Lediga jobb som Fordonsingenjör i Göteborg

Se lediga jobb som Fordonsingenjör i Göteborg. Genom att välja en specifik arbetsgivare kan du även välja att se alla jobb i Göteborg som finns hos arbetsgivaren.

Embedded software engineer

Ansök    Feb 11    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Göteborg är platsen att vara på om du vill vara en del av utvecklingen av framtidens autonoma fordon! Brinner du för ADAS och AD? Kom och bli en del av Mpya Sci & Tech!

Mpya Sci & Tech är ett företag byggt av och för ingenjörer. Vi har skapat en arbetsplats där du som Mployee alltid är i fokus. I allt vi gör strävar vi efter att skapa högt engagemang och vara lyhörda för våra Mployees idéer om deras framtida arbete och karriär. Det handlar inte om tomma ord, utan om verkliga handlingar. Genom att bygga en stark gemensam kultur med gynnsamma förutsättningar för dig som anställd och hitta uppdrag där du kan utvecklas och känna passion – samtidigt som du behåller en god balans i livet. Det är så vi arbetar!

Just nu söker vi Embedded software engineers till fordonsindustrin med kunskap inom ADAS och Automated Driving-utveckling.

Krav:


M.Sc. in Physics, Automotive Engineering, Mechatronics, Computer Science, Computer Engineering, or other relevant engineering degree.


Kunskap om ADAS och Automated Driving-utveckling i MATLAB och Simulink.


Programmeringsfärdigheter i C och C++.


Erfarenhet av modellering och simulering.


Flera års erfarenhet av mjukvaruutveckling inom fordonsindustrin och ADAS.

• Flytande svenska i tal och skrift.

Dina personliga egenskaper:

Som Mployee tror vi att du har utmärkta kommunikationsfärdigheter och värdesätter relationer, både med kunder och kollegor. Du är positiv, strukturerad och har god förmåga att hantera din tid. Vi tror också att du kan arbeta självständigt såväl som i team och visa initiativ när det behövs.

Vilka vi är

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv, där vi tillsammans bygger en kultur där du kan, Be excitedly curious, Be inclusive and allowing and Be who you are.

Vi anser att verkliga talanger är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och nytänkande företag på vårt eget sätt. Kom och blomstra tillsammans med oss i Göteborg och Stockholm!

Ansökan

Låter detta som en möjlighet du har väntat på? Ansök redan idag!

Vi arbetar med löpande urval, så tveka inte att skicka in din ansökan via www.mpyascitech.com.
Varmt välkommen med din ansökan! Visa mindre

Calibration Engineer

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engi... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engineer to support our Automotive OEM customers in engine and vehicle level calibration for a diverse range of heavy-duty applications, including vehicles, construction equipment, non-road & marine applications, in the Gothenburg area.
As a consultant company we value your personal skills highly. Being professional is key and you always act upon the best interest of the company as an AVL ambassador towards our customers.
* You will work in the development of complex and focus on the development, calibration and validation of Performance, Emissions or OBD functions
* You will be based mainly onsite at the customer premises, working in their projects

You should have experience from Calibration of heavy-duty engines. We think that you have a BSc or MSc degree in Mechanical/Automotive engineering or equivalent. You are a strong communicator with great networking skills, you are solution focused, eager to learn new skills and driven by self-development.  
* 5 plus years of experience in calibration, development or testing of heavy-duty diesel engines
* Calibration of engine control units (ECU) in development and serial projects at customer setting for Performance, Emissions or OBD
* Understanding new regulations and implementing requirements of a project from concept through serial production 
* Planning, execution and evaluation of stationary and dynamic calibration in engine test benches
* Optimization and testing under various ambient conditions both in facility and in territory 
* Analysis of results, preparation of reports and presentation with recommendations for customer 
* Experience in project planning, co-ordination, and delivery
* Supporting homologation and production start
* Good working knowledge of calibration tools (e.g. ATI VISION, INCA) 
* Knowledge of AVL tools - Cameo, Creta and Concerto
* Very good social and communication skills in English (Swedish is meritorious)
* Working knowledge of Matlab, Simulink or Python 
* Driver’s license B (E and/or C meritorious)
* Willingness to travel Visa mindre

Design Engineer Wiring Harness

Ansök    Jan 31    Integro Consulting AB    Fordonsingenjör
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry. Job description: The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you w... Visa mer
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry.
Job description:
The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you will report to Scrum master and Product Owner.
Experience required:
-Minimum 3 years of experience designing electromechanical components such as harnesses, PCB, busbars, distributions boxes, metallic and plastic fasteners.
-Experience from working within automotive industry/product development systems.
-Experience from packaging work in tight and complex environments using CATIA V5 and/or Creo with harness module/flattening and Teamcenter.
Skills required:
-Skilled in Catia V5 and/or Creo
-Ability to work in agile teams planning the work and estimating own workload.
-Minimum BSc in Electrical or Mechatronical Engineering or equivalent
-Fluent in English both spoken and written
-Excellent communicational skills and ability to work in a global environment
-Teamplayer who easily can collaborate with others.
Additional info:
We schedule interviews on a rolling basis so do not wait until end date. Visa mindre

Component Owner of Electrical Components

Ansök    Jan 31    Integro Consulting AB    Fordonsingenjör
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment. Work Description: Write Technical Regulation according to requirements and lead the testing of the electrical components Follow up the technical development and quality of the component together with the supplier. Provide installation requirements to the team responsible for pac... Visa mer
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment.
Work Description:
Write Technical Regulation according to requirements and lead the testing of the electrical components
Follow up the technical development and quality of the component together with the supplier.
Provide installation requirements to the team responsible for packaging and installation.
Validate documentation relating to the components, according to the system requirements.
Perform the corresponding HW releases according to the project plan and make sure deliveries are on time.
Coordinate overall quality activities for the component and resolve any issues that might appear.
Lead and propose quality and cost improvement actions

Education:
You have a degree in Electronics/Mechatronics or similar
Competences:
At least 3 years’ experience of Product Development preferably in the automotive industry.
Technical experience of Electrical & Electronics Systems
You have experience of coordinating and leading technical project in a global environment
Used to following a process plan within R&D
Skills:
Excellent communicational skills, written and oral
Proactive
Organized and work in a structured way
Open minded and flexible
Creative and a solution finder
Customer focus
You enjoy working in a global environment with people from various countries and cultures.
Driven and good at networking
QDCF
Leadership skills
Customer oriented and with a business mind set Visa mindre

Climate System Engineer - Expert

Ansök    Feb 6    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
We are looking for an Expert Level Climate Systems Engineer to work onsite 100% in Gothenburg with our EV Automotive client.

The position demands a senior level expertise and in highlighted areas with proven background only.

Responsible for leading the development of several components Climate system. That includes requirement settings, engineering solutions, supplier management, problem resolution and quality assurance of parts from start to finish of a platform project.
This role includes a broad scope of working tasks, everything from supplier and project meetings,
vehicle expeditions, defining concepts, analyze AC or HVAC characteristics and discussion of future
solutions. The work process includes the early concept phase to the finished product.

Qualifications
• Mechanical Engineering: And Fluid mechanics; Design, requirement setting, analyze,
manufacture, and maintain mechanical system.
• Electromechanical Design: Combine electrical and mechanical processes and
procedures drawn from electrical and mechanical engineering (e.g., actuators)
• Electromechanical Assemblies: experience designing, manufacturing and hardware
technologies combining electrical and mechanical component and function
• Change management: Leading suppliers through engineering changes and quality
assurance fulfilling internal process. PCR process.
• Quality: FMEA, Design review, ESOW, other documentation,
• Problem Solver (can do attitude)
• Design review tool
• Knowledge in Electro-mechanical systems (actuators)
• Knowledge of relevant safety requirements and legislation
• Knowledge of refrigerant system principles and Joule system. Heat exchanger and/or
compressor knowledge is preferable.
• Minimum 5 years’ experience of managing suppliers of refrigerant and other climate
parts.
• Minimum 5 years working experience of automotive industry.
• Experience of working from supplier selection until PPAP2 and launch phase of at
least 1 automotive project

Terms
As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Production Tool Designer

Ansök    Jan 31    Integro Consulting AB    Fordonsingenjör
We are looking for a Senior Production Tool Designer with minimum 5 years of work experience within the automotive industry. You will work in a small team in Integro responsible for the design of lifting equipment and fixtures for production for heavy duty vehicles. Experience & Skills required: -Various years of experience of Tooling CAD Design using Catia V5 is a must. 3DX skills is a plus. -Apart from Catia v5, skilled in Windchill PDM, and Inventor. -E... Visa mer
We are looking for a Senior Production Tool Designer with minimum 5 years of work experience within the automotive industry.
You will work in a small team in Integro responsible for the design of lifting equipment and fixtures for production for heavy duty vehicles.
Experience & Skills required:
-Various years of experience of Tooling CAD Design using Catia V5 is a must. 3DX skills is a plus.
-Apart from Catia v5, skilled in Windchill PDM, and Inventor.
-Experience in Product Development systems.
-Experience with CE documentation.
-Fluent English in writing and speaking is necessary.
-Structured Engineer who is used to work in a Production environment
-Flexible and used to have several task going at the same time.
-Good team player and collaboration skills
-Some travelling to Umeå is required, but the work can partly be done remotely
Start as soon as possible. Visa mindre

Geometrical Architect

Ansök    Jan 31    Integro Consulting AB    Fordonsingenjör
We are looking for a Geometrical Architect for our client in the automotive industry. Job description In this role you will support the team by leading packaging studies from early investigations to end of projects. This means cross functional work with various departments You will be leading the packaging studies & responsible for DMU:s and support the engineers to find solutions. Define how to use the drawing as the basis for verifying the products geome... Visa mer
We are looking for a Geometrical Architect for our client in the automotive industry.
Job description
In this role you will support the team by leading packaging studies from early investigations to end of projects. This means cross functional work with various departments
You will be leading the packaging studies & responsible for DMU:s and support the engineers to find solutions.
Define how to use the drawing as the basis for verifying the products geometrical properties. Produce technical drawings that are sufficient to define a product
Skills & Experience required:
Skilled in Creo or Catia V5 and PDM-link.
Excellent communicational skills and a positive attitude
Great at networking and building relationships at all levels
A structured and organized way of working.
Driven and self-motivated
Degree in Engineering
Some years of experience from working in the automotive industry.
Personal Skills:
Excellent communicational skills and ability to work in a global environment with various cultures and languages. Flexible and can easily adapt.
Fluent in English in both written and spoken
Additional info:
We schedule interviews on a rolling basis so do not wait until end date. Visa mindre

Diagnostic Engineer

Ansök    Jan 31    Integro Consulting AB    Fordonsingenjör
We are looking for a Diagnostic Engineer for our client within the automotive industry. You will be working on the client's site in agile teams. Job Description: · Develop diagnostic method information for aftermarket · Create and maintain diagnostic specifications. · Develop test and calibration operations on vehicle and component level. · Support the development of new or changed functionality in various diagnostic tools · Be a part of developing new dat... Visa mer
We are looking for a Diagnostic Engineer for our client within the automotive industry. You will be working on the client's site in agile teams.
Job Description:
· Develop diagnostic method information for aftermarket
· Create and maintain diagnostic specifications.
· Develop test and calibration operations on vehicle and component level.
· Support the development of new or changed functionality in various diagnostic tools
· Be a part of developing new data structure for future diagnostics content information.
· Implement test and calibration operations based on specifications.
· Analyze test result and manage corrections of issues.
· Review and approve all new and modified specifications.
· Perform unit test of the implemented method/operation and bugs
· Secure verification of the implemented method/operation.
· Ensure that the methods/operations fulfil good design practice
Experience Required:
· Minimum Bachelor’s degree in Mechatronics, Electrical Engineering, Computer Science or similar
· Preferably 3 years of work experience within diagnostics
· Experience from the automotive industry plus if you have worked in Aftermarket
· Experience of Agile way of working-SAFe
· Used to working in an international environment
· A plus if you have experience in machine learning
Skills Required:
· Good to have a software developer/Testing background
· Know CANoe/CANalyzer, and Python
· Driven, helpful and have a “can-dilled o attitude”
· Excellent communication and presentation skills
· Fluent in English both spoken and written
· Good at relationship building/networking
· A team player
· A plus if you have practical workshop /mechanic skills Visa mindre

Lead Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Lead Engineer for Tyres to strengthen our team in Gothenburg. The role You will work with the Tyres, Wheels, and Mobility Team, a diverse group collaborating to create top solutions. Responsibilities Lead technical development of ty... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Lead Engineer for Tyres to strengthen our team in Gothenburg.
The role
You will work with the Tyres, Wheels, and Mobility Team, a diverse group collaborating to create top solutions.
Responsibilities
Lead technical development of tyres for various vehicle models.
Collaborate with for example Procurement, Manufacturing, Accessories, Vehicle Dynamics, NVH, Vehicle Energy Efficiency, and supplies.
Build and maintain a network of expertise across the company.

Requirements
Experience in automotive product development.
Tyres development experience is a plus.
Familiarity with Catia, Teamcenter, KDP, TCPLM
Excellent collaboration skills.
MSc or BSc in Mechanical Engineering or a related field.
Proficient in English, spoken and written
Valid driver’s license B.

If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Group Design Leader, HV Battery Electrical Components at Volvo Cars

Ansök    Jan 30    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

At the engineering department of P&E (Propulsion & Energy) we are responsible for design and delivery of the technical solution of electrified vehicles. The organization is divided into several areas that covers the complete product development, mechanical, electrical and software. 
The department, Battery Hardware, is responsible for designing HW components for the Traction Battery System. You will be part of an engineering team that develop engineering solutions that fulfil attribute requirements and manufacturing process demands within decided cost and time frames. The work includes contacts with other engineering departments, CAE teams and manufacturing engineering within our company as well as with external suppliers. 
The work consists of Design Lead work of HW battery electrical components such as Sheet metal and HPDC (High Pressure Die Casting) parts.  


What you'll do

Group Design Leader. As GDL you are responsible for Time, Technique and Cost within your specific area. Contact with GDL’s, CAE, other R&D members, and manufacturing to agree of required progress. Ensure that the technical documentation (3D Model, TCE, 3DPMI) is available at the right level and at the right time. Ensure that cost is within target and have a close contact with Procurement and supplier. Participate in project meetings and report status to Department Program Manager (DPM).

What you'll bring

Experience as a Group Design Leader for Battery Electrical HW for at least 6 years. Skilled in Volvo Cars processes and tool such as Team Centre Engineering (TCe), Planisware, PCT, VIRA, TC-PLM and KDP. Fluent in English (written and spoken). Technical education at university level or equivalent experience. 

You are structured way of working, and good documentation skills. Positive attitude. Self-driven, result oriented and flexible. Visa mindre

Lead Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Lead Engineer to join our team in Gothenburg, Sweden. Responsibilities Design Development of Suspension System Tuneable Components- Air Spring, Coil Springs, Damper, Spring Aid, ARB Set specification, ver... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Lead Engineer to join our team in Gothenburg, Sweden.
Responsibilities
Design Development of Suspension System Tuneable Components- Air Spring, Coil Springs, Damper, Spring Aid, ARB
Set specification, verification requirements and integration of components to meet the performance, quality, cost and project timeline targets for components and suspension system.
Define DPR/TR and conduct design reviews. Define component test plans and review test results. Sign off PV and DV test plan.
Close coordination with CFT - System Architect and Attribute team finalise specifications and requirements.
Drive suppliers to meet the performance, quality, cost and project timeline targets requirement and document as per NPD in automotive industry
Coordinate with Suppliers, CAE, Testing Teams for detail verification and validation of requirements
Work in close collaboration with Cross functional team
Secure all deliverables and documentation as per NPD stages
Attend and support agile ceremonies

Knowledge / Experience
Bachelor Mechanical Engineering or equivalent
8-12 years' work experience with Suspension System and components like Air Spring, Coil Spring, Damper, Spring Aid, ARB
Experience NPD from concept phase development and industrialization phase development in automotive industry
Knowledge of product development stages, Technical Logical Delivery Plan
Documentation for component and system (DFMEA, Design reviews, DPR & ESOW, DV PV Plan etc)
Project management – Milestone deliveries, Cost Management for components in ownership, PPAP
Knowledge of Passenger Vehicle Suspension;
System sizing for performance, Durability and Endurance requirement for suspension components, Vehicle Dynamics Tuning parameters and Tuning Process, Material Science, Design for Manufacturing, Assembly and service, Failure Analysis and Resolution Techniques.
BOM Management EBOM and Material BOM with Team Center/KDP experience
Competence in technical specifications e.g. 2D/3D drawings, GDnT, and attribute sign off. documentation
Knowledge of Vehicle Dynamics and NVH performance validation and issue resolution is meritorious
Software Knowledge; Teamcenter/KDP, Visview, VIRA, Catia.

If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Product Quality Assurance Manager

Ansök    Jan 23    Eccoci AB    Fordonsingenjör
Description We invite applications for the role of Product Quality Assurance Manager, an exciting opportunity to lead and elevate product quality standards. As part of the team, you will ensure that products meet both company and customer expectations, and drive initiatives for continuous improvement in quality management systems. Key Responsibilities • Process Definition – documentation of process flow diagrams including process steps description, guidel... Visa mer
Description
We invite applications for the role of Product Quality Assurance Manager, an exciting opportunity to lead and elevate product quality standards. As part of the team, you will ensure that products meet both company and customer expectations, and drive initiatives for continuous improvement in quality management systems.
Key Responsibilities
• Process Definition – documentation of process flow diagrams including process steps description, guidelines, templates & checklists.
Candidate Requirements:• 8 – 10 years of work experience in Automotive domain specifically quality, processes and standards areas.• Experience in Quality Management practices supporting Automotive embedded mechatronics system projects and in multi-disciplinary projects.• Experience in preparing process documentation.• Analytical skills to diagnose & resolve process issues.• Experience in Quality process improvement and implementation.• Experience auditing quality management system.• Independently interface with various stake holders.• Exposure to Product development with System approach. Visa mindre

CAD/Design Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit CAD/Design Engineers to join our team in Gothenburg, Sweden. The role At Propulsion and Energy, you will be a key contributor in the development of the next generation outstanding luxury cars. Together with ... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit CAD/Design Engineers to join our team in Gothenburg, Sweden.
The role
At Propulsion and Energy, you will be a key contributor in the development of the next generation outstanding luxury cars. Together with other engineers around the world, you and your team will create innovative human-centric car technology that makes life less complicated and more enjoyable for people. The team Hybrid HW&SW; within the department Thermal Management Hybrid is responsible for attributes, functions and systems connected Engine, Transmission, Fuel and Cooling systems installed in vehicle. The team consists of 22 persons working as Product Owners, Component responsible, Design/CAD Engineers and Change Management specialists.
Responsibilities
• As a Design/CAD Engineer you will work and have responsibility for design, packaging and release of 2D/3D documentation of different components in the systems.
• You will work with issues related to today’s production and new projects covering quality, cost and technology.
• You will work close to the Component Responsible and Product Owner in the team.
• Design Engineering & Packaging work.
• Administrate documentation of 2D drawings and 3D models.
• Contact with interfaces.
• Contact with suppliers.
Required qualifications
• B.Sc. university degree or equivalent experience
• At least 2 years of experience within product development
• Catia knowledge
• Strong technical competence with ability to understand our components and systems
• Fluent in English, both spoken and written
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Senior ADAS engineer

Ansök    Jan 22    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Are you passionate about shaping the future of autonomous driving?

We are looking for a Senior ADAS Engineer to join our team at our customer site.

The role:

You will play a key role in introducing ADAS functions to the European market. Your responsibility includes ensuring these functions meet stringent regulatory requirements, Euro NCAP standards, and customer expectations for quality and performance.

Your primary tasks will include developing detailed functional requirements for the clients’ global teams and suppliers, ensuring that software implementations align with these specifications. Additionally, you’ll collaborate with other teams to provide input on verification and validation needs, ensuring comprehensive testing is conducted across the scope of the functions.

We are looking for:

Educational Background:

• Master’s degree in Electrical or Computer Engineering (or equivalent).

Experience:

• Over 5 years of experience in ADAS/Autonomous Driving feature or system development, or vehicle testing.
• Proven knowledge of ADAS homologation and Euro NCAP testing.

Technical Skills:

• Expertise in requirements engineering and EE architecture.
• Strong understanding of functional requirements development, use case breakdown, KPIs, and performance metrics.
• Familiarity with validation and verification (V&V) practices for software and hardware implementation.

Other Requirements:

• A valid Swedish driver’s license is a must.

What We Value:

• Proactive problem-solving skills and a keen eye for detail.
• A collaborative mindset with the ability to work in global teams.
• A passion for driving safety and innovation in the ADAS field.

Who we are:

At Mpya Sci & Tech, we believe in a sustainable work life where we together build a culture where you can, Be excitedly curious, Be inclusive and allowing and Be who you are. We believe that real talents are the individuals who dare to develop throughout their lives. With long experience and deep knowledge of the industry, we have created a forward-leaning and edgy company, in our own way. Come and flourish together with us in Gothenburg.

Contact:

For questions about the position, you are welcome to contact Talent Advisor Cecilia Karlsson, 076 164 89 00. We work with ongoing selection!
Apply for the position via www.mpyascitech.com. Welcome! Visa mindre

Studio Design Engineer - Automotive Exterior Lighting

Ansök    Jan 17    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
At Blue eye Engineering AB, We are more than a product development company, we offer R&D services and high qualified engineers to contribute towards Automotive engineering development and innovations in Europe.

With offices established in Sweden, Italy, India and Mexico we are proud to stamp global footprint delivering quality products and solutions in Automotive R&D. Our promise is to provide the foundation and stepping stones for your future career development in automotive engineering industry.

We have open position for consultant role to work direct onsite as "Studio Engineer for Automotive Exterior Lighting" to work for a premium electric car brand in Gothenburg-Sweden.

Tasks

Translating engineering requirement into design possibilities
Transferring and describing engineering and key legislative requirements to design
Generate feasible solutions for technically challenging areas
Managing and documenting agreements between design and engineering
Being the voice of design, communicating design intents and needs within engineering
Understand and implement technical input and limitations in the design models
Document feasibility of design themes and raise critical issues
Arbitrate, drive and document agreements between engineering and design departments.
Set up new light concepts in Catia and optical software
Secure up-to date competence in continuity. i.e Benchmark all competitors.
Tech scouting and arranging presentations/workshops with innovation companies and suppliers within the lighting field
Be updated on existing manufacturing methods and technologies

Qualifications
Automotive design studio is Mandatory.
Very deep lamp technology, engineering, and legal requirement knowledge
Mandatory Automotive product concept and component design experience on exterior lighting.
Mandatory optical software experience (SPEOS, Lucidshape, Light tools)
Complete understanding of vehicle development process.
Very good Catia and Teamcenter experience
Technical university or equivalent, +15 years solid working experience from automotive industry is required.
Extensive automotive lamp concept engineering experience with an appreciation for aesthetic challenges. Experience working in an automotive design studio is Mandatory.
An understanding of the engineering and validation processes for vehicle components and systems.
A working knowledge of component manufacturing, tooling requirements and lead times.

Terms
As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Manufacturing Engineering - Joining

Ansök    Jan 17    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

Manufacturing Engineering is the link between the product development and our manufacturing plants all over the world. Our mission is to develop global, lean production processes to create the best manufacturing environments. We make sure our future Volvo cars are manufacturable in efficient processes developed, bought, and installed under our responsibility. Working for Manufacturing Engineering means teamwork, broad responsibilities and learning something new every day. 
Industrialization is a team within the Manufacturing Engineering Propulsion Components, and we are now looking for a new team member. We are a highly engaged local team working towards our biggest plant, Volvo Cars Torslanda. Even though we are a local team, we have global mindset and collaboration. We constantly work on improving our skills and challenge our current way of working. Do you want to be part of our journey? 


What you'll do

As an Equipment Engineer and team member your task will be to create robust, efficient, and improved processes and equipment for Propulsion Components. You will be a part of a team and setting the scene for our new platform. You will have the opportunity to improve the techniques & methods within this field. The team follows the project through product development & feedback, quoting and buying the equipment as well as installing and commissioning. This means that you will take part in cost estimations, development of process concepts, supplier relations, continuous alignment with customer, etc. You dig in where it is needed and are flexible towards late changes and unforeseen situations, using your innovation and determination to succeed.

What you'll bring

We see that you have a degree within Automation, Mechanical Engineering or equivalent experience and have been working within manufacturing engineering. This role also requires one or more of the following special technical skills such as Joining techniques, welding, adhesives, Aluminum welding, etc. We see that you are detail oriented, Quality focus, Good communicator, Hot/ cold welding experiences and PD/PS konwledge is advantage. We believe you are fluent in English, both spoken and written. Swedish language is a merit. We believe you have high ambitions, self-drive and you are curious to learn new technologies. You are a team player and have excellent collaboration and communication skills. Visa mindre

Manufacturing Engineer Geometry

Ansök    Jan 17    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

Manufacturing Engineering is the link between the product development and our manufacturing plants all over the world. Our mission is to develop global, lean production processes to create the best manufacturing environments. We make sure our future Volvo cars are manufacturable in efficient processes developed, bought, and installed under our responsibility. Working for Manufacturing Engineering means teamwork, broad responsibilities and learning something new every day. 
Industrialization is a team within the Manufacturing Engineering Propulsion Components, and we are now looking for a new team member. We are a highly engaged local team working towards our biggest plant, Volvo Cars Torslanda. Even though we are a local team, we have global mindset and collaboration. We constantly work on improving our skills and challenge our current way of working. Do you want to be part of our journey? 


