi nu en junior Systemverifieringsingenjör som tycker om mixen av att både arbeta teoretiskt men också praktiskt. Du kommer att arbeta i hela kedjan där teamet arbetar med system.Som systemverifieringsingenjör kommer du att samordna och hjälpa till med demonstrationer och utprovning av ytradarprodukter, vilket inkluderar planering av flyg- och skjutprov, analys och tolkning av testdata/resultat samt rekommendera förbättringsåtgärder. Du kommer att arbetamed projektledning,för att ställa förväntningar och möta tidsfrister. Rollen innefattar även nära samarbetemed ingenjörsteam för att bygga lösningar för att tillgodose kundens behov.
Teamet som du kommer att vara del av integrerar och verifierar produkter, markbaserade såväl som sjöbaserade, tillhörande Product Unit Surface Radar Solutions i Göteborg samt hos våra kunder och/eller partners. Teamet stöder och underhåller system som finns i drift, samt demonstrerar våra produkters förmåga över hela världen.
Andra arbetsuppgifter kommer att vara:
Analysera krav och konstruktionsverifieringstester
Utföra formell verifiering och godkännande test tillsammans med kunder
Du utför också serviceaktiviteter hos kunder
Felsökning, verifiering och system förståelse
Stora delar av dina arbetsuppgifter är hands-on där du rör dig inom olika avdelningar inom Saab

Rollen är placerad i Göteborg men det kan förekomma resor inom tjänst.
Att vara konsult på Nexer Tech Talent
Nexer Tech Talent är specialister på att ge unga techtalanger den ultimata starten på arbetslivet. För denna roll kommer du att bli anställd av Nexer Tech Talent men arbeta hos Saab Surveillance i Kallebäck med start efter sommaren.Du kommer även att få ta del av ett skräddarsytt utbildningsprogram där du får möjlighet att utveckla och fördjupa dina tekniska kunskaper i områden som AI, Cloud och cybersäkerhet,men även inom tex. ledarskap och personlig utveckling.
Du kommer att coachas av en mentor hos Saabsamt en konsultchef på Nexer Tech Talent. Som konsult hos oss blir du väl omhändertagen och bjuds ofta in på gemensamma aktiviteter så som föreläsningar, afterwork och lunchträffar. Efter framgångsrikt genomförande av konsultuppdraget är intentionen att du erbjuds en anställning hos Saab.

Vi söker dig som:
Är i början av din karriär och har en kandidat/masterexamen inom maskin eller elektroteknik
Har ett intresse för problemlösning
Som person är du nyfiken och serviceminded
Du är målmedveten och tycker om att komma framåt i ditt arbete
Har goda kunskaper i svenska i såväl tal som skrift
Har goda kunskaper i Linux och Python är meriterande

För företag inom försvars- och säkerhetsindustrin i Sverige, kräver lagen att anställda som hanterar känslig information och teknologi ska vara svenska medborgare samt genomgå en säkerhetsprövning.
Ansökan
Låter detta som något för dig? Vi arbetar löpande med rekryteringen, så skicka in din ansökan snarast möjligt. Om du har du frågor eller funderingar är du välkommen att kontakta Tech Recruiter Johanna Norman på [email protected]
Vi ser fram emot att höra från dig!

Om Nexer Tech Talent
Nexer Tech Talent är en del av Nexer Group – ett techbolag med djupa rötter i svenskt entreprenörskap och innovation. Tillsammans är vi över 2500 medarbetare i 15 länder som i mer än 35 år hjälpt våra kunder att ligga steget före både strategiskt, teknologiskt och kommunikativt. Läs mer om Nexer Tech Talent här.

Om Saab
Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 19 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare, mer hållbar och mer rättvis värld. Saab är också ett möjligheternas företag. Ett företag där du som medarbetare får stort ansvar och goda utvecklingsmöjligheter. Men också ett företag som respekterar varje människas behov av ett liv utanför arbetet. Saab ser mångfald som en tillgång och ständigt lärande som en självklarhet. Tekniskt är de ledande inom många områden och en femtedel av våra intäkter går till forskning och utveckling. Visa mindre

EL/PLC Automation Engineer

On behalf of our client in Gothenburg we are looking for a EL/PLC Automation Engineer. You will be responsible for technical functions of electricals and software in the project. Responsibility The engineer secures the quality of the project regarding EL/PLC and automation aspect Review of the checklist before each checkpoint/milestone. EL/PLC automation related issues during concept work. Safety features related to EL/PLC automation to ensure functionalit... Visa mer
On behalf of our client in Gothenburg we are looking for a EL/PLC Automation Engineer.
You will be responsible for technical functions of electricals and software in the project.
Responsibility
The engineer secures the quality of the project regarding EL/PLC and automation aspect
Review of the checklist before each checkpoint/milestone.
EL/PLC automation related issues during concept work.
Safety features related to EL/PLC automation to ensure functionality and safety
Legal inspection is carried out and documented.
Follow-up of installations.
Technical issues are harmonized with other engineers within the department.
Project issues are coordinated with the shop representatives in the project team and the line organization in applicable cases.
Secure requirements regarding takeover of the EL/PLC automation area according to current routine.
Secure the EL/PLC functions as part of the complete project delivery.
Ensure that requirements regarding documentation for the discipline are included in RFQ.
Review technical content of the documentation and ensure that it meets the agreed level.
Contribute to the work with tool tree, review and approve.
Implement meetings with supplier and educate the supplier about standards, program structure and requirements for documentation so that the supplier understands what is to be delivered.
Secure Design Review Meeting, DRM* regarding EL/PLC. Control, safe PLC* code, HMI* and SCADA*.
Participate in risk analyses and Failure Modes Effects Analysis (FMEA*).
Involved in FAT*, SAT*, commissioning and function tests.
Coordinate/secure IT functions (software).
Coordinate/secure power supply and potential bonding.
Support electrical installation, solve electrical problems in design independently, modifying and updating electrical system diagram.
Responsibility for electrical safety in projects (incl. ATEX)


Area of responsibility
Electrical control cabinet design, system diagram, electrical circuit diagram, power supply.
Electrical components selection and determination of technical parameters.
Support electrical installation, solve electrical problems in design. Modifying and updating electrical system diagram.
PLC, HMI, SCADA, MES/IT system.


Competence Requirements
Machine directive 2006/42 EG and applicable harmonized SS EN ISO standards within area of expertise
Experience in SDB-Standard Data Base.
Basic cyber security understanding
Electrical hardware: Education and experience in electrical systems of industrial machines, Experience with safety components.
Reading/understanding Electrical drawings.
PLC programming: PLC programming experience shall include Siemens Step7 and TIA Portal, integrated safety, WinCC (advanced).



This is a full-time consultancy position in Gothenburg. Visa mindre

Testingenjör

För vår kund söker vi en Testingenjör med Fordonserfarenhet. Beskrivning av uppdragsgivaren: Vår kund driver världens första fullskaliga testmiljö för framtida trafiksäkerhet. Vad som är unikt med anläggningen är att de olika trafikmiljöerna gör det möjligt att testa avancerade säkerhetssystem och deras funktioner för alla typer av trafik- och trafiksituationer. Detta möjliggör forskning, utveckling och certifiering av framtida trafiksäkerhetssystem och ... Visa mer
För vår kund söker vi en Testingenjör med Fordonserfarenhet.

Beskrivning av uppdragsgivaren:

Vår kund driver världens första fullskaliga testmiljö för framtida trafiksäkerhet. Vad som är unikt med anläggningen är att de olika trafikmiljöerna gör det möjligt att testa avancerade säkerhetssystem och deras funktioner för alla typer av trafik- och trafiksituationer. Detta möjliggör forskning, utveckling och certifiering av framtida trafiksäkerhetssystem och fungerar som en internationell arena öppen för fordonstillverkare, leverantörer, lagstiftare, universitet och högskolor från hela världen.

Beskrivning av uppdrag:

Vår kund söker en testingenjör med fordonserfarenhet. Kunden ser att personen är ansvarstagande, gillar problemlösning och har en positiv attityd. Placering för uppdraget är på Lindholmen i Göteborg, men en del tid kommer även att vara i Torslanda och i bil på allmän väg.

Rollbeskrivning:

Personen kommer ingå i ett team med uppdrag mot externa kunder där vår kund ansvarar både funktionsutveckling samt verifiering av aktiva säkerhetssystem. Rollen innebär ansvar för att förbereda och utföra olika typer av test i bil samt analysera och dokumentera resultat och supporta funktionsägare och utvecklare i det kontinuerliga arbetet med att utveckla produkten. Vår kund ser att du är ansvarstagande, gillar problemlösning och har en positiv attityd.

Obligatoriska krav:

Personen ska ha en BSc. Eller MSc. inom relevant område
Personen ska ha arbetat minst 1-5 år som testingenjör inom fordonsindustrin
Personen har erfarenhet av CANoe, CANalyzer samt logg- och diagnosverktyg för bilar.
Personen ska ha svenskt B-körkort samt god körvana.
Personen ska ha god analysförmåga samt förståelse och erfarenhet av Matlab samt ansvarstagande för att färdigställa sina uppgifter.


Mervärdeskrav:

Personen har kunskap och erfarenhet inom programmering i språk som Python eller C++.
Personen har erfarenhet av att arbeta med HIL-testning.
Personen har ett generellt starkt intresse av bilar.


Din ansökan

Låter rollen intressant och passande? Ansök i så fall omgående för vi intervjuar löpande och rollen kan tillsättas innan sista ansökningsdatum.

Vi kan enbart ta emot och bearbeta din ansökan genom att du registrerar ditt CV i vår portal. Med avseende på GDPR kan vi ej ta emot ansökningar via e-post. Varmt välkommen med din ansökan! Uppdraget är en del av Quest Consulting personaluthyrning.

Om oss

Quest Consulting är ett auktoriserat konsultbolag med kollektivavtal, försäkringar, friskvård och tjänstepension. Vi är specialiserade inom IT, Teknik, HR, Administration och Ekonomi. Vår målsättning är att vara din personliga samarbetspartner och just därför är det så viktigt för oss att arbeta efter våra kärnvärden där våra ledord är att vara Personliga, Nyskapande och Professionella. Visa mindre

Design Engineers

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit Design Engineers. General requirements: Design experience in surface modeling with Catia V5/V6 At least 4 years of experience in development for automotive market Great engineering judgment Knowledge of GD... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit Design Engineers.

General requirements:
Design experience in surface modeling with Catia V5/V6
At least 4 years of experience in development for automotive market
Great engineering judgment
Knowledge of GD&T
Interpersonal and communication skills
Ability to write clear and comprehensive technical documentation and reports - self-organized.
Experience in PLM
Professional level of English

Responsibilities
Creating 3D models, assemblies and 2D drawings using Catia V6 Support the release of product into production (PLM)
Ensuring that products meet compliance regulations
Organize and carry out tests to verify component function and requirements
Technical support leading to successful introduction into production
Estimating cost and time scopes for each part
Interaction with suppliers and technology providers
Collaborating with technical leads and other engineers in and outside of the team

Advantages:
Experience with the design of CFRP and upholstery products would be an advantage
Experience with Tooling design would be an advantage.
Experience in Monitor ERP system

If you are passionate about bringing innovation to the projects you work on then we would love to hear from you.
Tata Technologies: Make it real. Make it Better™.

Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Laboratory Development Engineer - Automation & Simulation

Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transpo... Visa mer
Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

This is us, your new colleagues
Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, maintenance, and development of heavy-duty drivelines testing (engine, transmission, electromobility and Fuel Cells/Hydrogen) and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility. We cooperate close with product owners, technology owners, certification, and compliance as well as other functions. We have test facilities and laboratories where a mix of theory and practical work is necessary to deliver and develop within present and new technologies. VT&MT; is a part of Powertrain Engineering, Volvo Group Trucks Technology (GTT) located in Gothenburg. You will be part of the method and technical development team with different expertise areas (software, emissions, measurements, electronics, fluids, mechanical etc.). All work together with one target: To develop world-class test facilities and methods.

About the role
As a Laboratory Development Engineer, you will lead and deliver various development activities, where creativity, quality and flexibility are of prime importance and keys to success. You will be the technical advisor in our development projects for automation and simulation requirements. You will work in tight cooperation with Volvo test and verification engineers, maintenance and operation engineers, project managers, suppliers, and subcontractors. You will act as a mentor on the technical equipment and methods used in the lab and support teams with advice and educational courses. You will also balance your time between office work and work in the lab.

Scope of your mission
To develop your specialist knowledge, drive, and lead development to create sustainable solutions, strategies & methods within test cell automation and simulation activities. For example:
* Develop expert knowledge of our automation systems used in the test cells.
* Work with simulation models and integrate them with test objects in the test cell, either to simulate the remainder of the truck or serve as a digital twin for the test object.
* Develop new test sequences in the automation systems (involves programming to a certain level).
* Define automation systems requirements on new test cell investments.
* Improve working methodology related to automation systems in test cells.
* Support in test cells on automation systems topics.


Who are you?
We believe that you are a flexible person with a positive mindset and can-do attitude. You love to inspire, develop, and motivate your colleagues and yourself, building relationships on a local and global level. With your team spirit, you want to be an important team player, putting the team in first place, ready to do what is needed to make the team more efficient. Strong action will make you take own initiatives when something needs to be done or improved and do that with enthusiasm and high energy.
Requirements:
* University degree in Computer Science, Automation and Mechatronics or equivalent education/experience.
* Experience from being responsible for defining state-of-the-art technology and identifying future trends, as well as driving innovation of new solutions and concepts.
* Skills and experience in programming, e.g., Python, C# or similar.
* Experience in using simulation tools, like MATLAB and Simulink (basic level).
* Holistic view and analytical ability to understand future testing demands, coordinate & synchronize testing demands into plans (test facility road map).
* English proficiency (verbal and written) – Swedish is a merit!


We highly value the experience within the area of automotive testing activities, in product development, test engineering or lab development.

Number of positions: 2
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. Visa mindre

Senior Vehicle Support

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do

At Electrical Engineering Implementation support our mission is to give support to the projects with their test vehicles within the Physical project build process. We provide this based on our broad, deep and solid knowledge both of the traditional and the distributed Electrical system. This in combination with genuine complete truck and Volvo systems knowledge makes us an outstanding partner in a variety of EEE projects. We are now looking for a Vehicle Support Engineer, Electrical Engineering!

Your main tasks as a  vehicle support engineer is to support the vehicle fleet with fault tracing and software download. You will also support early phase Electrical Engineering, software downloading/programming and parameter setting of ECUs, trouble shooting of complex problems in physical truck environment. The role includes a considerable amount of work in different Volvo facilities both inside and outside office / workshops and includes hands-on work on trucks. When working at Electrical Engineering implementation support you will have the opportunity to travel and meet both dealers and end users.

To be able to take on this assignment we think you have experience from working with electrical and electronics in vehicles and also have a good understanding of vehicle electrical architecture. Preferable you have a complete truck knowledge and with the complete vehicle perspective to be able to understand the product as an end user.

As a person, you are driven, innovative and you have a strong customer focus and a service minded attitude. We believe that you can work independently and take initiatives. It is important to be proactive! You are also good at problem analysis and have a problem-solving oriented mindset. You have a structured way of working and the flexibility to work with a wide range of tasks. You enjoy teamwork, contribute with team spirit and you like taking responsibility.

Qualifications:
You have a university degree in electronics, mechatronics or similar. We consider experience from product development and knowledge in CANalyser, Kola, PROTOM,Configurator as a merit. It is an advantage if you have mechanical skills. You should have a driving license C or a plan to have one and have good communication skills in English, both spoken and written.

Send your application as soon as possible. Interviews will be made on a continuous basis. Last application date is 22 of February.

We’d love to hear from you so don’t hesitate to reach out to us if you have any questions! Please contact Joakim Corneliusson, Group Manager, [email protected].



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Senior Global Component Responsible

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Applying to this jo... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.
At Powertrain Engineering you will contribute to the transformation of our company, the transport industry and society at large!
What you will do

In your role as Global Component Responsible, you will be leading the development of components on the fuel injection system, together with our suppliers and as part of the cross functional team that includes Purchasing, Operations and After Market. You will be involved in the complete lifecycle of the components, from early development phase to industrialization and finally maintenance. With the Volvo Group ambitious decarbonization goals, improvements and new solutions are required on the fuel injection system to make sure it can operate with new and alternative fuels smoothly. You will take part in that exciting journey!

Your future team
We are the Fuel Injection Equipment group, or short FIE. Our group is made of 10 engineers from 4 different countries. We enjoy cooperating within the team as well as globally with our colleagues in Brazil, USA, France and Bangalore. We are ambitious but we also believe in having fun at work and therefore an engaging work environment is highly important to us!

Who are you?

Do you dream big? We do too, and we are excited to grow together!
In this role, we are looking for someone who has the ability to lead a cross-functional team, secure the deliveries in time and with the expected quality within your scope. Further, we see that it is important that you have a positive attitude and the ability to interact, network and cooperate effectively within our organization as well as externally with suppliers and other partners. You are a driven person, who enjoys drawing conclusions, delivering results and with an interest in improving work methods. Knowledge sharing within engine development regarding cross functional work, supplier management and project management is highly appreciated.

In order to succeed in this role we believe you have the following knowledge and experience:
•    Master of Science or similar technical education.
•    Fluent in English, written and spoken.
•    Previous experience of Product Development (3-5 years)
•    Previous experience with ICE development is a merit
•    Knowledge on Volvo Group tools (KOLA, PDMLink, etc) is a merit


What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy: 
A diverse workplace with colleagues from different backgrounds and parts of the globe and you will interact daily with other colleagues from the other sites. You will be given opportunities to develop yourself and to grow within Volvo. At FIE we are working in the office, where you will find a nice atmosphere and great collaboration between the team members.

Ready for the next move?

The transportation business is going through a transformation journey and we look forward for you to bring your skills and ideas to support us with this challenge. If you are excited to be part of the journey, apply today and we will be in touch soon! 

Group manager Fuel Injection Equipment: Felipe Roseira: [email protected].

We value your data privacy and therefore do not accept applications via mail. Visa mindre

Senior Development engineer EATS

"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity. Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm." Tr... Visa mer
"Founded in 1927, the Volvo Group is committed to driving prosperity and shaping the future landscape through sustainable transport, mobility, and infrastructure solutions. By offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase our customers’ uptime and productivity.

Our headquarters are in Gothenburg, Sweden. Volvo Group shares are listed on Nasdaq Stockholm."

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 

What you will do


The Exhaust Aftertreatment System (EATS) department within Powertrain Engineering Sweden is responsible for the global platform development of exhaust after treatment systems for Volvo Group’s different products around the world. We are about 90 passionate and highly skilled engineers on a mission to reduce the environmental impact of global transportation.
To our Hardware Components Group we are now seeking a Senior Development engineer to the EATS muffler team.  As a Senior Development engineer, you will work with the mechanical HW component development, vehicle installation, product documentation and testing & verification of the complete EATS muffler. The EATS muffler is a very complex product with many integrated functions. You will in this position have the possibility to learn and work in a broad range within the mechanical engineering domain such as materials, mechanical integrity, noise, gas flow and mixing properties, thermal etc. The daily work will be performed in a small team in close collaboration with other functions internally and external suppliers. You will be involved in all different development stages from early concept development to industrialization and product maintenance.

Your future team
You will be part of a dedicated team of 5 people where we support each other and solve things together. The team consist of the full range from Senior experts to newly graduated engineers with diversity in age and nationality. 


Who are you?


We believe that our new colleague has the passion for product development and the drive for learning new things every day at work. You are also a person that resolves issues as they arise and acts with a clear sense of ownership. In addition, we believe that you could interact, network, and collaborate efficiently with peers.

Required qualifications:
•    MSc. or BSc. or similar in Mechanical engineering
•    Experience from powertrain or vehicle development
•    Good collaboration skills
•    Good verbal and written communication skills in English


What’s in it for you?

At powertrain engineering you will have great opportunities to develop and grow your competence as an engineer. We also value and care about people’s wellbeing and work life balance. Flexibility with regards to work week arrangements will be possible for this position.

Ready for the next move?

If you want to make a real impact in your career, the transportation business is where you want to be. We look forward to meeting you.



Looking forward to your application!
For further questions please contact: Martin Pramås, Group Manager EATS Hardware components: [email protected]

We value your data privacy and therefore do not accept applications via mail. 

Last application date: March 15th, 2024.

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Senior Global Component Responsible

Who we are and what we believe in  Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Applying to this jo... Visa mer
Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.
At Powertrain Engineering you will contribute to the transformation of our company, the transport industry and society at large!
What you will do

In your role as Global Component Responsible, you will be leading the development of components on the fuel injection system, together with our suppliers and as part of the cross functional team that includes Purchasing, Operations and After Market. You will be involved in the complete lifecycle of the components, from early development phase to industrialization and finally maintenance. With the Volvo Group ambitious decarbonization goals, improvements and new solutions are required on the fuel injection system to make sure it can operate with new and alternative fuels smoothly. You will take part in that exciting journey!

Your future team
We are the Fuel Injection Equipment group, or short FIE. Our group is made of 10 engineers from 4 different countries. We enjoy cooperating within the team as well as globally with our colleagues in Brazil, USA, France and Bangalore. We are ambitious but we also believe in having fun at work and therefore an engaging work environment is highly important to us!

Who are you?

Do you dream big? We do too, and we are excited to grow together!
In this role, we are looking for someone who has the ability to lead a cross-functional team, secure the deliveries in time and with the expected quality within your scope. Further, we see that it is important that you have a positive attitude and the ability to interact, network and cooperate effectively within our organization as well as externally with suppliers and other partners. You are a driven person, who enjoys drawing conclusions, delivering results and with an interest in improving work methods. Knowledge sharing within engine development regarding cross functional work, supplier management and project management is highly appreciated.

In order to succeed in this role we believe you have the following knowledge and experience:
•    Master of Science or similar technical education.
•    Fluent in English, written and spoken.
•    Previous experience of Product Development (3-5 years)
•    Previous experience with ICE development is a merit
•    Knowledge on Volvo Group tools (KOLA, PDMLink, etc) is a merit


What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy: 
A diverse workplace with colleagues from different backgrounds and parts of the globe and you will interact daily with other colleagues from the other sites. You will be given opportunities to develop yourself and to grow within Volvo. At FIE we are working in the office, where you will find a nice atmosphere and great collaboration between the team members.

Ready for the next move?

The transportation business is going through a transformation journey and we look forward for you to bring your skills and ideas to support us with this challenge. If you are excited to be part of the journey, apply today and we will be in touch soon! 

Group manager Fuel Injection Equipment: Felipe Roseira: [email protected].

We value your data privacy and therefore do not accept applications via mail. Visa mindre

Mechanical Design Engineer

Ansök    Dec 18    DREV AB    Utvecklingsingenjör, maskin
Mechanical Design Engineer Full-Time Apply by January 14th, 2024 About DREV At DREV we are providing cutting-edge contamination control solutions for the battery industry and its value chain. Our innovation boosts production efficiency, ensures workplace safety, and upholds employee health, championing sustainability. DREV's unique strength lies in our effective and safe contamination solutions, particularly for battery manufacturing and recycling, where c... Visa mer
Mechanical Design Engineer
Full-Time
Apply by January 14th, 2024
About DREV
At DREV we are providing cutting-edge contamination control solutions for the battery industry and its value chain. Our innovation boosts production efficiency, ensures workplace safety, and upholds employee health, championing sustainability. DREV's unique strength lies in our effective and safe contamination solutions, particularly for battery manufacturing and recycling, where current technologies fall short. Our company is growing fast, and we are continuously looking for new colleagues who can thrive in an innovative, fast-moving, and friendly work environment.
We will now expand our team with a Mechanical Design Engineer.
Your Role
Performing daily tasks involves developing and designing comprehensive solutions that address diverse technical requirements across multiple disciplines, encompassing mechanical, electrical, and chemical aspects. The primary focus is ensuring manufacturability, ease of assembly, and maintainability. This necessitates the effective balancing and integration of the varied needs of stakeholders, with a willingness to propose well-considered compromises when necessary to achieve optimal outcomes. A key aspect of the daily routine is constantly exploring innovative problem-solving approaches, aiming to identify and implement improvements throughout the entire development process—from conceptualization and prototyping to validation. This dynamic approach ensures a continuous evolution of methodologies and strategies, contributing to the long-term advancement of the projects and objectives at hand.


Specifically, the role entails engaging in hardware development and integration within contamination control systems for the battery supply chain. This involves meticulously selecting and validating components and materials to guarantee the system's robustness and efficiency.
Qualifications
Engineering education in Mechanical Engineering or related field.
Minimum two years experience in mechanical design/construction or similar.
Proficiency in CAD software (SolidWorks, AutoCAD, etc.).
Strong understanding of mechanical principles and materials.
Basic knowledge of technical drawings and requirements
Some practical workshop experience is considered an advantage.



Personal Qualities
Excellent problem-solving and communication skills.
Self-sufficient and curious.
Willing to ask for help when you do not understand or need help.
Structured and systematic.
Eager to continue learning and developing.
Open to change, as this is a fast-paced environment where priorities and responsibilities sometimes change quickly.



What We Offer
Exciting and challenging projects that push the boundaries of innovation.
Mentorship from experienced engineers to accelerate your professional growth.
A vibrant and inclusive work culture that values diversity and creativity.
Competitive salary and benefits package.



How to Apply
If you are ready to take your mechanical design skills to the next level, send your resume and a cover letter highlighting your relevant experience to [email protected]. Please use the subject line "Mechanical Design Engineer". Visa mindre

Software Integration Function Test Engineer to client in the motor industry

Arbetsbeskrivning Are you passionate about shaping the future of product development and engineering? Do you thrive in a dynamic and agile work environment? Tata Technologies Nordics AB is seeking a Software Integration Function Test Engineer to join their team, Tata Technologies Nordics AB are leaders in designing, engineering, and validating innovative products. If you have a background in software system development and testing, familiar with SAFe and A... Visa mer
Arbetsbeskrivning
Are you passionate about shaping the future of product development and engineering? Do you thrive in a dynamic and agile work environment? Tata Technologies Nordics AB is seeking a Software Integration Function Test Engineer to join their team, Tata Technologies Nordics AB are leaders in designing, engineering, and validating innovative products. If you have a background in software system development and testing, familiar with SAFe and Agile methodologies, and possess a Swedish driver's license with good driving experience, then this open position is perfect for you.

As a Software Integration Function Test Engineer, your primary responsibilities will include:
• Conducting function tests in Complete Vehicle, involving significant hands-on interaction with test objects and cars.
• Ensuring the proper functionality of customer features in the car when a complete software baseline is updated.
• Operating within an agile workflow and contributing to the SW Function Integration team's testing efforts.
• Analyzing test results and reporting any deviations to the integration leader.
• Collaborating with the Nod SW responsible to gain a comprehensive understanding of deviations.
• Performing on-site testing at the customer site in Torslanda and remotely analyzing test results.


Din Profil
To be successful in this role, you should have:
• Experience with SAFe and Agile methodologies.
• A Swedish driver's license and a strong driving background.
• Proficiency in software system development and testing.
• Knowledge of vehicle development processes.
• Completion of the Hällered Driving Education program, preferably T2 or T3.
• Fluent in English, both spoken and written.

Om företaget
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.

Tata Technologies: Engineering a better world.



Kontaktuppgifter
Questions about the position are answered by responsible recruiter Felix Taylor at [email protected].

We look forward to receiving your application! Visa mindre

Produktspecialist - CAD & Mek

Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar? Ansök nu! Ta steget mot en spännande karriär hos Sesami Cash Management Technology Nordic AB! Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar? Vi letar efter en passionerad individ som triggas av utmaningar och är redo att ta rollen som vår nästa Produktspecialist. Varför Sesami? Hos os... Visa mer
Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar?
Ansök nu!
Ta steget mot en spännande karriär hos Sesami Cash Management Technology Nordic AB!
Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar? Vi letar efter en passionerad individ som triggas av utmaningar och är redo att ta rollen som vår nästa Produktspecialist.
Varför Sesami?
Hos oss möts du av en dynamisk arbetsmiljö där vi fokuserar ständigt på produktsäkerhet. Vår globala närvaro sträcker sig över hela världen, och vi är stolta leverantörer av innovativa och säkra lösningar inom kontanthantering till företag i världsklass. Vi strävar efter att skapa en arbetsplats som inte bara är trevlig utan också flexibel och stabil, med förmåner skräddarsydda för våra anställda.
Din roll hos oss:
Som Produktspecialist kommer du att spela en nyckelroll där du stöttar projekt, hanterar dokumentation och säkerställer att våra produkter är på topp. Din passion för att lösa problem och din tekniska expertis kommer att vara centrala när du skapar monteringsinstruktioner, testar nya designlösningar och fungerar som det tekniska gränssnittet med vår externa produktion.
Din profil:
Vi värdesätter initiativtagande och problemlösningsförmåga mer än formell utbildning. Vi söker dig som är självgående, strukturerad och nyfiken, med en passion för mekanik och konstruktion. Din förmåga att samarbeta och kommunicera effektivt på både svenska och engelska är av stor vikt för oss.
Krav och meriter:
Vi ser gärna att du har minst 3 års erfarenhet inom liknande roller och en stark passion för mekanik. Erfarenhet av produktionsteknik och kunskap i CAD och PDM-system är meriterande. En teknisk ingenjörsexamen eller erfarenhet av sedel/mynt-hanteringssystem är ett extra plus.
Om positionen:
Det här är en heltidsanställning enligt kollektivavtal. Reguljära resor till våra andra enheter eller leverantörer kan förekomma. Tillträde enligt överenskommelse och vi strävar efter att fylla rollen så snart som möjligt.
Sesami Cash Management Technology Nordic AB är platsen för dig som söker en utmaning, vill utvecklas och vara en del av något stort. Om du tror att du är den vi letar efter, väntar vi ivrigt på din ansökan!
Ansök nu och vara med och forma framtiden för säker kontanthantering!
Om Sesami
Sesami Cash Management är verksamt över hela världen och finns i mer än 25 länder. Vår tillverkning finns i Europa, Asien och Amerika. Vi levererar automatiska kontanthanteringslösningar, mjukvara och tjänster för kunder inom detaljhandel, banker, värdetransportörer och finansbolag över hela världen.
Genom vårt erbjudande, skapar vi en effektivare och säkrare kontantprocess och minskar kostnaderna för hanteringen av sedlar och mynt genom hela cykeln.
Trygghet för våra kunder och betalningsfrihet för slutkunden. Visa mindre

147531BR - Simulation Engineer – Virtual Vehicle Energy Lab

Are you ready to make electrifying connections? Help us to design sustainable transportation solutions for the future. As part of the team, you’ll help us accelerate our journey by engineering exciting next-gen technologies with a global reach. Be part of our evolution as we strengthen our team. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Shaping tomorrow’s technology ... Visa mer
Are you ready to make electrifying connections? Help us to design sustainable transportation solutions for the future. As part of the team, you’ll help us accelerate our journey by engineering exciting next-gen technologies with a global reach. Be part of our evolution as we strengthen our team. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact.


Shaping tomorrow’s technology


At SAFE & EFFICIENT DRIVING, we are committed to revolutionizing the way vehicles consume energy and reducing our global carbon footprint.
Our innovative software solutions are designed to minimize energy consumption and support customers to optimize operation, making transportation greener and more efficient.


Roles and Responsibilities


The Vehicle Energy Management organization is based in Gothenburg and its main responsibility is to maximize energy efficiency of vehicle transports. This includes the development of advanced onboard control of vehicle systems as well as offboard service enablers related to vehicle energy. An important aspect of this work is to be able, through data analytics and simulation, to replicate relevant road and usage conditions of our products. By creating a structured workflow from real data to simulation supporting all different truck drivelines we can support the development of digital services, onboard control, sales tools, verification and validation among many other aspects, to that we give the name Virtual Vehicle Energy Lab.


As a simulation engineer, you will focus on simulating vehicles and their sub-systems with a focus on maximizing energy efficiency in relevant operation conditions. Your key responsibilities will be:
Define relevant usage conditions of trucks for different markets
Validation and verification of advanced energy-saving functions (on-board and off-board)
Synchronize solutions for all propulsion concepts and fuels
Design digital services capabilities

You will report to the manager of the Vehicle Energy Management Functions


How to succeed


You are a passionate, professional with eyes on the horizon and feet on the ground. You have experience in the fields of control, simulation, and data analytics. You know what aspects affect energy usage on trucks and how to affect them. You enjoy being part of a high-performing team and actively participate in strategy and execution. You share your opinions and take ownership of your work.


You have a relevant university degree or similar and an excellent proficiency in English. Networking in a global multi-culture organization across all the Volvo Group brands comes naturally. You dare to challenge and take evaluated risks when necessary and you find energy in working in a changing environment as you contribute to driving the global shift in the transport and infrastructure industry.


Other qualifications:
Master’s degree in Engineering in a relevant field
Extensive Product Development experience
Energy simulation and data analytics experience
Understanding customer needs and how our products are used
Fluency in English, verbal and written

What We Offer:
Opportunity to work on cutting-edge technology and make a meaningful impact on the environment.
Collaborative and supportive work environment, with opportunities for career growth and advancement.
Modern and comfortable office space, with access to state-of-the-art tools and resources.

If you're a forward-thinking professional with a passion for sustainability and innovation, we'd love to hear from you! Apply now to join our team and help us revolutionize the way trucks consume energy.


We look forward to reviewing your application.


Contacts: Rafael Klüppel Smijtink, Group Manager Vehicle Energy Management Functions, [email protected]


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Manufacturing Simulation Engineer

For our client in Gothenburg we are looking for a Manufacturing Simulation Engineer. Description As a Manufacturing Simulation Engineer, you will be a part of a commodity engineering team and will perform analysis of alternative manufacturing scenarios by different types of simulation models. You will develop new Body Green Field processes or update Brown Field areas. You will answer questions in fields ranging from station to factory level to ensure a pro... Visa mer
For our client in Gothenburg we are looking for a Manufacturing Simulation Engineer.
Description
As a Manufacturing Simulation Engineer, you will be a part of a commodity engineering team and will perform analysis of alternative manufacturing scenarios by different types of simulation models. You will develop new Body Green Field processes or update Brown Field areas. You will answer questions in fields ranging from station to factory level to ensure a process-driven product development, with focus on production-effective product solutions.


This in an environment of both highly Automated Production as well as in more Manual stations/lines. Advanced manufacturing simulation tools are used by the engineer and it has progressed to the point where most of the design verification is done using computer simulations rather than physical prototypes. It encompasses simulation, validation and optimization of products and manufacturing systems.
The role is a major provider of information to support manufacturing engineering team in process development.
Qualifications:
Bachelor of Science Production Engineering or Systems, preferably Master of Science
Industrial or academic experience in CAE/robotic simulation tools will be highly valued
Experience or knowledge about joining methods used in Body in White processes.
Experience in 3D IT tools
Fluent in English, written and spoken.

Today our main tools are Process Simulate, Process Designer, Manufacturing Process Planner, NX Line designer, CATIA V5, AutoCAD. Skills in Ergo simulation and balancing tools are highly valued.
This is a full-time consultancy position onsite in Gothenburg. Visa mindre

Component Engineer - Combustion Engine

Are you passionate about pushing the boundaries of combustion engine technology? Here you have the chance to be part if a leading global provideer of propulsion technology! About the position As Component Engineer with in base engine you will coordinate and lead the work within your area of responsibility, to reach the objectives and secure the deliveries within the given technical requirements, time and budget. Most likely you will be responsible of bala... Visa mer
Are you passionate about pushing the boundaries of combustion engine technology? Here you have the chance to be part if a leading global provideer of propulsion technology!

About the position
As Component Engineer with in base engine you will coordinate and lead the work within your area of responsibility, to reach the objectives and secure the deliveries within the given technical requirements, time and budget. Most likely you will be responsible of balance shafts and parts of the oil system.

Your responsibilities will include:
• Develop base engine components in collaboration with suppliers.
• Review technical solutions proposed by suppliers.
• Release technical documentation (Drawings, 3D-models, Technical specifications, etc.).
• Initiate and oversee validation processes to ensure components meet specifications.
• Implement corrective actions when deviations occur.
• Communicate project status and forecasts to both project and line organizations.

Qualifications
• University degree in engineering or equivalent based on work experience.
• Experience in automotive development.
• Proficient in English, both spoken and written.
• Documented experience with CATIA V5 and Teamcenter.
• Genuine interest in combustion engines and EDU.
•  You are fluent in English, both written and spoken and knowledge of Swedish is meritorious.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Sima Bahho at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in our journey to revolutionize the world of automotive engineering. Apply now to be a part of our dedicated team!
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Combustion engine | EDU l Propulsion Technology | CatiaV5 | Teamcenter | Automotive | Adecco | Göteborg Visa mindre

Sesami Cash Management Technology Nordic AB - Produktspecialist

Ta steget mot en spännande karriär hos Sesami Cash Management Technology Nordic AB! Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar? Vi letar efter en passionerad individ som triggas av utmaningar och är redo att ta rollen som vår nästa Produktspecialist. Varför Sesami? Hos oss möts du av en dynamisk arbetsmiljö där vi fokuserar ständigt på produktsäkerhet. Vår globala närvaro sträcker sig öv... Visa mer
Ta steget mot en spännande karriär hos Sesami Cash Management Technology Nordic AB!

Är du redo för en unik möjlighet att bli en del av den ledande kraften bakom säkra kontanthanteringslösningar? Vi letar efter en passionerad individ som triggas av utmaningar och är redo att ta rollen som vår nästa Produktspecialist.

Varför Sesami?

Hos oss möts du av en dynamisk arbetsmiljö där vi fokuserar ständigt på produktsäkerhet. Vår globala närvaro sträcker sig över hela världen, och vi är stolta leverantörer av innovativa och säkra lösningar inom kontanthantering till företag i världsklass. Vi strävar efter att skapa en arbetsplats som inte bara är trevlig utan också flexibel och stabil, med förmåner skräddarsydda för våra anställda.

Din roll hos oss:

Som Produktspecialist kommer du att spela en nyckelroll där du stöttar projekt, hanterar dokumentation och säkerställer att våra produkter är på topp. Din passion för att lösa problem och din tekniska expertis kommer att vara centrala när du skapar monteringsinstruktioner, testar nya designlösningar och fungerar som det tekniska gränssnittet med vår externa produktion.

Din profil:

Vi värdesätter initiativtagande och problemlösningsförmåga mer än formell utbildning. Vi söker dig som är självgående, strukturerad och nyfiken, med en passion för mekanik och konstruktion. Din förmåga att samarbeta och kommunicera effektivt på både svenska och engelska är av stor vikt för oss.

Krav och meriter:

Vi ser gärna att du har minst 3 års erfarenhet inom liknande roller och en stark passion för mekanik. Erfarenhet av produktionsteknik och kunskap i CAD och PDM-system är meriterande. En teknisk ingenjörsexamen eller erfarenhet av sedel/mynt-hanteringssystem är ett extra plus.

Om positionen:

Det här är en heltidsanställning enligt kollektivavtal. Reguljära resor till våra andra enheter eller leverantörer kan förekomma. Tillträde enligt överenskommelse och vi strävar efter att fylla rollen så snart som möjligt.

Sesami Cash Management Technology Nordic AB är platsen för dig som söker en utmaning, vill utvecklas och vara en del av något stort. Om du tror att du är den vi letar efter, väntar vi ivrigt på din ansökan!

Ansök nu och vara med och forma framtiden för säker kontanthantering!

Om Sesami

Sesami Cash Management är verksamt över hela världen och finns i mer än 25 länder. Vår tillverkning finns i Europa, Asien och Amerika. Vi levererar automatiska kontanthanteringslösningar, mjukvara och tjänster för kunder inom detaljhandel, banker, värdetransportörer och finansbolag över hela världen.

Genom vårt erbjudande, skapar vi en effektivare och säkrare kontantprocess och minskar kostnaderna för hanteringen av sedlar och mynt genom hela cykeln. Trygghet för våra kunder och betalningsfrihet för slutkunden. Visa mindre

Simulation and Analysis Engineer

Join our dedicated team of professionals as we shape the future of powertrain technologies for the automotive industry and beyond! Role description As a Simulation and Analysis Engineer, you will be a key contributor to the mission of re-imagining motion for the future. Your responsibilities: • Conducting in-depth analysis of systems and components exposed to high temperatures and vibrations. • Utilizing industry-leading simulation tools, primarily ABAQ... Visa mer
Join our dedicated team of professionals as we shape the future of powertrain technologies for the automotive industry and beyond!

Role description
As a Simulation and Analysis Engineer, you will be a key contributor to the mission of re-imagining motion for the future.

Your responsibilities:
• Conducting in-depth analysis of systems and components exposed to high temperatures and vibrations.
• Utilizing industry-leading simulation tools, primarily ABAQUS and NASTRAN, with a strong focus on pre-processing using ANSA.
• Presenting analysis findings through both verbal communication and comprehensive written reports, including actionable conclusions and recommendations.
• Taking ownership of effective communication within the team and across departments.

About you
• Master´s degree in Mechanical Engineering with a focus on Applied Mechanics.
• Extensive experience in using ANSA, and proficiency in at least one of ABAQUS or NASTRAN
• Strong theoretical knowledge within durability and structural dynamics.
• Experience in analyzing structures exposed to high temperatures and vibrations.

Your excellent communication skills, with the ability to convey complex results in a structured and understandable manner, as well as proven ability to work independently will make you a great fit for this role.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Sima Bahho at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in shaping the future of automotive engineering and manufacturing. Apply now and be a part of our journey to drive sustainable and innovative solutions for tomorrow´s mobility.
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Simulation l Analysis | ABAQUS | NASTRAN | vibrations | Automotive | Adecco | Göteborg Visa mindre

Combustion Engine Development Engineer

Are you passionate about pushing the boundaries of internal combustion engine technology? Do you thrive on the challenges of testing and optimizing engines for performance, emissions, and durability? If so, we want you to be a part of our team! You will be part of a leader in industrial combustion engine development, specializing in engines ranging from 5 to 16 liters. The Industrial Development and Calibration team is at the forefront of testing and opti... Visa mer
Are you passionate about pushing the boundaries of internal combustion engine technology? Do you thrive on the challenges of testing and optimizing engines for performance, emissions, and durability? If so, we want you to be a part of our team!

You will be part of a leader in industrial combustion engine development, specializing in engines ranging from 5 to 16 liters. The Industrial Development and Calibration team is at the forefront of testing and optimizing both hardware and software to ensure top-notch engine performance.

About the position
As a Development Engineer, you will play a crucial role in delivering test and optimization tasks for our combustion engines.

Your responsibilities will include:
• Leading optimization tasks for specific engines, from sensor linearization to final engine software settings for production.
• Utilizing advanced tools such as ENE and DoE for screening and calibration.
• Working with tools like ATI Vision, DTECS, and Concerto for calibration, data acquisition, and post-processing.

Qualifications
• A Master of Science or similar relevant technical experience.
• Several years of hands-on experience in combustion engine development.
• Fluent communication skills in English, both written and spoken.
• A valid driver´s license.

We are seeking a team member with a genuine interest in product development, particularly in testing and optimization of combustion engines, including diesel and alternative fuel-powered engines. Your networking skills will be highly valued as the position involves building and maintaining internal and external contacts.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in our journey to revolutionize the world of automotive engineering. Apply now to be a part of our dedicated team!
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Combustion engine development l Industrial Development | Calibration | Adecco | Göteborg Visa mindre

Senior Engineer- ESS installation

Senior Engineer - Energy Storage System Installation (CSE-Chassis) Vehicle engineering Gothenburg, GTT Do you want to be a part of creating our future? The biggest technology shift in transport solutions in decades has started, and we at GTT want to stay in the forefront together with our customers. We are happy to announce that we now are hiring a Lead Engineer in our Energy Storage System installation area. No matter what fuels your passion we are sur... Visa mer
Senior Engineer - Energy Storage System Installation (CSE-Chassis)
Vehicle engineering Gothenburg, GTT


Do you want to be a part of creating our future? The biggest technology shift in transport solutions in decades has started, and we at GTT want to stay in the forefront together with our customers. We are happy to announce that we now are hiring a Lead Engineer in our Energy Storage System installation area. No matter what fuels your passion we are sure you will find a challenging future with us!


We offer you a chance to be involved in defining future solutions within the transport industry, along with a highly motivated and inspiring team of colleagues. If you are ready to take on a new challenge and explore new ways of driving business, then we are confident you will fit right in.


Let us tell you a little about who we are,
Within Vehicle Engineering, ESS installation team in Gothenburg, we focus on installing Energy Storage Systems on the Vehicle (chassis) for full electric vehicles as well as for fuel cell electric vehicles. That Includes to mechanically mount the High voltage battery pack(s) in a safe manner, in several different positions of the vehicle, depending on the Vehicle variants and protect it against mechanical abuse, with the help of Casting or Sheet metal Anchorage to frame, crash structure, Rubber bushings, intermediary brackets within installation. This team consists of Mechanical designers and FE Simulation Analysts.
We are reinforcing product ownership and introducing new ways of working and high agile pace in delivering product improvements, while working to create and maintain a culture of passion and trust, where we work together and support each other in our daily tasks. Our team is growing together with great expectations.


Who are you?


You are a Mechanical engineer or equivalent, having ability to lead complicated group tasks/ projects of Automotive product development and having proven experience of developing mechanical components of Castings, Sheet metals, Rubbers and have ability to work in high diversity of product offerings.
You are established in Driving the Development with cross functions and cross commodities with high energy, passion & having strong ability to maintain good working relations and networks with the people.
You are Proactive, Structured, takes initiative, demonstrate confidence, deal constructively with ambiguous problems that do not have clear solutions or outcomes.
You are the role model of Lifelong learnings, Sharing Knowledge and Coaching developing Others.
You have a positive outlook on life, take on new opportunities & challenges with a sense of urgency.


Your qualifications will also include:
Bachelor/Master’s Degree in Mechanical Engineering or equivalent with proven OEM experience in Automotive product development.
Fluent in English, both written and spoken
Excellent communication, Collaboration skills. Goal oriented & Drive for Results
Added advantage if you have commercial vehicles experience, Chassis equipment’s, battery installations and/or electromobility knowledge, having experience with Different Volvo Tools.

The responsibilities are flexible to some extent to achieve the full potential of your background and as a person.


What can we offer?


You get an opportunity to work together with highly skilled colleagues in an exciting, global environment which provides opportunities to develop both professionally and personally.
Our daily work is performed in an international environment giving the opportunity to interact with highly committed colleagues from different cultures.
Team collaboration, engagement, customer satisfaction and respect for the individual are key values for us. We hope you will learn as much from us as we will from you.
We are actively working to establish teams that will take maximum advantage of the strength in different knowledge, experience, age, gender and nationality, etc.
We do believe that well balanced working groups increases group dynamics, creativity and new approaches to solutions. Doesn’t this sound like an amazing opportunity?


Looking forward to meeting with You! Interviews will start from Mid-August.


If you’re curious to learn more or have any questions, please contact: Kamal Kacholya, Group Manager ESS installation, +46 739026436.


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Software Download Vehicle Support

SWDL/Vehicle Support Description At EE Implementation support our mission is to give support to the projects with their test vehicles and rigs within the Physical project build process. We provide this based on our broad, deep and solid knowledge both of the traditional and the distributed Electrical system. This in combination with genuine complete truck and Volvo systems knowledge makes us an outstanding partner in a variety of EEE projects. We are n... Visa mer
SWDL/Vehicle Support


Description
At EE Implementation support our mission is to give support to the projects with their test vehicles and rigs within the Physical project build process.
We provide this based on our broad, deep and solid knowledge both of the traditional and the distributed Electrical system. This in combination with genuine complete truck and Volvo systems knowledge makes us an outstanding partner in a variety of EEE projects.


We are now looking for a Software Download/Vehicle Support Engineer, EE (Electrical Engineering).


Your main tasks as an SWDL/Vehicle Support engineer is to support the vehicle fleet with fault tracing and SWDL. You will also support early phase EE engineering, software downloading/programming and parameter setting of ECUs, trouble shooting of complex problems in lab/rig and truck environment.


The role includes a considerable amount of work in different Volvo facilities both inside and outside office / workshops and includes hands-on work on trucks.


When working at EE implementation support you will have the opportunity to travel and meet both dealers and end users.


To be able to take on this assignment we think you have experience from working with electrical and electronics in vehicles and also have a good understanding of vehicle electrical architecture.
Preferable you have a complete truck knowledge and with the complete vehicle perspective to be able to understand the product as an end user.


As a person, you are driven, innovative and you have a strong customer focus and a service minded attitude. We believe that you have the ability to work independently and take initiatives. It is important to be proactive!
You are also good at problem analysis and have a problem solving oriented mindset. You have a structured way of working and the flexibility to work with a wide range of tasks.


You enjoy teamwork, contribute with team spirit and you like taking responsibility.




Qualifications:
We consider experience from product development a merit.
Knowledge in CANalyser, Kola, Protus, PROTOM,Configurator, SE-Tool and ClearQuest is considered meritorious.
It is an advantage if you have mechanical skills
You do have a driving license C or a plan to have one!
Good communication skills in English, both spoken and written




For more information please contact:
Joakim Corneliusson, Group Manager, +46 76 5531035
Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Lead Design Engineer - Cooling System Routing

Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us? Are you ready for some new challenges? Is your passion to... Visa mer
Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us?


Are you ready for some new challenges? Is your passion to work with creating future transport solutions?
There is now an opportunity for you to join us in the Air Intake & Cooling System Routing team as a Lead Design Engineer!


Who are we, your new colleagues?


We are a team of enthusiastic engineers working with air intake system and cooling system routing. The team is divided into agile teams dedicated into specific projects. We have the opportunity to work within our true areas of interest and are truly passionate of the problem-solving process.


What is our offer?


You will be part of the most challenging and exciting projects ever at Volvo Group, being part of a transfer towards electrification and automation with the target to be No 1. In the Truck industry. We have the resources and knowledge to do the job, and we now offer you a chance to join us on the journey.


Working with us means working together with many other people with different technical skills and culture, meaning that you will develop your network, your skills and work globally. On top of challenging tasks and great colleagues, we offer you the chance to work in a vibrant international organization with great opportunities for personal development.


Who are you?


We believe you are a person who is driven, business-oriented and innovative. You are interested to solve problems in a structured and effective way. You are a person with a genuine interest in technology as well as people. You are self-motivated by driving changes in a complex environment.


We also think you have:
An open mindset to learn & grow. Share your knowledge with others
Good networking skills on a local and global basis and you have an ability to understand and accept cultural differences
Good communication and presenting skills both in text and verbally



You will belong to the Chassis Department within Volvo Group Trucks Technology. Our team is responsible for product updates of Volvo heavy duty range as FM/FH in the area of Cooling system routing for Battery Electric Vehicles. We carry out our work in all stages of the product development: Complete Vehicle Projects, Product Maintenance, Advanced Engineering and Component Projects. You will work in close cross-functional cooperation in a multi-cultural environment with both internal and external contacts such as our different development sites around the world.


Your mission


You will be the product responsible for maintenance and new development within Chassis Engineering. This task will include strategic work, planning, eliminating roadblocks, creating technical roadmaps as well as being responsible for deliveries and reporting towards projects, suppliers, production, quality, aftermarket, etc.


The role includes design work, requirement setting, documentation, validation & verification of the installation for the cooling system routing. Main design work tools are CAD (CREO), Microsoft office and Volvo documentation systems.


The main design area is to install various components on the rear area of the truck (behind cab). The work will be carried out in all phases, from start cost to maintenance. Several new innovative projects are starting up where new installations are needed.


Relevant Experience:
Degree in Mechanical Engineering or similar
Several years of working experience as an engineer and/or designer within automotive engineering
Experience in CAD - Minimum 5 years of experience in 3D-modelling and PDM-systems
Experience in supplier relationships
Ability to work in global teams
Flexible to work both on technical focused activities as well as to perform cross functionally as project leader
English proficiency
Experience in cooling systems is a merit



If you think you are the right candidate for this position, then please don’t hesitate to send us your application! Visa mindre

SW Integration Test Automation Engineer to client in the motor industry

Arbetsbeskrivning Are you ready to play a pivotal role in the evolution of automotive technology and ensure the quality of cutting-edge software? Tata Technologies Nordics AB are looking for a highly motivated and skilled SW Integration Test Automation Engineer (VIL) to join their dynamic team. If you have a strong background in electrical engineering, expertise in SW integration testing, and a passion for automotive innovation, then this open position is ... Visa mer
Arbetsbeskrivning
Are you ready to play a pivotal role in the evolution of automotive technology and ensure the quality of cutting-edge software? Tata Technologies Nordics AB are looking for a highly motivated and skilled SW Integration Test Automation Engineer (VIL) to join their dynamic team. If you have a strong background in electrical engineering, expertise in SW integration testing, and a passion for automotive innovation, then this open position is perfect for you.

As a SW Integration Test Automation Engineer, you will be at the forefront of ensuring the integrity of the Complete Vehicle Electrical System within multiple vehicle projects and platforms.

Your primary responsibilities will include:
• Testing and implementing automated testing on the Complete Vehicle Electrical System level to secure BaseTech (SW download, network management, etc.) and Customer Function properties after a SW update of nod SW.
• Conducting automated testing within the Vehicle in the Loop (VIL) environment, with a focus on expanding regression testing capabilities.
• Collaborating within an agile workflow as a member of the Integration team to verify the fulfillment of the SW baseline purpose, adapting to the maturity of the car program.

Your key deliverables will include:
• Development of automated test cases for VIL.
• Execution of automated testing procedures.
• Initial analysis of test results.

Testing will be conducted on-site at our customer's facility in Torslanda, with the flexibility to remotely analyze test results and generate test reports.

Din Profil
Competences:
• M.Sc. / B.Sc. in Electrical Engineering (or similar) or equivalent practical experience.
• Proficiency in spoken and written English.
• Knowledge of SAFe and/or Agile methodologies.
• Familiarity with CANoe, CANalyzer, DSA, GIT, OSB.
• Understanding of CAN, LIN, and Ethernet protocols.
• Experience with automation tools such as Robot Framework, Jenkins, and Cynosure.
• Strong programming skills in Python.

Experiences:
• Prior experience in software system development and testing.
• Knowledge of vehicle development processes.

Personal Characteristics:
• Strong analytical abilities.
• Effective verbal and written communication skills.
• Energetic, engaging, and self-motivated.
• Strong organizational and prioritization capabilities.

Om företaget
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.

Tata Technologies: Engineering a better world.


Kontaktuppgifter
Questions about the position are answered by responsible recruiter Felix Taylor at
[email protected].

We look forward to receiving your application! Visa mindre

Software Integration Function Test Engineer to client in the motor industry

Arbetsbeskrivning Are you passionate about shaping the future of product development and engineering? Do you thrive in a dynamic and agile work environment? Tata Technologies Nordics AB is seeking a Software Integration Function Test Engineer to join their team, Tata Technologies Nordics AB are leaders in designing, engineering, and validating innovative products. If you have a background in software system development and testing, familiar with SAFe and A... Visa mer
Arbetsbeskrivning
Are you passionate about shaping the future of product development and engineering? Do you thrive in a dynamic and agile work environment? Tata Technologies Nordics AB is seeking a Software Integration Function Test Engineer to join their team, Tata Technologies Nordics AB are leaders in designing, engineering, and validating innovative products. If you have a background in software system development and testing, familiar with SAFe and Agile methodologies, and possess a Swedish driver's license with good driving experience, then this open position is perfect for you.

As a Software Integration Function Test Engineer, your primary responsibilities will include:
• Conducting function tests in Complete Vehicle, involving significant hands-on interaction with test objects and cars.
• Ensuring the proper functionality of customer features in the car when a complete software baseline is updated.
• Operating within an agile workflow and contributing to the SW Function Integration team's testing efforts.
• Analyzing test results and reporting any deviations to the integration leader.
• Collaborating with the Nod SW responsible to gain a comprehensive understanding of deviations.
• Performing on-site testing at the customer site in Torslanda and remotely analyzing test results.