What you'll do

As an Equipment Engineer and team member your task will be to create robust, efficient, and improved processes and equipment for Propulsion Components. You will be a part of a team and setting the scene for our new platform. You will have the opportunity to improve the techniques & methods within this field. The team follows the project through product development & feedback, quoting and buying the equipment as well as installing and commissioning. This means that you will take part in cost estimations, development of process concepts, supplier relations, continuous alignment with customer, etc. You dig in where it is needed and are flexible towards late changes and unforeseen situations, using your innovation and determination to succeed. 

What you'll bring

We see that you have a degree within Automation, Mechanical Engineering or equivalent experience and have been working within manufacturing engineering. This role also requires one or more of the following special technical skills such as mechanical design, CATIA/CAD, Geometry assurance, joining techniques, hot/ cold welding process, PD/PS, etc. We see that you are detail oriented, Quality focus and a good communicator. We believe you are fluent in English, both spoken and written. Swedish language is a merit. We believe you have high ambitions, self-drive and you are curious to learn new technologies. You are a team player and have excellent collaboration and communication skills.

Note: There will be two positions on this regard. One position is requiring competence within Joining skills, and other position is with competence on Geometry & mechanical design. Visa mindre

Battery Cell Simulation Engineer at Volvo Cars

Ansök    Jan 15    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

We are a team of highly skilled engineers within the Battery Hardware department, developing battery models that capture the cell performance, and we also assess cell durability and deliver life estimations to other teams within our organization. What is distinctive about our team is that everyone is included and collaborates well. We will challenge you and expect you to do the same to bring out the best from each one of us!


What you'll do

As Battery Cell Simulation Engineer, you will be responsible of developing analytical models intended for performance and life estimation simulations of battery cells. The models span a wide range of complexity, from models based on first hand physical principles to empirical models such as equivalent circuit representations. Much of the development rely on input from cell testing and an important part of the work is therefore to define test needs and test methods as well as development of methods to extract and calibrate model parameters.

Your work will be used as input by other teams for design of HW components and development of SW functionality in electric and hybrid vehicle projects. As such you will have a close collaboration with colleagues within the department Propulsion & Energy and other engineers within Volvo Cars. The job also involves a close collaboration with test teams and suppliers of cells and modules. 

You will mainly use Python, but also tools like MATLAB/Simulink, Comsol and similar.

What you'll bring

We believe you have a Master of Science degree in chemical engineering, applied physics, mathematics or similar to qualify. You will also need a genuine curiosity for the subject matter as well as a huge interest in modeling and programming. Further, you have excellent analytical and communication skills. 

The ideal candidate for the position has a strong background in analytical work, preferably by modeling components or system behaviors with Python. Knowledge within the battery area is also considered as a valuable competence. Visa mindre

Product Owner inom Automotive

Ansök    Jan 14    TECHCON Sweden AB    Fordonsingenjör
Om Oss: Är du en erfaren Product Owner med teknisk bakgrund och passion för automotive? Vi söker en driven och tekniskt kunnig Product Owner för spännande konsultuppdrag inom bilindustrin. Hos oss får du arbeta med innovativa projekt och vara en nyckelperson i att skapa hållbara och framtidssäkra lösningar för våra kunder. Ansvarsområden för Produktägare inom Bilindustrin Utveckla och underhålla produktroadmaps för långsiktig planering. Översätta affärsbe... Visa mer
Om Oss:
Är du en erfaren Product Owner med teknisk bakgrund och passion för automotive? Vi söker en driven och tekniskt kunnig Product Owner för spännande konsultuppdrag inom bilindustrin. Hos oss får du arbeta med innovativa projekt och vara en nyckelperson i att skapa hållbara och framtidssäkra lösningar för våra kunder.
Ansvarsområden för Produktägare inom Bilindustrin Utveckla och underhålla produktroadmaps för långsiktig planering.
Översätta affärsbehov till tekniska lösningar och säkerställa kvalitet genom hela projektet.
Arbeta i tvärfunktionella team och säkerställa effektiva leveranser.
Hantera intressenters krav och säkerställa framgångsrik projektgenomförande.
Arbeta med för arkitekturfrågor och tekniska lösningar.
Kommunicera tekniska och affärsmässiga aspekter tydligt till alla parter.
Hantera förändringar och kravjusteringar strukturerat.
Vi söker dig som har Teknisk bakgrund, gärna inom automotive.
Erfarenhet av produktroadmaps och att översätta affärsbehov till tekniska lösningar.
Stark analytisk förmåga och erfarenhet av arkitekturfrågor.
Ledaregenskaper och förmåga att leda tvärfunktionella team.
Förmåga att kommunicera tydligt med både tekniska och affärsmässiga målgrupper.
Fördelar med att Arbeta hos Techcon Konkurrenskraftig lön och förmånspaket.
Möjligheter till yrkesmässig och personlig utveckling.
Arbeta i en innovativ och dynamisk arbetsmiljö.
Hur du Ansöker
Skicka ditt CV och personliga brev via ansökningsknappen nedan. Techcon Insight är en arbetsgivare som främjar mångfald och inkludering.
Är du redo att ta nästa steg i din karriär inom automotive? Vi ser fram emot att höra från dig! Visa mindre

Diagnostic Engineer till industri och fordonsbranschen

Nu söker vi på Academic Work, i samarbete med Aleido, en engagerad Diagnosingenjör som vill vara med och driva utvecklingen av avancerade diagnoslösningar. I denna roll blir du en viktig länk mellan teknik och de människor som använder den, med möjlighet att påverka arbetet inom både fordons- och industrisektorerna. OM TJÄNSTEN Som Diagnosingenjör kommer du att arbeta med att utveckla, implementera och optimera diagnoslösningar. Dina huvudsakliga uppgif... Visa mer
Nu söker vi på Academic Work, i samarbete med Aleido, en engagerad Diagnosingenjör som vill vara med och driva utvecklingen av avancerade diagnoslösningar. I denna roll blir du en viktig länk mellan teknik och de människor som använder den, med möjlighet att påverka arbetet inom både fordons- och industrisektorerna.

OM TJÄNSTEN

Som Diagnosingenjör kommer du att arbeta med att utveckla, implementera och optimera diagnoslösningar. Dina huvudsakliga uppgifter inkluderar att:


* Skapa effektiva felsökningsprocesser och identifiera felkoder och symptom.
* Lösa tekniska utmaningar som rör fordonsflottor eller industrimaskiner.
* Testa och validera elektriska system för att säkerställa en hög kvalitet.


Du arbetar både vid datorn med anpassade programvaror och genom praktiska tester för att verifiera diagnoslösningarna. Rollen innebär att skapa tydliga felsökningsdokumentationer och instruktioner på både svenska och engelska. Du har även möjlighet att samarbeta med tekniska illustratörer för att säkerställa att dokumentationen är enkel att förstå och följa.

Rollen ger dig en chans att fördjupa dina kunskaper inom ny teknik såsom el- och hybriddrivlinor, samt avancerade automationssystem. Du arbetar i nära dialog med kunderna och kan antingen vara på plats hos kunden eller från Aleidos kontor, beroende på projektets behov.

Vad Aleido erbjuder:
Aleido värdesätter en inkluderande arbetsmiljö där samarbete, lärande och nytänkande står i fokus. Här får du:
- Stöttning och resurser för att utvecklas i din roll, samtidigt som du uppmuntras att ta initiativ och driva din egen utveckling.
- En arbetsmiljö som främjar flexibilitet och hållbarhet, med möjlighet till distansarbete och en stark lärandekultur.
- Ett brett nätverk inom olika tekniska branscher där du har möjlighet att påverka både din egen och företagets utveckling.

VI SÖKER DIG SOM
...har erfarenhet av diagnostik och felsökning, gärna inom fordons- eller industrisektorn. Vi tror att du har:
- En teknisk utbildningsbakgrund, exempelvis inom fordonsteknik, mekatronik, maskinteknik eller elektronik.
- Ett stort intresse för teknik och en förmåga att sätta dig in i ny avancerad teknik.
- Erfarenhet från arbete i tunga industrier eller diagnostik av industriella system, vilket är meriterande.
- Förmåga att kommunicera obehindrat på svenska och engelska.

För att lyckas i rollen har du följande personliga egenskaper:
- Förändringsbenägen
- Hjälpsam
- Ansvarstagande

Vår rekryteringsprocess

Denna rekryteringsprocess hanteras av Academic Work och vår kunds önskemål är att alla frågor rörande tjänsten skickas till Academic Work.

Vi tillämpar löpande urval och kommer plocka ner annonsen när tillräckligt många kandidater har nått slutskedet i rekryteringsprocessen. Rekryteringsprocessen innehåller två urvalstest: ett personlighetstest och ett test i kognitiv förmåga. Testerna är ett verktyg för att kunna hitta den kandidat med högst potential för tjänsten samt främja jämlikhet, mångfald och en rättvis rekryteringsprocess.

INFORMATION OM FÖRETAGET
Aleido är ett internationellt företag med lång erfarenhet av att tillhandahålla eftermarknadsinformation och utbildningslösningar för tekniskt avancerade produkter. Företaget verkar inom branscher som fordon, telekom, industri, järnväg och medicinteknik. Med tusen medarbetare i fem länder arbetar de för att göra avancerad teknik lätt att förstå och tillgänglig för användare.
Är du redo att bli en del av Aleidos team och utvecklas som Diagnosingenjör? Sök redan idag och ta steget mot en framtid inom en expansiv och dynamisk teknisk miljö! Visa mindre

Embedded software engineer

Ansök    Jan 9    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Gothenburg is the place to be if you want to be part of developing the autonomous vehicles of the future! Is your passion also within ADAS and AD come join Mpya Sci & Tech!

Mpya Sci & Tech is built by and for engineers. We have created a company where you as an Mployee always are in focus. In everything we do, we strive to create a high degree of involvement and to be sensitive to our Mployees ideas about their future work and careers, not by empty words, but through real actions. Building a strong collective culture with favorable conditions for you as employee and finding the assignment where you can be passionate and develop yourself with balance in life. That is how we do it!

We are right now looking for embedded software engineers for the Automotive industry with knowledge in ADAS and Automated Driving development.

Requirements:

• M.Sc. in any of the fields: Physics, Automotive Engineering, Mechatronics, Computer Science, Computer Engineering, or other relevant engineering degree.
• Knowledge of ADAS and Automated Driving development in MATLAB and Simulink
• Programming skills in: C and C++
• Experience with modeling and simulation
• Several years of experience of software development in the Automotive industry and ADAS

Your soft skills:

As an Mployee, we believe you have excellent communication skills and are keen of relationships, both with customers and colleagues. You are positive, organized and have good time management skills. We also believe that you can work both independently as well as part of a team and can display initiative when necessary.

Who we are

At Mpya Sci & Tech, we believe in a sustainable work life where we together build a culture where you can, Be excitedly curious, Be inclusive and allowing and Be who you are.

We believe that the real talents are the individuals who dare to develop throughout their lives. With long experience and deep knowledge of the industry, we have created a forward-leaning and edgy company, in our own way. Come and flourish together with us in Gothenburg and Stockholm.

Application

Does this sound like the opportunity you been waiting for? Please go ahead and apply!

We work with ongoing selection so don´t hesitate to apply via www.mpyascitech.com. Most welcome with your application! Visa mindre

Electromechanical Design Engineer

Ansök    Jan 10    Incontext AB    Fordonsingenjör
At inContext we believe that passion creates an added value. For us, that passion is co-creating the latest technology with amazing people. We love developing both. Electromechanical Designer Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical de... Visa mer
At inContext we believe that passion creates an added value.
For us, that passion is co-creating the latest technology with amazing people.

We love developing both.

Electromechanical Designer

Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical designer to take ownership of cutting-edge projects that drive change in automotive technology.

What You’ll Do:

• Design Innovative Solutions: Take full responsibility for developing high-quality electromechanical systems that meet technical and project requirements.
• Tackle Diverse Projects: Engage in a variety of exciting challenges, from electrical installations to 3D routing, constantly expanding your expertise.
• Work on Advanced Automotive Solutions: Engage in cutting-edge electromechanical projects that drive the future of mobility.
• Collaborate Across Teams: Partner with internal teams, clients, and stakeholders to ensure seamless communication and project alignment.
• Solve Technical Challenges: Dive into complex problems, conducting research and consulting experts to find innovative, practical solutions.
• Lead Presentations & Updates: Share your vision in team meetings and client discussions, articulating technical concepts with clarity and confidence.
• Consulting Flexibility: Enjoy working on a variety of projects, gaining experience across different products and technologies while adapting to dynamic client needs.

What You Bring:

• About 2 years of experience in electromechanical design within a European organization, ideally within the automotive industry.
• Proficiency with 3D design programs such as Catia, Creo, NX or similar
• Expertise in product development, especially in R&D settings.
• Proven ability to own the entire design process from research to delivery.
• Strong verbal and written communication skills
• A proactive mindset that drives you to find the best solutions and manage projects autonomously.

What do we offer?

• Flexible Work Options: We support a balanced work-life approach, giving you the flexibility to manage your time and projects effectively.
• Social & Knowledge Sharing: Take part in regular social activities and continuous knowledge-sharing sessions, helping you connect with colleagues and grow professionally.
• Flat and Open Culture: Enjoy being part of a flat organization with open communication, honest relations and where everyone’s voice is heard.
• Innovate in Automotive: Work on breakthrough technologies that are shaping the future of mobility and electrification.
• Personal development: challenging tasks and a possibility to influence the company
• Make a Difference: Your designs will play a key role in shaping the future of automotive electrification, contributing to a more sustainable and innovative mobility landscape.
• Varied Project Experience: Broaden your expertise by working with different clients, industries, and cutting-edge products.

If you have any questions or concerns, please do not hesitate to contact us.

Welcome with your application! Visa mindre

Calibration Engineer

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engi... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engineer to support our Automotive OEM customers in engine and vehicle level calibration for a diverse range of heavy-duty applications, including vehicles, construction equipment, non-road & marine applications, in the Gothenburg area.
As a consultant company we value your personal skills highly. Being professional is key and you always act upon the best interest of the company as an AVL ambassador towards our customers.
* You will work in the development of complex and focus on the development, calibration and validation of Performance, Emissions or OBD functions
* You will be based mainly onsite at the customer premises, working in their projects

You should have experience from Calibration of heavy-duty engines. We think that you have a BSc or MSc degree in Mechanical/Automotive engineering or equivalent. You are a strong communicator with great networking skills, you are solution focused, eager to learn new skills and driven by self-development.  
* 5 plus years of experience in calibration, development or testing of heavy-duty diesel engines
* Calibration of engine control units (ECU) in development and serial projects at customer setting for Performance, Emissions or OBD
* Understanding new regulations and implementing requirements of a project from concept through serial production 
* Planning, execution and evaluation of stationary and dynamic calibration in engine test benches
* Optimization and testing under various ambient conditions both in facility and in territory 
* Analysis of results, preparation of reports and presentation with recommendations for customer 
* Experience in project planning, co-ordination, and delivery
* Supporting homologation and production start
* Good working knowledge of calibration tools (e.g. ATI VISION, INCA) 
* Knowledge of AVL tools - Cameo, Creta and Concerto
* Very good social and communication skills in English (Swedish is meritorious)
* Working knowledge of Matlab, Simulink or Python 
* Driver’s license B (E and/or C meritorious)
* Willingness to travel Visa mindre

Junior ingenjör inom fordonsdynamik och simulering

Är du en ingenjör med passion för fordonsdynamik och vill arbeta i en roll där simulering och testning är i fokus? Hos dSPACE får du möjligheten att bidra till utvecklingen av framtidens fordon genom att säkerställa kvaliteten på mjukvaran som används i moderna fordonssystem. Om rollen I denna roll kommer du att arbeta med avancerade simulerings- och testmodeller som används för att verifiera och validera fordonssystem. Du blir involverad i både SIL- och ... Visa mer
Är du en ingenjör med passion för fordonsdynamik och vill arbeta i en roll där simulering och testning är i fokus? Hos dSPACE får du möjligheten att bidra till utvecklingen av framtidens fordon genom att säkerställa kvaliteten på mjukvaran som används i moderna fordonssystem.

Om rollen
I denna roll kommer du att arbeta med avancerade simulerings- och testmodeller som används för att verifiera och validera fordonssystem. Du blir involverad i både SIL- och HIL-simuleringar och får utveckla simuleringskedjor i nära samarbete med beräkningsingenjörer. En del av arbetsuppgifterna kommer handla om att optimera realistiska modeller för fordonets dynamik, som sedan används för att simulera olika förhållanden som bland annat regn, inbromsningar och styrning i en virtuell miljö. Du kommer även att bidra till att förbättra processer för kontinuerlig integration och automatisering av testsystemen, där verktyg som Matlab och Simulink står i centrum.

För att säkerställa en framgångsrik start kommer du att genomgå en gedigen internutbildning, där du får fördjupad kunskap om testutrustning och processer.

Om dig
Vi söker dig som är driven, nyfiken och ansvarstagande, med en stark vilja att utvecklas i en tekniskt utmanande miljö. Du har en god kommunikativ förmåga och trivs med att arbeta både självständigt och i team. En analytisk inställning och en förmåga att ta initiativ är avgörande för att lyckas i rollen.

Skallkrav
• Civilingenjör inom maskinteknik eller motsvarande, med relevant masterinriktning
• Kunskap inom Matlab och Simulink.
• Flytande engelska i tal och skrift.

Meriterande
• Programmeringskunskaper i C, C++ och/eller Python.
• Flytande svenska i tal och skrift

Om dSPACE
dSPACE specialiserar sig på simulering och valideringslösningar, särskilt inom utvecklingen av uppkopplade, självkörande och elektriskt drivna fordon. De erbjuder produkter och tjänster för att testa och validera olika funktioner inom bland annat bilindustrin, flygindustrin och andra tekniska områden. dSPACE är känt för sitt samarbete och sin starka team-anda med möjligheter att växa inom hela koncernen. Att arbeta här innebär att vara en del av ett engagerat och kompetent team.

Om Framtiden
Vi på Framtiden arbetar med både bemanning och rekrytering och vill göra skillnad i människors liv. Skillnad gör vi genom att hjälpa människor att hitta rätt jobb och rätt kollega. Vi är specialister på att rekrytera rätt talanger till rätt företag. Framtiden finns på sju orter i Sverige samt i Oslo.

För denna tjänst kommer du att bli direktanställd hos dSPACE.

Villkor
• Placering: Göteborg
• Omfattning: Heltid
• Startdatum: Enligt överenskommelse

Urval sker löpande och tjänsten kan tillsättas innan sista ansökningsdatum, så skicka in din ansökan redan idag! Visa mindre

Component Owner of Elecrical Components

Ansök    Dec 23    Integro Consulting AB    Fordonsingenjör
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment. Work Description: Write Technical Regulation according to requirements and lead the testing of the electrical components Follow up the technical development and quality of the component together with the supplier. Provide installation requirements to the team responsible for pac... Visa mer
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment.
Work Description:
Write Technical Regulation according to requirements and lead the testing of the electrical components
Follow up the technical development and quality of the component together with the supplier.
Provide installation requirements to the team responsible for packaging and installation.
Validate documentation relating to the components, according to the system requirements.
Perform the corresponding HW releases according to the project plan and make sure deliveries are on time.
Coordinate overall quality activities for the component and resolve any issues that might appear.
Lead and propose quality and cost improvement actions

Education:
You have a degree in Electronics/Mechatronics or similar
Competences:
At least 3 years’ experience of Product Development preferably in the automotive industry.
Technical experience of Electrical & Electronics Systems
You have experience of coordinating and leading technical project in a global environment
Used to following a process plan within R&D
Skills:
Excellent communicational skills, written and oral
Proactive
Organized and work in a structured way
Open minded and flexible
Creative and a solution finder
Customer focus
You enjoy working in a global environment with people from various countries and cultures.
Driven and good at networking
QDCF
Leadership skills
Customer oriented and with a business mind set Visa mindre

Vehicle Fleet Manager

. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Are you passionate about creating a real difference and making an impact? As a Test Fleet Manager, you’ll play a key role in ensuring the smooth o... Visa mer
.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

Are you passionate about creating a real difference and making an impact? As a Test Fleet Manager, you’ll play a key role in ensuring the smooth operation of our fleet, managing several hundred trucks and optimizing their performance. With your technical expertise and quick decision-making, you’ll solve problems efficiently and help drive success. Your work will directly influence the efficiency of our operations, and every challenge you face will be an opportunity to innovate and improve.



What you will do


As a Vehicle Fleet Manager for test vehicles, you will be responsible for registering and deregistering vehicles, managing certifications, and handling technical documentation. You will manage insurance claims, damage reports, and the disposition of vehicles. Maintaining contact with authorities, inspection bodies, and other external stakeholders will also be a key part of your role.  

Additionally, you will: 
* Ensure that vehicles comply with legal and technical requirements for operation. 
* Oversee vehicle sales, including handling documentation and collaborating on resale processes. 
Be responsible for controlling costs and streamlining processes within the fleet.


Your future team

We are a passionate team dedicated to ensuring maximum vehicle fleet uptime through proactiveness and innovative problem-solving. With strong technical expertise and a collaborative approach, we manage vehicle maintenance, logistics, and continuous process improvements to advance test vehicle performance – and we make sure to have fun along the way! 

Who are you?


To succeed in this role, you are a proactive problem-solver, capable of making quick decisions, managing complex processes, and driving efficiency across the fleet. Your technical knowledge, attention to detail, and ability to navigate regulatory challenges will be key to your success.  

We believe that you have: 
* An academic degree within a relevant area such as logistics & transport management, vehicle technology, or similar. 
* 5+ years of experience in the automotive or transport industry, preferably within Fleet Management, logistics, or vehicle technology. 
* Leadership experience. 
* Proficiency in handling administrative processes, data management, and IT tools. 
* A solid understanding of regulatory requirements within the transport sector. 


Fluent proficiency in both spoken and written Swedish is required, as well as having permanent residency in Sweden. 

As a person, you are solution-oriented, structured, and have a long-term mindset. You possess a high level of integrity and thrive in a role with significant responsibility and complexity. Creating structure and efficiency in a challenging environment is something you are passionate about. 

What’s in it for you?


We provide a comprehensive compensation and benefits package, and in addition, you will enjoy the following:
* A positive work environment that promotes work-life balance. 
* Collaborating closely with accomplished engineers within a team, sharing knowledge and learning from each other, while also providing mutual support. 
* Opportunities for lifelong learning and career growth. 
Working in an activity-based workspace that offers flexibility in how you work.


Ready for the next move?


If you want to make a real impact in your career, the transportation business is where you want to be. We look forward to meeting you.

If you have any further questions about the role, contact:
Shenyar Karim, [email protected].

The last application date is the 19th of January 2025.



We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination.
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

. Visa mindre

Manufacturing Engineer

Ansök    Dec 23    Integro Consulting AB    Fordonsingenjör
Job description: To lead and coordinate the manufacturing process within R&D for our client in the automotive industry. You are responsible for to drive and follow-up the manufacturing attributes and process solutions within the dedicated plant. Create and upgrade assembly instructions for production. Create and maintain FMEA for your area. Ensure the Digital Pre-Assemblies within programs and report approvals and concerns. Give input to the summary and re... Visa mer
Job description: To lead and coordinate the manufacturing process within R&D for our client in the automotive industry.
You are responsible for to drive and follow-up the manufacturing attributes and process solutions within the dedicated plant.
Create and upgrade assembly instructions for production.
Create and maintain FMEA for your area.
Ensure the Digital Pre-Assemblies within programs and report approvals and concerns.
Give input to the summary and report gate and milestone answers and follow up the defined cost within your area.
Reporting status and deviations in decided systems and tools and ensure that there are actions.
Follow-up of cost within responsible area.
To prepare and implement quality assured, flexible and effective production systems in the assembly plants.
Ensure a process-driven product development by driving forward and co-ordinating Manufacturing activities into design and product development, with focus on production-effective product solutions.
Frequent travels to the different plants


Skills & Experience Required:
Bsc in Mechanical Engineering/Production Engineering or equivalent
Practical work experience from the production process
Skilled in the manufacturing process, methods and tools
Teamcenter knowledge
Fluent in English, spoken and written
Drivers licence B
Skills in Product Development,
6 Sigma is meritorious
Knowledge in CATIA V5, FMEA and other virtual development tools is meritorious
Work experience from the automotive industry preferably Chassis dept.
A great teamplayer
Flexible, helpful, driven
Problem solver and a "doer"
Excellent communicational skills
Analytical and target oriented
Ability to organise and prioritise own work tasks
Positive and pro-active attitude
Strong ability for cross functional and multicultural teamwork
Ability to travel Visa mindre

Design Engineer Wiring Harness

Ansök    Dec 23    Integro Consulting AB    Fordonsingenjör
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry. Job description: The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you w... Visa mer
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry.
Job description:
The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you will report to Scrum master and Product Owner.
Experience required:
-Minimum 3 years of experience designing electromechanical components such as harnesses, PCB, busbars, distributions boxes, metallic and plastic fasteners.
-Experience from working within automotive industry/product development systems.
-Experience from packaging work in tight and complex environments using CATIA V5 and/or Creo with harness module/flattening and Teamcenter.
Skills required:
-Skilled in Catia V5 and/or Creo
-Ability to work in agile teams planning the work and estimating own workload.
-Minimum BSc in Electrical or Mechatronical Engineering or equivalent
-Fluent in English both spoken and written
-Excellent communicational skills and ability to work in a global environment
-Teamplayer who easily can collaborate with others.
Additional info:
We schedule interviews on a rolling basis so do not wait until end date. Visa mindre

Production Tool Designer

Ansök    Dec 23    Integro Consulting AB    Fordonsingenjör
We are looking for a Senior Production Tool Designer with minimum 5 years of work experience within the automotive industry. You will work in a small team in Integro responsible for the design of lifting equipment and fixtures for production for heavy duty vehicles. Experience & Skills required: -Various years of experience of Tooling CAD Design using Catia V5 is a must. 3DX skills is a plus. -Apart from Catia v5, skilled in Windchill PDM, and Inventor. -E... Visa mer
We are looking for a Senior Production Tool Designer with minimum 5 years of work experience within the automotive industry.
You will work in a small team in Integro responsible for the design of lifting equipment and fixtures for production for heavy duty vehicles.
Experience & Skills required:
-Various years of experience of Tooling CAD Design using Catia V5 is a must. 3DX skills is a plus.
-Apart from Catia v5, skilled in Windchill PDM, and Inventor.
-Experience in Product Development systems.
-Experience with CE documentation.
-Fluent English in writing and speaking is necessary.
-Structured Engineer who is used to work in a Production environment
-Flexible and used to have several task going at the same time.
-Good team player and collaboration skills
-Some travelling to Umeå is required, but the work can partly be done remotely
Start as soon as possible. Visa mindre

Digital Modelers - Polygon

Ansök    Dec 17    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
We are seeking a highly skilled and experienced Digital Modeler Consultants specializing in polygon modeling for the automotive industry.

The ideal candidate will have a strong background in creating high-quality digital models for automotive exteriors and interiors, working collaboratively with designers and engineers to bring concepts to life.

This role demands precision, creativity, and a deep understanding of polygon modeling techniques and automotive design processes.

Tasks
- Create detailed, high-quality polygon models for automotive exteriors, interiors, and components.
- Interpret and translate 2D sketches, design briefs, and CAD data into 3D digital models.
- Collaborate with design and engineering teams to ensure models meet aesthetic and functional requirements.
- Optimize polygonal models for real-time visualization, rendering, and VR applications.
- Maintain a high level of accuracy and surface quality while adhering to tight project timelines.
- Support the design iteration process by making modifications and refinements based on feedback.
- Ensure compatibility and integration of models within the broader design and production workflows.

Qualifications
- Proven experience as a Digital Modeler specializing in polygon modeling for the automotive industry. Minimum 10+ years
- Expertise in software tools such as Maya, Blender, Autodesk Alias, Rhino, or similar.
- Strong understanding of automotive design principles, proportions, and surface development.
- Ability to create both high-resolution and low-polygon models, depending on project needs.
- Familiarity with rendering tools (e.g., KeyShot, VRED) and visualization pipelines is a plus.
- Excellent communication skills and ability to work collaboratively in a cross-functional team.
- Strong problem-solving skills and attention to detail.
- Ability to manage multiple projects and meet deadlines in a fast-paced environment.

Terms




As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Test Fleet Manager

. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Are you passionate about creating a real difference and making an impact? As a Test Fleet Manager, you’ll play a key role in ensuring the smooth o... Visa mer
.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

Are you passionate about creating a real difference and making an impact? As a Test Fleet Manager, you’ll play a key role in ensuring the smooth operation of our fleet, managing several hundred trucks and optimizing their performance. With your technical expertise and quick decision-making, you’ll solve problems efficiently and help drive success. Your work will directly influence the efficiency of our operations, and every challenge you face will be an opportunity to innovate and improve.


What you will do

As a Test Fleet Manager, you will be responsible for registering and deregistering vehicles, managing certifications, and handling technical documentation. You will manage insurance claims, damage reports, and the disposition of vehicles. Maintaining contact with authorities, inspection bodies, and other external stakeholders will also be a key part of your role.

Additionally, you will: 
* Ensure that vehicles comply with legal and technical requirements for operation.
* Oversee vehicle sales, including handling documentation and collaborating on resale processes.
* Be responsible for controlling costs and streamlining processes within the fleet.


Your future team

We are a passionate team dedicated to ensuring maximum vehicle fleet uptime through proactiveness and innovative problem-solving. With strong technical expertise and a collaborative approach, we manage vehicle maintenance, logistics, and continuous process improvements to advance test vehicle performance – and we make sure to have fun along the way!

Who are you?

To succeed in this role, you are a proactive problem-solver, capable of making quick decisions, managing complex processes, and driving efficiency across the fleet. Your technical knowledge, attention to detail, and ability to navigate regulatory challenges will be key to your success.

We believe that you have:
* An academic degree within a relevant area such as logistics & transport management, vehicle technology, or similar.
* 5+ years of experience in the automotive or transport industry, preferably within Fleet Management, logistics, or vehicle technology.
* Leadership experience.
* Proficiency in handling administrative processes, data management, and IT tools.
* A solid understanding of regulatory requirements within the transport sector.


Fluent proficiency in both spoken and written Swedish is required.

As a person, you are solution-oriented, structured, and have a long-term mindset. You possess a high level of integrity and thrive in a role with significant responsibility and complexity. Creating structure and efficiency in a challenging environment is something you are passionate about.


What’s in it for you?

We provide a comprehensive compensation and benefits package, and in addition, you will enjoy the following:
* A positive work environment that promotes work-life balance. 
* Collaborating closely with accomplished engineers within a team, sharing knowledge and learning from each other, while also providing mutual support. 
* Opportunities for lifelong learning and career growth. 
* Working in an activity-based workspace that offers flexibility in how you work.


Ready for the next move?

If you want to make a real impact in your career, the transportation business is where you want to be. We look forward to meeting you.


If you have any further questions about the role, contact:

Shenyar Karim, [email protected].

The last application date is the 19th of January 2025.
We value your data privacy and therefore do not accept applications via mail. 

Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Digital Modelers

Ansök    Dec 17    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
We are seeking a skilled Digital Modelers Consultants to join work with our Automotive customer that is focusing on late-phase interior projects.

This role involves collaborating closely with Designers and Studio Engineers to develop surface models that meet the highest standards of design and engineering excellence.

Tasks
- Collaborate with Designers and Studio Engineers to create surface models for late-phase interior projects.
- Utilize conceptual modeling tools such as Blender or Alias Sub-D to develop flexible, high-speed designs.
- Deliver high-quality A-class surface modeling using Alias or IcemSurf, ensuring premium results.
- Interpret and integrate technical inputs effectively to meet project requirements and deadlines.

Qualifications
- Need to have extensive knowledge and experience from similar work with Alias or IcemSurf within automotive industry. Minimum 10+ years.
- Professional Proficiency in conceptual modeling tools (e.g., Blender, Alias Sub-D).
- Expertise in A-class modeling using Alias or IcemSurf.
- Strong understanding of technical specifications and their application in surface modeling.
- Ability to work with flexibility and speed, delivering high-quality results under tight deadlines.
- Previous experience in late-phase design projects is highly advantageous.

Terms
As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Clay Modeler - Automotive

Ansök    Dec 17    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 


Mechanical Design for exterior & Interior automotive.



Description
Our customer is a leading OEM in Swedish Automotive industry.

Clay has been used since the earliest stages of car design and emphasizes the strong links between three-dimensional
automotive styling and sculpture.

We are looking to formulate a team of high skilled Clay Modellers (5-8) to work with existing and new projects in different phases of design development together with creative design teams.



Tasks
The work tasks would consist of 3D physical model development.

Clay modelling on exterior and interior models, 3D scanning of physical models, preparation of model armatures, preparation of models and parts for milling and paint.

Qualifications
Minimum experience (10+ years) Clay modelling within the automotive industry.

A genuine interest in new studio technology and willingness to learn new ways of working.

Fluent in English (speaking and writing) communicative and ability to work within a multi-cultural team.

Full design studio and workshop knowledge including the safe operation of workshop machinery.

We are looking for an enthusiastic and positive individual who will add to our team



Terms




As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

CAE - MBD engineer

Ansök    Dec 17    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
We are seeking an experienced CAE Multibody Dynamics (MBD) Engineer to work with our Automotive customer in Gothenburg as a consultant.

The ideal candidate will play a pivotal role in supporting Road Load Data (RLD) simulations, working independently on advanced simulation projects, and collaborating with cross-functional teams to deliver high-quality results.

Tasks
- Conduct full vehicle Road Load Data (RLD) simulations to support design validation.
- Perform chassis rig Digital Twin simulations to validate test signals.
- Implement Multibody Simulation (MBS) CAE models for specific durability test events and correlate results with measured road load data.
- Independently develop and execute simulations in ADAMS/Car with minimal supervision.
- Analyze simulation results and suggest design changes to improve durability and performance.
- Collaborate and communicate findings with the design team and attribute leaders.

Qualifications
- Proven expertise in Multibody Dynamics (MBD) and vehicle modeling.
- Proficient in ADAMS/Car, with extensive experience in full vehicle modeling and simulations.
- Ability to work independently and deliver high-quality results with minimal supervision.
- Experience in powertrain modeling and simulation is an advantage.
- Familiarity with EU modeling standards and processes is a plus.
- Strong programming skills in Python and proficiency with MATLAB and HEEDS for optimization tasks.

Terms
As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Ingenjör inom Simulering och Analys

Ansök    Dec 17    Nexer Mobility AB    Fordonsingenjör
Har du en passion för teknisk akustik och simulation? Vi på Nexer Mobility söker nu efter dig som är ingenjör som vill jobba inom Simulering och Analys. Med en lång erfarenhet inom branschen så har vi hittat vår grund som vi tror på och som vi utgår ifrån när vi bygger upp Nexer Mobility tillsammans med våra medarbetare. I vårt dagliga arbete är du som individ i fokus då vi utgår från varje medarbetares utgångspunkt och förutsättning. Hur vi arbetar, komme... Visa mer
Har du en passion för teknisk akustik och simulation? Vi på Nexer Mobility söker nu efter dig som är ingenjör som vill jobba inom Simulering och Analys.
Med en lång erfarenhet inom branschen så har vi hittat vår grund som vi tror på och som vi utgår ifrån när vi bygger upp Nexer Mobility tillsammans med våra medarbetare. I vårt dagliga arbete är du som individ i fokus då vi utgår från varje medarbetares utgångspunkt och förutsättning. Hur vi arbetar, kommer vi att berätta mer om när vi träffas.
Om rollen
Vi erbjuder ett brett utbud av uppdrag och därför kan arbetets karaktär variera. Uppdraget kan därför komma att passa hos flera av våra kunder inom fordonsindustrin. Gemensamt för alla uppdrag är att de är långsiktiga, kvalificerade och utmanande, samtidigt som du garanterat har roligt på jobbet!
Som Ingenjör inom Simulering och Analys kan dina arbetsuppgifter innebära att arbeta med aero-akustiska miljöer, med särskilt fokus på sidospeglar och olika hyttmodeller. Du kommer även arbeta med simuleringar och en del projektledning - för att säkerställa effektiva analyser av fordonsbuller och vibrationer.
I rollen förväntas det även att samarbeta med ett Complete Vehicle-team samt att ge simuleringsstöd för att korrigera testdata med hänsyn till bakgrundsbuller och vibrationer i vindtunnel. I rollen ingår även att rapportera projektframsteg, planera kommande projekt, hantera utgifter och övervaka projektgenomförandet.
Vi ser gärna att du tidigare har arbetat med testning och NVH (Noise, vibration, and harshness)-fältet för fordonsindustrin.
Andra meriterande kompetenser
Tidigare erfarenhet av arbete involverat kring bullerreglering och bulleranalys
B.Sc. eller M.Sc. i Fysik, Strömningsmekanik (Fluid mechanics), Mekanik eller motsvarande
Har kunskaper inom strömningsmekanik eller teknisk akustik
Kunskaper i programva som StarCCM+, Actran och Ansa
Att du som person är kommunikativ och är en naturlig projektledare med hög samarbetsförmåga

För den här rollen är det ett krav att du behärskar både svenska och engelska flytande, i både tal samt skrift.
Tjänsten kommer att tillsättas löpande så vänta inte med din ansökan! Vi har tyvärr ingen möjlighet att ta emot ansökningar via mail. Har du frågor så är du välkommen att kontakta Johanna Rydén på [email protected].
Nexer som arbetsgivare
Jobbar du på Nexer får du en modig och entreprenörsdriven arbetsgivare med internationell närvaro. Vi är stolta över att leda den digitala revolutionen och vara i teknikens framkant, alltid med ett agilt och framåtlutat förhållningssätt. Här får du unika möjligheter att drömma stort, agera smart och utvecklas. Vi är ett familjeägt bolag med långsiktiga strategier, vilket innebär att du är nära de som fattar beslut och kan vara med och påverka. Dessutom erbjuder vi en flexibel arbetspolicy, där det finns möjlighet att arbeta på distans när det passar dig och ditt uppdrag.
Vår kultur
Vår vision är Promising future – det är viktigt för oss att göra skillnad och bidra till en bättre framtid. Vi har ett engagemang för våra kunder och en uppriktig omtanke om varandra. Vi omfamnar mångfald och tror att människor med olika bakgrunder och erfarenheter gör vårt arbete och vårt företag bättre. Vi värdesätter innovation och viljan att utvecklas och ta nästa steg – framåt och uppåt. Dessutom har vi roligt på jobbet! Visa mindre

KONSTRUKTÖRER OCH PRODUKTUTVECKLARE TILL GÖTEBORG

Till teamet inom Mechanical Engineering i Göteborg söker vi fler duktiga konstruktörer och produktutvecklingsingenjörer! I rollen som Employeneur får du både utveckla dina tekniska kunskaper och driva din egen utveckling och affär. Du blir del av en innovativ och entreprenöriell organisation där fokuset ligger på ständig utveckling och möjligheten att vara fullt ansvarig för din egen karriär. Vi är nyfikna på dig som är utbildad högskole- eller civilingenj... Visa mer
Till teamet inom Mechanical Engineering i Göteborg söker vi fler duktiga konstruktörer och produktutvecklingsingenjörer! I rollen som Employeneur får du både utveckla dina tekniska kunskaper och driva din egen utveckling och affär. Du blir del av en innovativ och entreprenöriell organisation där fokuset ligger på ständig utveckling och möjligheten att vara fullt ansvarig för din egen karriär. Vi är nyfikna på dig som är utbildad högskole- eller civilingenjör med tidigare erfarenhet i just rollen som konstruktör eller produktutvecklare.
| VAD FÖRVÄNTAR VI OSS AV DIG?
Vi lägger stor vikt vid ditt personliga engagemang och din vilja att driva din utveckling framåt. För att lyckas med det ges du chansen att själv påverka vilken typ av projekt du tar dig an och där dina önskemål av projekt är av stor vikt. Du väljer även själv vilken kompetensutveckling du vill investera i. Du styr din karriär och personliga utveckling helt enkelt.
Som Employeneur i teamet inom Mechanical Engineering kommer du att arbeta som CAD konstruktör eller produktutvecklingsingenjör tillsammans med våra kunder runt om i Storgöteborg. Arbetsuppgifterna är många och innefattar bland annat produktutvecklingsarbete, CAD, kravställning, projektledning, dokumentation, testning samt jobba mot såväl interna som externa kunder och leverantörer. Att jobba tillsammans med andra i en dynamisk miljö med tvärvetenskapliga discipliner, gör att du vässar dina tekniska färdigheter och även din sociala förmåga när du samarbetar med dina kollegor.
Vi är nyfikna på dig som är utbildad högskole- eller civilingenjör och har minst 7-10 års erfarenhet av relevanta arbetsuppgifter inom Automotive. Brinner du dessutom för att förbättra och effektivisera produkter och komponenter för att skapa ett bättre system då är du intressant för oss. Vi förutsätter att du kan både engelska och svenska flytande.
| VAD KAN DU FÖRVÄNTA DIG AV TMC?
Genom Employeneurship-modellen är TMC unika. Det är affärsmodellen för 2000-talets ingenjörer och den bygger på fem pelare:
A LONG TERM WORKING RELATIONSHIP
På TMC kombinerar du säkerheten av en trygg anställning med de möjligheter som entreprenörskap erbjuder. Detta eliminerar osäkerheten man kan uppleva som konsult eller entreprenör och du får mer tid och energi till att fokusera på ditt arbete och dina långsiktiga ambitioner och mål.
INDIVIDUAL PROFIT SHARING
Employeneurship-modellen erbjuder en marknadsmässig grundlön samtidigt som dina entreprenöriella förmågor premieras och du tar del av vinsten. Du som Employeneur har möjlighet att själv påverka säljprocessen utifrån din kompetens och vi är transparenta när det kommer till både din omsättning och dina kostnader. Känn ditt marknadsvärde och dela vinsten som ditt arbete genererar!
BUSINESS CELLS
Som Employeneur tillhör du en Business Cell baserat på ditt tekniska kompetensområde. Dessa specialistområden utgår från teknologiska nischkompetenser och skapar nätverk mellan dig och andra Employeneurer med liknande bakgrund. Du som Employeneur blir del av ett starkt och relevant internationellt nätverk som möjliggör ett delat engagemang i kombination med kunskaps- och erfarenhetsutbyte.
YOUNIVERSITY
TMC värderar dig som Employeneur högt och har utvecklat ett program för att garantera din personliga och professionella utveckling, din YOUrney. YOUniversity är ett unikt program för din utveckling och är tänkt att stödja dig genom din karriär. Genom personlig 1-1 coaching får du möjlighet att utvecklas, både som individ och i ditt entreprenörskap. Att ge dig möjlighet till både personlig och professionell utveckling ser vi som bästa möjliga investering!
THE ENTREPENEURIAL LAB
The Entrepreneurial Lab erbjuder utrymme för Employeneurer inom TMC att samarbeta över gränser. Vi vill att du ska förverkliga dina drömmar och utveckla ditt entreprenörskap. The Entrepreneurial Lab drivs av en självgående proaktiv attityd hos dig som Employeneur som skapar värde för dig själv men självklart också för våra kunder. Se The Entrepreneurial Lab som en lekplats för nya idéer, produkter som tjänster.
Eftersom TMC är ett internationellt företag kan vi erbjuda projekt på olika platser i olika länder där vi och våra kunder finns. För närvarande finns vi representerade i Sverige, Nederländerna, Belgien, Frankrike, Spanien, Portugal, Italien, U.A.E., USA och Kanada. Du får världen som arbetsplats!
| VARFÖR EMPLOYENEURSHIP?
Uttrycket Employeneurship kanske låter obekant, det beror på att vi uppfann det. Inte bara som ett ord utan som ett sätt att arbeta, eller till och med ett paradigm. Att vara Employeneur är mycket mer än att bara arbeta som teknisk konsult. Denna unika roll ger dig möjlighet att tänka och agera som en entreprenör i kombination med den trygghet en anställning ger. Viktigast av allt - du får en garanti för ständig utveckling och möjligheten att vara fullt ansvarig för din egen karriär.
Ta chansen att vara del av vår växande verksamhet. Ansök så pratar vi mer om din plan! Visa mindre

Analysis Engineer

Ansök    Dec 15    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

Software Update - Complete Vehicle Engineering
What we offer 
Do you like to take part in developing our new focus area, responsible for SW-update in complete vehicles and test objects for different purpose and project’s. We are a shared service team, consisting of experienced colleagues and we can offer you the opportunity to work with all vehicle programs throughout the concept phase until start of production.

What you'll do

Your main task will be to support with SW-update in test objects and deliver updated test objects to secure further testing with latest software. This include update test objects to the latest baseline or according to costumers’ desire as well as downloading and sort baselines during different project phases. You will have a close collaboration with our customers from different stakeholders with Volvo Cars. 

What you'll bring

You take initiative to introduce new solutions and do not hesitate to ask colleagues for help as well as assist when needed. The role will also require a driven person, good computer skills, driving license (B) and acting as team player. If you have knowledge about Volvos internal processes and basic knowledge of DSA, PIE R&D, PIE, test object process and/or fault tracing it is considered meritorious. Visa mindre

Software Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Software Engineer to strengthen our team in Gothenburg. AREA OF RESPONSIBILITY • Analysis and review of stake holder and system requirements. • Design concept and solutions based on input requirements. • Development of application s... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Software Engineer to strengthen our team in Gothenburg.
AREA OF RESPONSIBILITY
• Analysis and review of stake holder and system requirements.
• Design concept and solutions based on input requirements.
• Development of application software components for traction inverters according to software standards such as ASPICE, ISO26262.
• Testing of solutions from unit level to system integration.
• Support integration of software components and solutions.
• Support the continuous improvements of processes and tools.
EXPERIENCE / KNOWLEGDE
• Degree in Electrical & Electronic Engineering, Mechatronics, Control Engineering or similar
• Substantial experience in the model-based development with MATLAB / Simulink, including code generation and toolboxes for validation and requirements management.
• Experience on development of traction inverter systems(inverter + e-machine)
• Knowledge on torque estimation, torque arbitration and monitoring, safe states(FW/ASC) is a plus
• Knowledge and experience of scripting languages
• Experience in analysis and testing tools, such as Simulink test, Test viewer.
• Experience in software development processes (e.g., GIT), as well as automotive development processes (e.g., V-Model, ASPICE)
• Knowledge and experience in AUTOSAR
• Independent working style with a willingness to take on responsibilities
• Good communication and team-working skills
• Fluent in English and excellent spoken and written communication skills.
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Mechanical Design Engineer

Ansök    Dec 11    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

What’s in it for you?
The EDS Uni& Floor harness team exist within the complete Electrical Infrastructure Department. This team is responsible for the mechanical design and development of a vehicles electrical 'nervous' system, called wiring harnesses, particularly Uni & Floor harnesses. If you are the right person for this job, you will realise the opportunity to play a key role for the company’s performance in this area. You’ll learn to use the right tools, methods, processes to create and design wiring harnesses supporting the realization of electrical vehicle functions or features. Not only will you increase your technical knowledge of the design and development, but also, increase your contacts in the automotive industry.
What you’ll do
A position is now available as a Wiring Harness Design Engineer to help us define and develop our future galvanic electrical structure. The engineer’s responsibility is to design and develop the harnesses located within the Cabin area.
The job entails mechanically routing or physically connecting electrical components with wiring bundles, fulfilling numerous requirements and guidelines from Electrical performance, EMC and making sure that the end product is of high quality, can be manufactured by suppliers and assembled with ease in vehicle assembly plants.  