Din Profil
To be successful in this role, you should have:
• Experience with SAFe and Agile methodologies.
• A Swedish driver's license and a strong driving background.
• Proficiency in software system development and testing.
• Knowledge of vehicle development processes.
• Completion of the Hällered Driving Education program, preferably T2 or T3.
• Fluent in English, both spoken and written.

Om företaget
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.

Tata Technologies: Engineering a better world.



Kontaktuppgifter
Questions about the position are answered by responsible recruiter Felix Taylor at [email protected].

We look forward to receiving your application! Visa mindre

Lead Design Engineer - Mechanical Engineering

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. This is us, your new colleagues The Project Management group govern and drive program/project/construction assignments deliveries to Testing, Verification and Material... Visa mer
Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.


This is us, your new colleagues


The Project Management group govern and drive program/project/construction assignments deliveries to Testing, Verification and Materials Technology (VT&MT;). We aim to be experts in execute technical complex industrial program/project/construction assignments for laboratories at Group Trucks Technology (GTT).


VT&MT; is responsible for the operation, maintenance and development of test and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility.


VT&MT; is a part of Powertrain Engineering, GTT located in Gothenburg. We have a legacy of innovation. Innovations that we do today will reshape the transportation industry of tomorrow.


About the role


As a Lead Design Engineer within Mechanical Engineering in Project Management you are together with colleagues, responsible for mechanical design validation in facility and test cell development, assignments, and projects. You will analyze and understand incoming needs from internal customers, as well as needs and design requirements specifications for external suppliers.


You will create sustainable solutions, strategies, methods and instructions within test cell mechanics, and mechanical equipment aligned with future demands. You are expected to bring expertise in CAD (Inventor) and standards for mechanical constructions. You will perform strength calculations and problem solving, as well as coaching and support with guidance in mechanical engineering.


Together with your team, you will take part in benchmarking different test cell designs and layouts and take decisions to create a test & development environment on a premium standard and quality level.


Additional responsibilities are:
Understand the rig specifications, translate to RFQ documentation and secure common standards.
Define technical solutions.
Coaching and support with guidance in mechanical engineering.
Documentation system (Vault).



Who are you?


We don’t know you yet, but we believe that you are a structured and solution-oriented person who enjoys working cross-functionally and building relationships. Since we work in close cooperation with our stakeholders and other teams, you are a communicative team player with a high degree of personal responsibility. An eagerness to learn and “can do attitude” characterize your personal profile. Strong technical passion and drive make you to a natural leader of challenging tasks demanding to explore new knowledge areas.


Requirements:
University degree in Mechanical Engineering or equivalent education.
Several years’ work experience.
Knowledge and experience in testing and verification.
Experience in complex machinery deliveries/installations and hand-over to line organization.
Basic knowledge in CE marking and machine directive.
English proficiency, both written and spoken. Swedish is a merit.



Ready for the next move?


If our entrepreneurial spirit, adaptability, and customer-focused mindset light your inner fire, we might be a great match! If you want to make a real impact in your career, the transportation business is where you want to be.


Due to the upcoming Christmas holidays, interviews may be conducted after the turn of the year. Don't expect any communication earlier than this. We look forward to receiving your application!


For additional information, contact Martin Sundberg, Group Manager Project Management, at [email protected].


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Laboratory Development Engineer

Do you want to drive change? Do you have a can-do attitude and enjoy teamwork? Would you like being a part in shaping the future of transportation technology? We are looking for a new team member to continue develop our world-class, automotive laboratory for future sustainable drivelines and products within heavy-duty trucks. This is us, your new colleagues Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, mainte... Visa mer
Do you want to drive change? Do you have a can-do attitude and enjoy teamwork? Would you like being a part in shaping the future of transportation technology? We are looking for a new team member to continue develop our world-class, automotive laboratory for future sustainable drivelines and products within heavy-duty trucks.


This is us, your new colleagues


Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, maintenance, and development of heavy-duty drivelines testing (engine, transmission, electromobility and Fuel Cells/Hydrogen) and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility. We cooperate close with product owners, technology owners, certification, and compliance as well as other functions.


We have test facilities and laboratories where a mix of theory and practical work is necessary in order to deliver and develop within present and new technologies. VT&MT; is a part of Powertrain Engineering, Group Trucks Technology (GTT) located in Gothenburg.


About the role


As a Development Engineer, you will lead and deliver various development activities, where creativity, quality and flexibility are of prime importance and keys to success. You will be the technical advisor in our development projects. This includes performing pre-studies, benchmarking, and choosing the best solutions following quality, accuracy, reliability, maintainability, and legal demands by working in close cooperation with equipment suppliers and networking. You will work in tight cooperation with Volvo product development engineers, maintenance and operation engineers, project managers, suppliers, and subcontractors.


You will act as a mentor on the technical equipment and methods used in the Lab and support the teams with advice and educational courses. You will also balance your time between office work and work in the Lab. You will be part of the method and technical development team with different expertise areas (software, emissions, measurements, electronics, fluids, mechanical etc.). All work together with one target: To develop world-class test facilities and methods.


Scope of your mission


To develop your specialist knowledge, drive, and lead development to create sustainable solutions, strategies & methods within test cell electronics, electrical load Units, measurements & equipment aligned with future demands, like:
Measurement equipment and sensors for test cells and on road testing.
Electrical load systems (dynamometer systems, battery simulators, etc.).
Test Cell electronics (measurements & systems, sensors, signal handling & quality, I/O systems, regulation, programming/PLC-systems, test cell electronic/electrical design).

We are looking for you…
… with personal attributes that are key for success, such as flexibility, a positive mindset and can-do attitude. You love to inspire, develop, and motivate your colleagues and yourself, building relationships on a local and global level. With your team spirit, you want to be an important team player, putting the team in first place, ready to do what is needed to make the team more efficient. Strong action will make you take own initiatives when something needs to be done or improved and do that with enthusiasm and high energy.


Requirements:
University degree in Electronic/Electrical Engineering or equivalent education/experience.
Theoretical and hands-on experience from laboratory testing measurement equipment, test cell electronics & electrical systems and signal handling.
Experience from being responsible for defining state-of-the-art technology and identifying future trends, as well as driving innovation of new solutions and concepts.
Holistic view and analytical ability to understand future testing demands, coordinate & synchronize testing demands into plans (test facility road map).
English proficiency (verbal and written) – Swedish is a merit!

Additionally, we highly value the experience within the area of automotive testing activities, in product development, test engineering or lab development.


Ready for the next move?


If our entrepreneurial spirit, adaptability, and customer-focused mindset light your inner fire, we might be a great match! If you want to make a real impact in your career, the transportation business is where you want to be.


Due to the upcoming Christmas holidays, interviews may be conducted after the turn of the year. Don't expect any communication earlier than this. We look forward to receiving your application!


For additional information, please contact Robert Aslan, Manager Method & Technical Development, at +46 739025312.


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Lead Design Engineer - Electrical Engineering

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. This is us, your new colleagues The Project Management group govern and drive program/project/construction assignments deliveries to Testing, Verification and Material... Visa mer
Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.


This is us, your new colleagues


The Project Management group govern and drive program/project/construction assignments deliveries to Testing, Verification and Materials Technology (VT&MT;). We aim to be experts in execute technical complex industrial program/project/construction assignments for laboratories at Group Trucks Technology (GTT).


VT&MT; is responsible for the operation, maintenance and development of test and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility.


VT&MT; is a part of Powertrain Engineering, GTT located in Gothenburg. We have a legacy of innovation. Innovations that we do today will reshape the transportation industry of tomorrow.


About the role


As a Lead Design Engineer within Electrical Engineering in Project Management you are together with colleagues, responsible for electrical and automation systems design validation in facility and test cell development, assignments, and projects. You will analyze and understand incoming needs from internal customers, as well as needs and design requirements specifications for external suppliers.


You are expected to bring expertise in:
Tools (Elplan, ElproCad) and understanding for documentation system.
High level of knowledge in electricity, standards related to it and a good understanding of EMC, High Voltage and Low Voltage Directive.
Basic knowledge in, Electrical Safety, CE marking and machine directives.
Cable sizing, Measurement techniques and electronics, Signal handling and quality as well as PID regulator technology.
Test cell set-up and structure are meritorious.



As well as coaching and support with guidance in electrical engineering.


You will create sustainable solutions, strategies, methods and instructions within test cell electronics, electrical load units and measurement equipment aligned with future demands. Together with your team, you will take part in benchmarking different systems to create a test & development environment on a premium standard and quality level. Additionally, you will analyze rig specifications, translate to RFQ documentation and secure common standards, as well as defining technical solutions.


Who are you?


We don’t know you yet, but we believe that you are a structured and solution-oriented person who enjoys working cross-functionally and building relationships. Since we work in close cooperation with our stakeholders and other teams, you are a communicative team player with a high degree of personal responsibility. An eagerness to learn and “can do attitude” characterize your personal profile. Strong technical passion and drive make you to a natural leader of challenging tasks demanding to explore new knowledge areas.


Requirements:
University degree in Electrical Engineering or equivalent education.
Several years’ work experience.
Knowledge and experience in testing and verification.
Experience in complex machinery deliveries/installations and hand-over to line organization.
Experienced in agile ways of working.
English proficiency, both written and spoken. Swedish is a merit.



Ready for the next move?


If our entrepreneurial spirit, adaptability, and customer-focused mindset light your inner fire, we might be a great match! If you want to make a real impact in your career, the transportation business is where you want to be.


Due to the upcoming Christmas holidays, interviews may be conducted after the turn of the year. Don't expect any communication earlier than this. We look forward to receiving your application!


For additional information, contact Martin Sundberg, Group Manager Project Management, at [email protected].


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Mjukvaruintegrations-testautomationsingenjör till kund inom motorbranschen

Arbetsbeskrivning Är du redo att spela en central roll i utvecklingen av fordonsbranschens teknologi och säkerställa kvaliteten på toppmodern programvara? Autorekrytering söker en högt motiverad och skicklig mjukvaruintegrations-testautomationsingenjör (VIL) för att ansluta sig till vår kunds dynamiska team. Om du har en gedigen bakgrund inom elektroteknik, expertis inom mjukvaruintegrationstestning och en passion för fordonsinnovation är den här lediga tj... Visa mer
Arbetsbeskrivning
Är du redo att spela en central roll i utvecklingen av fordonsbranschens teknologi och säkerställa kvaliteten på toppmodern programvara? Autorekrytering söker en högt motiverad och skicklig mjukvaruintegrations-testautomationsingenjör (VIL) för att ansluta sig till vår kunds dynamiska team. Om du har en gedigen bakgrund inom elektroteknik, expertis inom mjukvaruintegrationstestning och en passion för fordonsinnovation är den här lediga tjänsten perfekt för dig.
Som en mjukvaruintegrations-testautomationsingenjör kommer du att vara i frontlinjen för att säkerställa integriteten hos kompletta fordonselektriska system inom flera fordonsprojekt och plattformar.

Dina huvudsakliga ansvarsområden inkluderar:
• Testning och implementering av automatiserad testning på nivån för kompletta fordonselektriska system för att säkra BaseTech (SW-nedladdning, nätverkshantering, etc.) och kundfunktionsattribut efter en SW-uppdatering av nod-SW.
• Genomförande av automatiserad testning inom Vehicle in the Loop (VIL) -miljön med fokus på att utvidga regressions-testningskapaciteten.
• Samarbeta inom en agil arbetsprocess som medlem i Integrations-teamet för att verifiera uppfyllandet av SW-baslinjens syfte och anpassa sig till mognaden i bilprogrammet.

Dina huvudsakliga resultat kommer att inkludera:
• Utveckling av automatiserade testfall för VIL.
• Utförande av automatiserade testningsprocedurer.
• Initial analys av testresultat.
Testningen kommer att utföras på plats på vår kunds anläggning i Torslanda, med flexibilitet att analysera testresultat på distans och generera testrapporter.

Din Profil
Kompetenser:
• M.Sc. / B.Sc. i elektroteknik (eller liknande) eller motsvarande praktisk erfarenhet.
• Färdighet i tal och skrift på engelska.
• Kunskap om SAFe och/eller Agile-metoder.
• Bekantskap med CANoe, CANalyzer, DSA, GIT, OSB.
• Förståelse för CAN-, LIN- och Ethernet-protokoll.
• Erfarenhet av automatiseringsverktyg som Robot Framework, Jenkins och Cynosure.
• Starka programmeringskunskaper i Python.

Erfarenheter:
• Tidigare erfarenhet av mjukvarusystemutveckling och testning.
• Kunskap om fordonsutvecklingsprocesser.

Personliga egenskaper:
• Stark analytisk förmåga.
• Effektiva muntliga och skriftliga kommunikationsförmågor.
• Energetisk, engagerad och självgående.
• Stark organisatorisk och prioriteringsförmåga.

Om företaget
Autorekrytering är Sveriges enda bemannings- och rekryteringsföretag nischat inom motorbranschen. Vi hittar snabbt rätt kompetens – från verkstadsgolv till ledande positioner.
Sedan 2005 har vi på Autorekrytering matchat människor med rätt jobb inom motorbranschen. Vi finns när du behöver driven och kunnig personal. Oavsett om det gäller rekrytering eller tillfällig förstärkning hjälper vi dig att hitta rätt.
Autorekrytering finns i Stockholm, Göteborg, Jönköping och Malmö. Vi utför uppdrag i hela Sverige.
Vi erbjuder dig möjligheten att arbeta inom en bransch som är i ständig förändring och tillväxt, där din potential är gränslös.

Kontaktuppgifter
För mer information vänligen kontakta ansvarig rekryterare på [email protected].
Skicka in din ansökan idag och bli en del av en spännande framtid inom motorbranschen! Visa mindre

Mjukvaruintegration Funktionstest Ingenjör till kund inom motorbranschen

Arbetsbeskrivning Är du passionerad om att forma framtiden för produktutveckling och teknik? Trivs du i en dynamisk och agil arbetsmiljö? Autorekrytering söker en mjukvaruintegration funktionstest ingenjör för att ansluta sig till vår kunds team, kunden är ledande inom design, teknik och validering av innovativa produkter. Om du har en bakgrund inom utveckling och testning av mjukvarusystem, är bekant med SAFe och agila metoder och har ett svenskt körkort ... Visa mer
Arbetsbeskrivning
Är du passionerad om att forma framtiden för produktutveckling och teknik? Trivs du i en dynamisk och agil arbetsmiljö? Autorekrytering söker en mjukvaruintegration funktionstest ingenjör för att ansluta sig till vår kunds team, kunden är ledande inom design, teknik och validering av innovativa produkter. Om du har en bakgrund inom utveckling och testning av mjukvarusystem, är bekant med SAFe och agila metoder och har ett svenskt körkort med bra körfärdigheter, då är den här lediga tjänsten perfekt för dig.

Som mjukvaruintegration funktionstest ingenjör är dina huvudsakliga ansvarsområden följande:
• Genomföra funktionstester i kompletta fordon, inklusive betydande hands-on interaktion med testobjekt och bilar.
• Säkerställa korrekt funktionalitet av kundfunktioner i bilen när en komplett mjukvarubaslinje uppdateras.
• Arbeta inom en agil arbetsprocess och bidra till SW Function Integration teamets testinsatser.
• Analysera testresultat och rapportera eventuella avvikelser till integrationsledaren.
• Samarbeta med Nod SW-ansvarig för att få en omfattande förståelse för avvikelser.
• Utföra on-site-testning på kundens plats i Torslanda och analysera testresultat på distans.

Din Profil
För att vara framgångsrik i den här rollen bör du ha:
• Erfarenhet av SAFe och agila metoder.
• Ett svenskt körkort och gedigen körerfarenhet.
• Kompetens inom mjukvarusystemutveckling och testning.
• Kunskap om fordonsutvecklingsprocesser.
• Genomfört Hällered Driving Education-programmet, helst T2 eller T3.
• Flytande engelska, både i tal och skrift.

Om företaget
Autorekrytering är Sveriges enda bemannings- och rekryteringsföretag nischat inom motorbranschen. Vi hittar snabbt rätt kompetens – från verkstadsgolv till ledande positioner.
Sedan 2005 har vi på Autorekrytering matchat människor med rätt jobb inom motorbranschen. Vi finns när du behöver driven och kunnig personal. Oavsett om det gäller rekrytering eller tillfällig förstärkning hjälper vi dig att hitta rätt.
Autorekrytering finns i Stockholm, Göteborg, Jönköping och Malmö. Vi utför uppdrag i hela Sverige.
Vi erbjuder dig möjligheten att arbeta inom en bransch som är i ständig förändring och tillväxt, där din potential är gränslös.

Kontaktuppgifter
För mer information vänligen kontakta ansvarig rekryterare på [email protected].
Skicka in din ansökan idag och bli en del av en spännande framtid inom motorbranschen! Visa mindre

Materialingenjör - Gjutna material

Vill du vara med och forma framtidens lösningar för en hållbar transport- och infrastruktursindustri? Gillar du att arbeta med materialtekniska projekt och kontinuerligt ha en öppen dialog med dina intressenter? Tycker du om lagarbete och att utveckla dig själv och andra för att möta framtida utmaningar? Ta då chansen att följa med på den spännande resa vi seglar på när vi skapar framtidens lösningar för våra kunder samt bygger en hållbar arbetsmiljö prägl... Visa mer
Vill du vara med och forma framtidens lösningar för en hållbar transport- och infrastruktursindustri? Gillar du att arbeta med materialtekniska projekt och kontinuerligt ha en öppen dialog med dina intressenter? Tycker du om lagarbete och att utveckla dig själv och andra för att möta framtida utmaningar? Ta då chansen att följa med på den spännande resa vi seglar på när vi skapar framtidens lösningar för våra kunder samt bygger en hållbar arbetsmiljö präglad av tillit, öppenhet och välbefinnande.


Det här är vi, dina nya kollegor


På Volvo Group Trucks Technology materiallabb i Göteborg är vi ett team på cirka 40 passionerade ingenjörer som trivs med det vi gör. Vårt team byggs av lagarbete och engagemang, att ha roligt tillsammans och stötta varandra i vårt dagliga arbete. Materialtekniklabbet är organiserat inom avdelningen verifiering, provning och materialteknik. Vi är en global expertfunktion som servar Volvokoncernen och utvalda externa kunder inom tillämpad materialteknik. Vi erbjuder kompetens och utvecklingsresurser för produkt- och processutveckling. Vi har ett modernt och välutrustat laboratorium för materialanalyser och för provning av materialegenskaper. Våra specialister arbetar globalt med hela produktlivscykeln från tidig utveckling till underhåll. I vårt team värdesätter vi styrkan i skillnader i bakgrund, kunskap, ålder, kön och nationalitet.


Om rollen


Du kommer att vara en del av Cast Materials-teamet och du kommer att agera teknisk expert för gjutna material (aluminium och gjutjärn). Du kommer tillsammans med teamet att ansvara för att ge feedback och rekommendationer till produktionsanläggningar inom Volvokoncernen och stödja revision av externa leverantörer. Du kommer att leda och utföra materialutredningsprojekt, utföra felanalyser, gjutsimuleringar och skriva ingenjörsrapporter med analys och rekommendationer för beslut.


Andra arbetsuppgifter:
Delta i ständiga förbättringar av laboratoriet, såsom utrustningsansvar och metodutveckling.
Utveckla och hålla utbildningar inom och utanför vår organisation och agera som mentor.



Vem är du?


Vi tror att du är en person med hög social kompetens som trivs med att utveckla team och dig själv. Du har en positiv inställning och drivkraft, att ta egna initiativ är naturligt för dig. Vi arbetar tillsammans i team och därför ser vi att du trivs med att samarbeta med andra. Som person är du lösningsorienterad och tycker om att använda din analytiska förmåga. Vi ser gärna att du har erfarenhet av gjuterimiljö och processer. Du kan enkelt bygga förtroende och relationer på alla organisationsnivåer, oavsett om det är en produktionsledare, auditör eller gjuterioperatör.


För att lyckas i rollen ser vi att du har:
Masterexamen i Materialvetenskap/teknik med inriktning på metalliska material tillsammans med minst 10 års relevant arbetslivserfarenhet. Alternativt en doktorsexamen (PhD) i Materialvetenskap/teknik med inriktning på gjutning av metalliska material med minst 5 års relevant arbetslivserfarenhet.
Erfarenhet av att använda relevant laboratorieutrustning och utveckling av metoder för materialundersökning och provning, samt erfarenhet av att fastställa felmekanismer och feltyper.
Minst 5 års erfarenhet inom området gjutning av aluminium och/eller gjutjärn.
Praktisk erfarenhet av gjutsimuleringsverktyg (t.ec. Magmasoft).
Flytande i svenska och engelska, i både tal och skrift.
Möjlighet att resa regelbundet i Sverige och ibland utomlands.
B-körkort.



Vad kan vi erbjuda?


Du får möjlighet att arbeta tillsammans med mycket kompetenta och stöttande kollegor i en spännande, global miljö som ger möjligheter att utvecklas både professionellt och personligt. Vårt dagliga arbete utförs i en internationell miljö som möjliggör interaktion med mycket engagerade kollegor från olika kulturer. Vi litar på varandra, agerar som ett team och håller oss nära produkten.


Tjänsten är placerad i Göteborg. Resor inom Sverige och utomlands förväntas.


På grund av kommande julledighet kommer intervjuer eventuellt genomföras efter årsskiftet. Förvänta dig inte någon kommunikation tidigare än detta. Vi ser fram emot din ansökan! Visa mindre

SW Integration Test Automation Engineer to our client in the motor industry

Arbetsbeskrivning Are you ready to play a pivotal role in the evolution of automotive technology and ensure the quality of cutting-edge software? Autorekrytering are looking for a highly motivated and skilled SW Integration Test Automation Engineer (VIL) to join our client’s dynamic team. If you have a strong background in electrical engineering, expertise in SW integration testing, and a passion for automotive innovation, then this open position is perfec... Visa mer
Arbetsbeskrivning
Are you ready to play a pivotal role in the evolution of automotive technology and ensure the quality of cutting-edge software? Autorekrytering are looking for a highly motivated and skilled SW Integration Test Automation Engineer (VIL) to join our client’s dynamic team. If you have a strong background in electrical engineering, expertise in SW integration testing, and a passion for automotive innovation, then this open position is perfect for you.

As a SW Integration Test Automation Engineer, you will be at the forefront of ensuring the integrity of the Complete Vehicle Electrical System within multiple vehicle projects and platforms.

Your primary responsibilities will include:
• Testing and implementing automated testing on the Complete Vehicle Electrical System level to secure BaseTech (SW download, network management, etc.) and Customer Function properties after a SW update of nod SW.
• Conducting automated testing within the Vehicle in the Loop (VIL) environment, with a focus on expanding regression testing capabilities.
• Collaborating within an agile workflow as a member of the Integration team to verify the fulfillment of the SW baseline purpose, adapting to the maturity of the car program.

Your key deliverables will include:
• Development of automated test cases for VIL.
• Execution of automated testing procedures.
• Initial analysis of test results.

Testing will be conducted on-site at our customer's facility in Torslanda, with the flexibility to remotely analyze test results and generate test reports.

Din Profil
Competences:
• M.Sc. / B.Sc. in Electrical Engineering (or similar) or equivalent practical experience.
• Proficiency in spoken and written English.
• Knowledge of SAFe and/or Agile methodologies.
• Familiarity with CANoe, CANalyzer, DSA, GIT, OSB.
• Understanding of CAN, LIN, and Ethernet protocols.
• Experience with automation tools such as Robot Framework, Jenkins, and Cynosure.
• Strong programming skills in Python.

Experiences:
• Prior experience in software system development and testing.
• Knowledge of vehicle development processes.

Personal Characteristics:
• Strong analytical abilities.
• Effective verbal and written communication skills.
• Energetic, engaging, and self-motivated.
• Strong organizational and prioritization capabilities.

Om företaget
We at Autorekrytering are the leading staffing and recruitment agency in Sweden tailored specifically to the motor industry. At Autorekrytering, we have been matching people with the right jobs in the motor industry since 2005. We help companies and people in the motor industry find each other’s perfect match.

Kontaktuppgifter
Questions about the position are answered by responsible recruiter Felix Taylor at
[email protected].

We look forward to receiving your application! Visa mindre

Engine Oil Development Engineer

Are you ready to take your engineering expertise to the next level? We are currently seeking a dedicated and creative Engine Oil Development Engineer to lead advanced engineering projects! Role description Are you ready to take your engineering expertise to the next level? We are currently seeking a dedicated and creative Engine Oil Development Engineer to lead advanced engineering projects. This role offers an exciting opportunity to contribute to cuttin... Visa mer
Are you ready to take your engineering expertise to the next level? We are currently seeking a dedicated and creative Engine Oil Development Engineer to lead advanced engineering projects!

Role description
Are you ready to take your engineering expertise to the next level? We are currently seeking a dedicated and creative Engine Oil Development Engineer to lead advanced engineering projects. This role offers an exciting opportunity to contribute to cutting-edge developments in the automotive industry.

Responsibilities:
• Spearhead engine oil development tasks during the advanced engineering and concept phase, including strategic planning and test coordination with stakeholders.
• Collaborate closely with lubricant suppliers to explore new applications and ensure optimal performance of new oil candidates.
• Facilitate seamless testing of new oil candidates in engine rigs and vehicle tests during the development phase.
• Establish initial specifications for pioneering oil formulations, driving innovation in the field.
• Represent the company at influential oil forums, including the prestigious IFC, and contribute to shaping the future of the industry.
• Oversee oil analysis conducted by external service providers, ensuring meticulous documentation and providing expert insights for test result interpretation.
• Manage the approval of service oils for key customers, delivering exceptional consultancy services that meet and exceed their expectations.

About you
• Education and degree in Mechanical Engineering.
• Experience in automotive industry product development or verification testing.
• Strong interest in and understanding of lubricant properties for internal combustion engine functionality.
• Demonstrated ability to drive the development of engine oil for various hybrid applications.
• Excellent communication skills in both written and spoken English and fluency in Swedish is highly valued.
• Familiarity with Teamcenter and Sharepoint is considered a plus.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in shaping the future of the automotive industry with your innovative mindset and passion for engineering excellence!
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Mechanical Engineer l Development | Verification testing | Lubricant | Combustion engine | Automotive | Adecco | Göteborg Visa mindre

Underhållsingenjör till Volvo Cars Batterifabrik (TBA)

Who are we? Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them. Vad vi erbjuder Som Underhållsingenjör hos oss kommer du vara en viktig kugg... Visa mer
Who are we?

Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them.

Vad vi erbjuder

Som Underhållsingenjör hos oss kommer du vara en viktig kugge i att förvalta samt hålla hög tillgänglighet i batterimonteringens produktionsutrustningar. Det innebär att du kommer samla in drift-relaterade uppgifter och utifrån data och analyser säkerställa maskinernas prestanda. Du kommer även att utveckla utrustningarna mot morgondagens teknik.

Under första delen av din anställning kommer du arbeta i projektform då vår fabrik tas i drift under slutet av 2025. Du kommer supportera Reliability & Maintainability ingenjörer (R&M) i projekt med din tekniska kompetens samt erfarenhet och under projektet tilldelas ett ansvarsområde som du efter start av produktionen förvaltar.

Vad kommer du att utföra

I rollen som Underhållsingenjör hos oss kommer du att jobba med både förebyggande underhåll (FU) som optimerar utrustningen utifrån resurs/tillgänglighet och avhjälpande underhåll där du tar fram felsökningsdokument och reparationsdokument. Uppdatering av all dokumentation sker även löpande då det behövs. Vid behov kommer du ihop med arbetsledning/planering prioritera och optimera underhållsaktiviteter/resurser.

I rollen ansvarar du för den tekniska delen i serviceavtal vid upphandling tillsammans med inköp och att utvärdera de leverantörer som underhåll använder sig av. Du kommer inom ditt fabriksområde också ansvara för att utrustningsstruktur är uppdaterad i underhållssytemet Maximo, bereda, lägga upp och skrota reservdelar ur förrådet samt att det finns en ersättningsinvesteringsplan för området. 

Du kommer se till att underhållsintressen tillvaratas i projekt där ditt bidrag kommer vara att fokusera på exempelvis reservdelar, förebyggande underhåll, dokumentation och underhållsutbildning. Vidare kommer du delta i utveckling av underhållsprocessen och arbeta med teknik-metodutveckling samt framtagande av nya verktyg inom ditt ansvarsområde.