The work includes, but is by no means limited to, the design and development of virtual harness models, creating corresponding 2D/3D drawings for specification, coordinating with suppliers making sure that they deliver top quality harnesses manufactured based on the design, as well as, verification of harnesses to make sure that the solutions work robustly as intended.    
Working in a highly effective team, you strive to continually develop yourself and the team; you contribute in developing new ways of working to be at the forefront of industry.
You will also:
•    Initiate, lead and drive the design and development of wiring harnesses under the team’s responsibility
•    Perform investigations and verification of harnesses to reach reliability, cost and performance in the electrical system
•    Be part of team efforts to develop solutions across platforms

What you will bring
You have proven technical skills and experience within the area of Design of Mechanical installation, materials included in the electrical distribution system and vehicle functions supported by specific harnesses, including the manufacturing process and complexity of wire harness. You are capable of delivering major or complex development tasks in a cross-functional team environment, skilled in balancing and integrating design aspects in collaboration with internal and external stakeholders and have the ability to act a as tutor or mentor in the area of expertise. You are very skilled in & drives improvements of relevant design tools, methods and processes
You are experienced and skilled in VPDS framework and have release experience, has the ability to secure product flow and deliveries and able to organize the work for a team and coaching team members. You have an effective communication and collaboration skills. You have the ability to work with Continuous Improvements in the team and skilled in Continuous Integration, test object builds (bench, riggs, prototype car, etc.).
You have working experience in the following tools.
•    Catia V5 including Electrical workbench
•    3DPMI
•    Capital Design
•    TCe and TC Vis
•    System Weaver or Car Weaver
•    EiDB 
•    KDP
•    PCT
Also, you have knowledge in the following areas.
•    Electromagnetic Compatibility
•    Electrical Performance
•    Electrical system design
•    RQA (Routing Quality Assessment, FMEA)
•    Volvo cars Design guidelines (harness, connectors and components)
•    Electrical Schematics 
•    Complexity
You are fluent in English. It’s also meritorious if you can comprehend Swedish and has a driving license B.
You are an Electrical/Mechanical degree holder, BS or MS. Or, you have a technical education at university in Electrical/Mechanical Engineering, Mechatronics or similar competence level achieved through working experience Visa mindre

Senior Technical Lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg. Responsibilities · Perform fault slip through analysis of issues reported from test fleets/aftermarket etc. · Implement necessary actions to ensure these issues are captured withi... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg.
Responsibilities
· Perform fault slip through analysis of issues reported from test fleets/aftermarket etc.
· Implement necessary actions to ensure these issues are captured within the CI chain in the future
· Monitoring of test verdicts and determine whether tests failed are related to the environment or the product and create/assign problem reports correctly.
· Co-ordinate with Hardware in loop Engineering teams to address the issues with respect to HIL environments.
· Support and coordinate CI flows for high uptime and stability by ensuring that pipeline crashes, rig issues instability issues etc. are addressed and solved ASAP to get the pipeline up and running thus minimizing downtime.
· CI flow metric acquisition and visualization by Establishing metrics for measuring the CI pipeline performance and create dashboards where performance metrics are visualized.
· Identify gaps or improvements of CI pipelines in terms of efficiency, performance, capability etc.
· Establish a good WoW for CI pipelines together with different customer teams.
Requirements
· Bachelor's/Masters degree in Electrical or Computer Science Engineering or related field.
· Extensive automotive experience in SW verification and Validation.
· Extensive experience working with Continuous Integration work flow.
· Proficient in any one of programming language (C, C++, Python, Java etc.)
· Experience in working with CANoe,HIL systems, Git,Command line, SSH.
· Experience from Agile way of working.
· Good understanding of Automotive electrical architecture and Embedded systems.
· Good communication and collaboration skills.
· Ability to work in a fast-paced and deadline-oriented environment.
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Technical Lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg. Scope of Role As a Technical Lead, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solutions division at Europe. Your primary f... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg.
Scope of Role
As a Technical Lead, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solutions division at Europe. Your primary focus will be on test automation and quality assurance for Key and upcoming accounts in the Europe Region, with a specific emphasis on Hardware-in-the-Loop (HIL) testing. You will be responsible for analyzing Continuous Integration (CI) runs, debugging issues, automating test cases, and overseeing both manual and automated testing processes. Additionally, you will be tasked with designing intuitive graphical user interfaces (GUIs) and Power BI Dashboards to visualize key metrics.
Responsibilities
· Product responsibility over a certain area. Good communication skills will be needed.
· Analyze Continuous Integration (CI) runs and identify and troubleshoot issues to ensure the reliability and accuracy of testing processes.
· Develop automated test scripts for the core rig, encompassing both HIL testing and continuous integration environments.
· Collaborate with cross-functional teams to ensure seamless integration of testing solutions within the project development lifecycle.
Desired Skills
· Strong experience in System Integration Level (SIL), Model-in-the-Loop (MIL), and Hardware-in-the-Loop (HIL) testing methodologies.
· Proficiency in virtualization and familiarity with ASPICE (Automotive Software Process Improvement and Capability Determination).
· Proficient in tools such as VTest Studio, Systemweaver, GIT/Gerrit, Jenkins, PowerBI, Canoe, git.
· Skilled in programming languages including Python, CAPL, C/C++
· Ability to work in a collaborative environment, effectively communicate across teams, and present technical insights to stakeholders.
Knowledge / Experience
· At least 5 years’ experience in similar areas with an embeeded background with 5 years of relevant experience in Software Development or Test Automation.
· Should have prior-experience and skills in Automotive Embeeded area with knowledge such as CAN/LIN/Flexray/Ethernet.
· Experience of Scrum and working with remote teams across the globe.
· Excellent communications skills demonstrated ability to communicate at all levels.
· Experience of Hardware in the loop testing.
· Master Degree in Software Engineering, Automation or Electronics Engineering
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Junior ingenjör inom fordonsdynamik och simulering

Är du en ingenjör med passion för fordonsdynamik och vill arbeta i en roll där simulering och testning är i fokus? Hos dSPACE får du möjligheten att bidra till utvecklingen av framtidens fordon genom att säkerställa kvaliteten på mjukvaran som används i moderna fordonssystem. Om rollen I denna roll kommer du att arbeta med avancerade simulerings- och testmodeller som används för att verifiera och validera fordonssystem. Du blir involverad i både SIL- och ... Visa mer
Är du en ingenjör med passion för fordonsdynamik och vill arbeta i en roll där simulering och testning är i fokus? Hos dSPACE får du möjligheten att bidra till utvecklingen av framtidens fordon genom att säkerställa kvaliteten på mjukvaran som används i moderna fordonssystem.

Om rollen
I denna roll kommer du att arbeta med avancerade simulerings- och testmodeller som används för att verifiera och validera fordonssystem. Du blir involverad i både SIL- och HIL-simuleringar och får utveckla simuleringskedjor i nära samarbete med beräkningsingenjörer. En del av arbetsuppgifterna kommer handla om att optimera realistiska modeller för fordonets dynamik, som sedan används för att simulera olika förhållanden som bland annat regn, inbromsningar och styrning i en virtuell miljö. Du kommer även att bidra till att förbättra processer för kontinuerlig integration och automatisering av testsystemen, där verktyg som Matlab och Simulink står i centrum.

För att säkerställa en framgångsrik start kommer du att genomgå en gedigen internutbildning, där du får fördjupad kunskap om testutrustning och processer.

Om dig
Vi söker dig som är driven, nyfiken och ansvarstagande, med en stark vilja att utvecklas i en tekniskt utmanande miljö. Du har en god kommunikativ förmåga och trivs med att arbeta både självständigt och i team. En analytisk inställning och en förmåga att ta initiativ är avgörande för att lyckas i rollen.

Skallkrav
• Civilingenjör inom maskinteknik eller motsvarande, med relevant masterinriktning
• Kunskap inom Matlab och Simulink.
• Flytande engelska i tal och skrift.

Meriterande
• Programmeringskunskaper i C, C++ och/eller Python.
• Flytande svenska i tal och skrift

Om dSPACE
dSPACE specialiserar sig på simulering och valideringslösningar, särskilt inom utvecklingen av uppkopplade, självkörande och elektriskt drivna fordon. De erbjuder produkter och tjänster för att testa och validera olika funktioner inom bland annat bilindustrin, flygindustrin och andra tekniska områden. dSPACE är känt för sitt samarbete och sin starka team-anda med möjligheter att växa inom hela koncernen. Att arbeta här innebär att vara en del av ett engagerat och kompetent team.

Om Framtiden
Vi på Framtiden arbetar med både bemanning och rekrytering och vill göra skillnad i människors liv. Skillnad gör vi genom att hjälpa människor att hitta rätt jobb och rätt kollega. Vi är specialister på att rekrytera rätt talanger till rätt företag. Framtiden finns på sju orter i Sverige samt i Oslo.

För denna tjänst kommer du att bli direktanställd hos dSPACE.

Villkor
• Placering: Göteborg
• Omfattning: Heltid
• Startdatum: Enligt överenskommelse

Urval sker löpande och tjänsten kan tillsättas innan sista ansökningsdatum, så skicka in din ansökan redan idag! Visa mindre

Test Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for an Embedded Test Automation Engineer to strengthen our team in Gothenburg. Scope of Role As an Embedded Test Automation Engineer, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solu... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for an Embedded Test Automation Engineer to strengthen our team in Gothenburg.
Scope of Role
As an Embedded Test Automation Engineer, you will play a pivotal role in ensuring the highest levels of project delivery within the Embedded Solutions division at Europe. Your primary focus will be on test automation and quality assurance for Key and upcoming accounts in the Europe Region, with a specific emphasis on Hardware-in-the-Loop (HIL) testing. You will be responsible for analyzing Continuous Integration (CI) runs, debugging issues, automating test cases, and overseeing both manual and automated testing processes. Additionally, you will be tasked with designing intuitive graphical user interfaces (GUIs) and Power BI Dashboards to visualize key metrics.
Responsibilities
· Product responsibility over a certain area. Good communication skills will be needed.
· Analyze Continuous Integration (CI) runs and identify and troubleshoot issues to ensure the reliability and accuracy of testing processes.
· Develop automated test scripts for the core rig, encompassing both HIL testing and continuous integration environments.
· Collaborate with cross-functional teams to ensure seamless integration of testing solutions within the project development lifecycle.
Desired Skills
· Strong experience in System Integration Level (SIL), Model-in-the-Loop (MIL), and Hardware-in-the-Loop (HIL) testing methodologies.
· Proficiency in virtualization and familiarity with ASPICE (Automotive Software Process Improvement and Capability Determination).
· Proficient in tools such as VTest Studio, Systemweaver, GIT/Gerrit, Jenkins, PowerBI, Canoe, git.
· Skilled in programming languages including Python, CAPL, C/C++
· Ability to work in a collaborative environment, effectively communicate across teams, and present technical insights to stakeholders.
Knowledge / Experience
· At least 5 years’ experience in similar areas with an embeeded background with 5 years of relevant experience in Software Development or Test Automation.
· Should have prior-experience and skills in Automotive Embeeded area with knowledge such as CAN/LIN/Flexray/Ethernet.
· Experience of Scrum and working with remote teams across the globe.
· Excellent communications skills demonstrated ability to communicate at all levels.
· Experience of Hardware in the loop testing.
· Master Degree in Software Engineering, Automation or Electronics Engineering
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Diagnostic Engineer

Ansök    Nov 28    Integro Consulting AB    Fordonsingenjör
We are looking for a Diagnostic Engineer for our client within the automotive industry. You will be working on the client's site in agile teams. Job Description: · Develop diagnostic method information for aftermarket · Create and maintain diagnostic specifications. · Develop test and calibration operations on vehicle and component level. · Support the development of new or changed functionality in various diagnostic tools · Be a part of developing new dat... Visa mer
We are looking for a Diagnostic Engineer for our client within the automotive industry. You will be working on the client's site in agile teams.
Job Description:
· Develop diagnostic method information for aftermarket
· Create and maintain diagnostic specifications.
· Develop test and calibration operations on vehicle and component level.
· Support the development of new or changed functionality in various diagnostic tools
· Be a part of developing new data structure for future diagnostics content information.
· Implement test and calibration operations based on specifications.
· Analyze test result and manage corrections of issues.
· Review and approve all new and modified specifications.
· Perform unit test of the implemented method/operation and bugs
· Secure verification of the implemented method/operation.
· Ensure that the methods/operations fulfil good design practice
Experience Required:
· Minimum Bachelor’s degree in Mechatronics, Electrical Engineering, Computer Science or similar
· Preferably 3 years of work experience within diagnostics
· Experience from the automotive industry plus if you have worked in Aftermarket
· Experience of Agile way of working-SAFe
· Used to working in an international environment
· A plus if you have experience in machine learning
Skills Required:
· Good to have a software developer/Testing background
· Know CANoe/CANalyzer, and Python
· Driven, helpful and have a “can-dilled o attitude”
· Excellent communication and presentation skills
· Fluent in English both spoken and written
· Good at relationship building/networking
· A team player
· A plus if you have practical workshop /mechanic skills Visa mindre

Testing - Exhaust aftertreatment

Ansök    Nov 25    Comatec Sweden AB    Fordonsingenjör
Comatec Sweden AB is looking for a test engineer in the field of exhaust aftertreatment for an assignment with our customers in Gothenburg. Tasks: - Plan samples - Carry out tests - Analyzing test data - Report - Development & improvements You should have experience within testing and internal combustion engines, be “hand on”, communicative (fluent in English) and like problem solving. Qualifications: - Engineering degree in chemical or mechanical enginee... Visa mer
Comatec Sweden AB is looking for a test engineer in the field of exhaust aftertreatment for an assignment with our customers in Gothenburg.
Tasks:
- Plan samples
- Carry out tests
- Analyzing test data
- Report
- Development & improvements
You should have experience within testing and internal combustion engines, be “hand on”, communicative (fluent in English) and like problem solving.
Qualifications:
- Engineering degree in chemical or mechanical engineering or similar.
- Knowledge of chemistry, emissions and emissions measurements.

For more information, feel free to contact: Pontus Paulsson / Business Manager
Tel. +46 763 -13 82 29
[email protected]
Comatec Group employs nearly 600 skilled professionals over twenty locations in Finland, Poland, Estonia, Romania and Sweden. We provide engineering design, expert and project management services for the technology industry. We have a vision for future growth and internationalization, and so we constantly seek new experts, especially in mechanical, electrical and automation design and in project management services.
If you are an ambitious professional, who is eager to learn and take responsibility as well as dedicated to contributing to company development, we are waiting to hear from you. Together we will grow, develop and make a difference. Visa mindre

Projektledare och Koordinatorer mot fordonsindustrin

Ansök    Nov 22    Alten Sverige AB    Fordonsingenjör
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin? Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling. VAD ERBJUDER VI?  Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olik... Visa mer
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin?

Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling.

VAD ERBJUDER VI? 

Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olika branscher, har en stor variation av uppdrag, coachande chefer och utbildning via ALTEN Academy vilket gör att det alltid kommer vara möjligt att utvecklas hos oss. Dina önskemål styr din väg framåt.

 

Som konsult får du både en teamkänsla i ditt uppdrag och en riktigt härlig gemenskap på ALTEN. Genom våra interna nätverk såsom Women@ALTEN och ALTEN Sports ges du möjlighet att driva frågor och aktiviteter som just du brinner för. På ALTEN tycker vi det är viktigt med balans mellan arbete och fritid, därför erbjuder vi tre extra lediga dagar per år. Hos oss är du ansluten till kollektivavtal och erbjuds förmåner så som friskvårdsbidrag, tjänstepension och försäkringar.


ÖVERGRIPANDE KUNSKAPER/ERFARENHETER/PERSONLIGA EGENSKAPER:
Erfarenhet från Produktutveckling (Fordon är meriterande).
Har du jobbat med komplettbil/komplettvagn är det meriterande.
Gillar att vara spindeln i nätet.
Erfarenhet från planering, rapportering av projektstatus och teknikmognad i projekt, finansiell uppföljning.
Van att arbeta med olika projektmodeller och agila metoder.
MSc/BSc inom maskinteknik, elektro, Ind E eller liknande.
Du bör vara driven, engagerad, social och service minded.

 

OM ALTEN

ALTEN är ett av Europas största teknik- och IT-konsultföretag med över 57 000 anställda cirka 30 länder. Våra ingenjörer utför komplexa och mycket tekniska projekt genom hela produktutvecklingskedjan hos de främsta företagen inom flera olika branscher såsom Fordon, Försvar & Säkerhet, Energi, Industriell utrustning, Public service samt Life sciences. I Sverige är vi cirka 1300 engagerade medarbetare med 9 kontor i 9 städer - från Lund i söder till Skellefteå i norr.

 

ALTEN har för femte året i rad utsetts till en av Sveriges mest attraktiva arbetsgivare av Karriärföretagen, en utmärkelse för arbetsgivare som erbjuder unika karriär- och utvecklingsmöjligheter.
 

Välkommen in att läsa mer om oss på alten.se Visa mindre

System Safety Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a System Safety Engineer in Steering to strengthen our team in Gothenburg. The Role Responsible for handling System Safety in steering systems, requirement engineering. Know how to work with architecture elements. Good know how of ISO... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a System Safety Engineer in Steering to strengthen our team in Gothenburg.
The Role
Responsible for handling System Safety in steering systems, requirement engineering. Know how to work with architecture elements. Good know how of ISO 26262 for System safety.
This position would be working within Engineering Research and Development area of Tata Technologies and specifically on Vehicle Programs. The fast-paced development provides a challenging environment suited to an engineer who can quickly develop skills in new areas and liaise with and drive other engineers within a multidisciplinary/global team. Our customers expect high standards, and we require staff capable of meeting such demands.
Responsibilities
· System Safety deliverables for different vehicle variants.
· Development of ASIL D requirements according to ISO26262.
· Supplier interaction for correct delivery of content.
· Alignments with testing team for verification of safety requirements.
· System Architect – Defining safety requirements/design at all CF/PF level.
· Supplier acquisition and ESOW support for system safety topics.
· Validate Safety Goals in vehicle fault injection testing.
· Test case reviews system safety requirements.
· Basic electronic design knowledge.
Experience / Knowledge
· Bachelor’s degree in computer science/electrical/mechatronics Engineering.
· Extensive experience in automotive systems.
· Exploratory requirement handling understanding.
· Understanding of ISO26262
· Basic knowhow of CAN/CANoe, CANalyzer and similar tools for the analysis and manipulation of CAN traffic
· Aspice understanding.
· VCC version of Systemite’s System Weaver – CarWeaver
· Have knowledge of TCe (Teamcenter).
· Experience working with CANoe , CANape , Simulink.
· Experience working with diagnostics and good knowledge of UDS.
· Experience in testing on test vehicles.
· Good understanding of system/software testing and methodologies.
· Good understanding of vehicle network communication technologies.
· Good English language skills.
· Swedish Drivers License (B).
· VCC track license T1/T2 is advantage.
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Design Engineer Wiring Harness

Ansök    Nov 16    Integro Consulting AB    Fordonsingenjör
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry. Job description: The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you w... Visa mer
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry.
Job description:
The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you will report to Scrum master and Product Owner.
Experience required:
-Minimum 3 years of experience designing electromechanical components such as harnesses, PCB, busbars, distributions boxes, metallic and plastic fasteners.
-Experience from working within automotive industry/product development systems.
-Experience from packaging work in tight and complex environments using CATIA V5 and/or Creo with harness module/flattening and Teamcenter.
Skills required:
-Skilled in Catia V5 and/or Creo
-Ability to work in agile teams planning the work and estimating own workload.
-Minimum BSc in Electrical or Mechatronical Engineering or equivalent
-Fluent in English both spoken and written
-Excellent communicational skills and ability to work in a global environment
-Teamplayer who easily can collaborate with others.
Additional info:
We schedule interviews on a rolling basis so do not wait until end date. Visa mindre

Technical Lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to work with Functional Safety in Steering to strengthen our team in Gothenburg. The Role Responsible for handling System Safety in steering systems, requirement engineering. Know how to work with architecture element... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to work with Functional Safety in Steering to strengthen our team in Gothenburg.
The Role
Responsible for handling System Safety in steering systems, requirement engineering. Know how to work with architecture elements. Good know how of ISO 26262 for System safety.
This position would be working within Engineering Research and Development area of Tata Technologies and specifically on Vehicle Programs. The fast-paced development provides a challenging environment suited to an engineer who can quickly develop skills in new areas and liaise with and drive other engineers within a multidisciplinary/global team. Our customers expect high standards, and we require staff capable of meeting such demands.
Responsibilities
· System Safety deliverables for different vehicle variants.
· Development of ASIL D requirements according to ISO26262.
· Supplier interaction for correct delivery of content.
· Alignments with testing team for verification of safety requirements.
· System Architect – Defining safety requirements/design at all CF/PF level.
· Supplier acquisition and ESOW support for system safety topics.
· Validate Safety Goals in vehicle fault injection testing.
· Test case reviews system safety requirements.
· Basic electronic design knowledge.
Experience / Knowledge
· Bachelor’s degree in computer science/electrical/mechatronics Engineering.
· Extensive experience in automotive systems.
· Exploratory requirement handling understanding.
· Understanding of ISO26262
· Basic knowhow of CAN/CANoe, CANalyzer and similar tools for the analysis and manipulation of CAN traffic
· Aspice understanding.
· VCC version of Systemite’s System Weaver – CarWeaver
· Have knowledge of TCe (Teamcenter).
· Experience working with CANoe , CANape , Simulink.
· Experience working with diagnostics and good knowledge of UDS.
· Experience in testing on test vehicles.
· Good understanding of system/software testing and methodologies.
· Good understanding of vehicle network communication technologies.
· Good English language skills.
· Swedish Drivers License (B).
· VCC track license T1/T2 is advantage.
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Component Owner of Elecrical Components

Ansök    Nov 16    Integro Consulting AB    Fordonsingenjör
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment. Work Description: Write Technical Regulation according to requirements and lead the testing of the electrical components Follow up the technical development and quality of the component together with the supplier. Provide installation requirements to the team responsible for pac... Visa mer
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment.
Work Description:
Write Technical Regulation according to requirements and lead the testing of the electrical components
Follow up the technical development and quality of the component together with the supplier.
Provide installation requirements to the team responsible for packaging and installation.
Validate documentation relating to the components, according to the system requirements.
Perform the corresponding HW releases according to the project plan and make sure deliveries are on time.
Coordinate overall quality activities for the component and resolve any issues that might appear.
Lead and propose quality and cost improvement actions

Education:
You have a degree in Electronics/Mechatronics or similar
Competences:
At least 3 years’ experience of Product Development preferably in the automotive industry.
Technical experience of Electrical & Electronics Systems
You have experience of coordinating and leading technical project in a global environment
Used to following a process plan within R&D
Skills:
Excellent communicational skills, written and oral
Proactive
Organized and work in a structured way
Open minded and flexible
Creative and a solution finder
Customer focus
You enjoy working in a global environment with people from various countries and cultures.
Driven and good at networking
QDCF
Leadership skills
Customer oriented and with a business mind set Visa mindre

Testingenjör till fordonsektorn

Är du en engagerad testingenjör med passion för fordonsindustrin? Som testingenjör får du en nyckelroll i att säkerställa kvalitet och funktionalitet genom hela testprocessen, från planering till slutrapport! Skicka din ansökan redan idag! OM TJÄNSTEN Vi söker en noggrann och teknikintresserad testingenjör för en spännande tjänst inom fordonsindustrin. Som testingenjör kommer du att ansvara för planering, genomförande, analys och rapportering av funktion... Visa mer
Är du en engagerad testingenjör med passion för fordonsindustrin? Som testingenjör får du en nyckelroll i att säkerställa kvalitet och funktionalitet genom hela testprocessen, från planering till slutrapport! Skicka din ansökan redan idag!

OM TJÄNSTEN
Vi söker en noggrann och teknikintresserad testingenjör för en spännande tjänst inom fordonsindustrin. Som testingenjör kommer du att ansvara för planering, genomförande, analys och rapportering av funktionstester och hållbarhetstester i olika fordonsmiljöer. Din roll är central i att säkerställa att system och komponenter lever upp till höga kvalitetskrav och fungerar optimalt.

Du leder testprojekt där du planerar och förbereder testobjekt i både testceller och fordonsmiljö. Ditt ansvar omfattar allt från att definiera nödvändig instrumentering och mätmetoder till att fastställa testcykler och vilka data som ska registreras. Under testprocessen ansvarar du för att samla in och analysera data, samt dokumentera iakttagelser och felrapporter, som sammanställs i slutrapporter för konstruktörer och projektledning.

Din vardag kommer att vara varierad, med uppgifter som sträcker sig från uppbyggnad av testobjekt i verkstadsmiljö till avancerad dataanalys. Vi söker dig som är analytisk och strukturerad och vill utvecklas inom fordonsindustrin i en roll där du bidrar till säkerhet och kvalitet i alla led.

VI SÖKER DIG SOM
- Har kandidatexamen inom maskinteknik, fordonsingenjörskonst, mekatronik eller motsvarande arbetslivserfarenhet som testingenjör.
- Har goda kunskaper i applikationer såsom ETAS INCA, Python/Matlab och Microsoft Office.
- Är obehindrad i svenska och engelska, då båda språken används dagligen

Det är meriterande om du har
- Erfarenhet av utvecklingstester, mätsystem och testceller
- Kunskap inom styrsystem (t.ex. motorstyrning)

Kunskap kan erhållas genom utbildning, erfarenhet eller att vara självlärd.

För att lyckas i rollen har du följande personliga egenskaper:
- Utåtriktad och initiativtagande
- Målmedveten
- Ansvarstagande

Vår rekryteringsprocess

Denna rekryteringsprocess hanteras av Academic Work och vår kunds önskemål är att alla frågor rörande tjänsten skickas till Academic Work.

Vi tillämpar löpande urval och kommer plocka ner annonsen när tillräckligt många kandidater har nått slutskedet i rekryteringsprocessen. Rekryteringsprocessen innehåller två urvalstest: ett personlighetstest och ett test i kognitiv förmåga. Testerna är ett verktyg för att kunna hitta den kandidat med högst potential för tjänsten samt främja jämlikhet, mångfald och en rättvis rekryteringsprocess. Visa mindre

Design Engineer

Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

NVH Design Engineer developer for Interior Acoustics, Floor & Luggage Compartment 93620
Acoustics, Floor & Luggage Compartment is a group within the department Interior Trim & Systems and the unit Vehicle Tophat of Volvo Cars. The group consists of two separate teams, Acoustics & Floor and Luggage Compartment.

Who we are
We are responsible for developing interior carpets, NVH parts and the Luggage Compartment. Our parts have a very clear customer interface and is something everyone can relate to. We work closely with attributes such as Design, Perceived Quality, NVH, Ergonomics and more in order to meet our premium customer expectations. We aim to grow our Build to Print capabilities within our team and lead in sustainability and weight optimization where we find new opportunities every day. The team have today competence in both GDL (project leading), Design engineering (Catia) and conceptual engineering. The team is responsible from cradle to the grave for all our products.

What´s in it for you
You will learn and discover new organizations and interesting people in Volvo Cars. Our products have a big interface so your network will grow along with getting a more holistic view of complete car development process. You will need to use your technical experience, leadership and people skills to be successful in securing that you and your team meet committed goals. We have many good examples of colleagues who have had excellent personal development and now are a great asset to the company.

You and your skills
We see that you are a curious individual with a genuine interest in products, innovation, design and customer needs.
This role requires you to have great communication skills and fluency in English. 
We see that you are a curios individual with a genuine interest in products, innovation, design and customer needs.
You need to have the capacity to drive several issues simultaneously and work in a structured way. 
You are together with your team accountable for all your deliveries.
You need to be result oriented and flexible with the focus to get the job done.
We hope to spark your interest in CAD engineering parts with strong connection to NVH (Noise, Vibrations & Harshness), an attribute with significant impact to how the end customer experience a vehicle.
You will lead the CAD development of these parts together with our inhouse team, work with suppliers and test engineers to develop new products in form, materials and processes.
To test, evaluate and have a good product knowledge you need to have driver license B.

Meritorious:
· Experience from Carpet, Load floor, NVH, textile products. Development and/or production
· Interior mechanical Design engineering in Catia

Application:
Apply for the position through the given link with your CV and cover letter. Interviews are ongoing and selection is continuous. Please apply at the earliest. Visa mindre

Process engineer

Ansök    Nov 12    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding ... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.

Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.