Din profil

Vi ser att du har en teknisk högskolekompetens eller motsvarande 3 års praktisk yrkeserfarenhet av specialkompetensområden, exempelvis inom el, Plc eller maskinteknik. Vi tror även att du har en god kunskap om produktionsprocessen, mycket god kunskap om underhållsprocesserna och god kännedom om VDM-processen (Value Driven Maintenance). Du har goda kunskaper i både svenska och engelska, muntligt och skriftligt. 

Vidare behöver du ha en god användarkunskap gällande Officepaketet, främst Excel men även andra program används frekvent i rollen, samt mycket god kunskap att hantera företagets underhålls och dokumentationssystem. Meriterande kunskaper i rollen är om du har goda kunskaper av Six Sigma konceptet och kunskaper/erfarenhet av underhållssystemet Maximo. 

Du som person 

Du är en sann teamorienterad person. Med ett både öppet och inlyssnande sätt får du andra att känna förtroende för dig. Som person har du lätt för att kommunicera med andra och att anpassa ditt budskap och informationen du önskar förmedla till olika mottagare. Du är logisk i ditt tänkande och har en lösningsfokuserat förhållningssätt som uppmuntrar dig till att hitta nya vägar och fatta beslut när det behövs. Som person lägger du alltid ett stort fokus på hög kvalitet, nöjd kund och leveransprecision, i allt du tar dig för.

Nyfiken på att veta mer?

Låter det som ditt nästa steg? Välkommen att visa ditt intresse redan idag genom att skicka in din ansökan via vårt rekryteringsverktyg. Vi ser fram emot att lära känna dig bättre och se vad du kan tillföra företaget. Notera att vi inte godtar ansökningar som inkommer via mail på grund av GDPR.

För ytterligare nformation kring tjänsten, var vänlig kontakta, Rekryterande Chef, Joakim Bladh, [email protected].
För frågor relaterade till rekryteringsprocessen, var vänlig kontakta rekryterare, Josephine Fagrell, på mejl: [email protected].

Observera att detta är en intresseanmälan och att vi kommer att kontakta dig så snart vi börjar rekrytera. Urval sker löpande, men rollerna kommer börja tillsättas i början av 2024. Visa mindre

Manufacturing Engineer within Automotive industry

At Manufacturing Engineering, we are dedicated to developing and implementing efficient and flexible production systems while prioritizing our people. We offer a dynamic and supportive international environment with ample opportunities for personal and professional growth. Join us and be part of a team that´s committed to shaping the future of mobility! Role description As a Manufacturing Engineer, you will lead cross-technical product and manufacturing i... Visa mer
At Manufacturing Engineering, we are dedicated to developing and implementing efficient and flexible production systems while prioritizing our people. We offer a dynamic and supportive international environment with ample opportunities for personal and professional growth. Join us and be part of a team that´s committed to shaping the future of mobility!

Role description
As a Manufacturing Engineer, you will lead cross-technical product and manufacturing initiatives within Propulsion Components, driving global strategic initiatives. You will collaborate closely with stakeholders globally to ensure the alignment, learning, and enhancement of production solutions. Your responsibilities will also include providing product and process feedback to Research and Development (R&D), focusing on key manufacturing attributes such as quality, assembly time, cost efficiency, environmental sustainability, changeover, and flexibility. You´ll take full ownership and responsibility for product and process development, ensuring the implementation of lean, robust, and ergonomic solutions.

About you
•Bachelor´s degree within production or similar
• Knowledge about 6 Sigma and Lean Production
• Good understanding of Teamcenter
• Automated assembly knowledge
• Problems solving DMAIC knowledge
• Geometric assurance knowledge
• Process development (station/line level)
• Advanced English communication skills

Your passion for automobiles, target-oriented mindset, and open-minded attitude will make you a perfect fit for our team. Excellent communication skills, a holistic perspective, and the ability to make informed compromises are essential for success in this role.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in shaping the future of automotive engineering and manufacturing. Apply now and be a part of our journey to drive sustainable and innovative solutions for tomorrow´s mobility.
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Manufacutring l 6 Sigma | Lean Production | DMAIC | Geometric assurance | Process development | Automotive | Adecco | Göteborg Visa mindre

Component Engineer within Automotive industry

Join our dedicated team of professionals as we shape the future of powertrain technologies for the automotive industry and beyond! Role description In your role as the Component Engineer for High Pressure Fuel Systems, you will have a crucial responsibility in coordinating and spearheading the development of components for ignition and high-pressure fuel systems in collaboration with our esteemed suppliers. You will be accountable for ensuring timely deli... Visa mer
Join our dedicated team of professionals as we shape the future of powertrain technologies for the automotive industry and beyond!

Role description
In your role as the Component Engineer for High Pressure Fuel Systems, you will have a crucial responsibility in coordinating and spearheading the development of components for ignition and high-pressure fuel systems in collaboration with our esteemed suppliers. You will be accountable for ensuring timely deliveries that meet technical requirements and allocated budgets.

Key responsibilities
• Manage and supervise the development of components for the Ignition and High-Pressure Fuel Systems in partnership with suppliers.
• Assess proposals from suppliers for technical solutions and endorse technical documentation, encompassing drawings, 3D models, and technical specifications.
• Initiate and supervise the validation procedure to ensure the components meet specific requirements and operate effectively within the system application.
• Proactively handle and correct deviations from established standards.
• Maintain transparent communication with the project team and the organizational line, ensuring consistent updates and forecasts are provided.

About you
• Holds a university degree in engineering or possesses equivalent experience based on professional background.
• Substantial involvement in the development of automotive hardware and control systems.
• Proficiency in both spoken and written English.
• Able to provide documented evidence of experience with CATIA V5.
• Demonstrates a strong enthusiasm for comprehending technical aspects, including components and their functionalities.
• Desirable to have a understanding of combustion engine systems.

Your passion for automobiles, target-oriented mindset, and open-minded attitude will make you a perfect fit for our team. Excellent communication skills, a holistic perspective, and the ability to make informed compromises are essential for success in this role.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in shaping the future of automotive engineering and manufacturing. Apply now and be a part of our journey to drive sustainable and innovative solutions for tomorrow´s mobility.
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Development l Hardware | Control systems | Catia V5 | Combustion engine systems | Automotive | Adecco | Göteborg Visa mindre

Combustion System Calibration Engineer at Powertrain Engineering

Are you passionate about shaping the future of combustion engine development? Join our dynamic team at Powertrain Engineering and be part of a global environment dedicated to delivering top-notch solutions in the automotive industry. Role description As a Combustion System Calibration Engineer, you will play a pivotal role in meeting customer´s expectations regarding quality, fuel efficiency, and adherence to emission regulations. Your tasks will involve ... Visa mer
Are you passionate about shaping the future of combustion engine development? Join our dynamic team at Powertrain Engineering and be part of a global environment dedicated to delivering top-notch solutions in the automotive industry.

Role description
As a Combustion System Calibration Engineer, you will play a pivotal role in meeting customer´s expectations regarding quality, fuel efficiency, and adherence to emission regulations. Your tasks will involve the selection of Engine Hardware components and the calibration of engine-related functions. You will be instrumental in the development of advanced control strategies and optimized hardware, contributing significantly to our cutting-edge initiatives. Your work will encompass a diverse range of activities, including time spent in the engine laboratory, virtual testing, simulation, data analysis, creative brainstorming sessions, and comprehensive vehicle testing. You will have the unique opportunity to follow your calibration process from initial drafts to test cells, and finally to verification in a live vehicle setting, even experiencing expeditions in varying climate conditions.

About you
• A Master of Science or equivalent relevant technical experience
• Fluent in both written and spoken English
• At least 5 years of experience in combustion engine development, with a minimum of 3 years in engine calibration
• Proficiency in combustion engine modeling and optimization, including experience in leading technical tasks
• Familiarity with virtual calibration tools and methods, with a strong inclination towards continuous improvement using numerical and physical models

We are seeking individuals with a positive attitude, excellent interpersonal skills, and a collaborative mindset. If you have a passion for achieving outstanding results and a genuine interest in enhancing work methodologies, you will be a perfect fit for our team.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Join us in our journey to revolutionize the world of automotive engineering. Apply now to be a part of our dedicated team!
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Engineering| Combustion engine development l virtual calibration | Automotive | Adecco | Göteborg Visa mindre

HIL Ingenjör till fordonsbranschen

Arbetsbeskrivning På Tata Technologies förverkligar vi drömmar om produktutveckling genom att designa, konstruera och validera morgondagens produkter för världens ledande tillverkare. Med vår kontinuerliga tillväxt söker Tata Technologies Nordics AB nu en HIL Automation Engineer för att stärka vårt team i Göteborg. Rollens Omfattning: Som HIL Automation Engineer kommer du att spela en central roll i att säkerställa högsta leveransnivå inom Embedded Solut... Visa mer
Arbetsbeskrivning
På Tata Technologies förverkligar vi drömmar om produktutveckling genom att designa, konstruera och validera morgondagens produkter för världens ledande tillverkare. Med vår kontinuerliga tillväxt söker Tata Technologies Nordics AB nu en HIL Automation Engineer för att stärka vårt team i Göteborg.

Rollens Omfattning:

Som HIL Automation Engineer kommer du att spela en central roll i att säkerställa högsta leveransnivå inom Embedded Solutions-divisionen i Europa. Ditt huvudsakliga fokus kommer att vara på testautomatisering och kvalitetssäkring för nyckel- och kommande konton i Europaregionen, med särskild tonvikt på Hardware-in-the-Loop (HIL/VIL)-testning. Du kommer att vara ansvarig för att analysera Continuous Integration (CI)-körningar, felsöka problem, stödja ett gränssnitt för testautomatisering och övervaka behoven för både manuell och automatiserad testning. Dessutom kommer du att få i uppdrag att utföra rotorsaksanalyser i riggsmiljön.

Din Profil
-Analysera Continuous Integration (CI)-körningar och identifiera och åtgärda problem för att säkerställa tillförlitlighet och noggrannhet i testprocesserna.

-Stödja utvecklingen av automatiserade testskript för kärnriggen, som omfattar både HIL-testning och kontinuerliga integrationsmiljöer.

-Utföra manuell testning för att validera noggrannheten och effektiviteten i testprocedurerna.

-Designa användarvänliga GUI:er och Power BI-dashboardar för att visualisera testresultat och nyckeltal.

-Samarbeta med tvärfunktionella team för att säkerställa sömlös integration av testlösningar inom projektutvecklingscykeln.

Krav:

-Minst 5 års erfarenhet inom liknande områden med bakgrund inom inbyggd systemutveckling eller testautomatisering.

-Tidigare erfarenhet och kompetens inom fordonsbranschen med kunskap om CAN/LIN/Flexray/Ethernet.

-Erfarenhet av Scrum och arbete med team på distans över hela världen.

-Utmärkta kommunikationsfärdigheter och förmåga att kommunicera på alla nivåer.

-Erfarenhet av Hardware in the Loop-testning.

-Kandidatexamen inom programvaru- eller elektronikingenjör

Om företaget
Om du brinner för att ta innovation till de projekt du arbetar med och vill ansluta dig till ett globalt företag, då är detta platsen för dig.

Tata Technologies: Gör det verkligt. Gör det bättre™.

Tata Technologies vill tacka alla sökande för deras intresse. Varje ansökan kommer att granskas enligt de fastställda kriterierna för rollen. Vi vill meddela att endast kandidater som övervägs kommer att kontaktas. Om du inte hör från oss inom 10 arbetsdagar efter sista ansökningsdatum innebär det tyvärr att din ansökan inte har varit framgångsrik. Vi kommer dock behålla dina uppgifter för framtida lämpliga möjligheter.

Kontaktuppgifter
För Frågor om tjänsten? kontakta [email protected]

Vi ser Framemot att ta emot din ansökan! Visa mindre

HIL Engineer Automotive industrie

Arbetsbeskrivning we turn product development dreams into reality by designing, engineering, and validating the products of tomorrow for the world's leading manufacturers. Due to our continuous growth, Tata Technologies Nordics AB is now seeking a HIL Automation Engineer to bolster our team in Gothenburg. Scope of Role: As an HIL Automation Engineer, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solut... Visa mer
Arbetsbeskrivning
we turn product development dreams into reality by designing, engineering, and validating the products of tomorrow for the world's leading manufacturers. Due to our continuous growth, Tata Technologies Nordics AB is now seeking a HIL Automation Engineer to bolster our team in Gothenburg.

Scope of Role:

As an HIL Automation Engineer, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solutions division in Europe. Your primary focus will be on test automation and quality assurance for key and upcoming accounts in the European region, with a specific emphasis on Hardware-in-the-Loop (HIL/VIL) testing. You will be responsible for analyzing Continuous Integration (CI) runs, debugging issues, supporting an interface for test automation, and overseeing the needs of both manual and automated testing. Additionally, you will be tasked with Root Cause Analysis in the rigs' environments.

Din Profil
As an HIL Automation Engineer, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solutions division in Europe. Your primary focus will be on test automation and quality assurance for key and upcoming accounts in the European region, with a specific emphasis on Hardware-in-the-Loop (HIL/VIL) testing. You will be responsible for analyzing Continuous Integration (CI) runs, debugging issues, supporting an interface for test automation, and overseeing the needs of both manual and automated testing. Additionally, you will be tasked with Root Cause Analysis in the rigs' environments.

Responsibilities:

-Analyze Continuous Integration (CI) runs and identify and troubleshoot issues to ensure the reliability and accuracy of testing processes.
-Support the development of automated test scripts for the core rig, covering both HIL testing and continuous integration environments.
-Conduct manual testing to validate the accuracy and efficiency of the testing procedures.
-Design user-friendly GUIs and Power BI Dashboards to visualize testing results and key performance indicators.
-Collaborate with cross-functional teams to ensure seamless integration of testing solutions within the project development lifecycle.

Requirements:

At least 2 years of experience in similar areas with an embedded background, along with 5 years of relevant experience in Software Development or Test Automation.
Prior experience and skills in the Automotive Embedded area with knowledge of CAN/LIN/Flexray/Ethernet.

-Experience with Scrum and working with remote teams across the globe.
-Excellent communication skills demonstrated by the ability to communicate at all levels.
-Experience in Hardware in the loop testing.
-Bachelor's Degree in Software Engineering or Electronics Engineering.

If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.

Kontaktuppgifter
For more information pleas contact [email protected] Visa mindre

Lead Design Engineer - Cooling System Routing

Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us? Are you ready for some new challenges? Is your passion to... Visa mer
Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us?


Are you ready for some new challenges? Is your passion to work with creating future transport solutions?
There is now an opportunity for you to join us in the Air Intake & Cooling System Routing team as a Lead Design Engineer!


Who are we, your new colleagues?


We are a team of enthusiastic engineers working with air intake system and cooling system routing. The team is divided into agile teams dedicated into specific projects. We have the opportunity to work within our true areas of interest and are truly passionate of the problem-solving process.


What is our offer?


You will be part of the most challenging and exciting projects ever at Volvo Group, being part of a transfer towards electrification and automation with the target to be No 1. In the Truck industry. We have the resources and knowledge to do the job, and we now offer you a chance to join us on the journey.


Working with us means working together with many other people with different technical skills and culture, meaning that you will develop your network, your skills and work globally. On top of challenging tasks and great colleagues, we offer you the chance to work in a vibrant international organization with great opportunities for personal development.


Who are you?


We believe you are a person who is driven, business-oriented and innovative. You are interested to solve problems in a structured and effective way. You are a person with a genuine interest in technology as well as people. You are self-motivated by driving changes in a complex environment.


We also think you have:
An open mindset to learn & grow. Share your knowledge with others
Good networking skills on a local and global basis and you have an ability to understand and accept cultural differences
Good communication and presenting skills both in text and verbally



You will belong to the Chassis Department within Volvo Group Trucks Technology. Our team is responsible for product updates of Volvo heavy duty range as FM/FH in the area of Cooling system routing for Battery Electric Vehicles. We carry out our work in all stages of the product development: Complete Vehicle Projects, Product Maintenance, Advanced Engineering and Component Projects. You will work in close cross-functional cooperation in a multi-cultural environment with both internal and external contacts such as our different development sites around the world.


Your mission


You will be the product responsible for maintenance and new development within Chassis Engineering. This task will include strategic work, planning, eliminating roadblocks, creating technical roadmaps as well as being responsible for deliveries and reporting towards projects, suppliers, production, quality, aftermarket, etc.


The role includes design work, requirement setting, documentation, validation & verification of the installation for the cooling system routing. Main design work tools are CAD (CREO), Microsoft office and Volvo documentation systems.


The main design area is to install various components on the rear area of the truck (behind cab). The work will be carried out in all phases, from start cost to maintenance. Several new innovative projects are starting up where new installations are needed.


Relevant Experience:
Degree in Mechanical Engineering or similar
Several years of working experience as an engineer and/or designer within automotive engineering
Experience in CAD - Minimum 5 years of experience in 3D-modelling and PDM-systems
Experience in supplier relationships
Ability to work in global teams
Flexible to work both on technical focused activities as well as to perform cross functionally as project leader
English proficiency
Experience in cooling systems is a merit



If you think you are the right candidate for this position, then please don’t hesitate to send us your application! Visa mindre

Lead Engineer Cooling System Routing

Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us? What is our offer? You will be part of the most challengi... Visa mer
Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. We at Volvo Group Trucks Technology are looking for our next Engineering technical leader, working with the transformation from diesel vehicles towards electrification and automation. Do you have what it takes to step into the future with us?


What is our offer?
You will be part of the most challenging and exciting projects ever at Volvo Group, being part of a transfer towards electrification and automation with the target to be NO 1. In the Truck industry. We have the resources and knowledge to do the job, and we now offer you a chance to join us on the journey.


Working with us means working together with many other people with different technical skills and culture, meaning that you will develop your network, your skills and work globally. On top of challenging tasks and great colleagues, we offer you the chance to work in a vibrant international organization with great opportunities for personal development.


Who are we, your new colleagues?
We are a team of 11 enthusiastic engineers that work with cooling systems routing. The team is divided into agile teams dedicated into specific projects or areas. We have the opportunity to work within our true areas of interest and are truly passionate of the problem solving process. The key is to work cross functionally with team members from different backgrounds and cultures. Here we get the opportunity to work with other entities across the world, so if you like to create new relationships with people worldwide, then you´ll make a perfect fit!


Who are you?
We’re searching for a persons that is passionate for mechanical engineering. You needs to be autonomous and enjoy to be in the fore front of different tasks. The person should enjoy puzzles, detective work and team work to find best solutions for the complete installation. You will belong to the Chassis Department within Volvo Group Trucks Technology. Our team is responsible for product updates of Volvo heavy duty range as FM/FH in the area of Cooling system routing. We carry out our work in all stages of product development: Complete Vehicle Projects, Product Maintenance, Advanced Engineering and Component Projects. You will work in close cross-functional cooperation in a multi-cultural environment with both internal and external contacts such as our different development sites around the world.


Your mission as Lead Engineer


Your mission will be as Lead Engineer with product responsibility for maintenance and new development within Chassis Engineering. This task will include Strategic work, creating technical roadmaps as well as responsibility for deliveries and reporting towards projects, suppliers, production, quality, aftermarket etc.


The role includes design work, requirement setting, documentation, validation and verification of the installation for the cooling routing system. Main design work tools are CAD, Microsoft office and Volvo documentation systems. Moreover, a bigger part of your work is leading, motivating and coordinating the product development activities for your area in one or several projects, together with different stakeholders and design engineers.


The main design area is to install various components needed for engine cooling systems. The work contains a lot of packaging. The work will be carried out in all phases, from start cost to maintenance. Several new innovative projects are starting up were new installations is needed.


Qualifications:
Leadership skills
Communication skills driving agenda with several commodities
preferably a degree in Mechanical Engineer or equivalent
Several years of working experience as an engineer within automotive engineering
Experience in design of cooling system
Experience in CAD
English proficiency

If you think you are the right candidate for this position then please don’t hesitate to send us your application.


For further information please contact:
Tomas Alexandersson, Manager CFS&P Cooling System Routing, +46 76 5534883


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Engineering Graduate Program - Sustainable HW Development Engineer

Work with the latest technologies to shape tomorrow's society Imagine yourself working with some of the sharpest and most creative brains in the transport and infrastructure industry, developing cutting-edge technologies and sustainable transport solutions that will change the future of society. The Engineering Graduate program The Engineering Graduate Program at Volvo Group Trucks Technology is a global 12-month program where you are offered the perfec... Visa mer
Work with the latest technologies to shape tomorrow's society
Imagine yourself working with some of the sharpest and most creative brains in the transport and infrastructure industry, developing cutting-edge technologies and sustainable transport solutions that will change the future of society.
The Engineering Graduate program
The Engineering Graduate Program at Volvo Group Trucks Technology is a global 12-month program where you are offered the perfect mix of on-the-job learning and diverse training modules. You will get the chance to use your technical and creative engineering skills while gaining valuable experience working with real products on real business challenges.
Besides your manager, who will guide and support you in your daily job, you will have a supportive network of peer graduates, colleagues across the globe and senior leaders to help you excel. We hope you will learn as much from us as we will from you.
Job description
In this role, you will be part of developing the internal combustion engines of the future. We are standing in front of a change in technology where we need to find ways to make the engines sustainable. This will require new material, new fuels, new development methods, and new verification methods. To succeed we know that we need to be even more skilled in the available virtual tools and methods, as well as develop new ways of working. You will be part of cross functional development teams and work closely with manufacturing, purchasing, aftermarket and our suppliers. Together, with our very skilled and experienced colleagues across the globe, you will learn from the best and join them in the race to build the combustion engines of the future.
What we are looking for:
We are looking for the next generation engineers who want to make a real difference to society. You are passionate about what you do, have a curious mind and are willing to learn. Enjoying and being skilled in collaboration is a key for success in this position and just like us, you thrive on teamwork.
Required knowledge/experience
In order to qualify for the Engineering Graduate program you must have completed a B.Sc. or M. Sc. In Mechanical, Mechatronic or Electrical engineering or similar prior to the start of the?program but not more than 18 months ago. You should not have more than two years full-time working experience prior to starting. You also need to be fluent in English, both written and verbal.
What’s in it for you:
Our Engineering Graduate Program starts in August 2024, and you will be offered a permanent position at Volvo Group Trucks Technology with placement in Sweden, Gothenburg. These are some of the benefits of joining our program:
An opportunity to work with the latest technology
An exciting and global working environment with experienced colleagues


Possibility to gain international experience through a short-term assignment abroad


A competitive salary and permanent position from day one


A variety of workshops and seminars designed to help you grow into your future career at Volvo Group


Possibility to shape your own career with endless career opportunities

Volvo Group Trucks Technology
Volvo Group Trucks Technology is the global research and development organization of the Volvo Group. We provide state-of-the-art research, engineering, product planning and project execution to final delivery and support of today’s and tomorrow’s transport and infrastructure solutions.


Apply
The journey begins! An email confirmation will be sent as soon as you submit your application. After this, it is still possible to update your personal profile by login into your account. The hiring team will review your application together with the hiring manager. Shortlisted candidates will be contacted with information about the following steps.
If you have any questions, please contact:
[email protected]
CV/applications are not accepted by email
Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Mekanikkonstruktör

Vill du utvecklas inom teknik och trivs med att leda andra? Har du tidigare erfarenhet som mekanikkonstruktör eller som team lead? Mekanisk konstruktör som är redo att leda juniora konstruktörer Vi är People First och utvecklar produkter med slutanvändaren i fokus och vi tar hand om vår personal. De kompetenser som behövs för produktutveckling finns på samma våning här på vårt huvudkontor i Göteborg. Vi söker dig som är mekanisk konstruktör och har erfa... Visa mer
Vill du utvecklas inom teknik och trivs med att leda andra? Har du tidigare erfarenhet som mekanikkonstruktör eller som team lead?

Mekanisk konstruktör som är redo att leda juniora konstruktörer

Vi är People First och utvecklar produkter med slutanvändaren i fokus och vi tar hand om vår personal. De kompetenser som behövs för produktutveckling finns på samma våning här på vårt huvudkontor i Göteborg.

Vi söker dig som är mekanisk konstruktör och har erfarenhet av eller är redo att ta steget att leda och utveckla juniora konstruktörer i mekanisk konstruktion i plast och metall för produkter inom Industrial Industry, Consumer och Medtech.

Du behöver i projektform kunna leda i:

- Kravspecifikationshantering

- Konceptgenerering

- Detaljkonstruktion

- DFM

- DFA

- DFMEA

- Produktkravsspecifikationer

Också utföra:

- Driva interna projektmöten där flera avdelningar/kompetenser kan ingå.

- Delta och driva projektmöten med kunden

- Delta i projektförslag och offert för nya projekt

- Kontroll över veckovisa aktiviteter samt arbetade timmar

- Talar och skriver både det svenska och engelska språket obehindrat

Om avdelningen

Inom vårt team Product Engineering hjälper vi till där det behövs och därför kan du få möjligheten att arbeta både via vår inhouse-avdelning eller på plats ute hos våra kunder. I vårt team är teknik det bästa vi vet och vi är övertygade om att teknik frodas av mångfald. Några av oss är uppväxta på en bondgård och en och annan kollega bygger sportbilar. Dessutom får du 600 nya kollegor som arbetar på kontoret på Lindholmen i Göteborg.

Om dig och kompetens

- Erfarenhet som konstruktör av konsument- och industriprodukter av plastdetaljer, integrerad elektronik samt val av maskinelement.

- CAD du behöver ha kolla på är främst Solidworks & PTC Creo. Catia är meriterande.

- Kunskap inom mekaniska komponenter.

- En god kommunikativ förmåga och motiveras av såväl teknik som ledarskap.

- Kunna prata med leverantörer och verkstäder.

- Arbetat med hela produktutvecklingsprocessen och har god förståelse för den.

- Obehindrat behärska både svenska och engelska i skrift och språk.

Du är ute efter vilja ha en långsiktig relation med Semcon och vara med och utveckla vår inhouse-verksamhet Semcon Studios. Samtidigt vara beredd på att det kan bli uppdrag ute hos kund.

Du kan läsa mer om Semcon Studios här (https://semcon.com/sv/erbjudanden/semcon-studios/)

Om Semcon

Semcon är teknikföretaget som sätter människan före tekniken. Vi utgår alltid ifrån slutanvändarens behov och beteenden när vi utvecklar produkter & tjänster. Det är så vi gör skillnad på riktigt runt om i världen - varje dag. För oss är inspiration grunden i allt vi gör. Vi är övertygade om att inspirerade medarbetare som har kul på jobbet vidgar sina perspektiv och presterar som allra bäst. Vi tror starkt på att människor med olika bakgrunder, erfarenheter och perspektiv är viktiga för att göra Semcon till ett bra, utvecklande och roligt ställe att arbeta på. Hos oss får du möjligheten att utvecklas inom Automotive, Industry, Energy, Life Science & Product Information.

Kontaktyta rekryterande chef

Om du har några frågor angående annonsen eller rollen hos Semcon är du välkommen att kontakta Team Manager Johan Pettersson Strömer på [email protected]. Visa mindre

Underhållsingenjör till Volvo Cars Batterifabrik (TBA)

Who are we? Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them. Vad vi erbjuder Som Underhållsingenjör hos oss kommer du vara en viktig kugg... Visa mer
Who are we?

Everything we do starts with people. Our purpose is to provide freedom to move, in a personal, sustainable and safe way. We are committed to simplifying our customers’ lives by offering better technology solutions that improve their impact on the world and bringing the most advanced mobility innovations to protect them, their loved ones and the people around them.

Vad vi erbjuder

Som Underhållsingenjör hos oss kommer du vara en viktig kugge i att förvalta samt hålla hög tillgänglighet i batterimonteringens produktionsutrustningar. Det innebär att du kommer samla in drift-relaterade uppgifter och utifrån data och analyser säkerställa maskinernas prestanda. Du kommer även att utveckla utrustningarna mot morgondagens teknik.

Under första delen av din anställning kommer du arbeta i projektform då vår fabrik tas i drift under slutet av 2025. Du kommer supportera Reliability & Maintainability ingenjörer (R&M) i projekt med din tekniska kompetens samt erfarenhet och under projektet tilldelas ett ansvarsområde som du efter start av produktionen förvaltar.

Vad kommer du att utföra

I rollen som Underhållsingenjör hos oss kommer du att jobba med både förebyggande underhåll (FU) som optimerar utrustningen utifrån resurs/tillgänglighet och avhjälpande underhåll där du tar fram felsökningsdokument och reparationsdokument. Uppdatering av all dokumentation sker även löpande då det behövs. Vid behov kommer du ihop med arbetsledning/planering prioritera och optimera underhållsaktiviteter/resurser.

I rollen ansvarar du för den tekniska delen i serviceavtal vid upphandling tillsammans med inköp och att utvärdera de leverantörer som underhåll använder sig av. Du kommer inom ditt fabriksområde också ansvara för att utrustningsstruktur är uppdaterad i underhållssytemet Maximo, bereda, lägga upp och skrota reservdelar ur förrådet samt att det finns en ersättningsinvesteringsplan för området. 

Du kommer se till att underhållsintressen tillvaratas i projekt där ditt bidrag kommer vara att fokusera på exempelvis reservdelar, förebyggande underhåll, dokumentation och underhållsutbildning. Vidare kommer du delta i utveckling av underhållsprocessen och arbeta med teknik-metodutveckling samt framtagande av nya verktyg inom ditt ansvarsområde.

Din profil

Vi ser att du har en teknisk högskolekompetens eller motsvarande 3 års praktisk yrkeserfarenhet av specialkompetensområden, exempelvis inom el, Plc eller maskinteknik. Vi tror även att du har en god kunskap om produktionsprocessen, mycket god kunskap om underhållsprocesserna och god kännedom om VDM-processen (Value Driven Maintenance). Du har goda kunskaper i både svenska och engelska, muntligt och skriftligt. 

Vidare behöver du ha en god användarkunskap gällande Officepaketet, främst Excel men även andra program används frekvent i rollen, samt mycket god kunskap att hantera företagets underhålls och dokumentationssystem. Meriterande kunskaper i rollen är om du har goda kunskaper av Six Sigma konceptet och kunskaper/erfarenhet av underhållssystemet Maximo. 

Du som person 

Du är en sann teamorienterad person. Med ett både öppet och inlyssnande sätt får du andra att känna förtroende för dig. Som person har du lätt för att kommunicera med andra och att anpassa ditt budskap och informationen du önskar förmedla till olika mottagare. Du är logisk i ditt tänkande och har en lösningsfokuserat förhållningssätt som uppmuntrar dig till att hitta nya vägar och fatta beslut när det behövs. Som person lägger du alltid ett stort fokus på hög kvalitet, nöjd kund och leveransprecision, i allt du tar dig för.

Nyfiken på att veta mer?

Låter det som ditt nästa steg? Välkommen att visa ditt intresse redan idag genom att skicka in din ansökan via vårt rekryteringsverktyg. Vi ser fram emot att lära känna dig bättre och se vad du kan tillföra företaget. Notera att vi inte godtar ansökningar som inkommer via mail på grund av GDPR.

För ytterligare nformation kring tjänsten, var vänlig kontakta, Rekryterande Chef, Joakim Bladh, [email protected].
För frågor relaterade till rekryteringsprocessen, var vänlig kontakta rekryterare, Josephine Fagrell, på mejl: [email protected].

Observera att detta är en intresseanmälan och att vi kommer att kontakta dig så snart vi börjar rekrytera. Urval sker löpande, men rollerna kommer börja tillsättas i början av 2024. Visa mindre

Senior CAE Simulation Engineer - Engine performance & combustion

Our employees describe Volvo Penta as a great place to work, built on respect and commitment. We encourage people to take responsibility and offer exciting assignments in a highly innovated environment. We trust our colleagues to do their best and we always encourage opinions and ideas. The CAE Simulation team at Volvo Penta recognize and encourage curiosity, flexibility, creativity, and happiness. We believe that high performance arises from a varying a... Visa mer
Our employees describe Volvo Penta as a great place to work, built on respect and commitment. We encourage people to take responsibility and offer exciting assignments in a highly innovated environment. We trust our colleagues to do their best and we always encourage opinions and ideas.


The CAE Simulation team at Volvo Penta recognize and encourage curiosity, flexibility, creativity, and happiness. We believe that high performance arises from a varying and challenging work with great opportunities of development, great collaboration, trust and openness and also a good work-life balance.


If you enjoy exploring new ideas, have an open mindset and see improvements and innovation as a source of inspiration, then you will enjoy working at Volvo Penta and with us in the CAE Simulation team. You will be part of an experienced and high-performing simulation & analysis team working within many different simulation areas.


We believe you:
are interested in product development in general and passionate in Simulation and Analysis.
enjoy working in a team and have ability to inspire colleagues around you.
are a positive and forward-thinking person taking own initiatives.
have good collaboration and communication skills (Fluent in English).
have a growth mindset and like to challenge yourself and your colleagues.

Work and role description:


Engine performance and combustion simulations are crucial parts in the traditional ICE (internal combustion engine) development process. These simulations will be even more important in the Volvo Penta transformation to greenhouse gas neutral power solutions, for both marine and industrial applications. Development of efficient and optimized alternative fuel, electromobility, and fuel cell power systems is a key of success.


You will be part of a smaller team that are responsible of exploring, develop and establish new simulation method and models for alternative fuels (CNG, H2 and Methanol). You will support the company with understanding, knowledge and expertise in this new area by help of simulation and analysis. Your results and conclusions will be the base for technical decisions, choice of concepts and future directions.


Your academic degree is M.Sc. or Ph.D. within the field of simulation and analysis. You have experience in 1-D engine performance simulations and/or 3D CFD combustion analysis. The main simulation tools to use are GT-suite and Converge. Some experience in Python is also merited.


In your cover letter please list your qualifications in academic degrees and work experiences.


The CAE Simulation team at Volvo Penta consists of about 20 skilled CAE engineers working within different simulation fields (Engine & Combustion, FEA, CFD, NVH, MBD, TVC, Vehicle & System, Battery). The advantage sitting together in one CAE team is obvious with respect to communication, collaboration, and simulation synergies. We continuously develop and improve our methods and way of working. We use modern commercial CAE simulation software’s and powerful hardware to meet the high set demands and to meet our vision: To become the world leader in sustainable power solutions.


We believe that you have both the competence and personality that will make a difference in our team and organisation.


Warm welcome to join our CAE Simulation team at Volvo Penta!


For further information, please contact:


CAE Simulation Manager: Josef Backhans, phone +46 765534372
HR business partner: Evamari Lönn Hällsås, phone +46 739024066


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Reliability & Maintainability (R&M) Engineer - Volvo Cars Battery Assembly

Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Vad erbjuder vi? Du ... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales.

Vad erbjuder vi?

Du kommer vara en viktig medarbetare som bidrar till nästa generation nyskapande bilar. Tillsammans med kollegor över hela världen kommer du och ditt team att utveckla innovativ bilteknik som sätter människan i centrum – allt för att göra livet mindre komplicerat och mer njutbart för våra kunder. Tillsammans säkerställer vi tillgänglighet i anläggningar, utrustningar och utvecklingsverktyg inom produktutveckling.

Avdelningen är fokuserad mot strategier som driver underhållets tekniska verksamhet och tekniska styrning I syfte att optimera utrustningarnas tillgänglighet, kostnader och processerna som hör till. Tjänsten är förlagd på dagtid och går under IF Metalls avtalsområde.

Vad kommer du att utföra?

Som Reliability & Maintainability (R&M) Ingenjör hos oss kommer du vara en viktig kugge i vårt projekt gällande kommande Batterimonteringsfabriken där vi går från konceptstudie till implementering i fabrik. Detta betyder att du kommer samla in R&M-relaterade uppgifter om befintliga koncept, ge förslag till lämpliga konceptlösningar, ge input till livscykelkostnadsutvärderingen för att det lämpligaste konceptet sett ur ett underhållsperspektiv skall verkställas.

Vidare ansvarar du för att R&M-krav förankras internt, bifoga dessa som en del av RFQ utskicket, genomföra tidig granskning av leverantörers konstruktionsförslag och genom dialog nå en optimal lösning. Du kommer också att medverka vid leverantörsutvärderingen med ansvar för de underhållstekniska aspekterna.
En annan del är att verifiera maskinens påverkan på underhållsorganisationen (arbetstid / kompetens) och förbereder utbildningsprogram och medverka vid FAT och SAT för att granska och testa utrustningen ur ett underhållsperspektiv. Samt vid implementation verifiera att underhålls R&M relaterade ansvarsdelar är uppfyllda samt säkerställa att alla R&M-problem hanteras enligt övertaganderutinen.


Dina färdigheter 

Vi ser att du har en teknisk högskolekompetens eller likvärdig/ motsvarande yrkeserfarenhet, inom specialkompetensområden, till exempel el- eller maskinteknik. Vi tror även att du har en god kunskap om produktionsprocesser, mycket god kunskap om underhållsprocessern VDM och god kännedom om Tooling-processen (Develop Facility, Tooling and Equipment process) samt ME / Toolings organisation.

Du har goda kunskaper i engelska, muntligt och skriftligt, vi ser det som en fördel om du också har goda kunskaper i svenska. Vidare behöver du ha en god användarkunskap gällande Officepaketet, främst Excel men även andra program används frekvent i rollen, samt mycket god kunskap att hantera företagets underhålls och dokumentationssystem.

Meriterande kunskaper för rollen är om du har goda kunskaper av maskindirektivet (Maskinsäkerhet) och kunskaper/erfarenhet av underhållssystemet Maximo.

Du som person 

Du är en sann teamorienterad person med ett både pedagogiskt och inlyssnande sätt får du andra att känna förtroende för dig. Som person har du lätt för att kommunicera med andra och att anpassa ditt budskap så att informationen har rätt nivå beroende på mottagare.
Du är kreativ i ditt tänkande och har en lösningsfokuserad förmåga som uppmuntrar dig till att hitta nya vägar att lösa problem eller att ta ett beslut när det behövs. Som person lägger du alltid ett stort fokus på hög kvalitet, nöjd kund och leveransprecision, i allt du tar dig för.

Nyfiken på att veta mer?

Välkommen med din ansökan redan idag då urval sker löpande. Sista ansökningsdatum är 15 oktober 2023. Notera att vi pga. GDPR tyvärr inte kan behandla ansökningar som inkommit via mail, var vänlig att ansök digitalt genom arbetsannonsen. 

Har du ytterligare frågor kring tjänsten, var vänlig kontakta rekryterande chef Joakim Bladh, [email protected].

För frågor relaterade till rekryteringsprocessen, var vänlig kontakta ansvarig rekryterare Josephine Fagrell, [email protected]. Visa mindre

Design Engineer, Mechanical

MacGregor is a leader in sustainable maritime cargo and load handling with a strong portfolio of products, services and solutions. Shipbuilders, shipowners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with MacGregor. Shape your journey onboard and offshore with us Are You Ready to Engineer the Future? Join MacGregor as a Design Enginee... Visa mer
MacGregor is a leader in sustainable maritime cargo and load handling with a strong portfolio of products, services and solutions. Shipbuilders, shipowners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with MacGregor.
Shape your journey onboard and offshore with us
Are You Ready to Engineer the Future? Join MacGregor as a Design Engineer, Mechanical!
As we continue to pioneer and shape the future of our sector, we're looking for an extraordinary individual to join us on this exciting journey. In this pivotal role, you'll become part of our dynamic, passionate team, transforming the way we approach the mechanical design of equipment.
If you are ready to step into an exciting new role where you can make a significant impact and contribute to the success of MacGregor, apply today! This is an opportunity to be a part of a dynamic, globally recognized company, and work with a supportive team to drive change in the industry.
The location of this position is Gothenburg, Sweden and you will report to the Manager, Design&Global; Coordination.
Main tasks and responsibilities
Design equipment according to technical requirement as defined by contract, class rules and MCG standard within given quality, time and cost
Responsibility for design planning and updating Design Responsible or Design Leader
Follow up of design schedule
Adapt concept to contract requirements
Interface to ship or shore structure
Kinematics of equipment through operation
Weight calculations and technical solutions
Detail design and production of design drawings
Technical correctness of the design and drawings
Planning and follow-up of allocated design work
Production of technical administrative documentation.

What you’ll need to succeed
Education:
B.Sc. in Mechanical Engineering.

Experience:
1 year of hands-on experience with mechanical engineering, ideally within Marine industry.

Competencies:
Mechanical Engineering
Rules and regulations
Design processes and routines
Production knowledge
Installation methods and practices
CAD
Teamwork.

You will be part of
By joining MacGregor, you will be able to work closely with leading industry professionals, developing and implementing new concepts that set the standards in the maritime transportation and offshore industries. We offer our employees the opportunity to be part of a truly global organisation leveraged upon our shared values of Integrity, Quality and Safety. With us you will be part of a collaborative working culture with challenges and opportunities to further develop yourself professionally.
More benefits:
We offer a competitive salary and comprehensive benefits package geared to boost health and wellbeing
All our employees are offered comprehensive Learning & Development opportunities, annual development plan and career progression opportunities
In most of our positions, you have flexible working hours and hybrid work (combination of remote work and on-site work)
At Cargotec, you will join a truly international working environment and support making global trade faster, smarter and more sustainable - smarter cargo flow for a better everyday.

Interested to join?
For further information please contact Rebwar Venya, Manager, Design&Global; Coordination, by email at [email protected]
If you are excited about this opportunity, please submit your application by 22.10.2023!
Please note that the recruitment process for this position is coordinated by our HR team part of Cargotec Business Services based in Bulgaria.
Please note that the interview process may begin before the closing date of the job posting.
#LI-HYBRID
MacGregor is part of Cargotec
MacGregor is a leader in sustainable maritime cargo and load handling with a strong portfolio of products, services and solutions, all designed to perform with the sea.
Shipbuilders, shipowners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with MacGregor. www.macgregor.com
MacGregor is part of Cargotec. Cargotec's (Nasdaq Helsinki: CGCBV) sales in 2022 totalled approximately EUR 4 billion and it employs around 11,500 people. www.cargotec.com Visa mindre

CAE Engineer / Simulations Engineer in Collision Safety

Are you a highly skilled engineer with a passion for collision safety and simulation analysis? Join our team as a Simulations Engineer in Collision Safety and take a leading role in advancing automotive safety technology. We are seeking an experienced professional to run and lead crash CAE (Computer-Aided Engineering) activities within major projects, ensuring the safety of future vehicles. As a Simulations Engineer. you perform simulations/analyses based... Visa mer
Are you a highly skilled engineer with a passion for collision safety and simulation analysis? Join our team as a Simulations Engineer in Collision Safety and take a leading role in advancing automotive safety technology. We are seeking an experienced professional to run and lead crash CAE (Computer-Aided Engineering) activities within major projects, ensuring the safety of future vehicles.

As a Simulations Engineer. you perform simulations/analyses based on instructions or day-to-day guided work verified by upper levels. You provide design input for less complex components or systems. Deliver component models and demonstrate fidelity based on test results, instructions, or other data, and Provide feedback on methods.

Key Responsibilities

• Run & Lead crash CAE activities within a major project start-cost project or have the responsibility of several smaller projects.
• Initiate, Lead and perform simulations.
• Secure that crash simulations are progressing according to approved frames.
• Manage multiple technology areas for crash in the projects.
• Support Design teams in developing technical solutions to fulfill requirements.
• Analyze and evaluate system solutions and propose changes improvements.
• Focus areas will likely be occupant simulations and interior systems CAE analysis. Seats, Steering system, airbags, belt will be the major tasks to analyze.

Qualifications

• Bachelor´s or Master´s degree in Engineering or a related field.
• Several years of experience in CAE crash safety simulations is a must.
• Proficiency in simulation software and tools relevant to collision safety analysis.
• Strong analytical and problem-solving skills.
• Excellent communication and teamwork abilities.
• Self-driven with a high level of initiative.

About the position
The assignment is a consultant position with employment at Adecco. The start will take place as soon as possible after agreement.

Contact
If you have any question about the assignment or the recruitment process, you are welcome to contact responsible recruiter Caroline Carlsson at [email protected] 

If you have any technical issue with the application process, please contact [email protected] 

We do not accept any applications via email.

Let your creativity and technical prowess thrive in a role as engineer with us. Submit your application* in English today and let´s together build the innovations of the future!
*Applicants must possess a valid work permit applicable in the EU region.

Keywords
Mechanical Engineer | Engineering | Simulation & Analysis Engineer | CAE analysis | Automotive | Adecco | Gothenburg Visa mindre

Utvecklingsingenjör Elektromobilitet

Ansök    Sep 18    AFRY AB    Utvecklingsingenjör, maskin
Företagsbeskrivning AFRY erbjuder tjänster inom teknik, design, digitalisering och rådgivning. Vi är hängivna experter inom industri, energi- och infrastruktur, som skapar värde för kommande generationer. AFRY har en global räckvidd med djupa rötter i Norden. Tillsammans accelererar vi omställningen till ett mer hållbart samhälle. Jobbeskrivning Som ett av Sveriges ledande konsultbolag söker vi nu experter inom elektromobilitet. Vi söker dig som vill jo... Visa mer
Företagsbeskrivning
AFRY erbjuder tjänster inom teknik, design, digitalisering och rådgivning. Vi är hängivna experter inom industri, energi- och infrastruktur, som skapar värde för kommande generationer. AFRY har en global räckvidd med djupa rötter i Norden. Tillsammans accelererar vi omställningen till ett mer hållbart samhälle.


Jobbeskrivning
Som ett av Sveriges ledande konsultbolag söker vi nu experter inom elektromobilitet. Vi söker dig som vill jobba i globala projekt med lokala kunder, och som har möjlighet att bidra med din gedigna kunskap, och kanske även leda teamet framåt.


Kravspecifikation
Kommunikation, driv och samarbete är nyckelord. Hos oss jobbar du som systemingenjör, utvecklare eller testare, och vi ser gärna att du har bakgrund inom några av dessa områden:
Batteri-, laddning- eller inverterutveckling, eller relevant kunskap inom HV (400-800V system)
Systemutveckling (Något kravhanteringsverktyg, tex Doors, System-/Carweaver etc)
Implementation (Matlab/Simulink och/eller C/C++)
Testning (Canoe, Canalyzer, CAPL, Python)

I tillägg så är du kunnig inom (några av) följande domäner
Funktions-, cyber- och elsäkerhet (tex ISO26262, ISO21434, ECE R100, UNWP29 etc)
Diagnos (diagnosmonitorering och kommunikation)
Mjukvaruutveckling (både agilt och traditionell utveckling)
Testautomation (CAPL, Python, Automationdesk…)
CI/CD (Git, Gerrit, Jenkins, Zuul …)

Du har B-körkort och ser fram emot att jobba med många nya och utmanande uppgifter.


Ytterligare information
Välkommen med din ansökan! Vänligen notera dock att vi nu går in i semestertider och kommer att gå igenom ansökningarna när vi är tillbaka från semestern. Trevlig sommar!
Några ord från din blivande chef Torgrim:
Som ledare gillar jag att jobba tillsammans med de människor som jag har runt mig, se dessa utvecklas och ta nästa steg. Jag drivs av att se individer växa med uppgifter, att vi tillsammans löser tekniska utmaningar. Jag gillar öppen, rak och ärlig dialog, som är rotad i gemensamma värderingar. Tillsammans jobbar vi för att se till att din egen utveckling prioriteras och arbetar både med utbildningar och uppdrag för att du ska nå dina mål.
Några ord från en blivande kollega, Pujita:
At AFRY you get the chance to be part of a lot of interesting projects and you will notice the great focus on employee satisfaction and diversity!
Välkommen med din ansökan, vi jobbar med löpande urval.


Kontaktpersoner för frågor:
Sektionschef, Torgrim Brochmann, [email protected]
Rekryteringspartner, Ellinor Dahlqvist, [email protected]
At AFRY, we engineer change in everything we do. Change happens when brave ideas come together. When we collaborate, innovate technology, and embrace challenging points of view. That’s how we're making future. We are actively looking for qualified candidates to join our inclusive and diverse teams across the globe. Join us in accelerating the transition towards a sustainable future. Visa mindre

Senior development engineer - Exhaust Aftertreatment System (EATS)

If you are curious and interested in the future, constantly asking yourself how you can do a new or current design smarter & better, then listen up, this can be something for you! Ready to shape tomorrow’s society together with us? Volvo Penta is a world-leading supplier of power solutions for marine and industrial applications. Innovation is our DNA, through our close cooperation with our customers and our century-long experience, we supply comprehens... Visa mer
If you are curious and interested in the future, constantly asking yourself how you can do a new or current design smarter & better, then listen up, this can be something for you!




Ready to shape tomorrow’s society together with us?
Volvo Penta is a world-leading supplier of power solutions for marine and industrial applications. Innovation is our DNA, through our close cooperation with our customers and our century-long experience, we supply comprehensive solutions that are made to move emotions, people, businesses, and societies.


This is us
The Volvo Penta Exhaust Aftertreatment System department are looking for a senior design engineer who are interested in working with development Exhaust Aftertreatment mufflers, urea distribution and system integration. You operate in all design stages within our marine and industrial applications. We believe that you can take the lead in develop the aftertreatment portfolio going forward with challenges as alternative fuels and ultra low emissions. As a person you are curious and strive to take on new possibilities, you like to be involved and you are able to look at the bigger picture as well as going deep down in details. You have the ambition and energy to develop yourself in a way that can lead to new tasks and responsibilities. As a person you enjoy working in a team and like to inspire your team colleagues. You feel engaged by working in projects and reaching goals. Since the job consists of a network of contacts internally and externally, your networking skills are highly valued.

Who are you?
To be successful in the role as design engineer within the Exhaust Aftertreatment System team we believe that you hold a bachelor’s degree or higher and relevant working experience within relevant technical areas such as aftertreatment system and CAD design of complex technical parts. Sheet metal experience within design- or manufacturing engineering is a merit. We use CREO CAD & Creo view software as a daily working tool.
If you like networking, you will enjoy yourself with us. You will network with suppliers, customers, and various parts of the Volvo Group, such as purchasing, production, testing and the other design engineering departments.

We strive for gender balance as we believe that prioritizing a high level of diversity in its full meaning in our workforce creates a competitive advantage. It is our people that make the difference.




For further information, please contact:
Manager Exhaust Aftertreatment System: Mikael Nilsson, telephone 0739027165


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Ingenjör med erfarenhet av egen prototyp- och maskinbyggnad

Företaget Vi är ett innovativt och framgångsrikt teknikföretag som strävar efter att revolutionera gruvindustrin med våra banbrytande lösningar för energieffektiv malning. Vi har sedan 2019 utvecklat teknik för malning och sönderdelning av malmer och mineraler. Vår teknik har i pilottester påvisat kunna spara upp till 80% energi jämfört konventionella produkter på dagens marknad. Vi söker nu nya medarbetare till vårt utvecklingsteam som brinner för produkt... Visa mer
Företaget
Vi är ett innovativt och framgångsrikt teknikföretag som strävar efter att revolutionera gruvindustrin med våra banbrytande lösningar för energieffektiv malning. Vi har sedan 2019 utvecklat teknik för malning och sönderdelning av malmer och mineraler. Vår teknik har i pilottester påvisat kunna spara upp till 80% energi jämfört konventionella produkter på dagens marknad. Vi söker nu nya medarbetare till vårt utvecklingsteam som brinner för produktutveckling, innovativ konstruktion och nytänkande lösningar.

Arbetsuppgifter
I rollen som utvecklingsingenjör på Comminution Reimagined Sweden AB kommer du huvudsakligen arbeta med att ta fram koncept, utforma ock skapa nytänkande och smarta konstruktioner från grunden.
Dina idéer, drivkraft och kreativa lösningar kommer att vara centrala för att uppfylla våra projekt. Vi har ett antal olika prototyper för provningsverksamhet samtidigt som vi har större maskiner i pilotskala.
Bland arbetsuppgifterna ingår uppgifter så som prototypframtagning och -byggnad, teknisk planering, testning och utvärdering. Med tiden kan även certifiering och sökande av patent vara aktuellt. Du kommer att samarbeta och arbeta nära vårt team av erfarna ingenjörer och tekniker för att säkerställa att projektet går smidigt och uppfyller våra högt ställda krav.

Den sökandes bakgrund och kvalifikationer
Vi söker dig som är kreativ och nytänkande samt har en teknisk förståelse för maskinteknik, material- och konstruktionsmetoder samt verklig erfarenhet av att bygga egna konstruktioner eller genomföra motsvarande tekniska projekt. Du har även en hög medvetenhet om förståelse för säkerhetsaspekterna vid drift av maskiner.
Vi tror att du har teknikintresse och maskin-, fordons- eller automatiseringsteknik som fritidsintresse. Självklart i kombination med annat.
Du är social, kommunikativ och trivs med att arbeta tillsammans med andra. På CRS AB arbetar vi nära varandra i en agil miljö och strävar efter en stark kultur karaktäriserad av laganda. Vårt team är internationellt och spänner över flera kontinenter.


Utbildning
Minst en kandidatexamen i teknik eller motsvarande.


Tidigare Erfarenhet
Vi söker dig som har verklig ”hands-on” erfarenhet av att laga, meka, bygga egna konstruktioner. Vi ser gärna att det finns 3 års dokumenterad erfarenhet. Erfarenheten kan komma från skolprojekt, tidigare arbete eller hobbyprojekt (exempelvis mekande med bilar eller andra tekniska konstruktioner).
Du har erfarenhet av CAD-modellering i någon programvara. CRS AB använder Autodesk Inventor, tidigare erfarenheter av Inventor är meriterande men inte ett krav.
Om du har arbetat med prototypframtagning och 3D-skrivare är även det meriterande.

Varför arbeta hos oss?
Vi erbjuder en spännande och dynamisk arbetsmiljö där du får vara med och forma både företagets, industrin och din egen framtid. Vi erbjuder möjligheten att arbeta med innovativa projekt och utveckla banbrytande tekniska produkter som har en viktig roll i omställningen till ett grönare och fossilfritt samhälle.
Vi erbjuder konkurrenskraftig lön och förmåner samt kontinuerlig utveckling för dig som person samt stora möjligheter till att växa inom företaget.

Antar du utmaningen? Ansök då redan idag!
Är du är nyfiken på att få veta mer detaljer om rollen och att bli en del av vårt team, skicka då din ansökan och CV till [email protected] snarast möjliga. Vi anställer löpande!
Ange "Ingenjör med Erfarenhet av Egen Konstruktionsbyggnad" som ämnesrad i ditt mejl.
Vi ser fram emot att höra från dig och utforska möjligheten att arbeta tillsammans för att skapa en mer energieffektiv och hållbar gruvindustri för att försörja samhället med de metaller och mineraler som efterfrågas. Visa mindre

Systems Development Engineer - Test Management

Are you looking for a passionate and collaborative company with the most fantastic colleagues, innovative fantastic products, and a history of continuous development? Join us at Volvo Penta and we have an opportunity for you! We currently have a vacancy for a Systems Development Engineer within our Test Management team at the Testing and Laboratory facility in Gothenburg. Together we make sure that Penta has the tools and system required to develop and t... Visa mer
Are you looking for a passionate and collaborative company with the most fantastic colleagues, innovative fantastic products, and a history of continuous development? Join us at Volvo Penta and we have an opportunity for you!


We currently have a vacancy for a Systems Development Engineer within our Test Management team at the Testing and Laboratory facility in Gothenburg. Together we make sure that Penta has the tools and system required to develop and test the products needed for tomorrow (be it electrical, diesel or hybrid). We have a working environment focused on solutions for the future, where your creativity and ideas are a part of your day-to-day work.


As a Systems Development Engineer you will:


Be a key part of our team working with prioritization, requirements, talking to stakeholders, participate in and drive information flow. As a person you enjoy working in a team and have the ability to inspire your team colleagues. Since the job consists of an extensive network of contacts and forums, both internally and externally your networking skills will be a key focus part of your daily work.
You will actively support daily operations withing the Test Management team and sub-system maintenance to ensure quality and uptime of testing activities and take part in forums that will highlight a need for input or change into the Test Management tools and test facility equipment. You will actively work as part of a scrum team and develop this way of working within the team. This is a key role within our organization as we transform our Product development and future product portfolio to support the Volvo Group strategy for sustainable driveline solutions and science-based targets.