We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Let's introduce ourselves

At Manufacturing Engineering, we represent the global development for Volvo’s future sustainable manufacturing, by introducing new products and processes globally. We offer you an exciting opportunity in an international and growing company with a great culture and great development opportunities. You will have the opportunity and responsibility to actively contribute to the growth of our business through people. Come join us!

What you'll do

In the Process development team as a process engineer you are leading the development of our future manufacturing and assembly lines producing high voltage traction batteries, electric motors and inverters. You are responsible to assure lean and innovative processes fulfilling the high expectations of our customers. You will have a challenging scope of tasks working with innovative product and process technology in all corners of the world. If this is for you? Don’t wait for it, the time is now!

Your focus will be to define process solutions on station and line level. Your tasks will be to design the process (2D and 3D) integrating equipment and logistic solutions, make time estimations of assemblies to plan and balance the work (man and auto), participant in process fmeas, with the goal to create lean and efficient global solutions. You will work with products requiring several different process technologies such as laser welding, arc welding, friction stir welding, machining, gluing etc.

You will be belonging to the central commodity team which has the responsibility to define process solutions for the product programs globally.

What you'll bring

·         You have a at least a bachelor’s degree in an engineering discipline.
·         You have experience from both product and process development.
·         You are experienced in virtual manufacturing with tools such as Siemens Process simulate, NX design, Teamcenter and Autocad.
·         You have experience from drafting process layouts and designing workstations.
·         You have experience from designing workstations involving different joining methods such as laser welding, arc welding, Friction Stir Welding, glue application.
·         You have experience from working with highly automated processes.

On a personal level
·         You are unafraid to face challenges and you are motivated by developing yourself and the surrounding.
·         You have a good sense of ownership and desire to make a lasting impact.
·         You are tech proficient and positive. Visa mindre

Diagnostic Engineer till industri och fordonsbranschen

Nu söker vi på Academic Work, i samarbete med Aleido, en engagerad Diagnosingenjör som vill vara med och driva utvecklingen av avancerade diagnoslösningar. I denna roll blir du en viktig länk mellan teknik och de människor som använder den, med möjlighet att påverka arbetet inom både fordons- och industrisektorerna. OM TJÄNSTEN Som Diagnosingenjör kommer du att arbeta med att utveckla, implementera och optimera diagnoslösningar. Dina huvudsakliga uppgif... Visa mer
Nu söker vi på Academic Work, i samarbete med Aleido, en engagerad Diagnosingenjör som vill vara med och driva utvecklingen av avancerade diagnoslösningar. I denna roll blir du en viktig länk mellan teknik och de människor som använder den, med möjlighet att påverka arbetet inom både fordons- och industrisektorerna.

OM TJÄNSTEN

Som Diagnosingenjör kommer du att arbeta med att utveckla, implementera och optimera diagnoslösningar. Dina huvudsakliga uppgifter inkluderar att:


* Skapa effektiva felsökningsprocesser och identifiera felkoder och symptom.
* Lösa tekniska utmaningar som rör fordonsflottor eller industrimaskiner.
* Testa och validera elektriska system för att säkerställa en hög kvalitet.


Du arbetar både vid datorn med anpassade programvaror och genom praktiska tester för att verifiera diagnoslösningarna. Rollen innebär att skapa tydliga felsökningsdokumentationer och instruktioner på både svenska och engelska. Du har även möjlighet att samarbeta med tekniska illustratörer för att säkerställa att dokumentationen är enkel att förstå och följa.

Rollen ger dig en chans att fördjupa dina kunskaper inom ny teknik såsom el- och hybriddrivlinor, samt avancerade automationssystem. Du arbetar i nära dialog med kunderna och kan antingen vara på plats hos kunden eller från Aleidos kontor, beroende på projektets behov.

Vad Aleido erbjuder:
Aleido värdesätter en inkluderande arbetsmiljö där samarbete, lärande och nytänkande står i fokus. Här får du:
- Stöttning och resurser för att utvecklas i din roll, samtidigt som du uppmuntras att ta initiativ och driva din egen utveckling.
- En arbetsmiljö som främjar flexibilitet och hållbarhet, med möjlighet till distansarbete och en stark lärandekultur.
- Ett brett nätverk inom olika tekniska branscher där du har möjlighet att påverka både din egen och företagets utveckling.

VI SÖKER DIG SOM
...har erfarenhet av diagnostik och felsökning, gärna inom fordons- eller industrisektorn. Vi tror att du har:
- En teknisk utbildningsbakgrund, exempelvis inom fordonsteknik, mekatronik, maskinteknik eller elektronik.
- Ett stort intresse för teknik och en förmåga att sätta dig in i ny avancerad teknik.
- Erfarenhet från arbete i tunga industrier eller diagnostik av industriella system, vilket är meriterande.
- Förmåga att kommunicera obehindrat på svenska och engelska.

För att lyckas i rollen har du följande personliga egenskaper:
- Förändringsbenägen
- Hjälpsam
- Ansvarstagande

Vår rekryteringsprocess

Denna rekryteringsprocess hanteras av Academic Work och vår kunds önskemål är att alla frågor rörande tjänsten skickas till Academic Work.

Vi tillämpar löpande urval och kommer plocka ner annonsen när tillräckligt många kandidater har nått slutskedet i rekryteringsprocessen. Rekryteringsprocessen innehåller två urvalstest: ett personlighetstest och ett test i kognitiv förmåga. Testerna är ett verktyg för att kunna hitta den kandidat med högst potential för tjänsten samt främja jämlikhet, mångfald och en rättvis rekryteringsprocess.

INFORMATION OM FÖRETAGET
Aleido är ett internationellt företag med lång erfarenhet av att tillhandahålla eftermarknadsinformation och utbildningslösningar för tekniskt avancerade produkter. Företaget verkar inom branscher som fordon, telekom, industri, järnväg och medicinteknik. Med tusen medarbetare i fem länder arbetar de för att göra avancerad teknik lätt att förstå och tillgänglig för användare.
Är du redo att bli en del av Aleidos team och utvecklas som Diagnosingenjör? Sök redan idag och ta steget mot en framtid inom en expansiv och dynamisk teknisk miljö! Visa mindre

Supplier Quality Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Supplier Quality Engineer within software to strengthen our team. The role The team is driving the global supplier base towards premium automotive quality standards and world-class performance. We are resp... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Supplier Quality Engineer within software to strengthen our team.
The role
The team is driving the global supplier base towards premium automotive quality standards and world-class performance. We are responsible for continuously improving the supplier base and the quality of purchased parts. There is now an opportunity to join the SNQ Autonomous, Safety & HMI department as an SQE in Software area.
Responsibilities
As an SQE, you have a full end-to-end ownership of your portfolio.
Your input is key to select the best suitable supplier for a sourcing award for a product.
Your work continues throughout the project to secure a quality assured project launch. After serial production start, you continue to follow and challenge our suppliers through continuous improvement work and zero default mindset.
Risk management skills are core in all three steps: sourcing, project and running production.
Example of topics you will come across is RTS (review of technical specification), Software APQP, Software PPAP, A-Spice assessment or again different kind of audits at supplier. This required you to build and develop a large network made of partners from Suppliers, Buyers, Engineering, Production Plants, Project Stakeholders, Warranty Department, etc.
The job requires frequent travels (up to 2-3 times per month during certain periods)

Knowledge/Experience
Preferred MSc or BSc in Engineering, and 5 years of technical experience needed (extensive experience and strong performance can substitute for academic degree)
Skilled in SW quality assurance, with already good knowledge of best practices of A-Spice standard.
Knowledge of specific standards and tools used in SW areas is a plus such as ISO26262 (Safety), ISO/CEI 15504 (A-Spice), ISO/SAE 21434 (Cybersecurity).
Knowledge in Electronics manufacturing and SMT production line is a plus for this position
Good knowledge and practice of automotive quality standards and tools, such as ISO/TS 16949, APQP & PPAP.
Experience from supplier quality work within automotive business is beneficial
interest in the quality area with a good knowledge of automotive quality standards.
Good English communication skills, both verbally and in writing.
Driving license B.

If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Test Engineer Vehicle - Göteborg

Jobbify är en jobbplattform för vassa kandidater. För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen: Profile Tests and modifies general systems-level software/hardware, specialized utility and/or hardware. Interprets wireless specifications. Designs test plans, scenarios, scripts, or procedures. Documents systems-level defects, using a bug tracking system,... Visa mer
Jobbify är en jobbplattform för vassa kandidater.



För kunds räkning har vi publicerat denna annons, vill du komma i kontakt med den slutgiltiga arbetsgivaren kan du klicka dig vidare till annonsen:

Profile

Tests and modifies general systems-level software/hardware, specialized utility and/or hardware. Interprets wireless specifications. Designs test plans, scenarios, scripts, or procedures. Documents systems-level defects, using a bug tracking system, and report defects to developers. Identifies, analyzes, troubleshoots, and documents problems with program function, output, or content. Develops testing programs that assess effectiveness of a new system or modification of an existing system.

Job Description

• Vehicle Testing – Main Responsible for Open-Loop & Closed-Loop testing in Vehicle for the ADAS Features (AEB/LSS)
o Open Loop – Data Collection (public roads + test track)
o Closed Loop – Sanity, Smoke & Functional testing (NCAP + Requirement based)
o Contribute to Development test requests (ex: verifying functionality / bug)
o Exploratory testing (ex: tests with multiple features interaction)
o Providing Test results summary after Initial analysis and Issue Reporting
• Support in Test Campaigns/Test Expeditions/Customer Demo
• Support in Vehicle Maintenance & Garage activities.
• Supports testing procedures and provides accurate documentations.
• Makes a relevant contribution to the specification of the test requirements for the complete functional chain, sensors, sensor data fusion and driving control function.• • Analyze, standardize, and improve the test approaches, methods, and processes.
• Execute testing and evaluation of various advanced and automated driving functions and development activities (e.g.: Collision Mitigation / Avoidance Systems - Autonomous Emergency Braking (AEB), Lane Departure Warning (LDW), Blind Spot Detection (BSD), Forward Collision Warning (FCW), etc.)
• Vehicle Integration – Bringing up with the vehicle with the correct SW/HW required for the test activity.

Required skills

Experience with ADAS Vehicle testing (AEB/LSS)
Vehicle Testing experience (including ADAS domain)
ECU flashing and data logging
Knowledge of ENCAP Protocols and other NCAP protocols/regulations/ASPICE process
Engineering Degree or relevant experience
Driving License B, with T1 & T2

Good to have:

Knowledge of Vehicle Integration/Bring-up (with correct HW/SW)
Experience from Test Campaigns/Expeditions/Demo
Programming Knowledge skills (ex. Python scripting)

Duration: 20241104 - 20251231 Visa mindre

Motorprov och Fordonselektronik

Ansök    Okt 31    TECHCON Sweden AB    Fordonsingenjör
Arbetsbeskrivning För vårt team inom motorprov och fordonselektronik söker vi en praktisk och teoretisk person som vill arbeta som konsult hos en av våra kunder. Du kommer att arbeta med utveckling och testning av motor- och fordonselektroniksystem, i nära samarbete med både ingenjörer och tekniker. Vi lägger stor vikt vid praktisk erfarenhet och förmåga att lösa komplexa tekniska problem, samt har ett intresse av elektronik och fordon. Ansvarsområden Utfö... Visa mer
Arbetsbeskrivning
För vårt team inom motorprov och fordonselektronik söker vi en praktisk och teoretisk person som vill arbeta som konsult hos en av våra kunder. Du kommer att arbeta med utveckling och testning av motor- och fordonselektroniksystem, i nära samarbete med både ingenjörer och tekniker. Vi lägger stor vikt vid praktisk erfarenhet och förmåga att lösa komplexa tekniska problem, samt har ett intresse av elektronik och fordon.
Ansvarsområden Utföra motorprov och diagnostik av olika fordonsystem.
Montering och kalibrering av elektroniska komponenter och system.
Delta i utvecklingen av nya testprotokoll och förbättra befintliga.
Analysera och dokumentera testdata för att identifiera och lösa problem.
Samarbeta med tvärfunktionella team för att säkerställa projektets mål och deadlines.
Hålla sig uppdaterad om de senaste branschtrenderna och teknologierna.
Färdigheter och kvalifikationer Examen inom fordonsteknik, elektroteknik eller liknande.
Meriterande är att ha arbetat meddiagnostik och fordonselektronik alternativt en ingenjörsexamen inom relevant område.
Minst 3 års erfarenhet av arbete med motorprov eller fordonselektronik.
Flytande i svenska och engelska, både i tal och skrift.
Starka analytiska färdigheter och förmåga att lösa komplexa problem.
God kommunikationsförmåga och förmåga att arbeta i team.
Fördelar med att arbeta hos oss Konkurrenskraftig lön och förmånspaket.
Goda möjligheter till yrkesmässig och personlig utveckling.
Generöst friskvårdsbidrag om 5.000kr.
Tillgång till företagets mekaniska verkstad med bland annat 3D-skrivare, svets, svarv, fräs med mer.
Utbildningar och stöd från erfarna kollegor i branschen.
Hur du ansöker
Intresserade kandidater inbjuds att skicka in sitt CV via ansök-knappen nedan.
About Us:
Techcon är ett konsult- och produktbolag.Vår konsultverksamhet är bred inom området motorutveckling och testning medallt från operatörer, montörer till ingenjörer. Visa mindre

Electromechanical Design Engineer

Ansök    Nov 4    Incontext AB    Fordonsingenjör
At inContext we believe that passion creates an added value. For us, that passion is co-creating the latest technology with amazing people. We love developing both. Electromechanical Designer Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical de... Visa mer
At inContext we believe that passion creates an added value.
For us, that passion is co-creating the latest technology with amazing people.

We love developing both.

Electromechanical Designer

Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical designer to take ownership of cutting-edge projects that drive change in automotive technology.

What You’ll Do:

• Design Innovative Solutions: Take full responsibility for developing high-quality electromechanical systems that meet technical and project requirements.
• Tackle Diverse Projects: Engage in a variety of exciting challenges, from electrical installations to 3D routing, constantly expanding your expertise.
• Work on Advanced Automotive Solutions: Engage in cutting-edge electromechanical projects that drive the future of mobility.
• Collaborate Across Teams: Partner with internal teams, clients, and stakeholders to ensure seamless communication and project alignment.
• Solve Technical Challenges: Dive into complex problems, conducting research and consulting experts to find innovative, practical solutions.
• Lead Presentations & Updates: Share your vision in team meetings and client discussions, articulating technical concepts with clarity and confidence.
• Consulting Flexibility: Enjoy working on a variety of projects, gaining experience across different products and technologies while adapting to dynamic client needs.

What You Bring:

• About 2 years of experience in electromechanical design within a European organization, ideally within the automotive industry.
• Proficiency with 3D design programs such as Catia, Creo, NX or similar
• Expertise in product development, especially in R&D settings.
• Proven ability to own the entire design process from research to delivery.
• Strong verbal and written communication skills
• A proactive mindset that drives you to find the best solutions and manage projects autonomously.

What do we offer?

• Flexible Work Options: We support a balanced work-life approach, giving you the flexibility to manage your time and projects effectively.
• Social & Knowledge Sharing: Take part in regular social activities and continuous knowledge-sharing sessions, helping you connect with colleagues and grow professionally.
• Flat and Open Culture: Enjoy being part of a flat organization with open communication, honest relations and where everyone’s voice is heard.
• Innovate in Automotive: Work on breakthrough technologies that are shaping the future of mobility and electrification.
• Personal development: challenging tasks and a possibility to influence the company
• Make a Difference: Your designs will play a key role in shaping the future of automotive electrification, contributing to a more sustainable and innovative mobility landscape.
• Varied Project Experience: Broaden your expertise by working with different clients, industries, and cutting-edge products.

If you have any questions or concerns, please do not hesitate to contact us.

Welcome with your application! Visa mindre

Test Engineer Vehicle - Göteborg

Profile Tests and modifies general systems-level software/hardware, specialized utility and/or hardware. Interprets wireless specifications. Designs test plans, scenarios, scripts, or procedures. Documents systems-level defects, using a bug tracking system, and report defects to developers. Identifies, analyzes, troubleshoots, and documents problems with program function, output, or content. Develops testing programs that assess effectiveness of a new syst... Visa mer
Profile
Tests and modifies general systems-level software/hardware, specialized utility and/or hardware. Interprets wireless specifications. Designs test plans, scenarios, scripts, or procedures. Documents systems-level defects, using a bug tracking system, and report defects to developers. Identifies, analyzes, troubleshoots, and documents problems with program function, output, or content. Develops testing programs that assess effectiveness of a new system or modification of an existing system.
Job Description• Vehicle Testing – Main Responsible for Open-Loop & Closed-Loop testing in Vehicle for the ADAS Features (AEB/LSS) o Open Loop – Data Collection (public roads + test track) o Closed Loop – Sanity, Smoke & Functional testing (NCAP + Requirement based) o Contribute to Development test requests (ex: verifying functionality / bug) o Exploratory testing (ex: tests with multiple features interaction) o Providing Test results summary after Initial analysis and Issue Reporting• Support in Test Campaigns/Test Expeditions/Customer Demo• Support in Vehicle Maintenance & Garage activities.• Supports testing procedures and provides accurate documentations.• Makes a relevant contribution to the specification of the test requirements for the complete functional chain, sensors, sensor data fusion and driving control function.• •Analyze, standardize, and improve the test approaches, methods, and processes.• Execute testing and evaluation of various advanced and automated driving functions and development activities (e.g.: Collision Mitigation / Avoidance Systems - Autonomous Emergency Braking (AEB), Lane Departure Warning (LDW), Blind Spot Detection (BSD), Forward Collision Warning (FCW), etc.)• Vehicle Integration – Bringing up with the vehicle with the correct SW/HW required for the test activity.
Required skills
Experience with ADAS Vehicle testing (AEB/LSS)Vehicle Testing experience (including ADAS domain)ECU flashing and data loggingKnowledge of ENCAP Protocols and other NCAP protocols/regulations/ASPICE processEngineering Degree or relevant experienceDriving License B, with T1 & T2Good to have:Knowledge of Vehicle Integration/Bring-up (with correct HW/SW)Experience from Test Campaigns/Expeditions/DemoProgramming Knowledge skills (ex. Python scripting)
Duration:20241104 -20251231 Visa mindre

Functional safety engineer

Ansök    Okt 30    Fev Sverige AB    Fordonsingenjör
What we do - And why! FEV Sverige AB is a member of the FEV Group and active on the Scandinavian market since 2006. With more than 7500 employees world-wide, we develop revolutionary and efficient drive systems as well as solutions for energy storage. In short, FEV can develop a complete vehicle from concept to production. FEV Sweden represent the competencies of the FEV Group on the northern European market and ensure that our Scandinavian customers have ... Visa mer
What we do - And why!
FEV Sverige AB is a member of the FEV Group and active on the Scandinavian market since 2006. With more than 7500 employees world-wide, we develop revolutionary and efficient drive systems as well as solutions for energy storage.
In short, FEV can develop a complete vehicle from concept to production. FEV Sweden represent the competencies of the FEV Group on the northern European market and ensure that our Scandinavian customers have local access to the global competence of the FEV.


Tasks
Development and application of the current and future requirements for Functional Safety (ISO 26262) for ePowertrain systems, Power Electronics, battery, chassis and their controls
Ensure compliance with the relevant safety standards
Create/review & maintain item definition, hazard analysis and risk assessment
Develop/review Functional Safety concept & Technical safety concept
Analyse and define Safety requirements (Functional Safety requirements and Technical safety requirements)
Conduct Safety analyses (FTA, FMEA, HAZOP)
Leading technical discussions with suppliers & customers on Functional Safety
Support Functional Safety audits and assessments
Support Functional Safety manager in development of safety plan and safety case



Qualification
Bachelor's or Master's degree in electrical, mechatronic, vehicle engineering, computer science, or a related field
4 – 6 years of industrial experience within Functional Safety
Experience with application of ISO26262 & entire safety lifecycle
Experience with working on ASIL C & ASIL D applications
Hands on experience with FTA, HARA and Safety Concepts
Strong system thinker & knowledge of powertrain systems, propulsion systems, hybrid & electric vehicles
Demonstrated ability in interpreting and assessing complex vehicle systems and architectures regarding safety is required
Ability to plan and manage your time, prioritise several tasks in a timely manner with the ability to communicate and work with others
Fluent in English is mandatory
Swedish language and driving license B are meritorious



What we offer:
Access to the forefront of technology at every automotive manufacturer in the world through our international projects
An open and encouraging workplace environment to grow in, along with a wide variety of challenging and interesting global projects
A wide array of technical areas that offer development opportunities
An entrepreneurial and enthusiastic team, focused on the future and new (business) ideas


If you are interested in this position, send your CV and cover letter to [email protected] with the title "Job Application for Functional safety Engineer".
Please note: If the title is not correct, your email will not be visible for the recruiters due to email filtering system. We look forward to hearing from you! Visa mindre

Functional Safety Manager

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Functional Safety Manager to strengthen our team in Gothenburg. The role The ideal Functional Safety Manager you will be part of our conversion system team focusing mainly on the functional safety work products of DC/DC converters &... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Functional Safety Manager to strengthen our team in Gothenburg.
The role
The ideal Functional Safety Manager you will be part of our conversion system team focusing mainly on the functional safety work products of DC/DC converters & AC/DC converters (known as onboard charger).
Responsibilities
- Working with all the relevant ISO 26262 parts which is must qualification to perform within this role
- Working with automotive systems up to ASIL C
- Working with automotive systems complete product development life cycle
- Strong first principles design approach in power electronics domain
- Working with DC/DC, AC/DC or DC/AC converters
- Working with cross functional teams & leading the functional safety discussions
Experience / Knowledge
- Analyse the incoming functional safety requirements
- Perform the technical safety concept & FTA (fault tree analysis)
- Define the technical safety requirements that goes into HW & SW design
- Review & perform the FMEA & DFA (dependant failure analysis)
- Review & perform the HW metrics / FMEDA
- Support our test engineers with the test case specification reviews for functional safety validation
- Review of safety verification & validation reports
- Prepare the Safety Case with all the relevant documentation
- Support the System & HW designers within & outside Power Electronics department related to FuSa design of power conversion products
If you are passionate about bringing innovation to the projects you work on then we would love to hear from you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Solutions Architect to Husqvarna Group

We are seeking a dedicated and experienced Solutions Architect for a challenging consulting assignment with Husqvarna! In this role, you will hold a key position in Husqvarna’s PLM program, aiming to achieve the highest level of excellence within the digital value chain. OM TJÄNSTEN As a PLM Business Architect, you will play a central role in migrating data from legacy data structures to a more centralized solution using TeamCenter as the core applicatio... Visa mer
We are seeking a dedicated and experienced Solutions Architect for a challenging consulting assignment with Husqvarna! In this role, you will hold a key position in Husqvarna’s PLM program, aiming to achieve the highest level of excellence within the digital value chain.

OM TJÄNSTEN
As a PLM Business Architect, you will play a central role in migrating data from legacy data structures to a more centralized solution using TeamCenter as the core application. Focusing on Parts, BOM, and CAD, you will support data migration across business units. Your work will be guided by a project organization comprising project managers and other architects, while you will also work closely with a dedicated business representative within the operational units.

Your responsibilities include:


* Supporting the change management efforts within the development organization.
* Working on data migration from older systems to new, centralized structures.
* Collaborating with project managers to ensure smooth and accurate migration processes.
* Documenting and preparing testing materials, as well as independently creating and executing test cases.


VI SÖKER DIG SOM
- Has a background in PLM and IT, with a solid understanding of industrial products and their Part and BOM logic, potentially from a role in R&D or IT.
- Your ability to understand and document workflows, as well as identify and develop process improvements, is crucial for long-term success in this role.

To succeed in this role, we would like you to have:


* Experience with PLM or PDM systems (e.g., Parts and BOM).
* Familiarity with industrial workflows and IT projects.
* Strong ability to document, analyze, and evaluate data.
* Availability for regular travel, both within Sweden and internationally.


It’s a plus if you:


* Have worked as an engineer in a large industrial company or have experience in similar industrial environments.
* Have a foundational knowledge of CAD.


Scope and Start Date

This is a long-term assignment starting as soon as possible, with planning extending at least through next year and potentially lasting until 2026. The work location is flexible; you may choose to be based in Jonsered - Gothenburg or Husqvarna - Jönköping. However, regular travel to these locations may be required depending on project needs.

Personal Qualities Required for Success:


* Communicative
* Flexible
* Responsible/Structured


Our recruitment process

This recruitment process is handled by Academic Work and it is our client’s wish that all questions regarding the position is directed to Academic Work.

Our selection process is continuous and the advert may close before the recruitment process is completed if we have moved forward to the next phase. The process includes two tests: one personality test and one cognitive test. The tests are tools to find the right talent for the right position, to enable equality, diversity, and a fair process.

INFORMATION OM FÖRETAGET
Husqvarna Group with over 330 years of innovation, Husqvarna Group delivers forestry, park, and garden products for professional users. The company combines high performance, user-friendliness, and safety, offering a broad and expanding range of products and accessories—from chainsaws and cutting machines to robotic lawnmowers. Visa mindre

System Designer

Ansök    Okt 28    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Mpya Sci & Tech is built by and for engineers. We have created a company where you as an Mployee always are in focus. In everything we do, we strive to create a high degree of involvement and to be sensitive to our Mployees ideas about their future work and careers, not by empty words, but thru real actions. Building a strong collective culture with favorable conditions for you as an employee and finding the assignment where you can be passionate and develop yourself with balance in life. That is how we do it!