Who you are:


Now we have your attention, do you have what we are looking for?
You have a positive outlook combined with creativity, flexibility, excellent communication skills, technical experience, confidence, and the ability to take decisions based on solid facts.
At Volvo Penta we believe in the concept ‘hire for attitude and learn for skills,’ but certainly some prior knowledge will make it easier:


Qualifications and Experience
In this highly technical field, we encourage applicants with an engineering background in Electrical Engineering, Mechatronics engineering, computer engineering, software engineering, Physics or similar.



Daily experience or a good knowledge of the following formats would be excellent:
Knowledge of engine or product testing
Experience with scrum and agile working
Experience with JIRA or similar issue tracking software
Knowledge of software development, testing, and maintenance



The following would be fantastic too:
Experience within Engine Testing Development & Automated Testing Systems
Knowledge or experience of engine emissions legislation
Passion for organisation and prioritization



We are offering:


The opportunity to take the next step in your career. Stimulating problem solving surrounded by friendly colleagues to inspire and to be inspired by. Here we value your input and respect each other’s work-life balance. We encourage each other to learn new things, supported by learning resources, and you will be offered to develop yourself by new responsibilities and new tasks as time goes by.


Who we are:


Engine Testing Development (ETD) is an energized group within Product Solutions Development and responsible to secure that Test management, Virtual testing environment, test equipment, testing interface and test benches for heavy duty Industrial and Marine engine applications are optimised and fulfil testing requirements according to established routines and legislation. This is the challenge we meet to be able to perform engine test measurement in a quality assured way.


Volvo Penta works actively with diversity and inclusiveness; we create an environment where you can bring your true unique self to work every day. Because we know when each one of us gives our whole selves, we all receive more.


Volvo Penta is a world-leading supplier of engines and complete drive systems for marine and industrial applications, you will be part of a global and diverse team of highly skilled professionals who work with passion, trust each other, and embrace change to stay ahead.


For further information, please contact Simon Anwell,
[email protected]
telephone 031-322 72 72


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Produktionstekniker | Saab | Göteborg

Jefferson Wells söker idag dig som vill arbeta på Saab i Göteborg som produktionstekniker! Ser du dig trivas i en bred roll vad gäller tillverkning av produkter och optimering av produktionsflöden? Har du tidigare erfarenhet av arbete med komplexa produkter och gärna med en bakgrund inom elektronik eller maskinteknik? Varmt välkommen med din ansökan redan idag! Saab har behov av produktionstekniker i flertalet inriktningar, i tillverkning, maskin och utru... Visa mer
Jefferson Wells söker idag dig som vill arbeta på Saab i Göteborg som produktionstekniker! Ser du dig trivas i en bred roll vad gäller tillverkning av produkter och optimering av produktionsflöden? Har du tidigare erfarenhet av arbete med komplexa produkter och gärna med en bakgrund inom elektronik eller maskinteknik? Varmt välkommen med din ansökan redan idag!

Saab har behov av produktionstekniker i flertalet inriktningar, i tillverkning, maskin och utrustning samt systemprovning.

Ort: Göteborg
Start: Omgående
Omfattning: 100%
Uppdrag: Konsultuppdrag hos Jefferson Wells men du arbetar ute hos Saab. Tjänsterna är på tre månader.

I rollen som produktionstekniker
Som produktionstekniker arbetar du nära operatörer och tillverkningschefer i en del av ett tillverkningsflöde samt kommer ingå en större grupp av produktionstekniker där ni stöttar och hjälper varandra.
I rollen ingår bla att ha produktkännedom, förstå tillverkningsflödet, analysera avvikelser och identifiera förbättringar så att vi bidrar till att leverera kvalitet från första exemplar.

Vanligt förkommande arbetsuppgifter:

* Proaktivt vårdar och optimerar tillverkningsflöde och tillverkningsprocesser.
* Stöttar i analys av mätetal och ge förslag på åtgärder.
* Säkerställer att nya moment och nya tekniker kan hanteras av operatörer.
* Hanterar felutfall kopplat till tillverkningsprocess.
* Utföra projektuppgifter så som att skapa och vårda beredningar, routings, instruktioner, hantera avvikelser samt andra projektuppdrag.
* Viss support och stöttning till våra operatörer.
* Delta i operativa möten och avstämningar och hantering av aktiviteter initierade ur dessa.

Vem är du?
Du har erfarenhet av arbete med komplexa produkter, gärna med elektronik/maskinbakgrund. Erfarenhet från tillverkning och/eller produktionsteknik och/eller produktutveckling är meriterande Du bör ha en ingenjörsutbildning inom mekanik/mekatronik/el eller liknande för den här rollen. Vi tror att du som person kännetecknas av ett stort ansvarstagande. Du är öppen för att utmana befintliga arbetssätt i syfte att hitta nya effektiva lösningar. Du har kunskaper och erfarenhet av att arbeta med Lean Production. Vårt affärssystem är IFS och tidigare erfarenheter av att jobba i detta system är meriterande

Som person är du drivande, bra på att kommunicera och har en vilja att ständigt förbättras. Du kan hålla många bollar i luften och du är inte rädd för nya utmaningar. Som person krävs det att du är flexibel, utåtriktad och har god samarbetsförmåga.

Vad vi på Jefferson Wells kan erbjuda dig:

Jefferson Wells är specialister på kompetensförsörjning av chefer och specialister. Vi är ett av få bolag som samarbetar med företag, myndigheter och organisationer inom privat och offentlig sektor i hela Sverige. Våra konsultchefer har gedigen kunskap inom just ditt område. Som konsult hos oss är din karriär och utveckling alltid i fokus. Vår verksamhet bygger på att våra anställda trivs och utvecklas. Vi erbjuder en trygg anställning med allt vad det innebär: månadslön, kollektivavtal, försäkringar m.m. Läs mer om hur det är att vara konsult på Jefferson Wells: https://www.jeffersonwells.se/sv/karriar/konsult-pa-jefferson-wells

Ansökan

Varmt välkommen med din ansökan genom att registrera ditt CV, urval sker löpande.

Har du frågor om tjänsten eller rollen som konsult är du välkommen att kontakta talent acquisition specialist Filippa Müntzing på mejl [email protected] Visa mindre

E-fan Development Engineer

Are you passionate about thermal management and sustainable transport solutions? Do you have the drive and ambition to contribute to the success of a highly qualified global team? We are now looking for an e-fan development engineer for thermal management to join us on our journey! This is us, your new colleagues! At Thermal Management we are responsible for developing and maintaining optimized vehicle cooling and heating systems for all types of propu... Visa mer
Are you passionate about thermal management and sustainable transport solutions? Do you have the drive and ambition to contribute to the success of a highly qualified global team?
We are now looking for an e-fan development engineer for thermal management to join us on our journey!


This is us, your new colleagues!


At Thermal Management we are responsible for developing and maintaining optimized vehicle cooling and heating systems for all types of propulsion installations for all truck brands within the Volvo Group. We own the strategies for our technical areas and are accountable for securing the quality of the solutions that we deliver to our customers worldwide. We are a diverse, global and highly qualified team of engineers with extensive experience from developing vehicle thermal management systems. Within Thermal Management we value strong technical skills, accountability for our deliveries and a customer focused mindset, and we are convinced that everything is possible if we do it together.


What you will do?


Your role in the Cooling Module Hardware team within Thermal Management will be to develop e-fan solutions that will be key to achieve optimized vehicle thermal systems securing tasks connected to the overall Thermal Management roadmap. You will perform this work in close collaboration with our suppliers and cross-functional network. You will do this with great passion by applying and continuously developing your technical skills as well as your ability to make a team collaborate efficiently to reach a common goal.


Who are we looking for?
In order to be successful in this role it is important that you recognize yourself in the following description:-


Relevant Experience
Solid experience from development of electrical and thermal hardware components within the automotive or transportation industry
Solid knowledge in thermodynamics and development of mechatronic components
Knowledge in vehicle software development and embedded electronic
Structured way of working and ability to deliver on complex tasks with excellence
You are a true team player, self-driven with positive, global and problem solving mind-set and you possess excellent communication skills
Fluent in English, both written and spoken

Meritorious to have
Knowledge of CAD tools and Volvo systems

Applicants shall have a M.Sc degree in Mechanical, Mechatronics or Electronic Engineering or equivalent relevant work experience.


We Value Your Wellbeing


Volvo Group believes in diversity, equity, and inclusion and offers a safe environment to grow. Use your open mind and can-do attitude to help us steer our transportation solutions toward a more sustainable tomorrow.


About Volvo Group


Every day across the globe, our trucks, buses, engineers, construction equipment, and financial services make modern life possible.
We offer an ethical culture dedicated to caring about others and the world in which we live. We are committed to shaping the future landscape of efficient and sustainable transport and infrastructure solutions to leave it in better shape for the next generation.


Come, join us as we take our solutions into a new era and make modern life possible. Let's drive progress together.


If you would like to know more about the position, you are welcome to contact:


Tiago Rosso – Group Manager, BEV, Fuel Cell Cooling Module Hardware - [email protected]


Ready for the next move?


Does this sound like your next challenge? In that case we are eager to hear from you and look forward to receiving your application as soon as possible.


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Process Management and Development within Volvo Autonomous Solutions!

Would you like to be part of defining and driving the development of the future autonomous transport solutions for the Volvo Group? Are you a passionate engineer who loves to drive the development of new ways of working and to work with cross-functional partners, customers and colleagues around the world? Do you enjoy teamwork and developing yourself and others to meet future challenges? Then take the opportunity to join the exciting journey we are sailing... Visa mer
Would you like to be part of defining and driving the development of the future autonomous transport solutions for the Volvo Group? Are you a passionate engineer who loves to drive the development of new ways of working and to work with cross-functional partners, customers and colleagues around the world? Do you enjoy teamwork and developing yourself and others to meet future challenges? Then take the opportunity to join the exciting journey we are sailing on when creating the future autonomous solutions for our customers as well as building a sustainable working environment characterized by trust, openness and wellbeing.


This is us, your new colleagues:


This is a role within the Process, Certification and Documentation (PCD) team. The mission of the PCD team is to build the common foundation for Processes, Certification and Documentation that comply with laws and regulations through:
Leading the development, documentation and maintenance of common ways of working
Securing quality-assured end-to-end product documentation
Driving a culture focused on collaboration, quality, environment, health and safety

The purpose of the Process Management and Development role is to lead and coach the line organization in the development, evaluation and improvement of ways of working.
The cornerstones for our team are teamwork and engagement, having fun together and supporting each other in our daily work. In our team, we value the strength given by differences in background, knowledge, age, gender, and nationality.
We are currently a team of 7 passionate engineers and we are now looking for a great colleague for the Process Management and Development role to join our team.


This is what you will do


You will work cross-functionally with stakeholders across the whole Volvo Autonomous Solutions organization as well as with relevant stakeholders within other parts of the Volvo Group. As we are a start-up inside the Volvo Group, we desire a hands-on, creative, “roll up your sleeves” individual that will help us build our company. You will work throughout the whole process lifecycle: from the strategic level where you will be part of defining the business process strategy and process roadmap to leading working groups in analyzing, defining, developing, documenting and continuously improving the business processes. An important part of your responsibility is to prioritize between competing needs and to seek interface agreements with related business processes as well as to prepare decision material and lead the work with the decision forum Process Advisory Group and business process working groups.


Who are you? Are we a perfect match?


We believe you are a person with great people skills, who enjoys developing teams and yourself as well as interacting with different stakeholders. You have a positive mind-set and can-do attitude, with a holistic perspective and good communication skills. Since an important part of this position is to establish and maintain a close collaboration with different stakeholders across the whole organization, it is important to understand stakeholders’ needs, expressed and unexpressed, and to cooperate within and across teams with contradicting priorities and different goals to create value. As a person, you are a solution-oriented team player with ability to put the interests of others above your own, ready to do what is needed to make the team and the organization more efficient. You are also a person that learns fast and has strong analytical skills, i.e. use logic and reasoning to identify strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
You will cover a wide span of processes, from very detailed in one specific technology area to processes involving also other Business Areas in the Volvo Group, which requires that you can understand new contexts, products, and solutions quickly and efficiently while being able to prioritize with a structured approach. You are also open to work in a completely new context where we together are the motivators to make the future of automated transport solutions happen. As our business area is new you need to share our positive spirit and curiosity for new technology and want to take it to the next level.


Other important qualifications for the position:
Master of Science in Engineering or equivalent experience
Experience from managing large projects or end to end processes with limited oversight from manager
Experience from business process development methodologies and process development work
Experience from coaching individuals and teams
Experience from work with Quality Management
Knowledge about business process development methods and tools
Knowledge and experience in Change Management
Knowledge of vehicle technology
Fluency in spoken and written English

What can we offer?


You get an opportunity to work together with highly skilled and supportive colleagues in an exciting, global environment that provides opportunities to develop both professionally and personally. Our daily work is performed in an international environment allowing interaction with highly committed colleagues from different cultures. We trust each other and act as a team, stay close to the product and provide opportunities for professional and personal growth. This is where you fit right in!


We look forward to receiving your application!


If you have any questions, please get in touch:


Sead Canovic, Global Technology Manager for Process, Certification and Documentation, Phone +46 76 5536482


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Produktionstekniker | Saab | Göteborg

Jefferson Wells söker idag dig som vill arbeta på Saab i Göteborg som produktionstekniker! Ser du dig trivas i en bred roll vad gäller tillverkning av produkter och optimering av produktionsflöden? Har du tidigare erfarenhet av arbete med komplexa produkter och gärna med en bakgrund inom elektronik eller maskinteknik? Varmt välkommen med din ansökan redan idag! Saab har behov av produktionstekniker i flertalet inriktningar, i tillverkning, maskin och utru... Visa mer
Jefferson Wells söker idag dig som vill arbeta på Saab i Göteborg som produktionstekniker! Ser du dig trivas i en bred roll vad gäller tillverkning av produkter och optimering av produktionsflöden? Har du tidigare erfarenhet av arbete med komplexa produkter och gärna med en bakgrund inom elektronik eller maskinteknik? Varmt välkommen med din ansökan redan idag!

Saab har behov av produktionstekniker i flertalet inriktningar, i tillverkning, maskin och utrustning samt systemprovning.

Ort: Göteborg
Start: Omgående
Omfattning: 100%
Uppdrag: Konsultuppdrag hos Jefferson Wells men du arbetar ute hos Saab. Tjänsterna är på tre månader.

I rollen som produktionstekniker
Som produktionstekniker arbetar du nära operatörer och tillverkningschefer i en del av ett tillverkningsflöde samt kommer ingå en större grupp av produktionstekniker där ni stöttar och hjälper varandra.
I rollen ingår bla att ha produktkännedom, förstå tillverkningsflödet, analysera avvikelser och identifiera förbättringar så att vi bidrar till att leverera kvalitet från första exemplar.

Vanligt förkommande arbetsuppgifter:

* Proaktivt vårdar och optimerar tillverkningsflöde och tillverkningsprocesser.
* Stöttar i analys av mätetal och ge förslag på åtgärder.
* Säkerställer att nya moment och nya tekniker kan hanteras av operatörer.
* Hanterar felutfall kopplat till tillverkningsprocess.
* Utföra projektuppgifter så som att skapa och vårda beredningar, routings, instruktioner, hantera avvikelser samt andra projektuppdrag.
* Viss support och stöttning till våra operatörer.
* Delta i operativa möten och avstämningar och hantering av aktiviteter initierade ur dessa.

Vem är du?
Du har erfarenhet av arbete med komplexa produkter, gärna med elektronik/maskinbakgrund. Erfarenhet från tillverkning och/eller produktionsteknik och/eller produktutveckling är meriterande Du bör ha en ingenjörsutbildning inom mekanik/mekatronik/el eller liknande för den här rollen. Vi tror att du som person kännetecknas av ett stort ansvarstagande. Du är öppen för att utmana befintliga arbetssätt i syfte att hitta nya effektiva lösningar. Du har kunskaper och erfarenhet av att arbeta med Lean Production. Vårt affärssystem är IFS och tidigare erfarenheter av att jobba i detta system är meriterande

Som person är du drivande, bra på att kommunicera och har en vilja att ständigt förbättras. Du kan hålla många bollar i luften och du är inte rädd för nya utmaningar. Som person krävs det att du är flexibel, utåtriktad och har god samarbetsförmåga.

Vad vi på Jefferson Wells kan erbjuda dig:

Jefferson Wells är specialister på kompetensförsörjning av chefer och specialister. Vi är ett av få bolag som samarbetar med företag, myndigheter och organisationer inom privat och offentlig sektor i hela Sverige. Våra konsultchefer har gedigen kunskap inom just ditt område. Som konsult hos oss är din karriär och utveckling alltid i fokus. Vår verksamhet bygger på att våra anställda trivs och utvecklas. Vi erbjuder en trygg anställning med allt vad det innebär: månadslön, kollektivavtal, försäkringar m.m. Läs mer om hur det är att vara konsult på Jefferson Wells: https://www.jeffersonwells.se/sv/karriar/konsult-pa-jefferson-wells

Ansökan

Varmt välkommen med din ansökan genom att registrera ditt CV, urval sker löpande.

Har du frågor om tjänsten eller rollen som konsult är du välkommen att kontakta talent acquisition specialist Filippa Müntzing på mejl [email protected] Visa mindre

E-fan Development Engineer

Are you passionate about thermal management and sustainable transport solutions? Do you have the drive and ambition to contribute to the success of a highly qualified global team? We are now looking for an e-fan development engineer for thermal management to join us on our journey! This is us, your new colleagues! At Thermal Management we are responsible for developing and maintaining optimized vehicle cooling and heating systems for all types of propu... Visa mer
Are you passionate about thermal management and sustainable transport solutions? Do you have the drive and ambition to contribute to the success of a highly qualified global team?
We are now looking for an e-fan development engineer for thermal management to join us on our journey!


This is us, your new colleagues!


At Thermal Management we are responsible for developing and maintaining optimized vehicle cooling and heating systems for all types of propulsion installations for all truck brands within the Volvo Group. We own the strategies for our technical areas and are accountable for securing the quality of the solutions that we deliver to our customers worldwide. We are a diverse, global and highly qualified team of engineers with extensive experience from developing vehicle thermal management systems. Within Thermal Management we value strong technical skills, accountability for our deliveries and a customer focused mindset, and we are convinced that everything is possible if we do it together.


What you will do?


Your role in the Cooling Module Hardware team within Thermal Management will be to develop e-fan solutions that will be key to achieve optimized vehicle thermal systems securing tasks connected to the overall Thermal Management roadmap. You will perform this work in close collaboration with our suppliers and cross-functional network. You will do this with great passion by applying and continuously developing your technical skills as well as your ability to make a team collaborate efficiently to reach a common goal.


Who are we looking for?
In order to be successful in this role it is important that you recognize yourself in the following description:-


Relevant Experience
Solid experience from development of electrical and thermal hardware components within the automotive or transportation industry
Solid knowledge in thermodynamics and development of mechatronic components
Knowledge in vehicle software development and embedded electronic
Structured way of working and ability to deliver on complex tasks with excellence
You are a true team player, self-driven with positive, global and problem solving mind-set and you possess excellent communication skills
Fluent in English, both written and spoken

Meritorious to have
Knowledge of CAD tools and Volvo systems

Applicants shall have a M.Sc degree in Mechanical, Mechatronics or Electronic Engineering or equivalent relevant work experience.


We Value Your Wellbeing


Volvo Group believes in diversity, equity, and inclusion and offers a safe environment to grow. Use your open mind and can-do attitude to help us steer our transportation solutions toward a more sustainable tomorrow.


About Volvo Group


Every day across the globe, our trucks, buses, engineers, construction equipment, and financial services make modern life possible.
We offer an ethical culture dedicated to caring about others and the world in which we live. We are committed to shaping the future landscape of efficient and sustainable transport and infrastructure solutions to leave it in better shape for the next generation.


Come, join us as we take our solutions into a new era and make modern life possible. Let's drive progress together.


If you would like to know more about the position, you are welcome to contact:


Tiago Rosso – Group Manager, BEV, Fuel Cell Cooling Module Hardware - [email protected]


Ready for the next move?


Does this sound like your next challenge? In that case we are eager to hear from you and look forward to receiving your application as soon as possible.


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Laboratory Development Engineer

Do you want to drive change? Do you have a can-do attitude and enjoy teamwork? Would you like being a part in shaping the future of transportation technology? We are looking for a new team member to continue develop our world class, automotive laboratory for future sustainable drivelines and products within heavy-duty trucks. This is us, your new colleagues Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, mainte... Visa mer
Do you want to drive change? Do you have a can-do attitude and enjoy teamwork? Would you like being a part in shaping the future of transportation technology? We are looking for a new team member to continue develop our world class, automotive laboratory for future sustainable drivelines and products within heavy-duty trucks.


This is us, your new colleagues


Testing, Verification and Materials Technology (VT&MT;) is responsible for the operation, maintenance, and development of heavy-duty drivelines testing (engine, transmission, electromobility and Fuel Cells/Hydrogen) and materials technology laboratories. We work both local and global to deliver high-quality results and expert functions within our areas of responsibility. We cooperate close with product owners, technology owners, certification, and compliance as well as other functions. We have test facilities and laboratories where a mix of theory and practical work is necessary in order to deliver and develop within present and new technologies. VT&MT; is a part of Powertrain Engineering, Group Trucks Technology (GTT) located in Gothenburg.


About the role


As a Development Engineer, you will lead and deliver various development activities, where creativity, quality and flexibility are of prime importance and keys to success. You will be the technical advisor in our development projects. You will work in tight cooperation with Volvo product development engineers, maintenance and operation engineers, project managers, suppliers, and subcontractors.


You will act as a mentor on the technical equipment and methods used in the Lab and will support the teams with advice and educational courses.
You will balance your time between office work and work in the Lab.


You will be part of the method and technical development team with different expertise areas (software, emissions, measurements, electronics, fluids, mechanical etc.). All work together with one target: to develop world class test facilities and methods.


Scope of your mission


To develop your specialist knowledge, drive, and lead development to create sustainable solutions, strategies & methods within Test Cell electronics, electrical load Units, measurements & equipment aligned with future demands, like:
Measurement equipment and sensors for test cells and on road testing
Electrical load systems (dynamometer systems, battery simulators, etc.)
Test Cell electronics (measurements & systems, sensors, signal handling & quality, I/O systems, regulation, programming/PLC-systems, test cell electronic/electrical design)

Act as a technical expert, working with technical specifications and the projects related to combustion engine, fuel cell, transmission, and electromobility testing. For example, understanding the product project requirements, translating them into rig specifications, secure common standards and define technical solutions. You will also be part of the realization and commissioning of test cell investment projects.
With your technical passion, you will lead technical investigations and technical teams. This includes performing pre-studies, benchmarking, and choosing the best solutions following quality, accuracy, reliability, maintainability, and legal demands by working in close cooperation with equipment suppliers and networking.


Additional responsibilities are:
Share knowledge and provide expert support within all levels in the organization and work closely with engineering customers to understand their needs.
Lifelong learning, continuously develop yourself and your colleagues.

We are looking for you…


… with personal attributes that are key for success, such as flexible, a positive mindset and can-do attitude. You love to inspire, develop, and motivate your colleagues and yourself, building relationships on a local and global level. With your team spirit, you want to be an important team player, putting the team in first place, ready to do what is needed to make the team more efficient. Strong action will make you take own initiatives when something needs to be done or improved and does that with enthusiasm and high energy.


Requirements:
University degree in Electronic/Electrical Engineering or equivalent education/experience.
Theoretical and hands-on experience from laboratory testing measurement equipment, test cell electronics & electrical systems and signal handling
Experience from being responsible for defining state-of-the-art technology and identifying future trends as well as driving innovation of new solutions and concepts.
Holistic view and analytical ability to understand future testing demands, coordinate & synchronize testing demands into plans (test facility road map).
English proficiency (verbal and written) – Swedish is a merit!

Additionally, we highly value the experience within the area of automotive testing activities, in product development, test engineering or lab development.


Ready for the next move?


If our entrepreneurial spirit, adaptability, and customer-focused mindset light your inner fire, we might be a great match! If you want to make a real impact in your career, the transportation business is where you want to be.


Due to summer vacations, all interviews will be held from week 34. Please do not expect any communication earlier than this. We look forward to receiving your application! Apply here!


For additional information, please contact
Robert Aslan, Manager Method & Technical Development, at +46 739025312.


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

VOLVO Test Engineer_Level 4

Job Posting Start Date: 2023-06-19 Job Posting End Date: 2024-06-10 Location: Göteborg Details Job Posting ID: VOLGJP00031022 Job Posting Title: SE_Test Engineer_Level 4 Description: Volvo Penta is looking for a Calibration Engineer. We believe that you have a genuine interest of working within testing and optimization of diesel engines and we expect that you have both the knowledge of fundamental combustion theory and experience of developing Diesel... Visa mer
Job Posting Start Date: 2023-06-19
Job Posting End Date: 2024-06-10
Location: Göteborg
Details
Job Posting ID: VOLGJP00031022
Job Posting Title: SE_Test Engineer_Level 4
Description: Volvo Penta is looking for a Calibration Engineer.
We believe that you have a genuine interest of working within testing and optimization of diesel engines and we expect that you have both the knowledge of fundamental combustion theory and experience of developing Diesel Engines.

About us:
Marine Engine Testing and Calibration within Product Development is responsible for testing and optimization of both Hardware and Software regarding performance, emission and durability of all our Marine Diesel Engines from 2 to 16 litres.
The department is today about 15 Engineers working in different projects.
As a Calibration Engineer, you will be responsible for delivering test and optimization tasks. You will be a part of a project team within the Marine Development and Calibration team.

Main tasks and responsibilities:
Optimization tasks can be all from a sensor linearization to final complete engine software setting for production. You will be responsible for delivering the optimization for a specific engine.
We use advanced tools such as ENE and DoE for screening and calibration.
Other tools used are ATI Vision (calibration and data acquisition), DTECS (Volvo specific Development Tool for Embedded Control Systems), Concerto (a generic data post-processing and evaluation tool) etc.
Tests and optimization tasks can be run both in test cells and in real applications such as off road vehicles.
We look for a team member who is interested in Product Development in general, but preferably towards testing and optimization of diesel engines. Since the job consists of a net of contacts internally and externally, your networking skills are highly valued.


Requirements:
• Your CV should contain listed qualifications in academic degrees B.Sc. or M.Sc.
• Several years of experience in diesel engine development.
• You should be able to communicate in both English and Swedish
• Have a valid driver license.

Level 4: >10 years of experience in the domain
Öppen för alla
Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov. Visa mindre

Development engineer

Testing & Laboratory is looking for two Development Engineers Imagine yourself working in an environment focused on solutions for the future where creativity and new ideas is a part of your day-to-day work. And within a team where we premier curiosity and an open-minded attitude as we know that is our key to success. Do you have the desire and energy to develop yourself in a way that can lead to new tasks and responsibilities? Do you feel engaged by wo... Visa mer
Testing & Laboratory
is looking for two
Development Engineers


Imagine yourself working in an environment focused on solutions for the future where creativity and new ideas is a part of your day-to-day work. And within a team where we premier curiosity and an open-minded attitude as we know that is our key to success.


Do you have the desire and energy to develop yourself in a way that can lead to new tasks and responsibilities? Do you feel engaged by working in projects and reaching goals together with your colleagues and have the ability to inspire and lead others - then we are looking forward to reading your application!


Volvo Penta is happy to announce that we are now recruiting a Senior Development Engineer.
We believe that you have a genuine interest of working within testing and optimization of engines/power systems and we expect that you have both the knowledge of fundamental combustion theory and experience of developing vehicle/vessel drivelines.


About us:


Marine Development & Calibration within Product & Solutions Development is responsible for testing and optimization of both Hardware and Software regarding performance, emission, and durability of all our marine drivelines.


The department is today about 17 Engineers working in different projects.


As a Development Engineer, you will be responsible for delivering test and optimization tasks. You will be a part of a project team within Marine Development & Calibration.


Main tasks and responsibilities:


Tests and tasks can be everything from a specific comparison measurement, a durability test, or a complete hardware selection for a project. You will plan, run, analyze, and report all different types of tests.
Optimization tasks can be all from a sensor linearization to final complete engine software setting for production. You will be delivering the optimization for a specific engine.


Tests and optimization tasks can be run both in test cells and actual marine applications.


We are looking for candidates with passion and ability to lead the way in our development work, a team member who is interested in technology development in general, but preferably towards testing and optimization of power systems and drivelines. Since the job consists of a net of contacts internally and externally, your networking skills are highly valued.
Previous experience from working with alternative fuels (hydrogen, methanol is a merit.


Requirements:
Your CV should contain listed qualifications in academic degrees B.Sc. or M.Sc.
Several years of experience in internal combustion engine development.
You should be able to communicate in both English and Swedish
Have a valid driver license.



Our trademark at Volvo Penta is innovation as we are always looking for fresh ideas, and your attitude and mind-set will be a key asset for us. We strive for gender balance as we believe that actively prioritizing a high level of diversity in our workforce creates competitive advantage.


It is our people that make the difference!


For further information, please contact:


Manager Fredrik Brodén, telephone; +46 31 322 83 03


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Mechanical Engineering

SCALINQ is looking for a seasoned Senior Mechanical Engineer to join our team, with a focus on cryogenic hardware development. If you are an expert in 3D modeling, thermal load simulation, and mechanical simulation, and have a deep understanding of design for manufacturing and supply chain optimization, we'd love to hear from you! SCALINQ is a spin-off from Chalmers University of Technology, and its pioneering research initiative focusing on developing a ... Visa mer
SCALINQ is looking for a seasoned Senior Mechanical Engineer to join our team, with a focus on cryogenic hardware development. If you are an expert in 3D modeling, thermal load simulation, and mechanical simulation, and have a deep understanding of design for manufacturing and supply chain optimization, we'd love to hear from you!
SCALINQ is a spin-off from Chalmers University of Technology, and its pioneering research initiative focusing on developing a full-stack, large-scale quantum computer. SCALINQ currently offers a product line of sample holders, LINQER. Sample holders sit the closest to the quantum processor unit (QPU) and it is vital for its performance. In our research, we are already developing the next generation of LINQER as well as multiple other needed solutions for facilitating the advancements within Quantum Computers.
Responsibilities:
Lead the design and development of cryogenic hardware systems, from concept to production
Can use software such as Autodesk Inventor, Fusion360 or SolidWorks for 3D modeling to create detailed designs and prototypes
Study thermal load model and mechanical performance using software such as ANSYS, COMSOL or Abaqus
Work closely with the manufacturing team to ensure that designs can be effectively and efficiently manufactured using techniques like DFM (Design for Manufacturability)
Optimize supply chain processes to ensure the timely and cost-effective delivery of hardware systems using tools such as SAP or Oracle

Requirements:
Master's degree in Mechanical Engineering or a related field
At least 5 years of experience in hardware development (preferably cryogenic hardware)
Proficiency in software such as Autodesk Inventor, Fusion360, SolidWorks, ANSYS, COMSOL, Abaqus, SAP, Oracle
Strong knowledge of design for manufacturing and supply chain optimization
Excellent communication and leadership skills, with the ability to work effectively in a team environment



If you have a passion and/or interest in cryogenic hardware development and want to be part of realizing the breakthrough technology that is Quantum Computing? Are you also looking to work in a dynamic team and a rapidly growing company? Well then, you are looking for SCALINQ! Please send us your resume and cover letter highlighting your relevant experience and qualifications.
About the team
Diversity and inclusion sit at the heart of SCALINQ. Our biggest strength is the people that define our company. Everyone contributes in their own unique ways and with their particular skill sets. We have successfully combined research-based competencies with conventional engineering to create commercially viable solutions. The team is co-located at our head office in Gothenburg but we also have a presence in Chicago, USA.
What we offer
We have a multicultural environment that is filled with skilled and creative colleagues and encourages people to make their ideas happen. At SCALINQ, you can have an impact like nowhere else. We all help each other to build new skills and best practices through the diversity of our backgrounds and perspectives – while having a lot of fun in the process. Our culture is highly rooted in responsibility, inclusiveness, and passion. We are a team of ambitious and energetic individuals and we are in it for the long haul! We value a healthy life/work balance and we are all about celebrating the small as well as large successes. Sounds like fun? Then we'd love to get to know you!


Psst!!! We have to mention that our office is in the heart of Gothenburg, near restaurants, training centers, and public transport as well as close proximity to Chalmers University. Visa mindre

Senior design Engineer

Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. Do you have what it takes to step into the future with us? What is our offer? You will be part of the most challenging and exciting projects ever at Volvo Group, being part of a transfer towards electrification and automation with the target to be no 1. In the Truck industry. We have the resources... Visa mer
Volvo Group is building the future. Soon our roads will consist of autonomous vehicles and sustainable transport solutions – and we are the ones creating it. Do you have what it takes to step into the future with us?


What is our offer?


You will be part of the most challenging and exciting projects ever at Volvo Group, being part of a transfer towards electrification and automation with the target to be no 1. In the Truck industry. We have the resources and knowledge to do the job, and we now offer you a chance to join us on the journey.




Working with us means working together with many other people with different technical skills and culture, meaning that you will develop your network, your skills and work globally. On top of challenging tasks and great colleagues, we offer you the chance to work in a vibrant international organisation with great opportunities for personal development.


Who are we, your new colleagues?


You will belong to the Chassis Department within Volvo Group Trucks Technology. Our team is responsible for product updates of Volvo heavy duty range as FM/FH around Electrical power distribution high and low voltage including component and also within Pneumatic installation for brakes suspension etc. We carry out our work in all stages of product development: Complete Vehicle Projects, Product Maintenance, Advanced Engineering and Component Projects. You will work in close cross-functional cooperation in a multi-cultural environment with both internal and external contacts such as our different development sites around the world.


Your mission as Lead Engineer


Your mission will be as Senior Engineer with product responsibility for maintenance and new development within Chassis Engineering. This task will include responsibility for deliveries and reporting towards projects, suppliers, production, quality, aftermarket etc.


The role includes design work, requirement setting, documentation, validation, and verification of the products. Main design work tools are CAD, Microsoft office and Volvo documentation systems.


Who are you?


We are working in a global context, creating the future, which we believe that the most important thing is that you are open minded and sociable with energy, passion, and respect for the individuals.


We believe you have a general technical interest and are curious about how to create the best possible products. You should also be able to take own initiatives, be committed to finalize the tasks, be flexible in planning and have a strong driving for improvements.


Qualifications:
Engineering degree
Preferably Several years of working experience as an engineer within automotive engineering
Skilled in CAD, preferably PTC Creo
English proficiency



If you think you are the right candidate for this position then please don’t hesitate to send us your application.


For further information please contact: Mats Sanborn, +46 (0)739 02 90 97


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Ingenjör inom produktionsutveckling till Saab Surveillance

Om företaget Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 19 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare, mer hållbar och mer rättvis värld. Affärsområdet Surveillance är en av världens främsta leverantörer av övervakningslösningar, flygelektronik samt system för att upptäcka, lokalisera och skydda mo... Visa mer
Om företaget
Saab är ett ledande försvars- och säkerhetsföretag med uppdrag att hjälpa nationer att skydda sin befolkning och bidrar till trygghet för människor och samhällen. Med 19 000 talangfulla medarbetare utvecklar Saab teknik och lösningar för en säkrare, mer hållbar och mer rättvis värld.

Affärsområdet Surveillance är en av världens främsta leverantörer av övervakningslösningar, flygelektronik samt system för att upptäcka, lokalisera och skydda mot hot. På Surveillance hittar du en kreativ arbetsmiljö som kännetecknas av engagemang, professionalism och arbetsglädje. För Saab är det självklart med balans mellan arbete, fritid och familjeliv. Tillsammans med dina kollegor får du möjlighet att utvecklas inom vårt teknikområde samtidigt som du utvecklas inom nya inriktningar och på så sätt fördjupar dina kunskaper.

I den tillväxtfas vi är i och med många kompetenta kollegor finns stor utvecklingspotential för både dig och teamet. Det är därför viktigt att vi fortsätter stötta och lyfta varandra. Vi har god sammanhållning och gillar att ha roligt på jobbet!

Dina arbetsuppgifter
I rollen som produktionsutvecklingsingenjör ingår du i vår utvecklingsavdelning och arbetar med att industrialisera nya komponenter i vår produktion. Arbetet utförs i projektform och innefattar förberedelse och utredningar såsom nödvändiga inköp av maskiner och verktyg, anpassningar av befintliga produktionslinor samt utformning av nya flöden etc.

Dina huvudsakliga arbetsuppgifter inkluderar:
• Utveckling av produktionsupplägg
• Ta ansvar för tillverkningsplaner
• Design för montering
• Ledtidsberäkningar
• Värdeströmskartläggning & FMEA
• Produktionsflöde & layoutplanering
• Utveckling av produktionsmetoder och processer
• Ta ansvar för investeringar och affärscase
• Delta i eller leda implementering av nya digitala lösningar


Din profil
Du är en person med ett öppet sinne, ett genuint teknikintresse och ett strukturerat arbetssätt. Du har goda kunskaper och intresse för att lära dig tillverkningsprocesser och flöden för produkter med relativt små serier. Vi behöver att du tar ett övergripande tekniskt ansvar inom vår industrialiseringsprocess när nya produkter introduceras i vår produktion och vid behov skapar nya produktionslinjer.

För att trivas i denna roll bör du vara en person med eget driv och vilja att lyckas, men du behöver även kunna fungera väl i team. Du förväntas ha högt utvecklad kommunikationsförmåga, flexibilitet och vilja att samarbeta.

Kompetenskrav:
• Master- eller kandidatexamen inom områden som produktion, tillverkning, logistik och industriteknik
• Goda kommunikationsfärdigheter
• Kompetens inom mjukvara som Microsoft Office 365
• Allmänt intresse av tekniska produkter och lösningar
• Du behärskar svenska och engelska obehindrat

Önskad kompetens:
• Kunskaper i FMEA och simuleringsverktyg som DES
• Erfarenhet av CAD-programvara
• Erfarenhet av att arbeta i ERP/PLM-system
• Öppen för att lära dig nya programvaror och verktyg
• Standarder som IPC-A-610, 620, 640
• Logistik


Befattningen kräver att du genomgår och godkänns enligt vid var tid gällande bestämmelser för säkerhetsskydd. För befattningar där Saab har krav på säkerhetsklassinplacering kan, i förekommande fall, medföra krav på visst medborgarskap.

Ansökningsförfarande
I den här rekryteringen samarbetar Saab med Skill. Tjänsten är ett konsultuppdrag där du initialt blir anställd av Skill med goda möjligheter till fortsatt anställning på Saab.

Urval sker löpande och tjänsten kan komma att tillsättas före sista ansökningsdatum, vänta därför inte med att söka. Om du har frågor angående tjänsten eller rekryteringsprocessen är du välkommen att kontakta Johan Zizala via mail [email protected].

Om oss
Skill är ett modernt kompetensföretag med ett brett tjänsteutbud inom rekrytering, bemanning, hr-tjänster och kompetensutveckling. Vi har en stark kundbas i teknik- och industriföretag samt inom IT och tech.
Rätt människor, på rätt plats, kan förändra allt – och när människor växer, växer företag. People change – everything. Visa mindre

Erfaren beräkningsingenjör struktur

Semcon Simulation växer och vi söker nu efter nya kollegor som är vassa på tekniska beräkningar och numerisk simulering inom strukturanalys. Din roll Som beräkningsingenjör hos oss kommer du stötta produktutvecklingsprojekt med din expertis, inom strukturanalys, och vara delaktig i utvecklingsprocessen för att tillse att krav och specifikationer uppfylls. Uppdragen är av varierande storlek och utförs antingen in-house på Semcon eller ute hos någon av vår... Visa mer
Semcon Simulation växer och vi söker nu efter nya kollegor som är vassa på tekniska beräkningar och numerisk simulering inom strukturanalys.

Din roll

Som beräkningsingenjör hos oss kommer du stötta produktutvecklingsprojekt med din expertis, inom strukturanalys, och vara delaktig i utvecklingsprocessen för att tillse att krav och specifikationer uppfylls. Uppdragen är av varierande storlek och utförs antingen in-house på Semcon eller ute hos någon av våra kunder.

Du har en relevant högskoleutbildning på minst mastersnivå och några års erfarenhet av att jobba med tekniska beräkningar i ett konsult- eller produktbolag.

Som team gillar vi att lösa problem tillsammans när vi ställs inför svåra utmaningar. Du bidrar till laget genom stort eget ansvar. Vi är långsiktiga i våra relationer samt flexibla i vårt tankesätt för att skapa värde till våra kunder. Vi kommunicerar mestadels på svenska men även på engelska varför du behärskar dessa språk obehindrat. CAE-verktygen vi använder mest i vårt dagliga arbete är:

- Ansa/Meta

- Ansys Mechanical

- Abaqus

Du har därför erfarenhet från ett eller flera av dessa verktyg.

Om oss

På Semcons avdelning Simulation & Digital Twins är vi flera team som arbetar tillsammans för att hjälpa våra kunder att ta sina produkter till nästa nivå; genom kravhantering, tekniska beräkningar och simuleringar. Vi har en stor in-houseverksamhet och nära samarbete med andra avdelningar på Semcon. Bland våra kunder finns välkända bolag inom branscher såsom industri, fordon, medicinteknik, green technology och energi.

Att jobba hos oss är mer än bara ett jobb. Hos oss får du kollegor som bidrar med olika erfarenheter, kunskap och perspektiv. Vi kanske inte alltid tycker likadant men vi värderar samma saker: balans i livet, att ha kul tillsammans, få saker och ting gjorda och att tillsammans utvecklas både professionellt och personligt.

Varmt välkommen med din ansökan!

Om du har frågor om positionen, vänligen kontakta Team Manager
Albin Lindmark: 0739-66 74 58

Till bemannings-, förmedlings- och rekryteringsföretag och till dig som är försäljare:
Vi undanber vänligen men bestämt direktkontakt med bemannings-, förmedlings- och rekryteringsföretag samt andra externa aktörer och försäljare av ytterligare jobbannonser. Visa mindre

Simulation Engineer

Are you looking for a creative and stimulating job with enthusiastic and really skilled colleagues? Would you like to be a key player within transmission analysis? In addition, you will have the possibility to develop the future sustainable transport solutions together with us. We stand in front of challenging demands – where reducing the CO2 emissions is one of the biggest – and are now creating new products, conventional powertrains as well as electrifie... Visa mer
Are you looking for a creative and stimulating job with enthusiastic and really skilled colleagues? Would you like to be a key player within transmission analysis? In addition, you will have the possibility to develop the future sustainable transport solutions together with us. We stand in front of challenging demands – where reducing the CO2 emissions is one of the biggest – and are now creating new products, conventional powertrains as well as electrified.


If you want to be a part of this, please join us at Volvo Group!


This is us, your new colleagues


Transmission Simulation and System Design is a group with 19 engineers, within the Driveline department, Group Trucks Technology. The Swedish organization has worldwide product platform responsibility for Heavy-Duty Powertrains, electric and conventional, and of the installation in European Volvo products. We participate in all stages of the product cycle – from advanced engineering to industrial development and maintenance.


Our group is responsible for transmission analyses within many different areas: FEA, 1D flow, 1D mechanical, CFD, as well as system layout and gear design. Within the FEA area we perform simulations to optimize durability, weight, and noise/vibration to support our HW design teams and in order to bring our customers world-class products.
At driveline you will be working at a department that in addition to hardware design also includes verification and workshop, NVH testing including noise chamber, and software design. We work together with both the vehicle assembly plants as well as our own gearbox factories. It gives a unique opportunity to work with all aspects of the world renowned I-shift gearbox and to be part of shaping our future.


Role description


As a Simulation Engineer, you will perform strength and durability simulations of our driveline systems and components. You will be involved in the design and analysis of new concepts and technologies. You will support project leaders and design engineers in all project phases with technical solutions.


You will contribute with method and tool development in your field. It is also important for you to be in close contact with our physical verification team to correlate models.


Who are you?


To be successful in your new role we believe you have the following skills/experience:
Master of Science or higher in Mechanical Engineering with focus on Applied Mechanics or equivalent
Work experience within strength and durability, preferably in the tools Abaqus, ANSA, DesignLife, Matlab and Python
Programming competence is a strong merit
Structured and analytical, with good communication skills
Fluent in English, written and spoken

We think that you have a genuine technical interest, especially in mechanical systems. You need to be able to work both independently and in cross functional teams. You need to have the ability to explain your results and conclusions in a structured and pedagogical way to your colleagues and stakeholders.


For further information please contact
Maria Petersson, Group Manager Transmission Simulation and System Design, Tel. +46 31 322 58 18


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

System Engineer within Motor Drive System

The use of transport and the solutions given on our globe is rapidly changing and new technologies are established and used to create more sustainable solutions. Electromobility is certainly one of the keys to achieving a more sustainable mobility looking ahead. We now invite you to join us in creating a brighter future for generations to come. Not only will you be working with the coolest technical challenges creating the future. You will also be part of ... Visa mer
The use of transport and the solutions given on our globe is rapidly changing and new technologies are established and used to create more sustainable solutions. Electromobility is certainly one of the keys to achieving a more sustainable mobility looking ahead. We now invite you to join us in creating a brighter future for generations to come. Not only will you be working with the coolest technical challenges creating the future. You will also be part of an optimistic atmosphere, where joy, knowledge sharing, and openness are key characteristics. We are passionate about deploying new ways of working and focusing on continuous improvements to stay in the forefront.
Apply here today!


What do we do?


We work both with current and future technical challenges and play a major part in developing the electrical drivetrains for our vehicles. We focus on system simulations, model development, data treatment and advanced engineering and are also responsible for functional safety, SFMEA and system certification. With us you will have a diverse, friendly, and open-minded team on your side, always providing support to each other to succeed in team deliveries.


What will you do?


You will be our new System Design Engineer to join the Motor Drive System team. In this role you will support the team with deliveries that consider the entire lifecycle of development with participation and/or leading concepts in early phases of the development cycle. Together with your teammates you will steer explorations of alternatives to establish a system level solution and secure competitive system solutions for the application needs. You will also contribute to the development of technical roadmaps and system architecture roadmaps. We are closely connected to other teams at Volvo, such as simulation, data analytics, software and hardware development and system verification.


Who are you?


This position requires an open-minded team player, keen to learn and develop yourself in a technical and personal manner. You are great at adapting to new situations, flexible and good at prioritizing.


As our team is somewhat a “spider in the web” you need to be comfortable with hosting meetings and talking in front of people.


Requirements:
Master's degree within Electrical Engineering - electrical drive system/ power electronics/ electrical machine design.
Experience within automotive applications.
Knowledge of Electric Motor Drive system.
Good communication skills in English, both spoken and written.

It is considered a merit if you have experience within one or several of the following;
Automotive, MATLAB/Simulink, Python, power electronics, requirement management, software configuration and development, Volvo systems, Agile principles, and methods, HIL rigs and testing, functional safety.

What can we offer?


With us, you get an opportunity to work together with highly skilled colleagues in an exciting and developing global environment with colleagues from around the globe. We trust the individual and act as a team, stay close to our product and values, and provide opportunities for professional and personal growth.


Come, join us as we take our solutions into a new era and make modern life possible. Let's drive progress together.


Curious and want to know more? Please get in touch! We look forward to receiving your application!


Recruiter name: Dania Khairallah
E-mail address: [email protected]


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Chief Engineer, Sustainable Power Systems

Chief Engineer, Sustainable Power Systems We are now looking for a Chief Engineer within Sustainable Power Systems. Volvo Penta is a world class supplier of engines and complete drive systems for marine and industrial applications, with the strong vision to be the leader in sustainable power solutions. Within the organization Sustainable Power Systems, we develop combustion engines and Fuel Cell technology. We are committed to succeed in our transforma... Visa mer
Chief Engineer, Sustainable Power Systems


We are now looking for a Chief Engineer within Sustainable Power Systems.
Volvo Penta is a world class supplier of engines and complete drive systems for marine and industrial applications, with the strong vision to be the leader in sustainable power solutions.


Within the organization Sustainable Power Systems, we develop combustion engines and Fuel Cell technology. We are committed to succeed in our transformation towards sustainable power solutions and are focusing on alternative fuels as well as developing our technology towards future emission legislations.


Our employees describe Volvo Penta as a great place to work, built upon respect and commitment. We encourage people to take individual responsibility and offer exciting assignments in a highly innovative environment. We strongly believe that high performance comes from having fun at work, and the courage to think outside the box.


This Chief Engineer position is a new role to our organization and a part of our ambition to enhance our product ownership. The Chief Engineer is part of the Sustainable Power Systems management team and manages cross platform requirement and roadmap alignment on a systems and component level. The Chief Engineer also supports the product ownership within the line function with facilitation and coordination. You will be part of shaping both the role and our way of working.


Key Responsibilities
Manage high level technical requirement break down and definition.
Facilitate and coordinate product road maps for components and systems.
Secure an adequate structure of requirements within Systems Engineering.
Set targets for shared technology, standard parts and backwards compatibility.
Plan and initiate necessary product changes in collaboration with product planning and range management.
Develop our methodology for product ownership in alignment with line managers and other functions.
Engaged participation in the management team of Sustainable Power Systems.

Who are you?


We believe that you have a passion for the combustion engine and deep knowledge on a technology level. You are skilled in communication and have a strategic mindset. You are ready to embark on a continuous improvement journey with passion and patients.


Curious and have some questions? Please contact: [email protected] +46(0)739- 028864


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre

Mechanical Development Engineer to Yara Marine!

Do you want to be part of a journey to promote a healthy planet for future generations? Yara Marine is now looking for a Mechanical Development Engineer who will join their engineering team. You will be a major key player for the future development of green technology solutions. We look forward to seeing your application! OM TJÄNSTEN Since 2010, Yara Marine Technologies has been at the forefront of maritime emissions reduction, working closely with ship... Visa mer
Do you want to be part of a journey to promote a healthy planet for future generations? Yara Marine is now looking for a Mechanical Development Engineer who will join their engineering team. You will be a major key player for the future development of green technology solutions. We look forward to seeing your application!

OM TJÄNSTEN
Since 2010, Yara Marine Technologies has been at the forefront of maritime emissions reduction, working closely with ship-owners, yards, and naval architects as partners in our effort to drive the change towards sustainable shipping. Today, Yara Marine offers a portfolio of green technologies, such as SOx scrubbers, fuel optimization systems, turnkey shore power solutions, and the cutting-edge, advanced wind-assisted propulsion system WindWings. Yara Marine is headquartered in Oslo, Norway, with offices in Sweden, Poland, and China.

Yara Marine offers you:


* The possibility to be part of a market leading innovative global company in the forefront of green technology for the marine industry
* An open and inspiring environment where your energy will make a difference
* Personal and professional development
* A friendly culture that puts a high value on the social work environment


ARBETSUPPGIFTER
As a mechanical development lead you will be part of the engineering team consisting of 8 colleagues. In the position, you will participate and lead customer projects according to internal and external specifications. You will also play an important role in leading Mechanical R&D projects to develop and improve products within the company portfolio. The position consists of the following:

Main responsibilities:


* Create technical specifications and contribute with design requirements to ensure adequate documentation for evaluation and backwards traceability
* Prepare project-specific mechanical drawings such as concept sketches, layouts and production drawings
* Develop and improve products within the company portfolio in cooperation with R&D Department
* Support and test components and prototypes according to project needs
* Evaluate project specifications and design
* Work closely with component suppliers for new designs
* Lead the product development and ensure that it is in line with the company's strategy


VI SÖKER DIG SOM
To thrive in this position, you are solution-oriented and proactive with a positive mindset toward challenges and development. You enjoy working both in teams as well as independently, and appreciate communicating and socializing with others. Furthermore, you have an eye for details and can identify the project and product needs based on your experience from detail engineering.

Requirements:


* Bachelor’s degree within relevant field (BSc. or MSc. in Engineering)
* Experience within the mechanical engineering field, including steel constructions and machine elements
* Experience from work out in the field, such as inspections at manufacturers and installations at site
* Experience in designing according to relevant standards, such as pressure vessel directive, ship classification rules and Eurocode
* Experience from using Autodesk Inventor, Auto Cad 2D/3D and Vault or equivalent CAD software
* Fluent in English, verbal and written


Meritorious:


* Experience from process, maritime industry or similar background is of interest
* Experiance from working as a team leader or project leader


Other information:


* Start: To be agreed
* Contract: Full-time
* Location: Gothenburg


This recruitment process is handled by Academic Work and Yara Marine´s wishes that all calls and emails regarding the position go through Academic Work. Apply for the position by clicking ”Apply here” below. We go through the selection on an ongoing basis and if we have moved on to the selection and interview phase the advertisement can be taken down before the position is filled.

INFORMATION OM FÖRETAGET Visa mindre

Senior Validation Engineer

Senior Validation Engineer Gapwaves AB As we continue to grow and attract new customers we are now hiring several new co-workers. We are constantly looking to expand our development team, both at junior and senior level. Whether you are a senior Validation Engineer or an ambitious recent graduate in the field, we offer a highly stimulating environment for you to take lead in research and development or grow professionally. Apply today! About the Job Are ... Visa mer
Senior Validation Engineer
Gapwaves AB
As we continue to grow and attract new customers we are now hiring several new co-workers. We are constantly looking to expand our development team, both at junior and senior level. Whether you are a senior Validation Engineer or an ambitious recent graduate in the field, we offer a highly stimulating environment for you to take lead in research and development or grow professionally. Apply today!

About the Job
Are you a specialist in validation and excited to work with verification of newly developed products and processes?
Apply for this position and engage in our journey from start-up to mass volume producer of antennas for the next generation of autonomous devices.
Job Description:
As part of the RnD department, you will have a key role in Gapwaves mission of leveraging innovative technologies to deliver advanced antenna solutions.
As a senior validation engineer you will lead the work to develop validation strategies both at the suppliers and in our in-house laboratory facility. This includes, but is not limited to, mechanical validation of complex geometries with tight tolerances and environmental qualification of antennas.
You will be a part of a skilled and driven team of mechanical engineers, but you work will be an important collaboration within our RnD, supply, and quality departments.
At Gapwaves you will experience an open atmosphere where we encourage our employees to trust in each other, put the team first and take initiatives.
Responsibilities :
Mechanical measurements and verification of parts and assembled antennas against specification
Maintaining in-house laboratory mechanical measurement equipment
Developing best practice measurement and analysis methods to be used in research, development projects, and running in-house production
Coordination of planned and on-going validation activities, including environmental and cleanliness testing
Working with suppliers to verify their validation strategies and reports for our parts
Quality assurance of products


Required Qualifications:
University degree in mechanical engineering, materials engineering or similar.
Experience with high precision mechanical measurements in a high volume setting
Experience working with validation strategies in-house and with suppliers
Experience with statistical quality control in validation
Proficiency in English
Exceptional interest and drive in leading development and technical excellence.