We are now looking for a System Designer for one of our clients here in Gothenburg.

Job description:

• Design multiple levels system following extraction of customer functionalities from Car Conectivity Consortium and internal use cases from stakeholders, including product capabilities, product functionalities and software components, that also support scalibility, maintainability and testability for each integration levels
• Work with UX/UI teams and developers to define a balance solution for both customer centric experience and certifications
• Work with suppliers of peripherals ECUs to define requirements needed for the solutions
• Documenting requirements of the release software solutions including both descriptions and test cases management

Required skills:

• Having good knowledge about AUTOSAR, CAN/CANFD/LIN signal databases and application development in AUTOSAR
• Worked as system/software architecture design
• Work experience with embedded systems
• Excellent skills of using UML for software design
• Fluent in English

Nice to have is knowledge of:

• Linux based application development
• HMI/Android platforms
• Realtime OS
• Software testing skills
• Drivers license B

Who We Are

At Mpya Sci & Tech, we believe in a sustainable work life where we work together to create a culture in which you can be curious, inclusive, and authentic. We believe that true talent lies in individuals who are open to continuous development throughout their lives. With extensive industry experience and deep knowledge, we’re creating a forward-leaning, innovative company—our way.

Application

Does this sound like the opportunity you’ve been waiting for? Please go ahead and apply! Visa mindre

Calibration Engineer

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engi... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

AVL Powertrain Engineering in Sweden is now looking to recruit a new Calibration Engineer to support our Automotive OEM customers in engine and vehicle level calibration for a diverse range of heavy-duty applications, including vehicles, construction equipment, non-road & marine applications, in the Gothenburg area.
As a consultant company we value your personal skills highly. Being professional is key and you always act upon the best interest of the company as an AVL ambassador towards our customers. 

* You will work in the development of complex and focus on the development, calibration and validation of Performance, Emissions or OBD functions
* You will be based mainly onsite at the customer premises, working in their projects

You should have experience from Calibration of heavy-duty engines. We think that you have a BSc or MSc degree in Mechanical/Automotive engineering or equivalent. You are a strong communicator with great networking skills, you are solution focused, eager to learn new skills and driven by self-development. 

* 5 plus years of experience in calibration, development or testing of heavy-duty diesel engines
* Calibration of engine control units (ECU) in development and serial projects at customer setting for Performance, Emissions or OBD
* Understanding new regulations and implementing requirements of a project from concept through serial production 
* Planning, execution and evaluation of stationary and dynamic calibration in engine test benches
* Optimization and testing under various ambient conditions both in facility and in territory 
* Analysis of results, preparation of reports and presentation with recommendations for customer 
* Experience in project planning, co-ordination, and delivery
* Supporting homologation and production start
* Good working knowledge of calibration tools (e.g. ATI VISION, INCA) 
* Knowledge of AVL tools - Cameo, Creta and Concerto
* Very good social and communication skills in English (Swedish is meritorious)
* Working knowledge of Matlab, Simulink or Python 
* Driver’s license B (E and/or C meritorious)
* Willingness to travel Visa mindre

Embedded software engineer

Ansök    Okt 25    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Are you passionate about science and technology? Do you want to work in a company where you can actively contribute to development?

Then we’d like you to take a closer look here!

Mpya Sci & Tech is built by engineers, for engineers. We’ve created a company where our employees are always the focus. In everything we do, we strive to foster high engagement and be attentive to our employees’ ideas about their work and career paths. Together, we’re building a strong, inclusive, and curious culture with favorable conditions for you as an employee. We want you to find an assignment where you can feel passionate and grow, with a balanced life.

Right now, we’re looking for Embedded Software Developers for the Automotive industry.

We’re looking for candidates who meet the following requirements:

• At least six years of experience working as an embedded software engineer.
• Strong knowledge of the C programming language (additional skills are a plus).
• Proficiency in Matlab/Simulink.
• B-level driver’s license (passenger car).
• Previous experience in the Automotive industry.
• Fluency in English (Swedish proficiency is highly meritorious).

As an employee, we believe you possess strong communication skills and value building relationships with both customers and colleagues. You’re organized, positive, and able to work independently or as part of a team, taking initiative as needed.

Who We Are

At Mpya Sci & Tech, we believe in a sustainable work life where we work together to create a culture in which you can be curious, inclusive, and authentic. We believe that true talent lies in individuals who are open to continuous development throughout their lives. With extensive industry experience and deep knowledge, we’re creating a forward-leaning, innovative company—our way.

Application

Does this sound like the opportunity you’ve been waiting for? Please go ahead and apply! Visa mindre

Projektledare och Koordinatorer mot fordonsindustrin

Ansök    Okt 24    Alten Sverige AB    Fordonsingenjör
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin? Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling. VAD ERBJUDER VI?  Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olik... Visa mer
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin?

Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling.

VAD ERBJUDER VI? 

Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olika branscher, har en stor variation av uppdrag, coachande chefer och utbildning via ALTEN Academy vilket gör att det alltid kommer vara möjligt att utvecklas hos oss. Dina önskemål styr din väg framåt.  

 

Som konsult får du både en teamkänsla i ditt uppdrag och en riktigt härlig gemenskap på ALTEN. Genom våra interna nätverk såsom Women@ALTEN och ALTEN Sports ges du möjlighet att driva frågor och aktiviteter som just du brinner för. På ALTEN tycker vi det är viktigt med balans mellan arbete och fritid, därför erbjuder vi tre extra lediga dagar per år. Hos oss är du ansluten till kollektivavtal och erbjuds förmåner så som friskvårdsbidrag, tjänstepension och försäkringar.  


ÖVERGRIPANDE KUNSKAPER/ERFARENHETER/PERSONLIGA EGENSKAPER:
Erfarenhet från Produktutveckling (Fordon är meriterande).
Har du jobbat med komplettbil/komplettvagn är det meriterande.
Gillar att vara spindeln i nätet.
Erfarenhet från planering, rapportering av projektstatus och teknikmognad i projekt, finansiell uppföljning.
Van att arbeta med olika projektmodeller och agila metoder.
MSc/BSc inom maskinteknik, elektro, Ind E eller liknande.
Du bör vara driven, engagerad, social och service minded.

OM ALTEN

ALTEN är ett av Europas största konsultbolag inom teknik, IT och Life Sciences med över 54 000 anställda i fler än 30 länder. Vi är en global aktör med lokal närvaro, med 1400 engagerade kollegor från Lund i söder till Skellefteå i norr. Våra ingenjörer utför komplexa och mycket tekniska projekt genom hela produktutvecklingskedjan hos de främsta företagen inom flera olika branscher såsom Fordon, Flyg & Försvar, Energi, Industri, Offentlig sektor och Life Sciences.

 

ALTEN har i fyra år i följd utsetts till en av Sveriges mest attraktiva arbetsgivare av Karriärföretagen, en utmärkelse för arbetsgivare som erbjuder unika karriär- och utvecklingsmöjligheter. Visa mindre

Design Engineer

Ansök    Okt 23    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

NVH Design Engineer developer for Interior Acoustics, Floor & Luggage Compartment 93620
Acoustics, Floor & Luggage Compartment is a group within the department Interior Trim & Systems and the unit Vehicle Tophat of Volvo Cars. The group consists of two separate teams, Acoustics & Floor and Luggage Compartment.

Who we are
We are responsible for developing interior carpets, NVH parts and the Luggage Compartment. Our parts have a very clear customer interface and is something everyone can relate to. We work closely with attributes such as Design, Perceived Quality, NVH, Ergonomics and more in order to meet our premium customer expectations. We aim to grow our Build to Print capabilities within our team and lead in sustainability and weight optimization where we find new opportunities every day. The team have today competence in both GDL (project leading), Design engineering (Catia) and conceptual engineering. The team is responsible from cradle to the grave for all our products.

What´s in it for you
You will learn and discover new organizations and interesting people in Volvo Cars. Our products have a big interface so your network will grow along with getting a more holistic view of complete car development process. You will need to use your technical experience, leadership and people skills to be successful in securing that you and your team meet committed goals. We have many good examples of colleagues who have had excellent personal development and now are a great asset to the company.

You and your skills
We see that you are a curious individual with a genuine interest in products, innovation, design and customer needs.
This role requires you to have great communication skills and fluency in English. 
We see that you are a curios individual with a genuine interest in products, innovation, design and customer needs.
You need to have the capacity to drive several issues simultaneously and work in a structured way. 
You are together with your team accountable for all your deliveries.
You need to be result oriented and flexible with the focus to get the job done.
We hope to spark your interest in CAD engineering parts with strong connection to NVH (Noise, Vibrations & Harshness), an attribute with significant impact to how the end customer experience a vehicle.
You will lead the CAD development of these parts together with our inhouse team, work with suppliers and test engineers to develop new products in form, materials and processes.
To test, evaluate and have a good product knowledge you need to have driver license B.

Meritorious:
· Experience from Carpet, Load floor, NVH, textile products. Development and/or production
· Interior mechanical Design engineering in Catia

Application:
Apply for the position through the given link with your CV and cover letter. Interviews are ongoing and selection is continuous. Please apply at the earliest. Visa mindre

Functional Safety Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Functional Safety Engineer to strengthen our team in Gothenburg. The role This role is for supporting the Inhouse software development of Battery Management system's Basic Software Responsibilities Take part in developing and mainta... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Functional Safety Engineer to strengthen our team in Gothenburg.
The role
This role is for supporting the Inhouse software development of Battery Management system's Basic Software
Responsibilities
Take part in developing and maintaining the Project Safety Plan
Review Technical Safety Requirement and Support in Deriving the SW safety requirements to Autosar BSW.
Responsible to Create & Maintain the Software Verification Strategy for BSW.
Lead the Software safety analysis(FTA /FMEA) and provide feedback to the relevant stakeholders.
Track all the Safety activities/Artefacts to closure as per ISO26262-Part6.
Review of Safety Work products related to BSW.
Create/Update BSW Safety case and release for production.
Be the point of contact for All the safety related activities.

Experience/knowledge
Masters/ bachelor’s degree in computer science/electronics/electrical engineering
Proven prior work experience in Functional safety engineering. (Experience in ISO2622- Part6 is a plus.)
Experience in the multicore Autosar architecture-based SW development.
Good understanding of the SW testing methodologies-
Experience & understanding of product development cycle in Automotive.
Experience in BSW/Electric Propulsion domain is a plus.
Should be able to guide the team with respect to Functional safety process and work products
Ability to independently Put together a plan, conduct and follow-up towards the work objective.
Good Communication skills (English Spoken and written)& team Player skills.


Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Test & Service Engineer till företag inom fordonsindustrin!

Ansök    Okt 10    Friday Väst AB    Fordonsingenjör
För kunds räkning söker vi nu en Test & Service Engineer som ska arbeta med motorutveckling på ett globalt fordonsbolag i Göteborg. Är du en ingenjör med stort intresse för motorer är detta en perfekt möjlighet för dig. Om rollen: Som Test- och Serviceingenjör kommer du att arbeta med motorutveckling och ingå i det så kallade Emissionsteamet, som består av fyra personer. Tillsammans med ditt team kommer du att utvärdera och testa motorerna efter kalibreri... Visa mer
För kunds räkning söker vi nu en Test & Service Engineer som ska arbeta med motorutveckling på ett globalt fordonsbolag i Göteborg. Är du en ingenjör med stort intresse för motorer är detta en perfekt möjlighet för dig.

Om rollen:
Som Test- och Serviceingenjör kommer du att arbeta med motorutveckling och ingå i det så kallade Emissionsteamet, som består av fyra personer. Tillsammans med ditt team kommer du att utvärdera och testa motorerna efter kalibrering för att säkerställa att allt fungerar som det ska. Du kommer också att samarbeta nära med serviceteamet, vilket innebär att du får arbeta praktiskt och delta i själva monteringen av utrustningen. För den här rollen krävs det därför att du är en händig och praktiskt lagd person som inte tvekar att ta i och smutsa ned händerna.



Då teamet är relativt litet är det viktigt att du är en person som ser vad som behövs göra, kan tänka sig ta ledarpinnen i olika situationer och vågar säga vad man tycker vid möten.

Vi söker dig som:
Har en eftergymnasial utbildning inom elektronik, mekatronik, sjöingenjör
Har du kunskap av gaser är detta meriterande
Har du erfarenhet av mekaniskt arbete/något praktiskt hobby är det meriterande.
Talar och skriver obehindrat på svenska då språket används internt


Vidare kommer stort vikt läggas vid personlig lämplighet. För att du skall passa i rollen som Test & Service Engineer krävs det att du som person är konsultmässig, driven och nyfiken. Rollen kräver även att du är flexibel och har lätt för att samarbeta med olika personer i olika konstellationer. Vidare behöver du även vara kommunikativ och anpassa din kommunikation efter mottagaren.

OM ANSTÄLLNINGEN:
Detta är ett konsultuppdrag vilket betyder att du kommer vara anställd av oss på Friday med ambitionen om en överrekrytering till kunden efter 12 månader.



ÖVRIG INFO:
Omfattning: Heltid
Start: Snarast med hänsyn till uppsägningstid
Placering: Göteborg
Rekryteringsansvarig: Stina Högström


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen.

OM FRIDAY:
Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter.

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik. Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Wiring & Harness Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Wiring & Harness Engineer to strengthen our team in Gothenburg. Responsibilities: Develop and document wiring harness and power cable components (wires, cables, connectors, passives, brackets, and cable channels). Develop wiring and... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Wiring & Harness Engineer to strengthen our team in Gothenburg.
Responsibilities:
Develop and document wiring harness and power cable components (wires, cables, connectors, passives, brackets, and cable channels).
Develop wiring and harnesses based on received requirements and using CAD tools.
Design technical solutions, identify improvements, and propose new technical solutions.
Make decisions on small and large adjustments and propose new technical solutions. Responsibility for the wiring harness product structure.
Control technical release.

Knowledge/Experience:
Bachelor's degree in Electronics or equal.
Experience of automotive projects in related areas.
Business English in written and spoken.
Manage global suppliers.
Transparent in communication and reporting.

If you are passionate about bringing innovation to the projects you work on then we would love
to hear from you. Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Teknisk Senior Projektledare -Fordon

Ansök    Okt 15    A-Search AB    Fordonsingenjör
Om uppdraget: Vi söker en teknisk projektledare för ett konsultuppdrag inom fordonsförvaltning. Rollen innebär att hantera avtalsuppföljning och underhåll av spårbundna fordon under en tidsbegränsad period. Fokus ligger på uppföljning av leverantörsavtal, inklusive avvikelsehantering, kostnadsreglering och förändringar av underhållsintervall. Projektet omfattar högvärdeskomponenter (HVK) och syftar till att säkerställa att leveranser sker enligt avtal och... Visa mer
Om uppdraget:

Vi söker en teknisk projektledare för ett konsultuppdrag inom fordonsförvaltning. Rollen innebär att hantera avtalsuppföljning och underhåll av spårbundna fordon under en tidsbegränsad period. Fokus ligger på uppföljning av leverantörsavtal, inklusive avvikelsehantering, kostnadsreglering och förändringar av underhållsintervall. Projektet omfattar högvärdeskomponenter (HVK) och syftar till att säkerställa att leveranser sker enligt avtal och upparbetade planer.

Arbetsbeskrivning:

Följa upp leverantörsavtal för underhåll av tågfordon (X11-14, Y31, X5*, X61).
Hantera administrativ och ekonomisk uppföljning samt säkerställa spårbarhet av processerna.
Samverka med interna och externa intressenter.
Medverka vid förändringar av underhållsintervall och processförbättringar.


Uppdragsperiod: Göteborg. Start omgående, med slut i november 2025. Möjlighet till förlängning finns.

Placeringsort: Viss flexibilitet för distansarbete, men tjänsten kräver också resor och arbete på plats.

Kravprofil:

Dokumenterad erfarenhet av teknisk dokumentation och underhåll av spårbundna fordon.
Erfarenhet av avtalsuppföljning och administrativ förmåga.
Förmåga att genomföra ekonomiska analyser och budgetuppföljningar.
Stark kommunikationsförmåga för samarbete med olika intressenter.
Språkkunskaper i svenska och engelska, både i tal och skrift.


Meriterande:

Erfarenhet av tågfordonstyper som Itino Y31, X61 Coradia och X5* Regina.
Erfarenhet av riskhantering och förändringsledning inom organisationer.


Tidsplan och omfattning:

Startdatum: Omgående
Slutdatum: 30 november 2025
Möjlighet till förlängning baserat på projektets utveckling.
Omfattning: Heltid, 40 timmar per vecka.


Ansökan: Välkommen med din ansökan! Vi intervjuar löpande så skicka gärna din ansökan redan idag. Frågor om tjänsten besvaras av Ann Winsborn, [email protected] Visa mindre

Manufacturing Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit Manufacturing Engineers in Machining The role In this role you will be an integral part of the Manufacturing Engineering Casting and stamping organization with the task to design new High Pressure Die Castin... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit Manufacturing Engineers in Machining
The role
In this role you will be an integral part of the Manufacturing Engineering Casting and stamping organization with the task to design new High Pressure Die Casting Lines, Machining lines and Facilities. The team tasks include specifying and laying out new Equipment, Die Casting lines and machining lines as well as supporting product development.
The Manufacturing engineer is reporting to the Area leader and is the ME stakeholder in the product projects, supporting the successful release of new products for the assigned area. This is done by communicating and verifying ME demands, making product feasibility studies and providing constructive product feedback to the R&D department.
Responsibilities
• ME representative in the product Engineering meetings
• Supporting the product interface deliveries for the project
• Own assigned items in the Team Backlog(s)
• Responsible for updating the Area leader with assigned deliveries in the project
• Participate in all necessary risk analysis, FMEA’s and documentation of Lessons learned.
• Support the project hand over to the plant
• Drive assigned tasks towards agreed manufacturing targets
• Responsible for updating status to Area leader in front of IE#/Gateway/Milestone
• Responsible for actively networking and for collaboration with other manufacturing engineers to improve commonality, WoW and my profession
• Provide support to RFQ preparation work within my area of responsibility
• Participate in design review meetings with suppliers
Requirements
• Mechanical Engineering degree.
• Experience from Product development positions.
• Experience from CAM simulation, preferably in NX CAM.
• Experience from working with CNC machining.
• Experience in lean manufacturing.
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Projektledare och Koordinatorer mot fordonsindustrin

Ansök    Okt 2    Alten Sverige AB    Fordonsingenjör
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin? Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling. VAD ERBJUDER VI?  Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olik... Visa mer
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin?

Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling.

VAD ERBJUDER VI? 

Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olika branscher, har en stor variation av uppdrag, coachande chefer och utbildning via ALTEN Academy vilket gör att det alltid kommer vara möjligt att utvecklas hos oss. Dina önskemål styr din väg framåt.  

 

Som konsult får du både en teamkänsla i ditt uppdrag och en riktigt härlig gemenskap på ALTEN. Genom våra interna nätverk såsom Women@ALTEN och ALTEN Sports ges du möjlighet att driva frågor och aktiviteter som just du brinner för. På ALTEN tycker vi det är viktigt med balans mellan arbete och fritid, därför erbjuder vi tre extra lediga dagar per år. Hos oss är du ansluten till kollektivavtal och erbjuds förmåner så som friskvårdsbidrag, tjänstepension och försäkringar.  


ÖVERGRIPANDE KUNSKAPER/ERFARENHETER/PERSONLIGA EGENSKAPER:
Erfarenhet från Produktutveckling (Fordon är meriterande).
Har du jobbat med komplettbil/komplettvagn är det meriterande.
Gillar att vara spindeln i nätet.
Erfarenhet från planering, rapportering av projektstatus och teknikmognad i projekt, finansiell uppföljning.
Van att arbeta med olika projektmodeller och agila metoder.
MSc/BSc inom maskinteknik, elektro, Ind E eller liknande.
Du bör vara driven, engagerad, social och service minded.

OM ALTEN

ALTEN är ett av Europas största konsultbolag inom teknik, IT och Life Sciences med över 54 000 anställda i fler än 30 länder. Vi är en global aktör med lokal närvaro, med 1400 engagerade kollegor från Lund i söder till Skellefteå i norr. Våra ingenjörer utför komplexa och mycket tekniska projekt genom hela produktutvecklingskedjan hos de främsta företagen inom flera olika branscher såsom Fordon, Flyg & Försvar, Energi, Industri, Offentlig sektor och Life Sciences.

 

ALTEN har i fyra år i följd utsetts till en av Sveriges mest attraktiva arbetsgivare av Karriärföretagen, en utmärkelse för arbetsgivare som erbjuder unika karriär- och utvecklingsmöjligheter. Visa mindre

Senior Feature Leader in Transport Effectiveness

. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.  What you will do  In this role, you will be responsible for leading the transport effectiveness customer feature area. Your main tasks include defining requirements ... Visa mer
.

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. 
What you will do
 In this role, you will be responsible for leading the transport effectiveness customer feature area. Your main tasks include defining requirements and verification methods, translating product targets into quantifiable requirements, creating verification and validation plans, and driving feature development across the organization. You will also secure, maintain, and develop feature knowledge over time for different brands, segments, markets, and applications. Additionally, you will synchronize the feature between projects and ensure accurate translation of customer usage and requirements by continuously updating test methods and design requirements.
You will contribute to feature development plans, provide input to feature roadmaps, and manage networks within the organization or globally within the feature domain. Additionally, you will participate in business development and innovation. Testing is a strategic area within Complete Vehicle, with extensive development and substantial challenges expected in the next five years.
Your future team
At Vehicle dynamics and Automation, you will work alongside some of the most accomplished colleagues in the industry. Our skilled and dedicated team consists of ADAS, Brake, Ride, and Handling feature validation engineers and test engineers. We are all working towards the same goal – to make our customers happy. If you are driven to create a better, safer, and more sustainable future, this is the right place for you.
Your background
M.Sc. degree in Mechanical Engineering or similar, or equivalent professional experience. You have at least 5 years of working experience in vehicle dynamics as an engineer or as feature engineer or as test engineer. Furthermore, you have:
* Good understanding of transport effectiveness customer feature
* Good knowledge of truck application and customer usage.
* Knowledge about agile way of working
* A holistic view, strong communication skills, the ability to work cross-functionally, and the ability to build strong relationships with stakeholders. 
* Proactiveness, flexibility, and a strong motivation to learn. 
* Good verbal and written communication skills in English.
* Additionally, having a C/CE License would be considered a plus.

Ready for the next move?
Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Don’t hesitate to reach out to us if you have any questions! Please contact Rajesh Gnanasingh, Group Manager Vehicle Dynamics & Automation, [email protected].
We value your data privacy and therefore do not accept applications via mail. 
 Who we are and what we believe in 
Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination.
Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 
Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Technical writer and illustrator

Job description Do you like describing complex technology in a simple way through text and illustrations? Do you have a feeling for user-friendliness and information flow? Do you want to work with new exciting technical products before they reach the market? Do you want to be part of a growing global product information provider? Then you would probably be perfect to join our growing team and help develop, update, and maintain information of various sor... Visa mer
Job description

Do you like describing complex technology in a simple way through text and illustrations?
Do you have a feeling for user-friendliness and information flow?
Do you want to work with new exciting technical products before they reach the market?
Do you want to be part of a growing global product information provider?

Then you would probably be perfect to join our growing team and help develop, update, and maintain information of various sorts for several customers in Gothenburg, and further afield.









Basic qualifications
Previous work experience with technical writing and technical illustrations
Fluent in Swedish and English
Experience in creating technical illustrations from CAD models









Preferred additional skills, personal traits, experience
Previous experience within automotive aftermarket industry
Experience in PLM systems, for example, Teamcenter, Windchill
Experience in InDesign or FrameMaker
Experience in XML-based writing tools
Experience in Illustrator, CorelDRAW, or similar
Excellent problem-solving skills and attention to detail
Strong communication and interpersonal skills









We offer

At Sigma Technology, we put you as a consultant in focus. We offer you good opportunities for development and a variety of assignments and customers, as well as offering events and benefits that suit you personally.









Contact

For more information please contact

Viktor Karlsson,
+46 706 577503
[email protected] Visa mindre

Project Manager - Instrumentation & Test Systems

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. AVL List Nordiska works within Instrumentation & Test Systems on the Scandinavian mar... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

AVL List Nordiska works within Instrumentation & Test Systems on the Scandinavian market and have 30 employees in Gothenburg and Stockholm. To our Gothenburg office we are looking for a motivated Project Manager to strengthen our local team. In this role you will be leading customer projects as part of AVL’s global project organization and our multinational team. 
If the responsibilities below attract you and you have the right profile please do not hesitate to apply.
* Project responsibility vis-à-vis customers and the business unit from signing of the contract until ?nal acceptance.
* Early involvement in quotation development
* Project tracking and reporting to stakeholders (Budget, Timing, Quality)
* Leading the project team within the framework of AVL’s global project organization
* Assignment and steering of local suppliers
* Coordination of activities at our customer’s sites
* Responsibility for the success of the project and customer satisfaction

* University degree in Engineering
* Experience as (sub-)project manager - preferable within relevant areas
* Excellent communication and presentation skills in English and Swedish
* High level of integrity, responsibility, and goal-orientation
* Pronounced social and intercultural skills
* Driving license Visa mindre

AUTOSAR Engineer – Exciting Opportunity with a Leading Automotive Client!