Meriting Qualifications:
Experience with mechanical specification drawings
Experience maintaining laboratory equipment
Experience working with high volume products
Experience from manufacturing process like injection moulding, metallisation, die-casting, stamping, etching
Experience with large data management
Experience with optical 3D scanning, point-scanning metrology, cross-cut analysis, X-ray, CT. cleanliness validation, environmental stress-testing
Six sigma or similar statistical tools



Skills:
As an engineer and employee of Gapwaves you should be strong in driving your own tasks forward, even in uncertain situations, and you should be comfortable with taking decision. You shall be prestigeless team a player that generates energy, motivates your peers and easily takes help from co-workers. As we are a young growing company it is also to be expected that you are good in handling a dynamic environment.
We continuously recruit so we encourage you to send in your application as soon as possible.
Contact Hanna Skårbratt / Head of Mechanical Engineering if you have questions: [email protected]

About Gapwaves:
Gapwaves originates from research conducted at Chalmers University of Technology and was founded in 2011. Gapwaves vision is to be the most innovative provider of mm-wave antenna systems and the preferred partner to those pioneering next generation wireless technology. By leveraging the disruptive Gapwaves technology we help pioneers in telecom, automotive and satcom to create highly efficient mm-wave antenna systems that contributes to re-defining everyday life. Today Gapwaves’ customers include some of the world’s most innovative and successful tech and automotive companies, spread around the globe. Visa mindre

Senior Technical lead

Experience Minimum 8+ years in automotive domain Battery Modelling using MathWorks Simscape Physics based modelling e.g. Functional Mock-up Units (FMUs) Model parameterization using dSPACE ASM HIL Test Setup experts mainly dSPACE Skills Expert level preferred - Model Based System Engineering (MBSE), Matlab Simulink, MathWorks Simscape Domain Expertise Chassis Motion controls, Kinetic suspension Visa mer
Experience
Minimum 8+ years in automotive domain
Battery Modelling using MathWorks Simscape
Physics based modelling e.g. Functional Mock-up Units (FMUs)
Model parameterization using dSPACE ASM
HIL Test Setup experts mainly dSPACE

Skills
Expert level preferred - Model Based System Engineering (MBSE), Matlab Simulink, MathWorks Simscape

Domain Expertise
Chassis Motion controls, Kinetic suspension Visa mindre

Mechanical Validation Engineer

As we continue to grow and attract new customers we are now hiring several new co-workers. We are constantly looking to expand our development team, both at junior and senior level. Whether you are a senior Validation Engineer or an ambitious recent graduate in the field, we offer a highly stimulating environment for you to take lead in research and development or grow professionally. Apply today! About the Job Are you interested in mechanical validation... Visa mer
As we continue to grow and attract new customers we are now hiring several new co-workers. We are constantly looking to expand our development team, both at junior and senior level. Whether you are a senior Validation Engineer or an ambitious recent graduate in the field, we offer a highly stimulating environment for you to take lead in research and development or grow professionally. Apply today!

About the Job
Are you interested in mechanical validation and excited to work with verification of newly developed products and processes.
Apply for this position and engage in our journey from start-up to mass volume producer of antennas for the next generation of autonomous devices.
Job Description:
As part of the RnD department, you will have a key role in Gapwaves mission of leveraging innovative technologies to deliver advanced antenna solutions.
As a mechanical validation engineer you will work across the different project teams to develop and execute validation plans for mechanical measurements on part level and for the final assembled product. You will work with validation strategies both at the suppliers and in our in-house laboratory facility.
At Gapwaves you will experience an open atmosphere where we encourage our employees to trust in each other, put the team first and take initiatives.
Responsibilities :
Mechanical measurements and verification of parts and assembled antennas against specification
Maintaining in-house laboratory mechanical measurement equipment
Developing best practice measurement and analysis methods to be used in research and development projects
Working with suppliers to verify their validation strategies and reports for our parts
Quality assurance of products



Required Qualifications:
University degree in mechanical engineering, materials engineering or similar.
Experience with high precision mechanical measurements
Experience with statistical quality control in validation
Proficiency in English
Exceptional interest and drive in leading development and technical excellence.



Meriting Qualifications:
Experience with mechanical specification drawings
Experience setting-up and maintaining laboratory equipment
Experience working with high volume products
Experience with point scanning measurements, 3D optical measurements, environmental testing
Six sigma or similar statistical tools

Skills:
As an engineer and employee of Gapwaves you should be strong in driving your own tasks forward, even in uncertain situations, and you should be comfortable with taking decision. You shall be prestigeless team a player that generates energy, motivates your peers and easily takes help from co-workers. As we are a young growing company it is also to be expected that you are good in handling a dynamic environment. We continuously recruit so we encourage you to send in your application as soon as possible.
Contact Hanna Skårbratt / Head of Mechanical Engineering if you have questions: [email protected]

About Gapwaves:
Gapwaves originates from research conducted at Chalmers University of Technology and was founded in 2011. Gapwaves vision is to be the most innovative provider of mm-wave antenna systems and the preferred partner to those pioneering next generation wireless technology. By leveraging the disruptive Gapwaves technology we help pioneers in telecom, automotive and satcom to create highly efficient mm-wave antenna systems that contributes to re-defining everyday life. Today Gapwaves’ customers include some of the world’s most innovative and successful tech and automotive companies, spread around the globe. Visa mindre

Technical Lead

Tata Technologies is now looking for a Lead engineer within the Exteriors domain to strengthen our existing team. As a Lead engineer at Tata Technologies Nordics, you will be a part of our Mechanical engineering department in a team of professional individuals from different parts of the world. We do work both inhouse in project teams of various sizes and onsite at our client's facilities. Your main responsibility is to lead the design and development in... Visa mer
Tata Technologies is now looking for a Lead engineer within the Exteriors domain to strengthen our existing team.
As a Lead engineer at Tata Technologies Nordics, you will be a part of our Mechanical engineering department in a team of professional individuals from different parts of the world. We do work both inhouse in project teams of various sizes and onsite at our client's facilities.
Your main responsibility is to lead the design and development in a cross functional team for the Exterior components or subsystems for which you will be responsible. This is done in cooperation with other teams and stakeholders at the customer site as well as with supplier(s). You will actively drive and lead the development to fulfil given targets in terms of cost, timing, delivery and quality.
Main Responsibilities
Responsible for leading the development and design of one or several components or systems within the Exteriors domain.
Responsible for creating and maintaining the time plan for the respective component or subsystem.
Ensuring progress is made by leading and following up actions with their respective owners.
Communicating team progress?to project management and other stakeholders.
Communicate and agree requirements with the supplier(s).
Lead technical discussions with stakeholders at customer and with supplier(s).
Your background
B.Sc. in Mechanical engineering, Automotive engineering or similar. M.Sc. is meritorious.
Knowledge and experience from the automotive industry.
Background within mechanical design, mechanical integration or similar at OEM or Tier 1 supplier.
Minimum 7 years of experience from working within the automotive industry.
Experience from development of Plastic and metal components and their manufacturing methods.
It is meritorious to have worked within more than one area in the Exterior domain (e.g. Bumpers, undertrays, heat shields, exterior cladding, fenders).
Basic knowledge in Catia V5.
Knowledge of PDM/PLM- and requirement management systems (e.g. TeamCenter, System Weaver, PDM-link or similar).
Proven project management capability demonstrated by recent delivery on time & budget.
Team leader experience.
Strong communication skills. Should be comfortable to present information at different levels.
Familiar with the release process of hardware in the automotive industry.
Experience from working in an Agile environment is a plus.
Fluent spoken/written English, Swedish is a plus.
Personal Profile
Open minded with a “can do” mentality, structured and able to work independently as well as contribute to the team by working cross-functionally.
You should be systematic, thorough but also capable to adapt in a quick moving environment where the prerequisites can change on short notice.
Ability to keep many tasks running in parallel.
Transparent, knowledge sharing and willing to learn new things. Visa mindre

Senior Technical lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world's leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit, Senior Technical lead. Role Understand the nature, scope and viability of proposed task/project and plan his/her work Interact with product/project management to participate in developing the requirements... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world's leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit, Senior Technical lead.
Role
Understand the nature, scope and viability of proposed task/project and plan his/her work
Interact with product/project management to participate in developing the requirements for designing of software modules
Design and Develop software modules for devices supporting automotive protocols.
Qualification in Engineering Electrical ,electronic control systems or related technical field of study
Minimum of 5 years of experience in similar roles
Automotive / Commercial Vehicles Industry experience in development.
Effective communication with stakeholders of varying levels of technical expertise.
Key skills
Requirement Gathering from RFQ Documents.
Requirement Documentation, Analysis and Project Planning.
Autosar and functional safety
Qualification: BE/ME/Btech/Mtech - Electronics, Electrical, MEchanical, Automotive Engineering
Experience: 10 Years Minimum, Visa mindre

Mekanisk Konstruktör , Mechanical Design Engineer (Creo)

Ansök    Mar 4    KONSU AB    Utvecklingsingenjör, maskin
Mekanisk designingenjör för vår kund inom försvarsindustrin. Du kommer att bidra till hela produktutvecklingslivscykeln. Skapa, 3D-modellera och designa produktdistributioner och scheman med hjälp av kundspecifikationer och rekommendationer. Du kommer att testa dina designer och göra justeringar där det behövs. Dessutom kommer du att undersöka avvikelser och lösa problem för framtida designer. Kvalifikationer Kandidatexamen i maskinteknik, mekatronik, el... Visa mer
Mekanisk designingenjör för vår kund inom försvarsindustrin. Du kommer att bidra till hela produktutvecklingslivscykeln. Skapa, 3D-modellera och designa produktdistributioner och scheman med hjälp av kundspecifikationer och rekommendationer. Du kommer att testa dina designer och göra justeringar där det behövs. Dessutom kommer du att undersöka avvikelser och lösa problem för framtida designer.


Kvalifikationer
Kandidatexamen i maskinteknik, mekatronik, elektroteknik eller besläktat område
Verktyg som Creo, Windchill och IFS
Flytande svenska.
Tidigare erfarenhet som mekanisk designingenjör eller liknande roll är en stor fördel.



Vad vi erbjuder
Vi erbjuder en flexibel arbetsplats baserad på förtroende, en hälsobonus, en fantastisk arbetsmiljö fylld med motiverade kollegor, personlig och professionell tillväxt och utveckling, en betydande grad av självständighet kopplad med ansvar.


För att ansöka om jobbet, vänligen skicka ditt CV till [email protected] med ämnesraden som 1147. För mer information, eller om du har några andra frågor, tveka inte att kontakta oss på [email protected]. Visa mindre

Utvecklingsingenjör inom medicinteknik

Metenova AB expanderar och söker nu en Utvecklingsingenjör med intresse för teknik och utvecklingsarbete, som vill bli en del av ett innovativt bolag på en global marknad. Dina arbetsuppgifter kommer att bli varierande och utvecklande där du både får ta ansvar och inflytande i ett team med kompetenta kollegor i en mycket trevlig arbetsmiljö. Din nya roll Som utvecklingsingenjör hos Metenova AB arbetar du med att driva utvecklingsprojekt mot givna tidpl... Visa mer
Metenova AB expanderar och söker nu en Utvecklingsingenjör med intresse för teknik och utvecklingsarbete, som vill bli en del av ett innovativt bolag på en global marknad. Dina arbetsuppgifter kommer att bli varierande och utvecklande där du både får ta ansvar och inflytande i ett team med kompetenta kollegor i en mycket trevlig arbetsmiljö.



Din nya roll

Som utvecklingsingenjör hos Metenova AB arbetar du med att driva utvecklingsprojekt mot givna tidplaner och mål med din tekniska kompetens och nyfikenhet. I detta arbete ingår även att skapa artikelunderlag, ritningsunderlag, säljmaterial och tekniska specifikationer som ligger till grund för inköpsavdelningen och marknadsavdelningen. Du kommer även vara med att verifiera och validera produkter. Rollen innebär även kommunikation med såväl interna som externa kontakter.

I dina huvudsakliga arbetsuppgifter ingår att:

- Driva egna utvecklingsprojekt mot fastlagda mål.

- Ta fram nya tekniska lösningar samt verifiera dess funktioner

- Agera teknisk expert inom området

- Skapa och uppdatera tekniska specifikationer

- Vara teknisk support, vid behov, i kontakten med tillverkare, säljare och kunder.

- Vid behov stödja och genomföra mixningsstudier hos kunder.



Vem är du?

Vi söker dig som har en civilingenjörsutbildning (MSc) alternativt en högskoleingenjörsutbildning med relevant inriktning inom t ex maskin- eller materialteknik eller likvärdig utbildning kompletterad med några års erfarenhet som konstruktör eller utvecklingsingenjör. Du är van vid att driva egna utvecklingsprojekt, gärna som projektledare och att ta fram nya och kreativa tekniska lösningar inom mekanik. Du gillar att kombinera konstruktörsarbetet med att gå ut på labbet och prova, skruva och genomföra simuleringar. Du har goda kunskaper i Solid Works.

Om du har erfarenhet av att jobba med pumpar, hydraulik samt plast och/eller rostfria material så är det meriterande. Har du dessutom erfarenhet av arbete med fluider eller produktion av läkemedel så är det mycket intressant.

Som person är du social och utåtriktad. Gillar att jobba i team och tillsammans hjälpas åt att lösa uppkomna problem. Du är strukturerad och är självgående med eget driv och ansvarstagande på ett noggrant och disciplinerat sätt.

Du talar och skriver svenska och engelska obehindrat.



Din ansökan

I den här rekryteringen samarbetar Metenova AB med Technogarden och urvalsprocessen sker löpande.

Har du frågor om tjänsten är du välkommen att kontakta Per Gottfridsson på 073-517 99 91, [email protected] eller Ulrika Ydse på 076-167 10 51, [email protected].

Sök rollen via länken i denna annons. Visa mindre

Junior Produktingenjör till Flexlink

Vill du vara en del av ett internationellt och världsledande bolag inom automatiserade transportörsystem? Har du en teknisk högskoleutbildning och vill arbeta i en bred roll där du får integrera med både interna och externa parter samtidigt som du nyttjar dina tekniska färdigheter? Då är tjänsten som Junior Produktingenjör på Flexlink något för dig! Vänta inte med din ansökan då vi tillämpar löpande urval. OM TJÄNSTEN: För 40 år sedan förändrade Flexl... Visa mer
Vill du vara en del av ett internationellt och världsledande bolag inom automatiserade transportörsystem? Har du en teknisk högskoleutbildning och vill arbeta i en bred roll där du får integrera med både interna och externa parter samtidigt som du nyttjar dina tekniska färdigheter? Då är tjänsten som Junior Produktingenjör på Flexlink något för dig! Vänta inte med din ansökan då vi tillämpar löpande urval.





OM TJÄNSTEN:
För 40 år sedan förändrade Flexlink hela branschen med sitt sätt att se på industriell produktion. Idag är dem en ledande leverantör av avancerade lösningar till tillverkningsindustrin så som livsmedel, papper, läkemedel, fordon, batteri och elektronik. Flexlink finns i över 60 länder men har sitt huvudkontor i Gamlestaden. Nu söker Friday för Flexlinks räkning en Junior Produktingenjör som ska bli en del av teamet i Göteborg.

I tjänsten som Junior Produktingenjör kommer du ha flera ansvarsområden vilket passar dig som trivs i en bred och kommunikativ roll. Du kommer ansvara för produktunderhåll och se till att all dokumentation finns uppdaterad och tillgänglig i företagets PLM system. Du kommer ha daglig kontakt med konstruktörerna som är drivande gällande produktutvecklingen. I det samarbetet ansvarar du för att ta reda på ytterligare information som kan vara avgörande för produktens utveckling samt administreringen kring det.

Tyngden i rollen ligger inom underhåll av Flexlinks befintliga produkter men du kommer även supportera kunder från säljbolagen världen över när det kommer till tekniska frågor av komplex karaktär. Därmed krävs det att du som person har förmågan att bemöta kunder på ett professionellt sätt och såklart värdesätter ett gott bemötande. Kommunikationen sker framförallt via mejl men även över telefon.

ARBETSUPPGIFTER:
Arbeta tvärfunktionellt med andra avdelningar som inköp, konstruktion och kvalitét för att driva arbetet framåt.
Administrera och dokumentera produktinformation i PLM-systemet.
Arbeta med underhåll av Flexlinks produkter i Solidworks.
Underhåll av CAD-ritningar och andra specifikationer.
Agera teknisk specialist mot Flexlinks säljbolag runtom i världen gällande sortiment, produkter och underhåll.





VI SÖKER DIG SOM:
Har en teknisk kandidat- eller masterexamen inom mekanik eller liknande.
Är kommunikativ, engagerad och anpassningsbar.
Är obehindrad i svenska och engelska i både tal och skrift då språken kommuniceras dagligen.


Det är meriterande om du har erfarenhet från en liknande tjänst sedan tidigare.

Som person är du driven och samarbetsvillig och har en innovativ inställning. Du motiveras av utmaningar där du får chansen att forma och utveckla användandet av PLM. Du uppskattar vidare att integrera med personer, vägleda och ge support och att alltid sträva efter att göra ditt bästa. Stor tyngd kommer att läggas på personlig lämplighet.

OM KUNDFÖRETAGET:
Flexlink is a world-class factory automation expert. Working closely with global customers we provide innovative, automated solutions to produce goods smarter, safer and at lower operating costs. Headquartered in Göteborg, Sweden, FlexLink has operating units in 30 countries and is represented in more than 60. In 2015, FlexLink had 840 employees and a turnover of SEK 1,872 million. Läs gärna mer om Flexlink här.





ÖVRIG INFO:
Omfattning: Heltid, vikariat med möjlighet till förlängning.
Start: Omgående, med hänsyn till uppsägningstid.
Placering: Gamlestaden, Göteborg.
Rekryteringsansvarig: Gabriella Bergström, [email protected].


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen.





OM FRIDAY:
Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter.

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik. Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Mechanical Development Engineer to Yara Marine!

Do you want to be part of a journey to promote a healthy planet for future generations? Yara Marine is now looking for a Mechanical Development Engineer who will join their engineering team. You will be a major key player for the future development of green technology solutions. We look forward to seeing your application! OM TJÄNSTEN Since 2010, Yara Marine Technologies has been at the forefront of maritime emissions reduction, working closely with ship... Visa mer
Do you want to be part of a journey to promote a healthy planet for future generations? Yara Marine is now looking for a Mechanical Development Engineer who will join their engineering team. You will be a major key player for the future development of green technology solutions. We look forward to seeing your application!

OM TJÄNSTEN
Since 2010, Yara Marine Technologies has been at the forefront of maritime emissions reduction, working closely with ship-owners, yards, and naval architects as partners in our effort to drive the change towards sustainable shipping. Today, Yara Marine offers a portfolio of green technologies, such as SOx scrubbers, fuel optimization systems, turnkey shore power solutions, and the cutting-edge, advanced wind-assisted propulsion system WindWings. Yara Marine is headquartered in Oslo, Norway, with offices in Sweden, Poland, and China.

Yara Marine offers you:


* The possibility to be part of a market leading innovative global company in the forefront of green technology for the marine industry
* An open and inspiring environment where your energy will make a difference
* Personal and professional development
* A friendly culture that puts a high value on the social work environment


ARBETSUPPGIFTER
As a mechanical development lead you will be part of the engineering team consisting of 8 colleagues. In the position, you will participate in customer projects according to internal and external specifications as well as lead and coordinate Mechanical R&D projects. The position consists of the following:

#

#

Main responsibilities:


* Create technical specifications and contribute with design requirements to ensure adequate documentation for evaluation and backwards traceability
* Prepare project-specific mechanical drawings such as concept sketches, layouts and production drawings
* Develop and improve products within the company portfolio in cooperation with R&D Department
* Support and test components and prototypes according to project needs
* Evaluate project specifications and design
* Work closely with component suppliers for new designs


VI SÖKER DIG SOM
To thrive in this position, you are solution-oriented and proactive with a positive mindset toward challenges and development. You enjoy working both in teams as well as independently. Furthermore, you have an eye for details, identify the project’s needs, and enjoy communicating and socializing with others.

#

Requirements:


* Bachelor’s degree within relevant field (BSc. or MSc. in Engineering)
* Experience within the mechanical engineering field, including steel constructions and machine elements
* Experience from work out in the field, such as inspections at manufacturers and installations at site
* Experience in designing according to relevant standards, such as pressure vessel directive, ship classification rules and Eurocode
* Experience from using Autodesk Inventor, Auto Cad 2D/3D and Vault or equivalent CAD software
* Fluent in English, verbal and written


Meritorious:


* Experience from process, maritime industry or similar background is of interest


Other information:


* Start: To be agreed
* Contract: Full-time
* Location: Gothenburg


This recruitment process is handled by Academic Work and Yara Marine´s wishes that all calls and emails regarding the position go through Academic Work. Apply for the position by clicking ”Apply here” below. We go through the selection on an ongoing basis and if we have moved on to the selection and interview phase the advertisement can be taken down before the position is filled.

INFORMATION OM FÖRETAGET Visa mindre

Lead Engineer, stolar & säten

Vi söker en Lead Engineer / Teknisk Projektledare inom stolar och säten med ansvar för att planera och leda utvecklingen av tekniskt avancerade projekt med ett hållbarhetsperspektiv för fordonsindustrin. Ansvarsområden innefattar bland annat: - Utveckling och utvärdering av nyutvecklings- och ändringsprojekt inom området stolar och säten. - Identifiera och dokumentera teknisk påverkan samt materialsammansättningen för alla nya och/eller reviderade kom... Visa mer
Vi söker en Lead Engineer / Teknisk Projektledare inom stolar och säten med ansvar för att planera och leda utvecklingen av tekniskt avancerade projekt med ett hållbarhetsperspektiv för fordonsindustrin.



Ansvarsområden innefattar bland annat:

- Utveckling och utvärdering av nyutvecklings- och ändringsprojekt inom området stolar och säten.

- Identifiera och dokumentera teknisk påverkan samt materialsammansättningen för alla nya och/eller reviderade komponenter och enheter.

- Verifiera och säkerställa korrekt tekniska dokumentationen kopplat till samtliga ändringar.

- Skapa och uppdatera DFMEA efter tekniska ändringar och ED/DV/PV-testning.

- Säkra en robust konstruktion enligt DFAM, DFMEA etc och säkra frisläppandet av ritningar/modeller/layouter i PLM-systemet.

- Att delta och leda interna och externa leverantörs-/kundmöten.

- Att leda diversifierade och geografiskt utspridda team.

Krav:

- BSc/MSc i maskinteknik eller motsvarande.

- Minst 5 års relevant arbetslivserfarenhet inom fordonsindustrin med tekniskt djup.

- Erfarenhet från fordonsindustrin hos OEM och/eller systemleverantör.

- Erfaren och motiverad projektledare med förmåga att skapa produktiva team och samarbeten globalt.

- Utmärkt kommunikationsförmåga, i både svenska och engelska.

- Körkort B

Together Tech för hållbar produktutveckling

Genom tekniska lösningar gör vi skillnad och levererar på våra kärnvärden genom en passion för människor, teknik och innovation. I nära samarbete med våra kunder arbetar vi med uppdrag från idé till slutprodukt samt genomför uppdrag på plats. Som konsult hos oss blir du del av ett modernt teknikföretag med fokus på att innovera och utveckla för en bättre värld!

Welcome to our world of consulting!

Har du frågor, kontakta gärna

Jesper Sandstedt (mailto:[email protected]), +46705214809 Visa mindre

Sommarjobb, Göteborg – Teknik, produktutveckling och administration

Hur ser dina planer inför sommaren ut? Volvokoncernen annonserar nu sommarjobb för 2023! När vi tänker på Volvokoncernens varumärke och det vi står för kan vi inte låta bli att känna en känsla av trygghet. Ta till exempel vårt mål att producera 100 % fossilfria fordon. Vi är över 100,000 medarbetare världen över som delar känslan av stolthet och hopp över Volvokoncernens bidrag i samhället. Vill du också bidra till ett tryggare samhälle genom att vara m... Visa mer
Hur ser dina planer inför sommaren ut? Volvokoncernen annonserar nu sommarjobb för 2023!


När vi tänker på Volvokoncernens varumärke och det vi står för kan vi inte låta bli att känna en känsla av trygghet. Ta till exempel vårt mål att producera 100 % fossilfria fordon. Vi är över 100,000 medarbetare världen över som delar känslan av stolthet och hopp över Volvokoncernens bidrag i samhället. Vill du också bidra till ett tryggare samhälle genom att vara med och utveckla hållbara transportlösningar? Vill du få erfarenhet av att jobba i produktion och hjälpa oss bygga våra produkter eller supportera vår verksamhet med allt ifrån administrativa uppgifter till produktutveckling? Oavsett intresse så har vi jobbet för dig sommaren 2023!
Volvokoncernen i Göteborg erbjuder sommarjobb inom områdena Teknik & Produktutveckling,?Administration, Inköp, Logistik, Ekonomi, Marknad och Personal.


Sommarjobben finns på olika Volvobolag och arbetsuppgifterna kan variera, allt ifrån enklare uppdrag till mer kvalificerade arbetsuppgifter. Ett krav i vissa av våra tjänster är att du har en teknisk utbildning, till exempel inom maskinteknik, teknisk design, elektroteknik, mjukvara, programmering och kemiteknik. Sommarjobben kan vara allt ifrån några veckor till längre perioder.


Ange i ditt personliga brev vilka områden och tjänster som du är intresserad av att arbeta med och varför. Det är den informationen som vi använder oss av då vi matchar din ansökan mot våra sommarjobb.


För att söka sommarjobb till Volvokoncernen har vi vissa urvalskriterier, men det är din unika personlighet och det du kan bidra med som är viktigast för oss!


För?att söka sommarjobb hos oss måste du:
Vara student under hela 2023. Det är också viktigt att du anger vad du studerar för tillfället alternativt sökt inför hösten.
Minimiålder för att få sommarjobb inom Volvokoncernen är 16 år vid sommarjobbets början, dock kräver många tjänster att man är 18 år.

Hur du söker:


Du gör din ansökan genom att klicka på?ansök?längst ned i denna annons. Vi vill att du med?din ansökan bifogar personligt brev samt CV. Du väljer själv om du vill skriva på svenska eller engelska. Skriv i din ansökan lite om din utbildning och om du har något specifikt område som intresserar dig mest. Ange även gärna vilka veckor som du är tillgänglig.
För att öka dina chanser till att få ett sommarjobb är det viktigt att du lyfter fram dina kunskaper och att du svarar tydligt på de frågor som anges i ansökan till exempel om du har körkort/truckkort samt behörighet.
Glöm inte att hålla utkik i din mejl och även skräpposten då vår kommunikation sker främst via mejl.
Vi behöver din ansökan senast 27 februari. Men vi tillsätter sommarjobben löpande, så tveka inte att ansöka redan idag!

Har du frågor om sommarjobb eller rekryteringsprocessen, kontakta oss gärna:
Email:[email protected]


Tekniska frågor vid?ev. inloggningsproblem eller uppladdning av dokument, kontakta:
Email:[email protected](skriv på engelska).?


Vi ser fram emot din ansökan!?


Vi ber Er respektera att vi inte tar emot ansökningar via mail pga GDPR. Vänligen använd vår karriärsida.[#video#https://www.youtube.com/watch?v=SuzC6nFXT7o{#400,300#}#/video#] Visa mindre

Development Engineer - Diagnostic Validation

Our employees describe Volvo Penta as a great place to work, built upon respect and commitment. We encourage people to take individual responsibility and offer exciting assignments in a highly innovative environment. We strongly believe that high performance comes from having fun at work and the courage to think outside the box. It is our people that make the difference!? The role We are looking for an experienced diagnostics engineer for our development... Visa mer
Our employees describe Volvo Penta as a great place to work, built upon respect and commitment. We encourage people to take individual responsibility and offer exciting assignments in a highly innovative environment. We strongly believe that high performance comes from having fun at work and the courage to think outside the box. It is our people that make the difference!?


The role
We are looking for an experienced diagnostics engineer for our development projects.


In this role you will:
Together with the teams, be responsible for diagnostic validation strategies.
Be responsible of performing complete system diagnostics validation to meet project requirements and contribute to product robustness and customer uptime.
Contribute to develop diagnostics readout analyzing tools for production follow-up.
Lead processes, Ways of Working, best practices development for efficient cross-functional coordination of OBD related validation activities.
Work closely with our system architects, function developers, engine calibration engineers, field test department, partners and aftermarket method engineers.

This job opportunity is unique with its responsibility, possibility, and privilege to build our diagnostics competence within the Engine Development & Calibration organization.
The position offers excellent opportunities for you to use your own initiative and to carry out continuous improvements to the operation by setting the future way of working for Volvo Penta.


Who are you?


To qualify for this role you should have:
More than 5 years of experience from diagnostics work (test/fault injection, calibration, function development), from vehicle/vessel propulsion, fuel cell or electrical power distribution systems.
Excellent troubleshooting, analyzing and communication skills.
General technical interest and curiosity: Volvo Penta’s product portfolio covers everything from heavy duty on-road, off-road, genset to marine commercial and leisure applications!

Are you recognizing yourself in our description? We would love to meet you! Send in your application and take your next step in your career with us.
For further information, please contact:
Manager Andreas Samson +46 31 322 42 96


Kindly note that due to GDPR, we will not accept applications via mail. Please use our career site. Visa mindre