Arbetsbeskrivning Are you passionate about automotive technology and skilled in embedded systems? Do you have experience with AUTOSAR architecture and a drive to develop cutting-edge solutions for the future of mobility? If so, we have the perfect opportunity for you! We are currently seeking a talented AUTOSAR Engineer to join our team and collaborate with one of our top automotive clients. In this role, you will play a key part in shaping the next gener... Visa mer
Arbetsbeskrivning
Are you passionate about automotive technology and skilled in embedded systems? Do you have experience with AUTOSAR architecture and a drive to develop cutting-edge solutions for the future of mobility? If so, we have the perfect opportunity for you!

We are currently seeking a talented AUTOSAR Engineer to join our team and collaborate with one of our top automotive clients. In this role, you will play a key part in shaping the next generation of automotive technology, working on the design, development, and integration of advanced software solutions for vehicles.

Key Responsibilities:

- You will be responsible for developing, configuring, and integrating AUTOSAR software components for Electronic Control Units (ECUs).
- You will collaborate closely with cross-functional teams to ensure seamless software integration and compliance with AUTOSAR standards.
- Part of your role will involve analyzing and optimizing the performance, safety, and reliability of the software, ensuring it meets industry standards.
- You will work directly with hardware teams to guarantee the compatibility and efficiency of solutions.
- Additionally, you will troubleshoot, debug, and resolve complex issues related to embedded systems, ensuring a smooth development process.




Din Profil
Key Qualifications:

- We are looking for someone with a degree in Computer Science, Electrical Engineering, or a related field.
- You should have proven experience with AUTOSAR development and architecture.
- Strong proficiency in C programming and embedded systems is essential, along with hands-on experience with AUTOSAR configuration tools such as Vector DaVinci or EB Tresos.
- Familiarity with automotive communication protocols (e.g., CAN, LIN, FlexRay) will be a valuable asset.
- Experience with functional safety standards like ISO 26262 is a plus.
- We value strong problem-solving skills, and you should be comfortable working both independently and as part of a collaborative team.
- Excellent communication skills in English, both written and verbal, are essential.


Om företaget
Why Join Us?

This is an exciting opportunity to work with cutting-edge automotive technologies in a fast-evolving industry. You’ll be collaborating with a world-leading automotive client on high-impact projects while enjoying a dynamic and supportive work environment. They offer a competitive salary and benefits package, along with numerous opportunities for professional growth and career development.



Kontaktuppgifter
Apply Today! If you're ready to take the next step in your career and contribute to groundbreaking automotive innovation, we’d love to hear from you.

We are collaborating with Autorekrytering. Questions regarding the position will be answered by the responsible recruiters, Kajsa Fyhr and Clemens Döring. We look forward to receiving your application. Visa mindre

ADAS Lead Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit an ADAS Lead Engineer. Responsibilities • Set test strategy and test plan in discussion with project management, function & system owners and interface departments. • Engage in requirement management activi... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit an ADAS Lead Engineer.
Responsibilities
• Set test strategy and test plan in discussion with project management, function & system owners and interface departments.
• Engage in requirement management activities that involve thoughtful reviews, innovative design, and collaborative discussions with fellow function owners, attribute leaders, and valued suppliers.
• Follow up on issues and secure execution according to test plan, report to project.
• Your role will encompass ensuring full compliance of the functions with all EU legal and EU NCAP rating requirements.
• Establish way of working together with chosen supplier and development teams.
• Support testers with function verification and verification methods.
• Lead the work in direction of virtual simulation
• If you have the interest, you have the chance in Advanced Engineering projects to research on new technology
Knowledge / Experience
• Extensive experience within ADAS/AD including years working with function verification & validation, EU legal requirements, homologation.
• Driver’s license valid in Sweden is a must.
• Good knowledge of ADAS behavior in complete vehicle and competitor solutions.
• Understand the impact on ADAS functions for the European customer.
• Experience form ADAS function development and V&V.
• Knowledge of Canalyzer, Canoe, Systemweaver.
• Good knowledge in ISO26262 from V&V perspective.
•Experience within verification & validation of ADAS/AD systems
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Projektledare till fordonsindustrin

Du har relevant ingenjörsutbildning och trivs bäst i att arbeta i ett team med resultat- och leveransfokus. Erfarenhet från uppdragsledning och Catia V5 är meriterande. För att lyckas i rollen ser vi att du är kommunikativ, har en positiv inställning, arbetar strukturerat och gillar att hantera många frågeställningar samtidigt. Är du en person med härligt driv som älskar att ta på dig stort ansvar med de utmaningar som följer? Som uppdragsledare inom lätta... Visa mer
Du har relevant ingenjörsutbildning och trivs bäst i att arbeta i ett team med resultat- och leveransfokus. Erfarenhet från uppdragsledning och Catia V5 är meriterande. För att lyckas i rollen ser vi att du är kommunikativ, har en positiv inställning, arbetar strukturerat och gillar att hantera många frågeställningar samtidigt.
Är du en person med härligt driv som älskar att ta på dig stort ansvar med de utmaningar som följer? Som uppdragsledare inom lätta fordon ansvarar du för att driva projekt, från färdigt koncept till införande i produktion. Du kommer att leda ett tvärfunktionellt team och ansvara för tid, teknik och kostnader inom givna ramar. Omvärldsbevakning i form av att studera, värdera och analysera konkurrentutveckling är en annan viktig del i rollen. Du kommer också ha ett nära samarbete med leverantörer och deltaga i den interna strategi- & verksamhetsutvecklingen. Visa mindre

Technical Lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Technical Lead for Vehicle Platform. The role In this role you will be part of a team that will have the responsibility to develop and maintain electrical HIL rigs (Hardware in the Loop) at component and D... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a Technical Lead for Vehicle Platform.
The role
In this role you will be part of a team that will have the responsibility to develop and maintain electrical HIL rigs (Hardware in the Loop) at component and Domain level. Our HILs are used for Integration and verification of both HW and SW in early phases. The purpose of HIL is to stimulate the system and its components to believe they are in a real vehicle with all their dynamics. This is achieved by simulating environmental models that execute in real time on Vector tools. We secure that the HIL rigs can be updated with new technology to support future projects such as electrification and autonomous vehicles.
As a Technical Lead you will work in a cross functional HIL team, with continuous improvements regarding test automation, modeling in Simulink and integration of HIL solutions.
Main responsibilities
·Initiate, lead and drive the building, developing, maintaining and testing of HIL rigs for the vehicle platform
· Support in performing verification in vehicles at system or functional level
·Be part of team efforts to develop solutions across platforms
·Commission of test objects – HiL rigs
·Fault tracing and fixing of hardware, including simulators, harnesses, and test objects.
·Administration-support and assistance (connect cables, fetch equipment, get packages etc)
·Do involved in HIL solutions.
·Maintenance of hardware
Requirements
•Master’s degree or B.Sc. grade within electronics, physics, mechatronics or a similar education.
•At least 5 years of relevant work experience
Knowledge/skills
·Experience in development of electronic components and systems both HW and SW
·Worked with HIL and automated test systems in Vector rigs.
·Experience from any of the following domains is added advantage:
-Hybrid and/or electric vehicle development
-Brake systems
-Steering systems
-Climate systems
-Side and roof systems (Doors, sunroof, Trailor module, etc)
-Body control and road contacts (Suspension and TPMS)
· Experience working with scripting and test automation in Python, Carmaker.
·Vehicle communication (CAN, LIN, ETH) or other communication protocols
·Experienced with CANoe (making configurations and data analysis)
·Familiar with:
-Building Vector HW (VT Rack, compatible IO boards)
-Power supplies and control
Tools
· DSA
· CANalyzer/CANoe
· vTESTstudio
· Carmaker
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Electrical HW Component Owner

Ansök    Sep 24    Integro Consulting AB    Fordonsingenjör
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of our Integro team but working as a consultant out on customer site. Work Description: Write Technical Regulation according to requirements and lead the testing of the electrical components Follow up the technical development and quality of the component together with the supplier. Provide installation requirements to the team res... Visa mer
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of our Integro team but working as a consultant out on customer site.
Work Description:
Write Technical Regulation according to requirements and lead the testing of the electrical components
Follow up the technical development and quality of the component together with the supplier.
Provide installation requirements to the team responsible for packaging and installation.
Validate documentation relating to the components, according to the system requirements.
Perform the corresponding HW releases according to the project plan and make sure deliveries are on time.
Coordinate overall quality activities for the component and resolve any issues that might appear.
Lead and propose quality and cost improvement actions


Education:
You have a degree in Electronics, Mechatronics or similar
Competences:
At least 3 years’ experience of Product Development preferably in the automotive industry.
Technical experience of Electrical & Electronics Systems
You have experience of coordinating and leading technical project in a global environment
Used to following a process plan within R&D

Skills:
Great communicational skills, written and oral
Organized and work in a structured way
Open minded and flexible
Creative and a solution finder
Technique focused
You enjoy working in a global environment with people from various countries and cultures.
Driven and good at networking
QDCF
Leadership skills
Customer oriented and with a business mind set Visa mindre

HIL Engineer

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a HIL Engineer for Vehicle Platform. The role In this role you will be part of a team that will have the responsibility to develop and maintain electrical HIL rigs (Hardware in the Loop) at component and Dom... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continuous grow Tata Technologies Nordics AB is now looking to recruit a HIL Engineer for Vehicle Platform.
The role
In this role you will be part of a team that will have the responsibility to develop and maintain electrical HIL rigs (Hardware in the Loop) at component and Domain level. Our HILs are used for Integration and verification of both HW and SW in early phases. The purpose of HIL is to stimulate the system and its components to believe they are in a real vehicle with all their dynamics. This is achieved by simulating environmental models that execute in real time on Vector tools. We secure that the HIL rigs can be updated with new technology to support future projects such as electrification and autonomous vehicles.
As a HIL Engineer you will work in a cross functional HIL team, with continuous improvements regarding test automation, modeling in Simulink and integration of HIL solutions.
Main responsibilities
·Initiate, lead and drive the building, developing, maintaining and testing of HIL rigs for the vehicle platform
· Support in performing verification in vehicles at system or functional level
·Be part of team efforts to develop solutions across platforms
·Commission of test objects – HiL rigs
·Fault tracing and fixing of hardware, including simulators, harnesses, and test objects.
·Administration-support and assistance (connect cables, fetch equipment, get packages etc)
·Do involved in HIL solutions.
·Maintenance of hardware
Requirements
•Master’s degree or B.Sc. grade within electronics, physics, mechatronics or a similar education.
•At least 5 years of relevant work experience
Knowledge/skills
·Experience in development of electronic components and systems both HW and SW
·Worked with HIL and automated test systems in Vector rigs.
·Experience from any of the following domains is added advantage:
-Hybrid and/or electric vehicle development
-Brake systems
-Steering systems
-Climate systems
-Side and roof systems (Doors, sunroof, Trailor module, etc)
-Body control and road contacts (Suspension and TPMS)
· Experience working with scripting and test automation in Python, Carmaker.
·Vehicle communication (CAN, LIN, ETH) or other communication protocols
·Experienced with CANoe (making configurations and data analysis)
·Familiar with:
-Building Vector HW (VT Rack, compatible IO boards)
-Power supplies and control
Tools
· DSA
· CANalyzer/CANoe
· vTESTstudio
· Carmaker
If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you.
Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

Electromechanical Design Engineer

Ansök    Sep 25    Incontext AB    Fordonsingenjör
At inContext we believe that passion creates an added value. For us, that passion is co-creating the latest technology with amazing people. We love developing both. Electromechanical Designer Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical de... Visa mer
At inContext we believe that passion creates an added value.
For us, that passion is co-creating the latest technology with amazing people.

We love developing both.

Electromechanical Designer

Are you an electromechanical designer passionate about innovation and product development in the automotive industry? Do you want to be part of a dynamic, forward-thinking consultancy where you can shape impactful solutions? We’re seeking an electromechanical designer to take ownership of cutting-edge projects that drive change in automotive technology.

What You’ll Do:

• Design Innovative Solutions: Take full responsibility for developing high-quality electromechanical systems that meet technical and project requirements.
• Tackle Diverse Projects: Engage in a variety of exciting challenges, from electrical installations to 3D routing, constantly expanding your expertise.
• Work on Advanced Automotive Solutions: Engage in cutting-edge electromechanical projects that drive the future of mobility.
• Collaborate Across Teams: Partner with internal teams, clients, and stakeholders to ensure seamless communication and project alignment.
• Solve Technical Challenges: Dive into complex problems, conducting research and consulting experts to find innovative, practical solutions.
• Lead Presentations & Updates: Share your vision in team meetings and client discussions, articulating technical concepts with clarity and confidence.
• Consulting Flexibility: Enjoy working on a variety of projects, gaining experience across different products and technologies while adapting to dynamic client needs.

What You Bring:

• About 2 years of experience in electromechanical design within a European organization, ideally within the automotive industry.
• Proficiency with 3D design programs such as Catia, Creo, NX or similar
• Expertise in product development, especially in R&D settings.
• Proven ability to own the entire design process from research to delivery.
• Strong verbal and written communication skills
• A proactive mindset that drives you to find the best solutions and manage projects autonomously.

What do we offer?

• Flexible Work Options: We support a balanced work-life approach, giving you the flexibility to manage your time and projects effectively.
• Social & Knowledge Sharing: Take part in regular social activities and continuous knowledge-sharing sessions, helping you connect with colleagues and grow professionally.
• Flat and Open Culture: Enjoy being part of a flat organization with open communication, honest relations and where everyone’s voice is heard.
• Innovate in Automotive: Work on breakthrough technologies that are shaping the future of mobility and electrification.
• Personal development: challenging tasks and a possibility to influence the company
• Make a Difference: Your designs will play a key role in shaping the future of automotive electrification, contributing to a more sustainable and innovative mobility landscape.
• Varied Project Experience: Broaden your expertise by working with different clients, industries, and cutting-edge products.

If you have any questions or concerns, please do not hesitate to contact us.

Welcome with your application! Visa mindre

Design Engineer Wiring Harness

Ansök    Sep 24    Integro Consulting AB    Fordonsingenjör
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry. Job description: The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you w... Visa mer
We are currently looking for a Wiring Harness Design Engineer for our client in the automotive industry.
Job description:
The design engineer will be designing harnesses, flexible PCBs and high current/high voltage busbars. The design work also includes plastic/steel fasteners, isolators/protection covers and other parts for the battery disconnect unit (BDU) for both low and high voltage applications. The work will be carried out in an agile team and you will report to Scrum master and Product Owner.
Experience required:
-Minimum 3 years of experience designing electromechanical components such as harnesses, PCB, busbars, distributions boxes, metallic and plastic fasteners.
-Experience from working within automotive industry/product development systems.
-Experience from packaging work in tight and complex environments using CATIA V5 and/or Creo with harness module/flattening and Teamcenter.
Skills required:
-Skilled in Catia V5 and/or Creo
-Ability to work in agile teams planning the work and estimating own workload.
-Minimum BSc in Electrical or Mechatronical Engineering or equivalent
-Fluent in English both spoken and written
-Excellent communicational skills and ability to work in a global environment
-Teamplayer who easily can collaborate with others.
Additional info:
We schedule interviews on a rolling basis so do not wait until end date. Visa mindre

Component Owner of Elecrical Components

Ansök    Sep 24    Integro Consulting AB    Fordonsingenjör
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment. Work Description: Write Technical Regulation according to requirements and lead the testing of the electrical components Follow up the technical development and quality of the component together with the supplier. Provide installation requirements to the team responsible for pac... Visa mer
We are now looking for a Component Owner for our client within the automotive industry here in Gothenburg. You will be a part of a team working with components within infotainment.
Work Description:
Write Technical Regulation according to requirements and lead the testing of the electrical components
Follow up the technical development and quality of the component together with the supplier.
Provide installation requirements to the team responsible for packaging and installation.
Validate documentation relating to the components, according to the system requirements.
Perform the corresponding HW releases according to the project plan and make sure deliveries are on time.
Coordinate overall quality activities for the component and resolve any issues that might appear.
Lead and propose quality and cost improvement actions

Education:
You have a degree in Electronics/Mechatronics or similar
Competences:
At least 3 years’ experience of Product Development preferably in the automotive industry.
Technical experience of Electrical & Electronics Systems
You have experience of coordinating and leading technical project in a global environment
Used to following a process plan within R&D
Skills:
Excellent communicational skills, written and oral
Proactive
Organized and work in a structured way
Open minded and flexible
Creative and a solution finder
Customer focus
You enjoy working in a global environment with people from various countries and cultures.
Driven and good at networking
QDCF
Leadership skills
Customer oriented and with a business mind set Visa mindre

System Verification Engineer-Charging

Ansök    Sep 24    Integro Consulting AB    Fordonsingenjör
We are now looking for a System Verification Engineer within Charging & Traction Voltage System for our client within the automotive industry. You will be working as a consultant in a team out on customer site. The electromobility system testing includes traction voltage system (involving analogue measurements) and functional/software testing. Experience required: -B.Sc in Electrical engineering or similar education or equivalent experience - A f... Visa mer
We are now looking for a System Verification Engineer within Charging & Traction Voltage System for our client within the automotive industry. You will be working as a consultant in a team out on customer site. The electromobility system testing includes traction voltage system (involving analogue measurements) and functional/software testing.
Experience required:
-B.Sc in Electrical engineering or similar education or equivalent experience
- A few years of experience working with electromobility, power electronics and verification and measurement techniques in function verification and electromobility systems is a must, preferably within the automotive industry.
-Experience of test automation and how to make testing efficient and effective.
-Experience of verification within traction voltage systems.
-Used to working Agile according to SAFe
-A plus if you have experience with charging communication protocols.
Skills required:
-Skilled in Electromobility components and system knowledge with emphasis on software functionality.
-Test method development and ability to verify the results.
-Skilled in electromobility system testing.
-You are systematic, organized and work in a structued manner with great ability to plan and execute in a timely manner.
-Driven and has the ability to take decisions based upon facts and engineering judgement.
- Result oriented and up to challenging the current normal
- Fluent in English both spoken and written. Visa mindre

Software Engineer - Matlab/Simulink

Ansök    Sep 24    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Our client is now looking for one skilled software engineer to support/complete their EATS & Combustion Control team. They are responsible for new functions regarding combustion and emissions on petrol and hybrid engines. They develop, test and validate functions in the engine control software. They work in close collaboration with the EATS & Start Calibration team and their Combustion Calibration team, those teams are also their main stakeholders when specifying the requirements for the functions they develop. Joining them, you will get engineering tasks that challenge you to continue your tech skills.

Do you fit the profile?

• B.Sc./ M.Sc. in Mechanical, Physics, or Electrical Engineering, or equivalent You have a passion for cars and internal combustion engines
• Strong programming skills and experience preferably in Python, Matlab/Simulink and any other language is a plusExperience in QTronics Silver/TestWeaver is meritorious
• Experience in writing your own scripts for data analysis, calibration and optimization in Matlab/Simulink and/or Python
• Good knowledge of internal combustion enginesWriting technical documentation
• Fluent in English (written and spoken)
• Driver’s licence(B-level, passenger car)

Appreciated qualifications

• Theoretical courses in combustion engines, software programming and electronics
• Experience in Model Based Calibration and Optimization of combustion engines
• Experience in ETAS INCA software

Personal qualities

• Self-driven with a positive attitude
• Strong analytical skills as well as being able to execute some tests “hands-on”
• You plan, conduct, summarise and report your work in a structured and thorough manner

Who we are
At Mpya Sci & Tech, we believe in a sustainable work life where we together build a culture where you can: Be excitedly curious, Be inclusive and allowing, and Be who you are.

What characterizes us is curiosity, inclusive leadership, and a permissive environment where everyone is allowed to be who they are. Is this something you want to be part of and contribute to? If you are looking for an employer characterized by a strong culture and with favorable conditions for you as a consultant, then you have probably found the right place!

Application
Does this sound like the opportunity you’ve been waiting for? Please go ahead and apply! Visa mindre

Studio Design Engineer - Automotive Exterior Lighting

Ansök    Sep 24    Blue Eye AB    Fordonsingenjör
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients. As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiv... Visa mer
Blue Eye offers creative solutions through engineering expertise. We carry our experience and knowledge with the best professionals in different disciplines to offer optimal solutions to our clients.


As an employee or a sub-contractor, working within the Blue Eye family, we encourage you to share your ideas and experiences. This enables our teams to increase their knowledge and deliver high quality product development as well as strengthen our competitiveness as a company.


 




Description
At Blue eye Engineering AB, We are more than a product development company, we offer R&D services and high qualified engineers to contribute towards Automotive engineering development and innovations in Europe.

With offices established in Sweden, Italy, India and Mexico we are proud to stamp global footprint delivering quality products and solutions in Automotive R&D. Our promise is to provide the foundation and stepping stones for your future career development in automotive engineering industry.

We have open position for consultant role to work direct onsite as "Studio Engineer for Automotive Exterior Lighting" to work for a premium electric car brand in Gothenburg-Sweden.

Tasks

Translating engineering requirement into design possibilities
Transferring and describing engineering and key legislative requirements to design
Generate feasible solutions for technically challenging areas
Managing and documenting agreements between design and engineering
Being the voice of design, communicating design intents and needs within engineering
Understand and implement technical input and limitations in the design models
Document feasibility of design themes and raise critical issues
Arbitrate, drive and document agreements between engineering and design departments.
Set up new light concepts in Catia and optical software
Secure up-to date competence in continuity. i.e Benchmark all competitors.
Tech scouting and arranging presentations/workshops with innovation companies and suppliers within the lighting field
Be updated on existing manufacturing methods and technologies

Qualifications
Automotive design studio is Mandatory.
Very deep lamp technology, engineering, and legal requirement knowledge
Mandatory Automotive product concept and component design experience on exterior lighting.
Mandatory optical software experience (SPEOS, Lucidshape, Light tools)
Complete understanding of vehicle development process.
Very good Catia and Teamcenter experience
Technical university or equivalent, +15 years solid working experience from automotive industry is required.
Extensive automotive lamp concept engineering experience with an appreciation for aesthetic challenges. Experience working in an automotive design studio is Mandatory.
An understanding of the engineering and validation processes for vehicle components and systems.
A working knowledge of component manufacturing, tooling requirements and lead times.

Terms
As a Blue Eye employee, you are not just one of many, you´ll be part of our family.


We believe that the happier you are at your work, the better performance you´ll have. We achieve this through constantly and carefully listening to the needs of each of our employees.


For Blue Eye the most important thing is our employees, therefore we give constant training in different topics, as well as constantly looking for benefits that actively increase employee satisfaction.


We always have challenging assignments waiting for skilled and dedicated engineers, so we invite you to join the team and be part of our family. Visa mindre

Test Development Engineer

Ansök    Sep 24    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Vi är Mpya Sci & Tech: ett värderingsstyrt och familjärt konsultbolag som sätter våra anställda främst. Vi letar nu efter Test Development engineers, som vill vara en del av vårt framgångsrika team.

Arbetsuppgifter kan bestå av:

Utveckla och implementera effektiva testfall för att säkerställa högsta kvalitet. Ansvara för att skapa och underhålla automatiserade testskript för att förbättra testprocessens effektivitet. Identifiera, dokumentera och rapportera buggar och andra fel för att underlätta en smidig utvecklingsprocess.

Kvalifikationer

• Erfarenhet av mjukvarutestutveckling och testautomation.
• God kunskap av ett eller flera programmeringsspråk så som: Python, C++
• Kompetens inom testverktyg och ramverk.
• Gärna erfarenhet från fordonsbranschen
• Flytande svenska och engelska i tal och skrift
• B-körkort

Vi erbjuder:

• Möjlighet att arbeta på spännande projekt för olika kunder.
• En dynamisk arbetsmiljö med fokus på professionell utveckling.
• Möjlighet att påverka och forma din egen karriär inom vårt konsultbolag.

Våra värdeord: Be excitedly curious, Be inclusive and allowing och Be who you are!

Kontakt

För frågor om tjänsten är du varmt välkommen att kontakta Talent Advisor, Maja Palmqvist, [email protected]. Vi arbetar med löpande urval så dröj inte med din ansökan då tjänsten kan komma att tillsättas före sista ansökningsdag. Ansökan till tjänsten görs via www.mpyascitech.com Visa mindre

Service Engineer, Emissions

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. Today we are 8 Service Engineers at our sales and service office in Gothenburg. To ou... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

Today we are 8 Service Engineers at our sales and service office in Gothenburg. To our Service organization we are looking for a Service Engineer that mainly will work with our emission measurement systems/products at our customers. You will work with support, maintenance, calibration, and commissioning assignments at customer sites mainly in the Gothenburg region but also in other parts of Sweden and the Nordic Countries.

* You need to aim for achieving maximum customer satisfaction. 
* Work with several assignments. This requires ability to prioritize, be flexible and work independently. 
* The work involves collaboration with customers and colleagues from AVL, teamwork. 
* Understand customer’s processes and system/equipment.

* Service minded 
* Good social and communication skills 
* Good knowledge in English and Swedish, both verbally and in writing. German is an advantage. 
* IT software skills
* Hardware (mechanical and electrical) skills
* Advantage if experienced within emission measurement equipment, AVL products and engine and powertrain/transmission testing 
* The service will involve travel mainly in the Nordic countries, but also to other countries as we are a part of AVL Europe
* Driver’s license "B" Visa mindre

Senior Lighting Engineer - Automotive

Ansök    Sep 20    Explipro Group AB    Fordonsingenjör
Do you have a passion for Cars and design? If you want todesign and develop premium lampsand experience the Swedish work culture and society with great work-life balance, this is the job for you! Requirements - At least 8 years experience in the automotive industry. - Solid Experience from Exterior Lighting projects - Headlamps or Rear lamps - Good understanding how to realize the Design intention in a feasible way. - Well documented Catia V5 and PDM expe... Visa mer
Do you have a passion for Cars and design?
If you want todesign and develop premium lampsand experience the Swedish work culture and society with great work-life balance, this is the job for you!
Requirements
- At least 8 years experience in the automotive industry.
- Solid Experience from Exterior Lighting projects - Headlamps or Rear lamps
- Good understanding how to realize the Design intention in a feasible way.
- Well documented Catia V5 and PDM experience.
- Solid understanding of the vehicle development process.
- Ability to work in cross functional teams and being able to take a leading role.
- Benificial if you have experience from both OEM and Supplier level.
- Fluent in EnglishAbout Explipro
We are located in Göteborg, the center of the Swedish automotive cluster. We are an expanding consulting company with a senior profile in automotive, telecom, medtech and public safety. The average experience is 10 years for our employees. We have a long-term perspective on our employees, investing in competence and with an individual career plan for everyone.
The company and management culture at Explipro are open, non-formal and solution oriented. The company structure is flat. Everyone in our team has a high level of responsibility and mandate and is expected to be able to work autonomously.
This is an international environment, we speak English at Explipro and with our customers. Our core values are helpfulness and simplicity. That is who we are, and we believe that this approach generates good results for all of us - You, Explipro and our customers. It is important that you can appreciate our values and that you are willing to contribute to the development of our company. Visa mindre

Testingenjör för förbränningsmotorer sökes till fordonsjätte

Ansök    Sep 13    Friday Väst AB    Fordonsingenjör
För kunds räkning söker vi nu en testingenjör som ska arbeta med förbränningsmotorer på ett globalt fordonsbolag i Göteborg. Är du en ingenjör med stort intresse för motorer är detta en perfekt möjlighet för dig. Om rollen: Enheten som söker förstärkning arbetar med att utföra motor- och komponenttester för att säkerställa hög kvalitet, tillförlitlighet och lång livslängd i motorerna. Enheten samarbetar tvärfunktionellt med konstruktionsingenjörer, verkst... Visa mer
För kunds räkning söker vi nu en testingenjör som ska arbeta med förbränningsmotorer på ett globalt fordonsbolag i Göteborg. Är du en ingenjör med stort intresse för motorer är detta en perfekt möjlighet för dig.

Om rollen:
Enheten som söker förstärkning arbetar med att utföra motor- och komponenttester för att säkerställa hög kvalitet, tillförlitlighet och lång livslängd i motorerna. Enheten samarbetar tvärfunktionellt med konstruktionsingenjörer, verkstads- och underhållspersonal, testoperatörer och utvecklare av testanläggningar, vilket ger ett brett spektrum av kunskaper och erfarenheter i det dagliga arbetet.

Som testingenjör får du en varierande och dynamisk roll, där du arbetar med dataanalys och inspektion av motorkomponenter i en labbmiljö, detaljerad dokumentation och förberedelser inför testning. Du kommer att driva både långsiktiga och kortsiktiga testuppdrag, från start till mål, med syftet att förbättra både framtida produkter och de som redan är i produktion. I denna roll kommer du att spela en viktig roll i arbetet med att göra motorerna mer driftsäkra, hållbara och bidra till att minska deras klimatavtryck.

Vi söker dig som:
Har en högskoleexamen inom maskinteknik, mekatronik eller motsvarande arbetslivserfarenhet
Erfarenhet av förbränningsmotorer från arbete eller studier.
Har du erfarenhet av mekaniskt arbete i verkstad är det meriterande.
Kan kommunicera obehindrat i svenska i tal och skrift.


Vidare kommer stort vikt läggas vid personlig lämplighet. För att du skall passa i rollen som testingenjör krävs det att du som person är konsultmässig, driven och analytisk. Rollen kräver även att du är flexibel och har lätt för att samarbeta med olika personer i olika konstellationer. Vidare behöver du även vara kommunikativ och anpassa din kommunikation efter mottagaren.

OM ANSTÄLLNINGEN:
Detta är ett konsultuppdrag vilket betyder att du kommer vara anställd av oss på Friday med ambitionen om en överrekrytering till kunden efter 12 månader.



ÖVRIG INFO:
Omfattning: Heltid
Start: Snarast med hänsyn till uppsägningstid
Placering: Göteborg
Rekryteringsansvarig: Gustav Widman, [email protected] 


Ansök genom att klicka på länken nedan. Kom ihåg att vara snabb med din ansökan då vi gör löpande urval av kandidater och att annonsen kan stängs ner innan tjänsten är tillsatt om vi gått över till urvals och intervjufasen.

OM FRIDAY:
Genom att vara en partner både till våra kandidater och kunder strävar vi efter att hitta den bästa matchningen. Det gör vi genom att lära känna våra kunder och kandidater på riktigt! Vi ser självklart till att kunskaps- och erfarenhetskrav matchar, men framförallt lägger vi vikt vid samsyn kring värderingar och företagskultur som båda parter värdesätter.

Vår passion är att hjälpa människor till rätt roll, arbetsplats och sammanhang inom IT och teknik. Därför grundade vi Friday med ambition att hjälpa dig till jobbet som ger dig fredagskänslan – varje dag! Vi riktar oss främst till dig som är i början av din karriär eller studerar vid högskola/universitet inom IT och Teknik. Vår övertygelse är att människor uppnår sin fulla potential när man ser fram emot att gå till jobbet varje morgon. ”Friday – everyday”, hur låter det? Visa mindre

Senior Feature Leader in Transport Effectiveness

. What you will do Are you interested in working with the complete vehicle in a wide range of different products? Do you have a passion for customer success and product performance? Then this might be a perfect position for you, so keep reading! There is now an opportunity for you to join us in the Vehicle dynamics and Automation team within Complete Vehicle, as Senior Feature Leader Transport effectiveness. In this role, you are responsible for leading... Visa mer
.

What you will do
Are you interested in working with the complete vehicle in a wide range of different products? Do you have a passion for customer success and product performance? Then this might be a perfect position for you, so keep reading! There is now an opportunity for you to join us in the Vehicle dynamics and Automation team within Complete Vehicle, as Senior Feature Leader Transport effectiveness. In this role, you are responsible for leading transport effectiveness customer feature area.

Your main task includes Define requirements and verification methods in order to verify and validate the feature level agreed on by the project description. Translate the product targets into quantifiable product requirements together with the project team. Create verification & validation plan for the feature in projects. Secure, maintain, and develop the feature knowledge over a longer time period for different brands, segments, markets & applications. Drive the feature development across the organization. Lead a defined Feature area with varied technical complexity. Synchronize the feature between projects. Secure translation of customer usage and their requirements by continuously updating test methods or design requirements. Secure brand, segment, and application distinction for features.

Secure feature development plans and provide input to feature roadmaps. Manage networks across the organization or globally within the feature domain. Participate in the business development and innovation. Testing is the heart of Complete Vehicle, and it is a strategic area where extensive development and substantial challenges will happen in the coming 5 years.

Your future team
At Vehicle dynamics and Automation, you will work alongside some of the most accomplished colleagues in the industry. Our skilled and dedicated team consists of ADAS, Brake, Ride, and Handling feature validation engineers and test engineers. We are all working towards the same goal – to make our customers happy. If you are driven to create a better, safer, and more sustainable future, this is the right place for you.

Who are you?

M.Sc. degree in Mechanical Engineering or similar, or equivalent professional experience.
You have at least 5 years of working experience in vehicle dynamics as an engineer or as feature engineer or as test engineer
Good understanding of transport effectiveness customer feature
Good knowledge of truck application and customer usage.
Knowledge about agile way of working
A holistic view, strong communication skills, the ability to work cross-functionally, and the ability to build strong relationships with stakeholders. 
Proactiveness, flexibility, and a strong motivation to learn. 
Good verbal and written communication skills in English
Furthermore, having a C/CE License would be considered a plus. 

What’s in it for you?

We offer a solid package of compensation and benefits, plus you will enjoy:  

•    Positive work environment that enables work life balance
•    Working along side of accomplished engineers who collaborate very closely within team, sharing and learning from each other and also helping each other.  
•    Opportunity for life long learning and grow your career
•    Working in activity based workspace which offers huge possibility for flexibility in the way you work. 

Ready for the next move?

Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Don’t hesitate to reach out to us if you have any questions! Please contact Rajesh Gnanasingh, Group Manager Vehicle Dynamics & Automation, [email protected].



We value your data privacy and therefore do not accept applications via mail. 

Applying to this job offers you the opportunity to join Volvo Group. Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. 

Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Visa mindre

Projektledare och Koordinatorer mot fordonsindustrin

Ansök    Sep 6    Alten Sverige AB    Fordonsingenjör
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin? Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling. VAD ERBJUDER VI?  Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olik... Visa mer
Är du projektledare eller koordinator och är intresserad av att jobba inom fordonsindustrin?

Vi söker nu för kommande behov projektledare, koordinatorer och drivna ingenjörer som vill jobba mot våra fordonskunder med koordinering & projektledning mot produktutveckling.

VAD ERBJUDER VI? 

Varje medarbetare är lika viktig i ALTENs framgång! Vi tror på att växa tillsammans genom att erbjuda möjligheter, utveckling och gemenskap. ALTEN verkar inom flera olika branscher, har en stor variation av uppdrag, coachande chefer och utbildning via ALTEN Academy vilket gör att det alltid kommer vara möjligt att utvecklas hos oss. Dina önskemål styr din väg framåt.  

 

Som konsult får du både en teamkänsla i ditt uppdrag och en riktigt härlig gemenskap på ALTEN. Genom våra interna nätverk såsom Women@ALTEN och ALTEN Sports ges du möjlighet att driva frågor och aktiviteter som just du brinner för. På ALTEN tycker vi det är viktigt med balans mellan arbete och fritid, därför erbjuder vi tre extra lediga dagar per år. Hos oss är du ansluten till kollektivavtal och erbjuds förmåner så som friskvårdsbidrag, tjänstepension och försäkringar.  


ÖVERGRIPANDE KUNSKAPER/ERFARENHETER/PERSONLIGA EGENSKAPER:
Erfarenhet från Produktutveckling (Fordon är meriterande).
Har du jobbat med komplettbil/komplettvagn är det meriterande.
Gillar att vara spindeln i nätet.
Erfarenhet från planering, rapportering av projektstatus och teknikmognad i projekt, finansiell uppföljning.
Van att arbeta med olika projektmodeller och agila metoder.
MSc/BSc inom maskinteknik, elektro, Ind E eller liknande.
Du bör vara driven, engagerad, social och service minded.

OM ALTEN

ALTEN är ett av Europas största konsultbolag inom teknik, IT och Life Sciences med över 54 000 anställda i fler än 30 länder. Vi är en global aktör med lokal närvaro, med 1400 engagerade kollegor från Lund i söder till Skellefteå i norr. Våra ingenjörer utför komplexa och mycket tekniska projekt genom hela produktutvecklingskedjan hos de främsta företagen inom flera olika branscher såsom Fordon, Flyg & Försvar, Energi, Industri, Offentlig sektor och Life Sciences.

 

ALTEN har i fyra år i följd utsetts till en av Sveriges mest attraktiva arbetsgivare av Karriärföretagen, en utmärkelse för arbetsgivare som erbjuder unika karriär- och utvecklingsmöjligheter. Visa mindre

Technical Lead

At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg. Responsibilities: Engineer will be working in E-Propulsion areas (Inverter, Battery, Charging) and mainly responsible for Vehicle tests Lead and Set-up testing strategy quickly, ... Visa mer
At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to strengthen our team in Gothenburg.
Responsibilities:
Engineer will be working in E-Propulsion areas (Inverter, Battery, Charging) and mainly responsible for Vehicle tests
Lead and Set-up testing strategy quickly, kick start testing scope for the project both at onsite and offshore teams
Will be firsthand support onsite Sweden and co-ordinate with Tata offshore teams on set-up.
Flexibility to work in different testing areas and varying demands

Mandatory requirements:
Swedish driving license, T1 and T2 license (Preferred)
Strong background and hands on experience in System testing, Function and Vehicle testing
Good hands on experience in setting up and working HIL/SIL test benches (DSPACE)
Knowledge of test tools – Vector tools (Canalyzer, Canoe), Debuggers, INCA Etc.
Experience in test Automation like Vtest Studio, DSPACE Autodesk, Python
Experience in UDS/Diagnostics is a must.
Knowledge of CI tools chain (Jenkins) & test automation would be a plus
Exposure in testing ISO26262 -functional safety requirements
Awareness in Electric Vehicles particularly Powertrain domain (Inverter, Battery, Charging)

Other requirements:
Experience in complete test development cycle (All phases of testing of an ECU)
Good interpersonal and communication skills

If you are passionate about bringing innovation to the projects you work on then we would love to hear from you. Tata Technologies: Engineering a better world.
Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities. Visa mindre

CAE Engineer - Seat systems

Ansök    Aug 27    Volvo Personvagnar AB    Fordonsingenjör
Who are we? Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future. Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding o... Visa mer
Who are we?
Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.
Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent.
We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Seats CAE team

The Seats department is responsible for the interior safety systems. This includes all the seats, airbags and seatbelt systems. The department is now looking to further increase our knowledge and to work towards a Computer Aided Engineering driven development future.
We are now looking for a CAE engineer interested in seat simulations to help us further improve on Volvo’s Safety Vision for future projects.

About us

The main tasks of the CAE team are to support interior and complete vehicle groups with knowledge and CAE models of the seats and restraints. We develop new simulation methods, help develop requirements, interact with suppliers, build models, and perform studies related to our subsystems, both in car projects but also in Advanced Engineering projects.

What you will do

* Simulation and analysis of Seat systems.
* Develop seat models for concept studies and requirement settings.
* Participate in early product development phase as well as in the industrialization phase. 
* Verify CAE models and CAE results.
* Participate in planning and analysis of physical testing.
* Make and present CAE and analysis reports.
* Close cooperation with other teams at Volvo and at suppliers.


You and your skills

You are a team player with strong communications skills and a genuine interest in simulations. You are proactive, a fast learner with an analytical and solution-based mindset. Your technical competence and your interaction with different teams create a great atmosphere for innovative solutions. 

* B.Sc.or M.Sc. in Mechanical Engineering, Applied Physics, Mathematics or equivalent experience.
* Minimum 2 years’ experience of modelling and simulating seat systems.
* Experience from physical testing/CAE validation work.
* Experience with LS-Dyna, Ansa, Primer.
* Fluent in English.
* Foam, composite, and plastic material modelling.
Seating comfort knowledge. Visa mindre

AI Experience Specialist

We are Zeekr Technology Europe. Powered by engineers and creative minds from all over the world. Located in Gothenburg, Sweden, one of the leading mobility innovation grounds worldwide. Established in 2013 as CEVT and began with the mission to create a revolutionary modular vehicle architecture, CMA. As of 2024, CEVT is now Zeekr Technology Europe, signaling our belonging within Zeekr. Delivering intelligent, sustainable, and user centric technology and so... Visa mer
We are Zeekr Technology Europe. Powered by engineers and creative minds from all over the world. Located in Gothenburg, Sweden, one of the leading mobility innovation grounds worldwide. Established in 2013 as CEVT and began with the mission to create a revolutionary modular vehicle architecture, CMA. As of 2024, CEVT is now Zeekr Technology Europe, signaling our belonging within Zeekr. Delivering intelligent, sustainable, and user centric technology and software for tomorrow's electric mobility today.
Join Us as an AI Experience Specialist – Shape the Future of European Intelligent Cockpits
Are you ready to revolutionize the automotive industry with cutting-edge AI? We’re seeking a visionary AI Experience Specialist to lead the development, design, and optimization of AI experiences for European intelligent cockpits. Your work will directly enhance user satisfaction, boost brand competitiveness, and drive product innovation.
What You’ll Do:
Conduct in-depth research on European market trends and user needs to craft long-term strategies and short-term goals for AI-driven cockpit experiences.
Analyze competitor products to identify strengths and opportunities for improvement, providing actionable insights that drive innovation and set new industry standards.
Lead the European team in enhancing the intelligent cockpit experience by establishing AI product standards, aligning with global teams, and conducting regular usability tests to ensure a superior user experience.
Work closely with AI R&D teams in China and Europe to define and execute strategic plans for AI product development over the next 1-3 years, mapping out a clear technology roadmap.
Lead the analysis and planning of innovative features for European cockpit AI, ensuring our products remain at the forefront of technological advancement.

What We’re Looking For:
A background in overseas studies, particularly in AI, human-computer interaction, or user experience design.
8+ years of experience in user experience design and product management within the automotive sector, focusing on AI-driven cockpit projects.
Strong capabilities in product design and industry research, with a proven ability to lead and implement cutting-edge solutions.
Deep understanding of user experience, with sharp insights and the ability to apply relevant research and optimization methods.
Exceptional communication skills, ability to work effectively with diverse teams across different cultures and professional backgrounds.
Fluency in both English and Mandarin is essential.


Why should you join us?
Let's face it, there are plenty of opportunities out there. But here's why joining us is a game-changer:
Culture & Community: We're more than just colleagues—we're a tight-knit community that supports and celebrates each other's successes.
Opportunity for Growth: At Zeekr Tech Eu, your growth is our priority. We provide ample opportunities for learning, development, and advancement.
Impactful Work: Make a real difference! Join us in tackling exciting challenges and contributing to projects that have a positive impact on our customers and society.
Flexibility & Balance: We understand that life happens, which is why we offer flexibility and work-life balance to ensure you can thrive both personally and professionally.
Perks & Benefits: From competitive salaries to awesome perks like 30 vacation days, 8 additional ATK days and an annual STI program to reward your performance, we've got you covered.

Do you want to join us on our journey? Welcome, to contact us for more information:Kristina Larsson Djokovic, Senior Recruiter, [email protected], +46 72 988 85 44, for questions regarding the recruitment process.
Last Application date: 2024-09-23
Apply today, we will perform ongoing selection during the application period. We look forward to hearing from you.
To find out more about Zeekr Tech EU, visit our website. Read more about our recruitment process here.
Please note that due to GDPR, we can only accept applications sent through the recruitment system, not via email or other channels.

#LI-KLD Visa mindre

Project Manager - Instrumentation & Test Systems

AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility. AVL List Nordiska works within Instrumentation & Test Systems on the Scandinavian mar... Visa mer
AVL is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and beyond. The company provides concepts, solutions and methodologies in fields like vehicle development and integration, e-mobility, automated and connected mobility (ADAS/AD), and software for a greener, safer, better world of mobility.

AVL List Nordiska works within Instrumentation & Test Systems on the Scandinavian market and have 30 employees in Gothenburg and Stockholm. To our Gothenburg office we are looking for a motivated Project Manager to strengthen our local team. In this role you will be leading customer projects as part of AVL’s global project organization and our multinational team. 
If the responsibilities below attract you and you have the right profile please do not hesitate to apply.
* Project responsibility vis-à-vis customers and the business unit from signing of the contract until ?nal acceptance.
* Early involvement in quotation development
* Project tracking and reporting to stakeholders (Budget, Timing, Quality)
* Leading the project team within the framework of AVL’s global project organization
* Assignment and steering of local suppliers
* Coordination of activities at our customer’s sites
* Responsibility for the success of the project and customer satisfaction

* University degree in Engineering
* Experience as (sub-)project manager - preferable within relevant areas
* Excellent communication and presentation skills in English and Swedish
* High level of integrity, responsibility, and goal-orientation
* Pronounced social and intercultural skills
* Driving license Visa mindre

Resident Test Engineer

Arbetsbeskrivning Are you a hands-on engineer with a passion for the future of electric vehicles? Tata Technologies is seeking for a Resident Test Engineer to join their team in Sweden and work closely with cutting-edge E-Propulsion technologies, including Inverter, Battery, and Charging systems. Key Responsibilities: Take the lead in vehicle testing for E-Propulsion systems and establish a comprehensive testing strategy. Collaborate with both onsite and... Visa mer
Arbetsbeskrivning
Are you a hands-on engineer with a passion for the future of electric vehicles? Tata Technologies is seeking for a Resident Test Engineer to join their team in Sweden and work closely with cutting-edge E-Propulsion technologies, including Inverter, Battery, and Charging systems.

Key Responsibilities:

Take the lead in vehicle testing for E-Propulsion systems and establish a comprehensive testing strategy.
Collaborate with both onsite and offshore teams to kick-start the testing scope of the project.
Provide onsite support in Sweden and coordinate with Tata offshore teams to ensure smooth project execution.
Adapt to varied testing demands and contribute across different testing areas.

Din Profil
Requirements:

Mandatory: Swedish driving license; T1 and T2 licenses (preferred).
Strong experience in System, Function, and Vehicle testing.
Expertise in HIL/SIL test benches setup (DSPACE).
Familiarity with test tools such as Vector (Canalyzer, Canoe), Debuggers, INCA, etc.
Proficiency in test automation (Vtest Studio, DSPACE Autodesk, Python).
Solid understanding of UDS/Diagnostics.
Knowledge of CI tools (Jenkins) and ISO26262 functional safety requirements.
Prior experience with Electric Vehicle Powertrain systems (Inverter, Battery, Charging).

Om företaget
Why Work With Us?
We offer a stimulating work environment where innovation and technology are at the forefront. Here, you have the opportunity to develop in a role with significant responsibility and impact. We value our employees’ skills and offer continuous development and training to keep you at the cutting edge of the industry.


Tata Technologies (BSE: 544028, NSE: TATATECH) is the strategic engineering partner businesses turn to when they aspire to be better. Manufacturing companies rely on us to enable them to conceptualize, develop and realize better products that are safer, cleaner, and improve the quality of life for all the stakeholders, helping us achieve our vision of #EngineeringABetterWorld.

Kontaktuppgifter
Apply Today!
Submit your application and become part of our dedicated team working on groundbreaking solutions for the future of vehicle technology. We look forward to welcoming you!

We are collaborating with Autorekrytering. Questions regarding the position will be answered by the responsible recruiters, Kajsa Fyhr or Ethan Arancibia. We look forward to receiving your application. Visa mindre

Kravingenjör till automotive-industrin

Ansök    Aug 27    Mpya Sci & Tech AB    Fordonsingenjör
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bo... Visa mer
Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi kallar oss Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt.

På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg och Stockholm. Hos en arbetsgivare i världsklass

Mpya Sci & tech har påbörjat en resa och vi vill att du ska hänga med. Vad som kännetecknar oss är nyfikenhet, inkluderande ledarskap och en tillåtande miljö där alla tillåts var den dom är. Är detta något du vill vara med och bidra till? Letar du efter en arbetsgivare präglad av en stark kultur och med förmånliga villkor för dig som konsult, då har du troligtvis hittat rätt! Vi behöver förstärka vårt team i Göteborg med projektledare inom fordon och det är här du kommer in i bilden.

Vi erbjuder

Stora möjligheter att tillsammans med dina kollegor utveckla Mpya Sci & Tech och komma med idéer och input. Coachning tillsammans med våra Talent Advisors för att se till att du möter dina karriärsmål på bästa sätt genom nya intressanta uppdrag eller genom att ta en större roll inom bolaget. Tillgång till mentorer och nätverk inom din teknikgren där utbyte sker på olika event och gemensamma aktiviteter regelbundet. Vi erbjuder ett konkurrenskraftigt och flexibelt erbjudande där du sätter ramarna för vad som är viktigt för dig och just din livssituation.

Vi söker en erfaren Kravingenjör för en spännande möjlighet inom automotive-industrin till en av våra kunder. Du kommer att spela en nyckelroll i implementeringen av kravhantering från Cradle till Polarion och ta ansvar som huvudkravadministratör i detta projekt.

Dina arbetsuppgifter kommer att inkludera:

• Utveckling och formulering av krav inom både hårdvara och mjukvara.
• Allokering och verifiering av krav samt hantering av verifieringsobjekt.
• Att säkerställa en effektiv kravprocess från start till mål.

Vi söker dig som:

• Har djup förståelse för system- och kravprocesser inom automotive.
• Har erfarenhet av både funktionella och programvarukrav.
• Erfarenhet av Polarion är ett stort plus, men inget krav.

Är du personen som kan ta oss vidare i kravprocessen och säkerställa högsta kvalitet? Då vill vi gärna höra från dig!

Om oss på Mpya Sci & Tech

Mpya Sci & Tech är skapat av och för människor som älskar teknik och naturvetenskap. Vi är inte här för att göra något som alla andra gör. Vi tar nischad rekrytering och konsulting till en ny nivå med fokus på kandidatperspektivet. Det är därför vi är Talent Advisors. Vi tror att de riktiga talangerna är de individer som vågar utvecklas genom hela livet. Med lång erfarenhet och djup kunskap om branschen har vi skapat ett framåtlutat och spetsigt bolag, på vårt sätt. På Mpya Sci & Tech tror vi på ett hållbart arbetsliv där vi tillsammans bygger en kultur med genuin delaktighet, ivrig nyfikenhet och möjlighet att få vara sig själv. Kom och utvecklas ihop med oss i Göteborg, Uppsala och Stockholm. Hos en arbetsgivare i världsklass!

Kontakt

För frågor om tjänsten är du varmt välkommen att kontakta Talent Advisor, Maja Palmqvist, [email protected]. Vi arbetar med löpande urval så dröj inte med din ansökan då tjänsten kan komma att tillsättas före sista ansökningsdag. Ansökan till tjänsten görs via www.mpyascitech.com Visa mindre